BRITISH STANDARDS BS 4592-2:2006 BS 5392:-shop.bsigroup.com/upload/Standards &...

BRITISH STANDARDS

BS 434:-

Bitumen road emulsions

BS 434-2:2006

Code of practice for the use of

cationic bitumen emulsions on

roads and other paved areas

supersedes BS 434-2:1984

ISBN 0 580 49879 4

£56.00 members, £112.00

non-membersB/510

BS 2000:-

Methods of test for petroleum and

its products

BS 2000-391:-

Determination of aromatic

hydrocarbon types in middle

distillates. High performance liquid

chromatography method with

refractive index detection

BS 4592:-

Industrial type flooring and stair

treads

BS 4592-0:2006

Common design requirements and

recommendations for installation

supersedes BS 4592 Parts 1-5

ISBN 0 580 48253 7

£49.00 members, £98.00

non-membersB/208/1

BS 4592-1:2006

Metal open bar gratings.

Specification


ISBN 0 580 48254 5

£34.00 members, £68.00

non-membersB/208/1

BS 4592-2:2006

Expanded metal gratings.

Specification


ISBN 0 580 48255 3

£34.00 members, £68.00

non-membersB/208/1

BS 4592-3:2006

Cold formed metal planks.

Specification


ISBN 0 580 48256 1

£34.00 members, £68.00

non-membersB/208/1

BS 4592-4:2006

Glass reinforced plastics (GRP)

open bar gratings. Specification


ISBN 0 580 48257 X

£34.00 members, £68.00

non-membersB/208/1

BS 4592-5:2006

Solid plates in metal and glass

reinforced plastics (GRP).

Specification


ISBN 0 580 48258 8

£34.00 members, £68.00

non-membersB/208/1

BS 5391:-

Acrylonitrile-butadiene-styrene

(ABS) pressure pipe

BS 5391-1:2006

Specification


ISBN 0 580 49182 X

£49.00 members, £98.00

non-membersPRI/88/2/P4

BS 5392:-

Acrylonitrile-butadiene-styrene

(ABS) fittings for use with ABS

pressure pipe

BS 5392-1:2006

Specification


ISBN 0 580 49183 8

£34.00 members, £68.00

non-membersPRI/88/2

BS 6068:-

Water quality

BS 6068-2.99:-

Physical, chemical and

biochemical methods.

Determination of selected

polybrominated diphenyl ethers in

sediment and sewage sludge.

Method using extraction and gas

chromatography/mass

spectrometry

BS 6068-5.45:-

Biological methods. Evaluation of

genotoxicity by measurement of

the induction of micronuclei. Mixed

population method using the cell

line V79

BS 6700:2006

Design, installation, testing and

maintenance of services supplying

water for domestic use within

buildings and their curtilages.

Specification

supersedes BS 6700:1997

ISBN 0 580 49786 0

£90.00 members, £180.00

non-membersB/504/2

of 71BRITISH STANDARDS

BS 7270:2006

Metallic materials. Constant

amplitude strain controlled axial

fatigue. Method of test


ISBN 0 580 49023 8

£49.00 members, £98.00

non-membersISE/NFE/4/6

BS 8468:-

Respiratory protective devices for

use against chemical, biological,

radiological and nuclear (CBRN)

agents

BS 8468-2:2006

Negative pressure, air purifying

devices with full face mask.

Specification

no current standard is superseded

ISBN 0 580 49762 3

£64.00 members, £128.00

non-membersPH/4

BS EN PUBLICATIONS

BS EN ISO 105:-

Textiles. Tests for colour fastness

BS EN ISO 105-C12:2006

Colour fastness to industrial

laundering


ISBN 0 580 49818 2

£34.00 members, £68.00

non-membersTCI/81

BS EN ISO 140:-

Acoustics. Measurement of sound

insulation in buildings and of

building elements

BS EN ISO 140-18:2006

Laboratory measurement of sound

generated by rainfall on building

elements


ISBN 0 580 49831 X

£49.00 members, £98.00

non-membersEH/1/6

BS EN 284:2006

Swap bodies. Non-stackable swap

bodies of class C. Dimensions and

general requirements

supersedes BS EN 284:1992

ISBN 978 058049902 9

£49.00 members, £98.00

non-membersTW/1

BS EN 415:-

Safety of packaging machines

BS EN 415-6:2006

Pallet wrapping machines


ISBN 978 058049933 3

£74.00 members, £148.00

non-membersMCE/3/3

BS EN 541:2006

Aluminium and aluminium alloys.

Rolled products for cans, closures

and lids. Specifications


ISBN 978 058049934 0

£49.00 members, £98.00

non-membersNFE/35

BS EN 545:2006

Ductile iron pipes, fittings,

accessories and their joints for

water pipelines. Requirements and

test methods


ISBN 0 580 49821 2

£74.00 members, £148.00

non-membersPSE/10

DD CEN/TS 1071:-

Advanced technical ceramics.

Methods of test for ceramic

coatings

DD CEN/TS 1071-11:2005

Determination of internal stress by

the Stoney formula


ISBN 978 058049935 7

£17.00 members, £34.00

non-membersRPI/13

BS EN ISO 1269:2006

Plastics. Homopolymer and

copolymer resins of vinyl chloride.

Determination of volatile matter

(including water)

supersedes BS 2782-4:Method

454D:1978ISBN 0 580 49816 6

£28.00 members, £56.00

non-membersPRI/82

BS EN 1297:2004

Flexible sheets for waterproofing.

Bitumen, plastic and rubber sheets

for roof waterproofing. Method of

artificial ageing by long term

exposure to the combination of UV

radiation, elevated temperature

and water


ISBN 0 580 49848 4

£28.00 members, £56.00

non-membersB/546/2

BS EN 1337:-

Structural bearings

BS EN 1337-2:2004

Sliding elements

supersedes BS EN 1337-2:2001 which

is withdrawn, partially supersedes BS

5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49849 2

£74.00 members, £148.00

non-membersB/522

of 71BS EN PUBLICATIONS

BS EN 1337-3:2005

Elastomeric bearings

partially supersedes BS

5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49850 6

£74.00 members, £148.00

non-membersB/522

BS EN 1337-5:2005

Pot bearings

partially supersedes BS

5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49851 4

£68.00 members, £136.00

non-membersB/522

BS EN 1337-7:2004

Spherical and cylindrical PTFE

bearings

supersedes BS EN 1337-7:2001 which

is withdrawn, partially supersedes BS

5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49852 2

£49.00 members, £98.00

non-membersB/522

BS EN 1731:2006

Personal eye protection. Mesh eye

and face protectors


ISBN 0 580 49882 4

£34.00 members, £68.00

non-membersPH/2/2

BS EN ISO 1805:2006

Fishing nets. Determination of

breaking force and knot breaking

force of netting yarns


ISBN 0 580 49883 2

£34.00 members, £68.00

non-membersTCI/77

BS EN 1881:2006

Products and systems for the

protection and repair of concrete

structures. Test methods. Testing

of anchoring products by the

pull-out method


ISBN 0 580 49827 1

£28.00 members, £56.00

non-membersB/517/8

BS EN 1926:2006

Natural stone test methods.

