NOTE: superseded standards are held in physical form unless an electronic copy is held; in such a case the physical copy is discarded

List of Standards held – Section 31: British, European and International

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS 0 pt 1: 1997 A standard for standards: part 1: Guide to the context, aims and general principles 32

BS 0 pt 2: 1997 A standard for standards: part 2: Recommendations for committee procedures 32

BS 0 pt 3: 1997 A standard for standards: part 3: Specification for structure, drafting and presentation 32

BS 2W 12: 1989 Aerospace Series – Preformed zinc coated carbon steel wire rope 32

CP 3: Chap V: pt 2: 1972 Code of basic data for the design of buildings: Chap V: Loading Part 2: Wind Loads 32

BS MA 29: 1982 Steel wire rope and strand for yachts 32

BS EN 39: 2001 Loose steel tubes for tube and coupler scaffolds – technical delivery conditions 32

BS MA 39-1: 1973 Specification for ships’ ladders: part 1: ladders, steel vertical 32 withdrawn

BS MA 39-2: 1973 Specification for ships’ ladders: part 2: ladders, steel sloping 32 withdrawn

BS MA 39-3: 1973 Specification for ships’ ladders: part 3: ladders, steel dog-step 32 withdrawn

PAS 59: 2014 Specification for collective fall arrest soft landing systems 32

BS EN 131 pt 1: 2015 Ladders – pt 1: Terms, types, functional sizes 32 (Superseded class 2 in BS 1129: 1990 BS 2037:1990)

BS EN 131 pt 2: 2010 +A2: 2017

Ladders – pt 2: Requirements, testing, marking 32 Supersedes class 2 in BS 1129: 1990 BS 2037:1990

DD 133: 1986 Code of practice for strength assessment of members of lattice towers and masts 32 Draft for development

BS EN 280: 2001 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examination and tests

32 Supersedes BS 7171: 1989

List of Standards held – Section 31: British, European and International - continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN 341: 1993 PPE against falls from height – Descender devices 32 superseded by doc following

BS EN 341: 1993 + A1: 1996

PPE against falls from height – Descender devices 32 superseded by doc following

BS EN 341: 2011 Personal fall protection equipment – Descender devices for rescue 31

BS EN 353-1: 2002 PPE against falls from height – Guided type fall arresters part 1: Specification for guided type fall arresters on a rigid anchorage line

31 Superseded by doc following

BS EN 353-1: 2014+A1: 2017

Personal fall protection equipment – Guided type fall arresters including an anchor line Part 1: Guided type fall arresters including a rigid anchor line

31 + National Foreword

BS EN 353-2: 2002 PPE against falls from height – Guided type fall arresters part 2: Specification for guided type fall arresters on a flexible anchorage line

31

BS EN 354: 2010 Personal fall protection equipment – Lanyards 31

BS EN 355: 2002 PPE against falls from height – Energy absorbers 31

BS EN 358: 1993 Personal equipment for work positioning and prevention of falls from a height – Work positioning systems

32 superseded by doc following

BS EN 358: 2000 Personal equipment for work positioning and prevention of falls from a height – Belts for work positioning and restraint and work postitioning lanyards

31

BS EN 360: 2002 PPE against falls from a height – Retractable type fall arresters 31

BS EN 361: 2002 PPE against falls from a height – Full body harnesses 31

BS EN 362: 2004 PPE against falls from a height – Connectors 31

BS EN 363: 2002 PPE against falls from a height – Fall arrest systems 31 superseded by doc following

BS EN 363: 2008 Personal fall protection equipment – Personal fall protection systems 31

BS EN 364: 1993 PPE against falls from a height – Test methods 31

BS EN 365: 2004 AMD 1

PPE against falls from a height – General requirements for instructions for use and for marketing

31

List of Standards held – Section 31: British, European and International - continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS 464: 1958 Thimbles for wire ropes 32

BS EN 516: 1995 Prefabricated accessories for roofing – installations for roof access – walkways treads and steps

32 superseded

BS EN 517: 1995 Prefabricated accessories for roofing – Roof safety hooks 32 superseded

BS EN 516: 2006 Prefabricated accessories for roofing – installations for roof access – walkways treads and steps

32

BS EN 517: 2006 Prefabricated accessories for roofing – Roof safety hooks 32

BS EN 547-1 pt 1: 1997 Safety of machinery – human body measurements – pt1: dimensions for whole body openings

32

BS EN 547-1 pt 2: 1997 Safety of machinery – human body measurements – pt2: dimensions for acess openings

32

BS EN 547-1 pt 3: 1997 Safety of machinery – human body measurements – pt3: anthropometric data 32

BS EN 564: 1997 Mountaneering equipment – Accesory cord – Safety requirements and test methods 32

BS EN 565: 1997 Mountaneering equipment – Tape – Safety requirements and test methods 32

BS EN 566: 1997 Mountaneering equipment – Slings – Safety requirements and test methods 32

BS EN 567: 1997 Mountaneering equipment – Rope clamps – Safety requirements and test methods 32

BS EN 568: 1997 Mountaneering equipment – Ice anchors – Safety requirements and test methods 32

BS EN 569: 1997 Mountaneering equipment – Pitons – Safety requirements and test methods 32

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN 696: 1995 + A1:1996

Fibre ropes for general service – Polyamide 32 partly supersedes BS 4928: 1985

BS EN 697: 1995 + A1:1996

Fibre ropes for general service – Polyester 32 partly supersedes BS 4928: 1985

BS EN 699: 1995 Fibre ropes for general service – Polypropylene 32 partly supersedes BS 4928: 1985

BS EN 700: 1995 Fibre ropes for general service – Polyethylene 32 partly supersedes BS 4928: 1985

BS EN 701: 1995 + A1: 1996

Fibre ropes for general service – General specification 32 partly supersedes BS 2052: 1989 BS 4928: 1985 BS 6033: 1981

BS EN 755-2: 2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 2: Mechanical Properties

32

BS EN 755-7: 2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 7: Seamless tubes, tolerances on dimensions and form

32

BS EN 755-9: 2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 9: Profiles, tolerances on dimensions and form

32

BS EN 795: 1997 + A1: 2000

Protection against falls from height – anchor devices – requirements and testing 31 superseded

BS EN 795: 2012 Personal fall protection equipment - anchor devices 31

BS EN 813: 2008 PPE for prevention of falls from a height – Sit harnesses 31

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN 892: 2004 Mountaineering equipment – dynamic mountaineering ropes – safety requirements and test methods

33

BS EN 919:1995 Fibre ropes for general service – determination of certain physical and mechanical properties 33 Partly supersedes BS 5053: 1985

BS 947: 1970 Specification for a universal system for designating linear density of textiles (tex system) 33

BS 1051: 1992 ISO 6348: 1980

Glossary of terms relating to the mass determination of textiles 33

BS 1129: 1990 + A1, A2

British Standard Specification for: portable ladders, steps, trestles and lightweight stagings 33 superseded

BS 1129: 1990 + A1, A2, A3, A4

Specification for: portable ladders, steps, trestles and lightweight stagings 33 Partly superseded by BS EN 131 pt 1&2: 1993

BS EN 1263-1: 1997 Safety nets part 1 – safety requirements, test methods 33 Partly supersedes BS 8093:1991; superseded by BS 1263-1: 2002

BS EN 1263-1: 2002 Safety nets part 1 – safety requirements, test methods 33

BS EN 1263-2: 1998 Safety nets part 2 – safety requirements for the erection of safety nets 33 Partly supersedes BS 8093: 1991

BS 1397: 1947 British Standard Specification for: safety belts and harnesses 33 withdrawn

BS 1397: 1956 British Standard Specification for: safety belts and harnesses 33 withdrawn

BS 1397: 1967 British Standard Specification for: safety belts and harnesses 33 withdrawn

BS 1397: 1979 British Standard Specification for: industrial safety belts, harnesses and safety lanyards 33 withdrawn

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN 1495: 1998 Lifting platforms – Mast climbing work platforms 33

BS EN 1496: 2017 Personal fall protection equipment – Rescue lifting devices 31

BS EN 1497: 2007 Rescue equipment – rescue harnesses 31

BS EN 1498: 2006 Rescue equipment – Rescue loops 31

BS 1615: 1987 Method for specifying anodic oxidation coatings on aluminium and its alloys 33 Withdrawn, replaced by BS EN 12373-1: 2001

BS 1692: 1998 Specification for gin blocks 33

BS EN 1808: 2015 Safety requirements on suspended access equipment – Design calculations, stability criteria, construction - Tests

33

BS EN 1868: 1997 PPE against falls from a height – List of equivalent terms 31

BS EN 1891: 1998 PPE for the prevention of falls from a height – Low stretch kernmantel ropes 31