Determination of uniaxial

compressive strength


ISBN 978 058049936 4

£34.00 members, £68.00

non-membersB/545

BS EN 1936:2006


Determination of real density and

apparent density, and of total and

open porosity


ISBN 978 058049919 7

£28.00 members, £56.00

non-membersB/545

BS EN 1993:-

Eurocode 3. Design of steel

structures

BS EN 1993-1:-

General rules

BS EN 1993-1-3:2006

Supplementary rules for

cold-formed members and

sheeting

supersedes DD ENV 1993-1-3:2001

which is withdrawn and partially

supersedes BS 5950-5:1998, BS

5950-6:1995 and BS 5950-9:1994ISBN 0 580 49665 1

£90.00 members, £180.00

non-membersB/525/31

BS EN 1993-1-4:2006

Supplementary rules for stainless

steels


ISBN 0 580 49666 X

£56.00 members, £112.00

non-membersB/525/31

BS EN 1993-1-5:2006

Plated structural elements

partially supersedes BS 449-2:1969,

BS 5400-3:2000 and BS 5950-1:2000ISBN 0 580 49667 8

£68.00 members, £136.00

non-membersB/525/31

BS EN 1993-1-11:2006

Design of structures with tension

components


ISBN 0 580 49668 6

£56.00 members, £112.00

non-membersB/525/31

BS EN 2335:2005

Aerospace series. Bearings,

spherical plain in corrosion

resisting steel without assembly

slot. Dimensions and loads


ISBN 0 580 49854 9

£28.00 members, £56.00

non-membersACE/12

BS EN 3155:-

Aerospace series. Electrical

contacts used in elements of

connection

BS EN 3155-014:2006

Contacts, electrical, male, type A,

crimp, class S. Product standard


ISBN 978 058049937 1

£28.00 members, £56.00

non-membersACE/6/-/3


BS EN 3155-015:2006

Contacts, electrical, female, type A,

crimp, class S. Product standard


ISBN 978 058049938 8

£28.00 members, £56.00


BS EN 3155-030:2006

Contacts, electrical, coaxial,

shielded, size 12, male, type D,

crimp, class R. Product standard


ISBN 978 058049939 5

£28.00 members, £56.00


BS EN 3155-031:2006

Contacts, electrical, coaxial,

shielded, size 12, female, type D,

crimp, class R. Product standard


ISBN 978 058049940 1

£28.00 members, £56.00


BS EN 3155-035:2006

Contacts, electrical, triaxial, size

08, female, type D, crimp, class R.

Product standard


ISBN 978 058049941 8

£34.00 members, £68.00


BS EN 3155-059:2006

Contacts, electrical, coaxial, size

16, female, type D, solder, class R.

Product standard


ISBN 978 058049942 5

£34.00 members, £68.00


BS EN ISO 3166:-

Codes for the representation of

names of countries and their

subdivisions

BS EN ISO 3166-1:2006

Country codes

supersedes BS EN ISO 3166-1:1998

ISBN 0 580 49824 7

£74.00 members, £148.00

non-membersIDT/2/11

BS EN 3339:2006

Aerospace series. Aluminium alloy

AL-P7010-T76. Die forgings. a $3L

200 mm


ISBN 978 058049943 2

£64.00 members, £128.00


BS EN 3476:2006

Aerospace series. Steel

FE-PL1501 (30CrMo12). Air

melted. Softened. Forging stock. a

or D $3L 300 mm


ISBN 978 058049944 9

£28.00 members, £56.00


BS EN 3645:-

Aerospace series. Connectors,

electrical, circular, scoop-proof,

triple start threaded coupling,

operating temperature 175$0DC or

200$0DC continuous

BS EN 3645-003:2006

Receptacle square flange

mounting. Product standard


ISBN 978 058049947 0

£28.00 members, £56.00


BS EN 3645-004:2006

Receptacle, hermetic, square

flange mounting. Product standard


ISBN 0 580 49948 7

£28.00 members, £56.00


BS EN 3645-005:2006

Receptacle, hermetic, round

flange, brasage mounting. Product

standard


ISBN 978 058049949 4

£17.00 members, £34.00


BS EN 3645-006:2006

Protective cover for receptacle.

Product standard


ISBN 978 058049950 0

£28.00 members, £56.00


BS EN 3645-009:2006

Receptacle, round flange, jam nut

mounting. Product standard


ISBN 978 058049951 7

£28.00 members, £56.00


BS EN 3645-010:2006

Receptacle, hermetic, round

flange, jam nut mounting. Product

standard


ISBN 978 058049952 4

£28.00 members, £56.00



BS EN 3645-011:2006

Lanyard release plug with

grounding fingers. Type 1. Product

standard


ISBN 978 058049953 1

£28.00 members, £56.00


BS EN 3645-012:2006

Lanyard release plug with

grounding fingers. Type 2. Product

standard


ISBN 978 058049954 8

£28.00 members, £56.00


BS EN 3716:-

Aerospace series. Connector,

single-way with triaxial interface,

for transmission of digital data

BS EN 3716-005:2006

Crimp receptacle. Product

standard


ISBN 978 058049955 5

£28.00 members, £56.00


BS EN ISO 4618:2006

Paints and varnishes. Terms and

definitions

supersedes BS EN 971-1:1996, BS

EN ISO 4618-2:2000 and BS EN ISO

4618-3:2000ISBN 0 580 49555 8

£74.00 members, £148.00

non-membersSTI/11

BS EN ISO 5840:2005

Cardiovascular implants. Cardiac

valve prostheses

supersedes BS 6444-1:1990 and BS

EN 12006-1:1999ISBN 0 580 49872 7

£74.00 members, £148.00

non-membersCH/150/2

BS EN ISO 9333:2006

Dentistry. Brazing materials


ISBN 0 580 49735 6

£34.00 members, £68.00

non-membersCH/106/2

BS EN 10130:2006

Cold rolled low carbon steel flat

products for cold forming.

Technical delivery conditions


ISBN 0 580 49900 6

£34.00 members, £68.00

non-membersISE/10

BS EN 10300:2005

Steel tubes and fittings for onshore

and offshore pipelines. Bitumen hot

applied materials for external

coating


ISBN 0 580 49877 8

£68.00 members, £136.00

non-membersISE/16/-/11

BS EN 12012:-

Plastics and rubber machines. Size

reduction machines

BS EN 12012-4:2006

Safety requirements for

agglomerators


ISBN 0 580 49788 7

£34.00 members, £68.00

non-membersMCE/3/2

BS EN 12372:2006


Determination of flexural strength

under concentrated load


ISBN 978 058049920 3

£34.00 members, £68.00

non-membersB/545

BS EN 12588:2006

Lead and lead alloys. Rolled lead

sheet for building purposes


ISBN 978 058049960 9

£34.00 members, £68.00

non-membersNFE/22

BS EN 12788:2005


Mechanical properties of ceramic

composites at high temperature

under inert atmosphere.


supersedes DD ENV 12788:1998

ISBN 0 580 49862 X

£34.00 members, £68.00

non-membersRPI/13

BS EN 12916:2006

(BS 2000-391:2006)

Petroleum products. Determination

of aromatic hydrocarbon types in

middle distillates. High

performance liquid

chromatography method with

refractive index detection


ISBN 0 580 49803 4

£17.48 members, £23.30

non-membersPTI/13

BS EN 13234:2006



composites at ambient

temperature. Evaluation of the

resistance to crack propagation by

notch sensitivity testing


ISBN 0 580 49864 6

£34.00 members, £68.00

non-membersRPI/13


BS EN 13235:2006



composites at high temperature

under inert atmosphere.

Determination of creep behaviour


ISBN 0 580 49863 8

£34.00 members, £68.00

non-membersRPI/13

BS EN 13307:-

Timber blanks and semi-finished

profiles for non-structural uses

BS EN 13307-1:2006

Requirements


ISBN 0 580 49753 4

£34.00 members, £68.00

non-membersB/543

BS EN ISO 13705:2006

Petroleum, petrochemical and

natural gas industries. Fired

heaters for general refinery service

supersedes BS EN ISO 13705:2002

ISBN 0 580 49790 9

£106.00 members, £212.00

non-membersPSE/17/-/6

BS EN 13803:-

Railway applications. Track. Track

alignment design parameters.

Track gauges 1435 mm and wider

BS EN 13803-2:2006

Switches and crossings and

comparable alignment design

situations with abrupt changes of

curvature


ISBN 978 058049961 6

£64.00 members, £128.00

non-membersRAE/2/-/3

BS EN 13981:-


Products for structural railway

applications. Technical conditions

for inspection and delivery

BS EN 13981-4:2006

Forgings


ISBN 0 580 49832 8

£49.00 members, £98.00

non-membersNFE/35

BS EN 14220:2006

Timber and wood-based materials

in external windows, external door

leaves and external doorframes.

Requirements and specifications


ISBN 0 580 49754 2

£49.00 members, £98.00

non-membersB/543

BS EN 14221:2006

Timber and wood-based materials

in internal windows, internal door

leaves and internal doorframes.

Requirements and specifications


ISBN 0 580 49755 0

£49.00 members, £98.00

non-membersB/543

BS EN 14255:-

Measurement and assessment of

personal exposures to incoherent

optical radiation

BS EN 14255-4:2006

Terminology and quantities used in

UV-, visible and IR-exposure

measurements


ISBN 0 580 49676 7

£34.00 members, £68.00

non-membersCPL/34/10

BS EN 14358:2006

Timber structures. Calculation of

characteristic 5-percentile values

and acceptance criteria for a

sample


ISBN 978 058049962 3

£28.00 members, £56.00

non-membersB/518

BS EN 14439:2006

Cranes. Safety. Tower cranes


ISBN 978 058049963 0

£64.00 members, £128.00

non-membersMHE/3/5

BS EN 14452:2005

Devices to prevent pollution by

backflow of potable water. Pipe

interrupter with atmospheric vent

and moving element DN 10 to DN

20. Family D, type B


ISBN 0 580 49769 0

£34.00 members, £68.00

non-membersB/505/4

BS EN 14512:2006

Tanks for the transport of

dangerous goods. Tank equipment

for the transport of liquid

chemicals. Hinged manhole cover

and neckrings with pivoting bolts


ISBN 0 580 49880 8

£28.00 members, £56.00

non-membersAUE/18

BS EN 14620:-

Design and manufacture of site

built, vertical, cylindrical,

flat-bottomed steel tanks for the

storage of refrigerated, liquefied

gases with operating temperatures

between 0$0DC and -165$0DC


BS EN 14620-1:2006

General


ISBN 0 580 49775 5

£56.00 members, £112.00

non-membersPVE/15

BS EN 14620-2:2006

Metallic components


ISBN 0 580 49776 3

£68.00 members, £136.00

non-membersPVE/15

BS EN 14620-3:2006

Concrete components


ISBN 0 580 49777 1

£49.00 members, £98.00

non-membersPVE/15

BS EN 14620-4:2006

Insulation components


ISBN 0 580 49778 X

£56.00 members, £112.00

non-membersPVE/15

BS EN 14620-5:2006

Testing, drying, purging and

cool-down


ISBN 0 580 49779 8

£34.00 members, £68.00

non-membersPVE/15

BS EN 14673:2006

Safety of machinery. Safety

requirements for hydraulically

powered open die hot forging

presses for the forging of steel and

non-ferrous metals


ISBN 0 580 49756 9

£64.00 members, £128.00

non-membersMCE/23

BS EN 14704:-

Determination of the elasticity of

fabrics

BS EN 14704-3:2006

Narrow fabrics


ISBN 978 058049964 7

£34.00 members, £68.00

non-membersTCI/24

BS EN 14879:-

Organic coating systems and

linings for protection of industrial

apparatus and plants against

corrosion caused by aggressive

media

BS EN 14879-2:2006

Coatings on metallic components


ISBN 978 058049918 0

£68.00 members, £136.00

non-membersISE/16

BS EN 14879-3:2006

Coatings on concrete components


ISBN 978 058049917 3

£68.00 members, £136.00

non-membersISE/16

BS EN ISO 14880:-

Optics and photonics. Microlens

arrays

BS EN ISO 14880-2:2006

Test methods for wavefront

aberrations


ISBN 978 058049965 4

£56.00 members, £112.00

non-membersCPW/172

BS EN 14885:2006

Chemical disinfectants and

antiseptics. Application of

European standards for chemical

disinfectants and antiseptics


ISBN 0 580 49757 7

£56.00 members, £112.00

non-membersCH/216

BS EN 14932:2006

Plastics. Stretch thermoplastic

films for wrapping bales.

Requirements and test methods


ISBN 978 058049966 1

£56.00 members, £112.00

non-membersPRI/75

BS EN 14982:2006

Plastics piping systems.

Thermoplastics shafts or risers for

inspection chambers and

manholes. Determination of ring

stiffness


ISBN 0 580 49721 6

£34.00 members, £68.00


BS EN 14984:2006

Liming materials. Determination of

product effect on soil pH. Soil

incubation method


ISBN 0 580 49825 5

£49.00 members, £98.00

non-membersCII/37

BS EN 14987:2006

Plastics. Evaluation of disposability

in waste water treatment plants.