BS 2037: 1994 Specification for: Portable aluminium ladders, steps, trestles and leightweight stagings 33 Partly superseded by BS EN 131 parts 1 & 2: 1993

BS 2544: 1987 Determination of thickness of textile materials 33 Withdrawn, superseded by BS EN ISO 5084: 1997

BS 2830: 1994 Specification for: Suspended access equipment (suspended chairs, traditional steeplejack’s seats, work cages, cradles and platforms) for use in the building, engineering construction, steeplejack and cleaning industries

33

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHLFMARK

REMARKS

BS 3226: 1960 Thimbles for natural fibre ropes properties 33

BS 3193: 1982 British Standard Specification for industrial safety nets 33

BS 3367: 1980 Specification for fire brigade and industrial ropes and rescue lines 33 replaced by BS 3367: 1999

BS 3572: 1986 Specification for Access fittings for chimneys and other high structures in concrete or brickwork

33

BS 3678: 1986 Specifcation for Access hooks for chimneys and other high structures in steel 33

BS 3724: 1991 Glossary of terms relating to fibre ropes and cordage 33

BS 4211: 1967 Specification for steel ladders for permanent access 33 replaced by 1987 revision

BS 4211: 1987 Specification for ladders for permanent access to chimneys, other high structures, silos and bins

33 replaced by 1994 revision

BS 4211: 1994 Specification for ladders for permanent access to chimneys, other high structures, silos and bins

33 replaced by 2005 revision

BS 4211: 2005 Specification for permanently fixed ladders 33

BS 4278: 1984 British Standard Specification for eyebolts for lifting purposes 33

BS 4423: 1969 British Standard Specification for climber’s helmets 33 replaced by BS EN 12492

BS EN ISO 4762: 2004 Hexagon socket head cap screws 33

BS 4928: 1985 Specification for man-made fibre ropes 34 replaced by BS ENs 696, 697, 699, 700 & 701

BS 5062: 1973 British Standard Specification for: Self-locking safety anchorages for industrial use 34 withdrawn

BS 5062 pt 1: 1985 British Standard for: Self-locking safety anchorages for industrial use pt 1 – Specification for self-locking safety anchorages and associated anchorage lines

34 withdrawn

BS 5062 pt 2: 1985 British Standard for: Self-locking safety anchorages for industrial use pt 2 – Recommendations for selection, care and use

34 withdrawn

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHLFMARK

REMARKS

BS 5395 pt 2: 1984 Stairs, ladders and walkways – Part 2: Code of practice for the design of helical and spiral stairs

34

BS 5395 pt 3: 1985 Stairs, ladders and walkways – Part 3: Code of practice for the design of industrial type stairs, permanent ladders and walkways

34 Partially superseded by BS EN ISO 14122-1, -2, & -3: 2001

BS 5466 pt 1: 1977 ISO3768: 1976

Methods for corrosion testing of metallic coatings 34 Withdrawn, superseded by BS 7479: 1991 (ISO 9227: 1990)

BS 5531: 1988 British standard code of practice for: Safety in erecting structural frames 34

BS 5655 pt 14: 1995 Lifts and service lifts pt 14: Specification for hand-powered service lifts and platform hoists 34

BS 5750 pt 4: 1994 Quality systems pt 4: Guide to the use of BS EN ISO 9001, 9002 and 9003 34 Withdrawn

BS 5845: 1980 British standard specification for: Permanent anchors for industrial safety belts and harnesses

34 Withdrawn

BS 5845: 1991 British standard specification for: Permanent anchors for industrial safety belts and harnesses

34 Withdrawn

BS 5974: 1990 Code of practice for: Temporarily installed suspended scaffolds and access equipment 34 replaced by 2017 revision

BS 5974: 2017 CoP for Planning, design, setting up and use of temporary suspended access equipment 34

BS 6037: 1990 CoP for: Permanently installed suspended access equipment 34

BS 6180: 1995 CoP for: Barriers in and about buildings 34

BS 6338: 1982 ISO 4520: 1981

Chromate conversion coatings on electroplated zinc an cadmium coatings 34

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS 6399 pt1:1984 Design loadings for buildings pt1: code of practice for dead and imposed loads 34

BS 6399 pt3:1988 Loadings for buildings pt 3: code of practice for imposed roof loads 34

PD 6484: 1979 Commentary on corrosion at bimetallic contacts and its alleviation 34