Test scheme for final acceptance

and specifications


ISBN 0 580 49792 5

£28.00 members, £56.00

non-membersPRI/21


DD CEN/TS 14997:2006

Characterization of waste.

Leaching behaviour tests.

Influence of pH on leaching with

continuous pH-control


ISBN 0 580 49885 9

£28.00 members, £56.00

non-membersB/508/3

DD CEN/TS 15022:-

Copper and copper alloys.

Determination of tin content

DD CEN/TS 15022-4:2006

Medium tin content. Flame atomic

absorption spectrometry method

(FAAS)


ISBN 978 058049914 2

£13.00 members, £26.00

non-membersNFE/34

DD CEN/TS 15023:-


Determination of nickel content

DD CEN/TS 15023-3:2006

Flame atomic absorption

spectrometry method (FAAS)


ISBN 978 058049912 8

£17.00 members, £34.00

non-membersNFE/34

DD CEN/TS 15025:2006


Determination of magnesium

content. Flame atomic absorption



ISBN 978 058049913 5

£17.00 members, £34.00

non-membersNFE/34

BS EN 15035:2006

Heating boilers. Special

requirements for oil fired room

sealed units up to 70 kW


ISBN 978 058049906 7

£56.00 members, £112.00

non-membersRHE/10

DD CEN/TS 15084:2006

Liming materials. Guide to the

determination of the lime

requirement


ISBN 0 580 49802 6

£17.00 members, £34.00

non-membersCII/37

BS EN 15109:2006

Surface active agents.

Determination of the active matter

content of

alkylamidopropylbetaines


ISBN 0 580 49886 7

£34.00 members, £68.00

non-membersCII/34

BS EN 15146:2006

Solid softwood panelling and

cladding. Machined profiles without

tongue and groove


ISBN 978 058049967 8

£34.00 members, £68.00

non-membersB/543

BS EN 15202:2006

LPG equipment and accessories.

Essential operational dimensions

for LPG cylinder valve outlet and

associated equipment connections


ISBN 978 058049916 6

£64.00 members, £128.00

non-membersPVE/19

BS EN 15205:2006

Determination of hexavalent

chromium in corrosion protection

layers. Qualitative analysis


ISBN 0 580 49888 3

£28.00 members, £56.00

non-membersSTI/33

BS EN 15207:2006

Tanks for transport of dangerous

goods. Plug/socket connection and

supply characteristics for service

equipment in hazardous areas with

24 V nominal supply voltage


ISBN 978 058049968 5

£34.00 members, £68.00

non-membersAUE/18

DD CEN/TS 15211:2006

Health informatics. Mapping of

hierarchical message descriptions

to XML


ISBN 0 580 49732 1

£56.00 members, £112.00

non-membersIST/35

DD CEN/TS 15231:2006

Open data communication in

building automation, controls and

building management. Mapping

between Lonworks and BACnet


ISBN 0 580 49889 1

£34.00 members, £68.00

non-membersRHE/16

BS EN 15238:2006

Soil improvers and growing media.

Determination of quantity for

materials with particle size greater

than 60 mm


ISBN 978 058049921 0

£34.00 members, £68.00

non-membersAW/20


DD CEN/TS 15451:2006

Fertilizers. Determination of

chelating agents. Determination of

iron chelated by EDDHSA by ion

pair chromatography


ISBN 0 580 49830 1

£17.00 members, £34.00

non-membersCII/37

DD CEN/TS 15452:2006


chelating agents. Determination of

iron chelated by o,p-EDDHA by

reversed phase HPLC


ISBN 0 580 49829 8

£17.00 members, £34.00

non-membersCII/37

DD CEN/TS 15475:2006


ammoniacal nitrogen


ISBN 0 580 49801 8

£17.00 members, £34.00

non-membersCII/37

DD CEN/TS 15476:2006

Fertilizers. Determination of nitric

and ammoniacal nitrogen

according to Devarda


ISBN 0 580 49800 X

£17.00 members, £34.00

non-membersCII/37

DD CEN/TS 15477:2006

Fertilizers. Determination of the

water-soluble potassium content


ISBN 0 580 49799 2

£13.00 members, £26.00

non-membersCII/37

DD CEN/TS 15478:2006

Fertilizers. Determination of total

nitrogen in urea


ISBN 0 580 49798 4

£17.00 members, £34.00

non-membersCII/37

DD CEN/TS 15479:2006

Fertilizers. Spectrophotometric

determination of biuret in urea


ISBN 0 580 49797 6

£13.00 members, £26.00

non-membersCII/37

BS EN ISO 15535:2006

General requirements for

establishing anthropometric

databases

supersedes BS EN ISO 15535:2003

ISBN 978 058049969 2

£49.00 members, £98.00

non-membersPH/9/4

BS EN ISO 17201:-

Acoustics. Noise from shooting

ranges

BS EN ISO 17201-2:2006

Estimation of muzzle blast and

projectile sound by calculation


ISBN 0 580 49766 6

£56.00 members, £112.00

non-membersEH/1/3

BS EN ISO 18453:2005

Natural gas. Correlation between

water content and water dew point


ISBN 0 580 49782 8

£56.00 members, £112.00

non-membersPTI/15

BS EN ISO 18753:2005

Fine ceramics (advanced

ceramics, advanced technical

ceramics). Determination of

absolute density of ceramic

powders by pyknometer

supersedes BS EN 725-7:1996

ISBN 0 580 49892 1

£34.00 members, £68.00

non-membersRPI/13

BS EN ISO 18756:2005




fracture toughness of monolithic

ceramics at room temperature by

the surface crack in flexure (SCF)

method


ISBN 0 580 49897 2

£56.00 members, £112.00

non-membersRPI/13

BS EN ISO 18757:2005




specific surface area of ceramic

powders by gas adsorption using

the BET method


ISBN 0 580 49891 3

£34.00 members, £68.00

non-membersRPI/13

BS EN ISO 20776:-

Clinical laboratory testing and in

vitro diagnostic test systems.

Susceptibility testing of infectious

agents and evaluation of

performance of antimicrobial

susceptibility test devices


BS EN ISO 20776-1:2006

Reference method for testing the in

vitro activity of antimicrobial agents

against rapidly growing aerobic

bacteria involved in infectious

diseases


ISBN 0 580 49791 7

£49.00 members, £98.00

non-membersCH/212

BS EN ISO 21178:2006

Light conveyor belts. Determination

of electrical resistances


ISBN 0 580 49809 3

£49.00 members, £98.00

non-membersPRI/67

BS EN ISO 21179:2006


of the electrostatic field generated

by a running light conveyor belt


ISBN 0 580 49804 2

£28.00 members, £56.00

non-membersPRI/67

BS EN ISO 21180:2006


of the maximum tensile strength


ISBN 0 580 49805 0

£34.00 members, £68.00

non-membersPRI/67

BS EN ISO 21181:2006


of the relaxed elastic modulus


ISBN 0 580 49806 9

£34.00 members, £68.00

non-membersPRI/67

BS EN ISO 21182:2006


of the coefficient of friction


ISBN 0 580 49807 7

£34.00 members, £68.00

non-membersPRI/67

BS EN ISO 21183:-

Light conveyor belts

BS EN ISO 21183-1:2006

Principal characteristics and

applications


ISBN 0 580 49808 5

£28.00 members, £56.00

non-membersPRI/67

BS EN ISO 21549:-

Health informatics. Patient

healthcard data

BS EN ISO 21549-4:2006

Extended clinical data


ISBN 0 580 49789 5

£49.00 members, £98.00

non-membersIST/35

BS EN ISO 22675:2006

Prosthetics. Testing of ankle-foot

devices and foot units.



ISBN 0 580 48654 0

£78.00 members, £156.00

non-membersCH/168

BS EN ISO 24013:2006

Optics and photonics. Lasers and

laser-related equipment.

Measurement of phase retardation

of optical components for polarized

laser radiation


ISBN 0 580 49898 0

£49.00 members, £98.00

non-membersCPW/172

BS EN 50116:2006

Information technology equipment.

Routine electrical safety testing in

production

supersedes BS EN 50116:1996 which

remains currentISBN 0 580 49860 3

£28.00 members, £56.00

non-membersEPL/108

BS EN 50470:-

Electricity metering equipment

(A.C.)

BS EN 50470-1:2006

General requirements, tests and

test conditions. Metering

equipment (class indexes A, B and

C)


ISBN 0 580 49810 7

£68.00 members, £136.00

non-membersPEL/13

BS EN 50470-2:2006

Particular requirements.

Electromechanical meters for

active energy (class indexes A and

B)


ISBN 0 580 49811 5

£49.00 members, £98.00

non-membersPEL/13


BS EN 50470-3:2006

Particular requirements. Static

meters for active energy (class

indexes A, B and C)


ISBN 0 580 49812 3

£56.00 members, £112.00

non-membersPEL/13

BS EN 55015:2006

Limits and methods of

measurement of radio disturbance

characteristics of electrical lighting

and similar equipment

supersedes BS EN 55015:2001 which

remains currentISBN 978 058050001 5

£64.00 members, £128.00

non-membersGEL/210/11

BS EN 55016:-

Specification for radio disturbance

and immunity measuring apparatus

and methods

BS EN 55016-1-3:2006

Radio disturbance and immunity

measuring apparatus. Ancillary

equipment. Disturbance power

supersedes BS EN 55016-1-3:2004

which remains currentISBN 978 058050002 2

£56.00 members, £112.00


BS EN 60216:-

Electrical insulating materials.

Thermal endurance properties

BS EN 60216-6:2006

Determination of thermal

endurance indices (TI and RTE) of

an insulating material using the

fixed time frame method


ISBN 0 580 49815 8

£68.00 members, £136.00

non-membersGEL/112

BS EN 60745:-

Hand-held motor-operated electric

tools. Safety

BS EN 60745-1:2006

General requirements


which remains currentISBN 0 580 49842 5

£96.00 members, £192.00

non-membersCPL/61/6

BS EN 60745-2-15:2006

Particular requirements for hedge

trimmers



£49.00 members, £98.00

non-membersCPL/61/6

BS EN 60749:-

Semiconductor devices.

Mechanical and climatic test

methods

BS EN 60749-35:2006

Acoustic microscopy for plastic

encapsulated electronic

components


ISBN 0 580 49739 9

£49.00 members, £98.00

non-membersEPL/47

BS EN 60749-39:2006

Measurement of moisture

diffusivity and water solubility in

organic materials used for

semiconductor components

partially supersedes BS EN

60749:1999ISBN 0 580 49866 2

£28.00 members, £56.00

non-membersEPL/47

BS EN 60870:-

Telecontrol equipment and

systems

BS EN 60870-5-104:2006

Transmission protocols. Network

access for IEC 60870-5-101 using

standard transport profiles


ISBN 0 580 49781 X

£74.00 members, £148.00

non-membersPEL/57

BS EN 60904:-

Photovoltaic devices

BS EN 60904-1:2006

Measurement of photovoltaic

current-voltage characteristics


ISBN 0 580 49894 8

£34.00 members, £68.00

non-membersGEL/82

BS EN 60958:-

Digital audio interface

BS EN 60958-3:2006

Consumer applications



£68.00 members, £136.00

non-membersEPL/100

BS EN 61000:-

Electromagnetic compatibility

(EMC)

BS EN 61000-4-5:2006

Testing and measurement

techniques. Surge immunity test



£68.00 members, £136.00



BS EN 61204:-

Low voltage power supplies, D.C.

Output

BS EN 61204-7:2006

Safety requirements


ISBN 0 580 49893 X

£96.00 members, £192.00

non-membersPEL/22

BS EN 61747:-

Liquid crystal display devices

BS EN 61747-3:2006

Liquid crystal display (LCD) cells.

Sectional specification


ISBN 0 580 49819 0

£34.00 members, £68.00

non-membersEPL/47

BS EN 61937:-

Digital audio. Interface for

non-linear PCM encoded audio

bitstreams applying IEC 60958

BS EN 61937-5:2006

Non-linear PCM bitstreams

according to the DTS (digital

theatre systems) format(s)


which remains currentISBN 978 058049903 6

£34.00 members, £68.00

non-membersEPL/100

BS EN 62002:-

Mobile and portable DVB-T/H radio

access

BS EN 62002-1:2006

Interface specification


ISBN 0 580 49813 1

£68.00 members, £136.00

non-membersEPL/100

BS EN 62002-2:2006

Interface conformance testing


ISBN 0 580 49814 X

£56.00 members, £112.00

non-membersEPL/100

BS EN 62047:-

Semiconductor devices.

Micro-electromechanical devices

BS EN 62047-2:2006

Tensile testing method of thin film

materials


ISBN 0 580 49740 2

£34.00 members, £68.00

non-membersEPL/47

BS EN 62076:2006

Industrial electroheating

installations. Test methods for

induction channel and induction

crucible furnaces

supersedes BS 7690:1993 and BS EN

60646:1999ISBN 0 580 48991 4

£34.00 members, £68.00

non-membersPEL/27

BS EN 62271:-

High-voltage switchgear and

controlgear

BS EN 62271-3:2006

Digital interfaces based on IEC

61850


ISBN 0 580 49820 4

£68.00 members, £136.00

non-membersPEL/17/1

BS EN 62317:-

Ferrite cores. Dimensions

BS EN 62317-8:2006

E-cores

partially supersedes BS EN

62358:2004ISBN 978 058049915 9

£34.00 members, £68.00

non-membersEPL/51

BS EN 62384:2006

D.C. or A.C. supplied electronic

control gear for LED modules.