BS 6668 pt 1: 1986

Textile lifting slings pt 1: specification for lifting slings for general service made from certain natural and man-made fibre ropes

34

BS 6668 pt 2: 1987 Textile lifting slings pt 2: specification for round slings made of man-made fibre for general service

34

BS 6858: 1987 British Standard Specification for: manually operated positioning devices and associated anchorage lines for use with industrial safety belts and harnesses

34

PP 7310: 1990 Anthropometrics – an introduction 34

BS 7323: 1990 Specification for sit harnesses for rock climbing 34

BS 7648: 1993 Double braided ropes made from man-made fibres 34

DD7995: 2003 Specificiation for temporary access platforms – performance, design and test requirements 34 Withdrawn 2012

BS 7818: 1995 Pedestrian restraint systems in metal 34

BS 7883: 1997 +A1, A2

Code of practice for: application and use of anchor devices conforming to BS EN 795 31 Superseded by BS 7883: 2005

BS 7883: 2005 + A1 Code of practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN 795

31

BS 7885: 1997 Code of practice for: safe entry into silos 34

BS 7981: 2002 Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)

34

BS 7985: 2002 Code of practice for the use of rope access methods for industrial purposes 34 Superseded by BS 7985 2009

BS 7985: 2009 Code of practice for the use of rope access methods for industrial purposes 34 Superseded by BS 7985 2013

BS 7985: 2013 Code of practice for the use of rope access methods for industrial purposes - recommendations and guidance supplementary to BS ISO 22846

34

BS EN ISO 8041: 2005

Human response to vibration – measuring instrumentation 35

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS 8093: 1991 Code of practice for: the use of safety nets, containment nets and sheets on constructional works

35 Superseded by BS EN 1263-2: 1998

BS 8110-1: 1997 Structural use of concrete pt 1: code of practice for design and construction 35

BS 8213 pt 1: 1991 Windows, doors and rooflights pt 1: code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)

35 Superseded by later edition

BS 8405: 2003 PPE against falls from a height – descender devices – single-hand operated devices for self or assisted rescue

35 Superseded by later edition

BS 8405: 2003 + A1 :2009

Personal protective equipment against falls from a height – Descender devices – Single-hand devices for self or assisted rescue

35

BS 8437: 2005 Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

37 Superseded by later edition

BS 8437: 2005 +A1: 2012

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

37

BS 8454: 2006 Code of practice for the delivery of training and education for work at height and rescue 35

BS 8500-1:2002 Concrete – complementary BS to BS EN 206-1: pt 1 - method of specifying and guidance for the specifier

35

BS 8513: 2009 Personal fall protection equipment – twin legged energy-absorbing lanyards 31

BS 8539: 2012 Code of practice for the selection and installation of post-installed anchors in concrete and masonry

35

BS 8610: 2017 Personal fall protection equipment – anchor systems - specification 37

BS EN ISO 8750: 2007 Spring type straight pins – coiled, standard duty (Spirol roll pins) 35

BS 8800: 1996 Guide to: occupational health and safety management systems 35

BS 8888: 2017 Technical product dpcumentation and specification (engineering drawings) 36B

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN ISO 9004: 2000 Quality management systems – Guidelines for performance improvements 35

ISO 9004-2: 1991 Quality systems pt 8: Guide to quality management and quality system elements for services 35 current, confirmed

BS EN ISO 9227: 2006 Corrosion tests in artificial atmospheres – Salt spray tests 35 superseded by 2012edn

BS EN ISO 9227: 2012 Corrosion tests in artificial atmospheres – Salt spray tests 35

BS ISO 10013: 1995 Guidelines for developing quality manuals 35 withdrawn

BS EN 10088-1: 2014 Stainless steels Part 1: List of stainless steels 36

BS EN 10088-2: 2014 Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

36

BS EN 10088-3: 2014 Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

36

BS EN 10264-4: 2012 Steel wire and wire products – steel wire for ropes Part 4: Stainless steel wire 36

BS EN 10277-1: 2008 Bright steel products – technical delivery conditions – Part 1: General 36

BS EN 10277-2: 2008 Bright steel products – technical delivery conditions – Part 2: Steels for general engineering purposes

36

BS EN 10277-3: 2008 Bright steel products – technical delivery conditions – Part 3: Free-cutting steels 36

BS EN 10277-4: 2008 Bright steel products – technical delivery conditions – Part 4: Case hardening steels 36