Performance requirements


ISBN 0 580 49678 3

£34.00 members, £68.00

non-membersCPL/34/3

BS ENs IMPLEMENTED BY

AMENDMENTBS EN ISO 13628:-

Petroleum and natural gas

industries. Design and operation of

subsea production systems

BS EN ISO 13628-10:2006

Specification for bonded flexible

pipe

BS EN ISO 13679:2006


industries. Procedures for testing

casing and tubing connections

BS EN ISO 16712:2006

Water quality. Determination of

acute toxicity of marine or

estuarine sediment to amphipods

BS EN ISO 17294:-

Water quality. Application of

inductively coupled plasma mass

spectrometry (ICP-MS)

of 71BS ENs IMPLEMENTED BY AMENDMENT

BS EN ISO 17294-1:2006

General guidelines

BS EN ISO 19739:2005

Natural gas. Determination of

sulfur compounds using gas

chromatography

BS IMPLEMENTATIONS

BS ISO 368:2006

Spinning preparatory, spinning and

doubling (twisting) machinery.

Tubes for ring-spinning, doubling

and twisting spindles, taper 1:38

and 1:64

supersedes BS ISO 368:1991

ISBN 0 580 49839 5

£28.00 members, £56.00

non-membersTCI/33

BS ISO 871:2006

Plastics. Determination of ignition

temperature using a hot-air furnace


ISBN 0 580 49847 6

£28.00 members, £56.00

non-membersPRI/26

BS ISO 4306:-

Cranes. Vocabulary

BS ISO 4306-5:2005

Bridge and gantry cranes


ISBN 0 580 49899 9

£34.00 members, £68.00

non-membersMHE/3/3

BS ISO 4831:2006

Microbiology of food and animal

feeding stuffs. Horizontal method

for the detection and enumeration

of coliforms. Most probable number

technique


ISBN 0 580 48505 6

£34.00 members, £68.00

non-membersAW/9

DD ISO/TS 4869:-

Acoustics. Hearing protectors

DD ISO/TS 4869-5:2006

Method for estimation of noise

reduction using fitting by

inexperienced test subjects


ISBN 0 580 49881 6

£28.00 members, £56.00

non-membersEH/1/1

BS ISO 5700:2006

Wheeled tractors for agriculture

and forestry. Roll-over protective

structures (ROPS). Static test

method and acceptance conditions


ISBN 978 058049957 9

£56.00 members, £112.00

non-membersAGE/6

BS ISO 6743:-

Lubricants, industrial oils and

related products (class L).

Classification

BS ISO 6743-5:2006

Family T (turbines)


ISBN 0 580 49878 6

£28.00 members, £56.00

non-membersPTI/7

BS ISO 6886:2006

Animal and vegetable fats and oils.

Determination of oxidative stability

(accelerated oxidation test)

supersedes BS 684-2.25:1997

ISBN 0 580 49768 2

£34.00 members, £68.00

non-membersAW/307

BS ISO/IEC 7816:-

Identification cards. Integrated

circuit cards

BS ISO/IEC 7816-3:2006

Cards with contacts. Electrical

interface and transmission

protocols


ISBN 0 580 49823 9

£68.00 members, £136.00

non-membersIST/17

BS ISO 8068:2006


related products (class L). Family T

(turbines). Specification for

lubricating oils for turbines


ISBN 0 580 49884 0

£49.00 members, £98.00

non-membersPTI/7

BS ISO 8422:2006

Sequential sampling plans for

inspection by attributes


ISBN 978 058049584 1

£56.00 members, £112.00

non-membersSS/5

BS ISO 9911:2006

Agricultural irrigation equipment.

Manually operated small plastics

valves


ISBN 0 580 49770 4

£34.00 members, £68.00

non-membersAGE/30

of 71BS IMPLEMENTATIONS

BS ISO/IEC 9973:2006

Information technology. Computer

graphics, image processing and

environmental data representation.

Procedures for registration of items

supersedes BS ISO/IEC 9973:1994

ISBN 0 580 49845 X

£56.00 members, £112.00

non-membersIST/31

BS ISO 11076:2006

Aircraft. Ground-based

de-icing/anti-icing methods with

fluids


ISBN 0 580 49003 3

£56.00 members, £112.00

non-membersACE/57

BS ISO 11534:2006

Iron ores. Determination of tin.


spectrometric method


ISBN 978 058049905 0

£34.00 members, £68.00

non-membersISE/58

BS ISO 11629:2004

Cranes. Measurement of the mass

of a crane and its components


ISBN 0 580 49895 6

£28.00 members, £56.00

non-membersMHE/3

BS ISO 12082:2006

Processed cheese and processed

cheese products. Calculation of the

content of added citrate

emulsifying agents and

acidifiers/pH-controlling agents,

expressed as citric acid


ISBN 0 580 49865 4

£28.00 members, £56.00

non-membersAW/5

BS ISO 13300:-

Sensory analysis. General

guidance for the staff of a sensory

evaluation laboratory

BS ISO 13300-1:2006

Staff responsibilities


ISBN 0 580 49873 5

£34.00 members, £68.00

non-membersAW/12

BS ISO 13300-2:2006

Recruitment and training of panel

leaders


ISBN 0 580 49874 3

£34.00 members, £68.00

non-membersAW/12

BS ISO 13674:-

Road vehicles. Test method for the

quantification of on-centre handling

BS ISO 13674-2:2006

Transition test


ISBN 978 058049911 1

£34.00 members, £68.00

non-membersAUE/15

DD ISO/TS 13899:-

Steel. Determination of Mo, Nb and

W contents in alloyed steel.

Inductively coupled plasma atomic

emission spectrometric method

DD ISO/TS 13899-3:2005

Determination of W content


ISBN 0 580 49855 7

£17.00 members, £34.00

non-membersISE/18

BS ISO 14572:2006

Road vehicles. Round, screened

and unscreened, 60 V and 600 V

multi-core sheathed cables. Test

methods and requirements for

basic and high-performance cables


ISBN 0 580 49727 5

£49.00 members, £98.00

non-membersAUE/16

BS ISO/IEC 14888:-

Information technology. Security

techniques. Digital signatures with

appendix

BS ISO/IEC 14888-3:2006

Discrete logarithm based

mechanisms

supersedes BS ISO/IEC 14888-3:1998

ISBN 0 580 49846 8

£74.00 members, £148.00

non-membersIST/33

BS ISO 15003:2006

Agricultural engineering. Electrical

and electronic equipment. Testing

resistance to environmental

conditions


ISBN 0 580 49817 4

£49.00 members, £98.00

non-membersAGE/6

BS ISO/IEC 15434:2006

Information technology. Automatic

identification and data capture

techniques. Syntax for

high-capacity ADC media


ISBN 0 580 49857 3

£49.00 members, £98.00

non-membersIST/34


BS ISO 15553:2006

Water quality. Isolation and

identification of Cryptosporidium

oocysts and Giardia cysts from

water


ISBN 0 580 49843 3

£64.00 members, £128.00

non-membersEH/3/4

BS ISO/IEC 16085:2006

Systems and software engineering.