BS EN 10277-5: 2008 Bright steel products – technical delivery conditions – Part 5: Steels for quenching and tempering

36

ISO 10333: 1983 [Draft] Personal fall-arrest systems and components - ISO/TC94/SC4 N50E 36

ISO 10333-1: 2000 Personal fall-arrest systems pt 1: Full body harnesses 36

ISO 10333-2: 2000 Personal fall-arrest systems pt 2: Lanyards and energy absorbers 36

ISO 10333-3: 2000 Personal fall-arrest systems pt 3: Self-retracting lifelines 36

ISO 10333-4: 2002 Personal fall-arrest systems pt 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester

36

ISO 10333-5: 2001 Personal fall-arrest systems pt 5: Connectors with self-closing and self-locking gates 36

ISO 10333-6: 2004 Personal fall-arrest systems pt 6: System performance tests 36

ISO 11660-2: 1994 Cranes - Access, guards and restraints - Part 2: Mobile cranes 36

ISO 11660-3: 2008 Cranes - Access, guards and restraints - Part 3: Tower cranes 36

BS EN ISO 12100: 2010 Safety of machinery - General principles for design - Risk assessment and risk reduction 36

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

prEN 12275: 1996 Mountaineering equipment – connectors – safety requirements and test methods 36 superseded

BS EN 12275:2013 Mountaineering equipment – connectors – safety requirements and test methods 36

prEN 12276: 1996 Mountaineering equipment – frictional anchors – safety requirements and test methods 36

prEN 12277: 1996 Mountaineering equipment – harnesses – safety requirements and test methods 36

prEN 12278: 1996 Mountaineering equipment – pulleys – safety requirements and test methods 36 superseded

BS EN 12278: 2007 Mountaineering equipment – pulleys – safety requirements and test methods 36

BS EN 12385-4: 2008 Steel wire ropes – safety – Stranded ropes for general lifting applications 36

BS EN 12810-1: 2003 Façade scaffolds made of prefabricated components pt1: product specifications 36

BS EN 12810-2: 2003 Façade scaffolds made of prefabricated components pt2: structural design 36

BS EN 12811-1: 2003 Temporary works equipment pt 1: Scaffolds – Performance requirements and general design 36

BS EN 12811-2: 2004 Temporary works equipment pt 2: Information on materials 36

BS EN 12811-3: 2002 Temporary works equipment pt 3: Load testing 36

BS EN 12841: 2006 Personal fall protection equipment – Rope access systems – adjustment devices 31

BS ISO 13232-3: 2005 Motorcycles – test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles – part 3: motorcyclist anthropometric impact dummy

36

BS EN 13374:2004 Temporary edge protection systems – Product specification, test methods 36

BS EN 13411-1: 2009 Terminations for steel wire ropes – safety – Part 1 Thimbles for steel wire rope slings 36A

BS EN 13411-2: 2008 Terminations for steel wire ropes – safety – Part 2 Splicing of eyes for wire rope slings 36A

BS EN 13411-3: 2008 Terminations for steel wire ropes – safety – Part 3 Ferrules and ferrule-securing 36A

BS EN 13411-4: 2011 Terminations for steel wire ropes – safety – Part 4 Metal and resin socketing 36A

BS EN 13411-5: 2008 Terminations for steel wire ropes – safety – Part 5 U-bolt wire rope grips 36A

BS EN 13411-8: 2011 Terminations for steel wire ropes – safety – Part 8 Swage terminals and swaging 36A

BS EN 13586: 2004+A1: 2008

Cranes - Access 36A

BS EN 13814:2004 Fairground and amusement park machinery and structures - safety 38 + corrigenda 2008 & 11

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

BS EN ISO 14122-1: 2001 Safety of Machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels

36A

BS EN ISO 14122-2: 2001 Safety of Machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways

36A

BS EN ISO 14122-3: 2001 Safety of Machinery - Permanent means of access to machinery - Part 3: Stairways, stepladders and guard-rails

36A

BS EN ISO 14122-4: 2001 Safety of Machinery - Permanent means of access to machinery - Part 4: Fixed ladders

36A

BS EN 14502-1 pt1: 2005 Cranes – equipment for lifting persons – pt1: suspended baskets 36A

ISO 14567: 1999 Personal protective equipment for protection against falls from a height - Single-point anchor devices

36A

BS EN ISO 15536-1: 2005 Ergonomics – computer manikins and body templates 36A BS EN ISO 15536-1: 2005