Life cycle processes. Risk

management


ISBN 978 058049977 7

£56.00 members, £112.00

non-membersIST/15

BS ISO 17087:2006

Specifications for adhesives used

for finger joints in non-structural

lumber products


ISBN 0 580 49844 1

£49.00 members, £98.00

non-membersPRI/52

BS ISO 17321:-

Graphic technology and

photography. Colour

characterization of digital still

cameras (DSCs)

BS ISO 17321-1:2006

Stimuli, metrology, and test

procedures


ISBN 978 058049907 4

£56.00 members, £112.00

non-membersCPW/42

BS ISO 17499:2006

Carbonaceous materials used in

the production of aluminium.

Determination of baking level

expressed by equivalent

temperature


ISBN 0 580 49840 9

£28.00 members, £56.00

non-membersCII/24

DD ISO/TS 17996:2006

Cheese. Determination of

rheological properties by uniaxial

compression at constant

displacement rate


ISBN 0 580 49828 X

£28.00 members, £56.00

non-membersAW/5

BS ISO 18898:2006

Rubber. Calibration and verification

of hardness testers


ISBN 0 580 49765 8

£49.00 members, £98.00

non-membersPRI/20

DD ISO/TS 19138:2006

Geographic information. Data

quality measures


ISBN 0 580 49896 4

£64.00 members, £128.00

non-membersIST/36

BS ISO 19903:2006


industries. Fixed concrete offshore

structures


ISBN 978 058049909 8

£84.00 members, £168.00

non-membersB/525/12

BS ISO 19904:-


industries. Floating offshore

structures

BS ISO 19904-1:2006

Monohulls, semi-submersibles and

spars


ISBN 0 580 49856 5

£96.00 members, £192.00

non-membersB/525/12

BS ISO 20302:2006

Health informatics. Health cards.

Numbering system and registration

procedure for issuer identifiers


ISBN 978 058049910 4

£28.00 members, £56.00

non-membersIST/35

BS ISO 21308:-

Road vehicles. Product data

exchange between chassis and

bodywork manufacturers (BEP)

BS ISO 21308-2:2006

Dimensional bodywork exchange

parameters


ISBN 0 580 49774 7

£74.00 members, £148.00

non-membersAUE/9

BS ISO 21427:-

Water quality. Evaluation of

genotoxicity by measurement of

the induction of micronuclei

BS ISO 21427-2:2006

(BS 6068-5.45:2006)

Mixed population method using the

cell line V79


ISBN 0 580 49771 2

£49.00 members, £98.00

non-membersEH/3/5


BS ISO 21485:2006

Textile machinery. Draw frame for

cotton spinning. Vocabulary and

principles of construction


ISBN 0 580 49838 7

£34.00 members, £68.00

non-membersTCI/33

BS ISO 21543:2006

Milk products. Guidelines for the

application of near infrared

spectrometry


ISBN 0 580 49764 X

£56.00 members, £112.00

non-membersAW/5

BS ISO 21988:2006

Abrasion-resistant cast irons.

Classification


ISBN 978 058049901 2

£49.00 members, £98.00

non-membersISE/35

BS ISO 22032:2006

(BS 6068-2.99:2006)


selected polybrominated diphenyl

ethers in sediment and sewage

sludge. Method using extraction

and gas chromatography/mass

spectrometry


ISBN 978 058049971 5

£56.00 members, £112.00

non-membersEH/3/2

BS ISO 22779:2006

Metallic coatings. Physical

vapour-deposited coatings of

aluminium. Specification and test

methods


ISBN 0 580 49822 0

£49.00 members, £98.00

non-membersSTI/33

BS ISO 22896:2006

Road vehicles. Deployment and

sensor bus for occupant safety

systems


ISBN 0 580 49772 0

£68.00 members, £136.00

non-membersAUE/16

BS ISO 23058:2006

Milk and milk products. Ovine and

caprine rennets. Determination of

total milk-clotting activity


ISBN 0 580 49763 1

£34.00 members, £68.00

non-membersAW/5

BS ISO 23273:-

Fuel cell road vehicles. Safety

specifications

BS ISO 23273-3:2006

Protection of persons against

electric shock


ISBN 0 580 49773 9

£34.00 members, £68.00

non-membersPEL/69

BS ISO 23833:2006

Microbeam analysis. Electron

probe microanalysis (EPMA).

Vocabulary


ISBN 978 058049972 2

£68.00 members, £136.00

non-membersCII/9

BS ISO 24342:2006

Resilient floor-covering tiles.

Determination of side length, edge

straightness and squareness


ISBN 0 580 49793 3

£34.00 members, £68.00

non-membersPRI/60

BS ISO/IEC 24730:-

Information technology. Real-time

locating systems (RTLS)

BS ISO/IEC 24730-2:2006

2,4 GHz air interface protocol


ISBN 978 058049975 3

£56.00 members, £112.00

non-membersIST/34

DD ISO/TS 24817:2006


natural gas industries. Composite

repairs for pipework. Qualification

and design, installation, testing and

inspection


ISBN 978 058049976 0

£64.00 members, £128.00

non-membersPSE/17/-/6

DD ISO/TS 26844:2006

Milk and milk products.

Determination of antimicrobial

residues. Tube diffusion test


ISBN 0 580 49853 0

£17.00 members, £34.00

non-membersAW/5

DD ISO/PAS 28003:2006

Security management systems for

the supply chain. Requirements for

bodies providing audit and

certification of supply chain

security management systems


ISBN 0 580 49876 X

£56.00 members, £112.00

non-membersSME/32


BS IEC 62275:2006

Cable management systems.