BS EN 15567-1: 2007 Sports and recreational facilities – rope courses – part 1: construction and safety requirements

36A

ISO 16024: 2005 Personal protective equipment for protection against falls from a height – Flexible horizontal lifeline systems

36A

PD CEN/TS 16415: 2013 Personal fall protection equipment - Anchor Devices - Recommendations for anchor devices for use by more than one person simultaneously

31

PD CEN/TS 16665: 2014 Standing ladder durability test specification 36A

List of Standards held – Section 31: British, European and International – continued

NUMBER, PART & YEAR TITLE SHELF-MARK

REMARKS

BS EN ISO 19011:2002 Guidelines for quality and/or environmental management systems auditing 36A

ISO 22159: 2007 Personal protective equipment for protection against falls – Descending devices 36A

BS ISO 22846-1: 2003 Personal equipment for protection against falls – rope access systems – part 1: Fundamental principles for a system of work

36A

ISO 22846-2: 2012 Personal equipment for protection against falls – rope access systems – part 2: Code of practice

36A

BS EN 30011-1 : 1993 Guide to: Quality systems auditing pt 1: Auditing 36A Superseded by BS EN ISO 19011:2002

BS EN 30011-2 : 1993 Guide to: Quality systems auditing pt 2: Qualification criteria for auditors 36A Superseded by BS EN ISO 19011:2002

BS EN 30011-3 : 1993 Guide to: Quality systems auditing pt 3: Managing an auditing programme 36A Superseded by BS EN ISO 19011:2002

BS EN 50308: 2004 Wind turbines - protective measures - requirements for design, operation and maintenance

36A

BS EN 60529: 1992 Degrees of protection provided by enclosures (IP code) 36A

List of Standards held – Section 32: Canadian

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

CSA-Z259.1: 1995 Safety belts and lanyards 55

CSA-Z259.2: M1979 Fall-arresting devices, personnel lowering devices and lifelines 55 Superseded by Z259.2.1: 1998 and Z259.2.2: 1998

CSA-Z259.2.1: 1998 Fall arresters, vertical lifelines and rails 55 Superseded by Z259.2.5-12

CSA-Z259.2.2: 1998 Self-retracting devices for personal fall-arrest systems 55 Supersedes relevant parts of Z259.2

CSA-Z259.2.3: 1999 [DRAFT] Descent control devices 55 Superseded

Z259.2.3-99 Descent control devices 55

CSA-Z259.3: M1978 Lineman’s body belt and lineman’s safety strap 55

CSA-Z259.10: M1990 Full body harnesses 55

CSA-Z259.11: M1992 Shock absorbers for personal fall-arrest systems 55

CSA-Z259.12: 1999 [DRAFT] Connecting components for personal fall-arrest systems 55

CSA-Z259.14: 1999 [DRAFT] Fall restrict equipment for wood pole climbing 55

CAN/CSA-Z259.?-99: 1999

[DRAFT] Flexible Horizontal Lifeline Systems Standard 55 superseded

CSA Z259.13-04 Flexible horizontal lifeline systems 55 superseded

CSA Z259.13-16 Manufactured horizontal lifeline systems 55

CSA Z259.2.5-12 Fall arresters and vertical lifelines 55 Reaffirmed 2016

CSA Z259.2.4-15 Fall-arresters and vertical rigid rails 55

List of Standards held – Section 33: Australian / New Zealand

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

AS/NZS 1891.1: 1995 Industrial fall-arrest systems and devices – part 1 – safety belts and harnesses 56

AS/NZS 1891.2: 1998 Industrial fall-arrest systems and devices – part 2 – horizontal lifeline and rail systems 56 Superseded by AS/NZS 1891.2: 2001

AS/NZS 1891.2: 2001 Industrial fall-arrest systems and devices – part 2 – horizontal lifeline and rail systems and supplement 1: prescribed configurations

56 Supersedes AS/NZS 1891.2: 1998

AS/NZS 1891.3: 1997 Industrial fall-arrest systems and devices – part 3 – fall-arrest devices 56

AS/NZS 1891.4: 1999 [DRAFT] Industrial fall-arrest systems and devices – part 4 – selection, use and maintenance

56

AS/NZS 4488.1:1997 Industrial rope access systems – part 1 - specifications 56

AS/NZS 4488.2:1997 Industrial rope access systems – part 2 - selection, use and maintenance 56

List of Standards held – Section 34: American

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

ANSI A10.14-1991 Requirements for safety belts, harnesses, lanyards and lifelines for construction and demolition use

57 Superseded by A10.32

ANSI A10.32-2004 Fall protection systems - American national standard for construction and demolition operations

57

AESC A14-1923 Safety code for the construction, care and use of ladders 57 Superseded

ASA A14-1935 Safety code for the construction, care and use of ladders 57 Superseded

USAS A14.3-1956 Safety code for fixed ladders 57 Superseded

ANSI A14.3-1992 Fixed ladders – safety requirements 57 Superseded

ANSI A14.3-2002 Fixed ladders – safety requirements 57 Supersedes 1992 edn

ANSI A14.3-2008 Fixed ladders – safety requirements 57 Supersedes 2002 edn

ANSI Z359.0-2007 Definitions and Nomenclature Used for Fall Protection and Fall Arrest 57

ANSI Z359.1-1992 Safety requirements for personal fall arrest systems, subsystems and components 57 Superseded by ANSI Z359.1-2007

ANSI Z359.1-2007 Safety requirements for personal fall arrest systems, subsystems and components 57

ANSI Z359.6-2009 Specifications and design requirements for active fall protections systems 57

ANSI Z359.7-2011 Qualification and verification testing of fall protection products 57

ANSI Z359.12-2009 Connecting components for personal fall-arrest systems 57

ANSI Z359.13-2009 Personal energy absorbers and energy absorbing lanyards 57 Superseded by 2013 edn

ANSI Z359.13-2013 Personal energy absorbers and energy absorbing lanyards 57

ANSI Z359.14-2014 Self-retracting devices for Personal fall-arrest and rescue systems 57

ANSI Z359.16-2016 Safety requirements for climbing ladder fall-arrest systems 57

ANSI Z359.17-20XX Flexible horizontal lifelines for personal fall protection systems (DRAFT) 57 DRAFT

ASTM A492-95: 2013 Standard Specification for Stainless Steel Rope Wire 57

ASTM A555/A555M-16 Standard Specification for Stainless Steel Wire and Rods 57

ASTM B117-1973 (Also ANSI Z118.1) Standard method of salt spray (fog) testing 57

NFPA 1983-2006 Standard on Life Safety Rope and Equipment for Emergency Services 57

List of Standards held – Section 35: pre-CEN European

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

NF R10-101: 1971 Anthropomorphic Mannequin for dynamic testing of automobiles 58

NF E 52-082: 1982 (in French and English) Tower cranes – general safety requirements 58

NF S 71-020: 1978 (in French and English) Personal equipment for protection against falls 58

NF E 85-010: 1988 (in French and English) Fixed metal ladders with or without safety cages – design, installation & test

58

NF E 85-012: 1991 (in French and English) Fixed metal ladders with or without safety cages – intruder-proof device barring access to the bottom of the ladder

58

DIN 7471: 1985 Safety equipment – lanyards – safety requirements and testing 58

DIN 7478: 1990 Industrial safety belts and harnesses – safety harnesses – safety requirements and testing 58

DIN 23326: 1982 Safety harness – safety anchorage devices – safety requirements and testing 58 Plus draft revision June 1990

DIN 32766: 1991 Protective equipment against fall – energy absorbers - safety requirements and testing 58

DIN 32769: 1986 Safety equipment – fall arrest devices – safety requirements and testing 58

DIN 32770: 1986 Protective equipment against fall – self-locking safety anchorages - safety requirements and testing

58

DIN 50017: 1982 Condensation water test atmospheres 58

DIN 53210: 1978 Designation of the degree of rusting of paint and similar coatings 58

List of Standards held – Section 36: German

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

DIN 471: 2011 Retaining rings for shafts – normal type and heavy type (circlips) 55

DIN 18799-2: 1999 Fixed ladders part 2: ladders with one stile – safety requirements and verification 55

DIN 18799-3: 1999 Fixed ladders part 3: ladders for chimneys – safety requirements 55

List of Standards held – Section 37: European Technical Approvals

NUMBER, PART & YEAR

TITLE SHELF-MARK

REMARKS

ETA-98/0002 Torque controlled expansion anchor made of stainless steel of sizes M8, M10, M12, M16, M20 and M24 for use in concrete

55

ETA-02/0022 Bonded achor (injection type) with anchor rod made of stainless steel of sizes M6, M8, M10, M12, M16, M20, M24 and M30 for use in non-cracked concrete

55