Cable ties for electrical installations


ISBN 0 580 49682 1

£49.00 members, £98.00

non-membersPEL/213

PUBLISHED DOCUMENTS

PD 6689:2006

Surface dressing. Guidance on the

use of BS EN 12271


ISBN 0 580 48851 9

£34.00 members, £68.00

non-membersB/510/2

PD CEN/TR 15310:-


Sampling of waste materials

PD CEN/TR 15310-1:2006

Guidance on selection and

application of criteria for sampling

under various conditions


ISBN 0 580 49833 6

£74.00 members, £148.00

non-membersB/508/3

PD CEN/TR 15310-2:2006

Guidance on sampling techniques


ISBN 0 580 49834 4

£68.00 members, £136.00

non-membersB/508/3

PD CEN/TR 15310-3:2006

Guidance on procedures for

sub-sampling in the field


ISBN 0 580 49835 2

£49.00 members, £98.00

non-membersB/508/3

PD CEN/TR 15310-4:2006

Guidance on procedures for

sample packaging, storage,

preservation, transport and

delivery


ISBN 0 580 49836 0

£49.00 members, £98.00

non-membersB/508/3

PD CEN/TR 15310-5:2006

Guidance on the process of

defining the sampling plan


ISBN 0 580 49837 9

£64.00 members, £128.00

non-membersB/508/3

PD CEN/TR 15472:2006

Postal services. Measurement of

transit times for parcels by the use

of a track and trace system


ISBN 0 580 49750 X

£49.00 members, £98.00

non-membersSVS/4

PD CISPR/TR 16:-



and methods

PD CISPR/TR 16-4-5:2006

Uncertainties, statistics and limit

modelling. Conditions for the use of

alternative test methods


ISBN 0 580 49875 1

£64.00 members, £128.00


PD ISO/TR 17165:-

Hydraulic fluid power. Hose

assemblies

PD ISO/TR 17165-2:2006

Recommended practices for

hydraulic hose assemblies


ISBN 0 580 49867 0

£49.00 members, £98.00

non-membersMCE/18/-/4

AEROSPACE SERIES

BS N:-

Aircraft oxygen systems and

equipment

BS 5N 100-5:2006

Guide to fire and explosion

hazards associated with oxygen,

including handling, storage and

replenishment

supersedes BS 4N 100-5:1999

ISBN 0 580 49312 1

£34.00 members, £68.00

non-membersACE/38

PUBLICLY AVAILABLE

SPECIFICATIONSPAS 69:2006

Guidelines for the specification and

installation of vehicle security

barriers


ISBN 0 580 49683 X

£49.00 members, £98.00

non-members

PAS 83:2006

Guidance on codes of practice,

standardised methods and

regulations for cell-based

therapeutics


ISBN 0 580 49088 2

£18.00 members, £18.00

non-members

of 71PUBLICLY AVAILABLE SPECIFICATIONS

PAS 90:2006

Specification for safe working

practice for on-site maintenance

and repair of industrial trucks


ISBN 0 580 48698 2

£30.00 members, £30.00

non-members

PAS 105:2007

Recovered paper sourcing and

quality. Code of practice

supersedes PAS 105:2005

ISBN 0 580 45246 8

£0.00 members, £0.00 non-members

SPECIALIST BOOKS FROM

BSIBIP 2047:2006

Winning with fire safety. A guide for

business


ISBN 0 580 44095 8

£55.00 members, £55.00

non-members

BIP 2089:2006

A guide to corporate social

responsibility


ISBN 0 580 49310 5

£19.95 members, £19.95

non-members

BIP 2102:2006

Environment management report.

Trends and best practice in waste

management


ISBN 0 580 48412 2

£95.00 members, £95.00

non-members

KITS, SETS, PACKS AND

SERIES

KIT 189

BS 6465 sanitary installations kit


ISBN 0 580 49890 5

£95.00 members, £190.00

non-membersB/503

AMENDMENTS TO BRITISH

STANDARDSBS 848:-

Fans for general purposes

BS 848-2.2:-

Methods of noise testing.

Determination of fan sound power

levels under standardized

laboratory conditions. Reverberant

room method

BS 4875:-

Strength and stability of furniture

BS 4875-7:2006

Domestic and contract storage

furniture. Performance

requirements

CORRIGENDUM 1 AMD 16830

AMD 16830

FW/0

BS 5499:-

Graphical symbols and signs.

Safety signs, including fire safety

signs

BS 5499-11:2002

Water safety signs

AMENDMENT 1 AMD 16783

AMD 16783

PH/8/2

BS 6068:-

Water quality

BS 6068-2.91:-

Physical, chemical and

biochemical methods. Application

of inductively coupled plasma

mass spectrometry (ICP-MS)

BS 6068-5.37:-

Biological methods. Determination

of acute toxicity of marine or


BS 7531:2006

Rubber bonded fibre jointing for

industrial and aerospace purposes.

Specification


AMD 16859

PSE/2

BS 7858:2006

Security screening of individuals

employed in a security

environment. Code of practice


AMD 16681

GW/3

BS 8468:-

Respiratory equipment for use

against chemical, biological,

radiological and nuclear (CBRN)

agents

BS 8468-1:2006

Positive pressure, self-contained,

open-circuit breathing apparatus.

Specification


AMD 16807

PH/4

BS 8888:2006

Technical product specification

(TPS). Specification


AMD 16851

TDW/4

of 71AMENDMENTS TO BRITISH STANDARDS

BS EN 26:1998

Gas fired instantaneous water

heaters for the production of

domestic hot water, fitted with

atmospheric burners


AMD 16769

GSE/29

BS EN 30:-

Domestic cooking appliances

burning gas

BS EN 30-1-3:2003

Safety. Appliances having a glass

ceramic hotplate


AMD 16803

GSE/35

BS EN 542:2003

Adhesives. Determination of

density


AMD 16855

PRI/52

BS EN 543:2003


apparent density of powder and

granule adhesives


AMD 16856

PRI/52

BS EN 1251:-

Cryogenic vessels. Transportable

vacuum insulated vessels of not

more than 1000 litres volume

BS EN 1251-2:2000

Design, fabrication, inspection and

testing


AMD 16822

PVE/18

BS EN ISO 4126:-

Safety devices for protection

against excessive pressure

BS EN ISO 4126-1:2004

Safety valves


AMD 16817

PVE/12

BS EN ISO 4126-2:2003

Bursting disc safety devices


AMD 16820

PVE/12

BS EN 10028:-

Flat products made of steels for

pressure purposes

BS EN 10028-2:2003

Non-alloy and alloy steels with

specified elevated temperature

properties


AMD 16824

ISE/73/2

BS EN 10028-4:2003

Nickel alloy steels with specified

low temperature properties


AMD 16825

ISE/73/2

BS EN 12092:2001


viscosity


AMD 16854

PRI/52

BS EN 13229:2001

Inset appliances including open

fires fired by solid fuels.



AMD 16546

RHE/28

BS EN 13458:-

Cryogenic vessels. Static vacuum

insulated vessels

BS EN 13458-2:2002


testing


AMD 16823

PVE/18

BS EN 13530:-

Cryogenic vessels. Large

transportable vacuum insulated

vessels

BS EN 13530-2:2002


testing


AMD 16816

PVE/18

BS EN 14041:2004

Resilient, textile and laminate floor

coverings. Essential characteristics


AMD 16776

PRI/60

BS EN 14125:2004

Thermoplastic and flexible metal

pipework for underground

installation at petrol filling stations


AMD 16792

PVE/21

BS EN 14398:-

Cryogenic vessels. Large

transportable non-vacuum

insulated vessels


BS EN 14398-2:2003


testing


AMD 16821

PVE/18

BS EN ISO 15605:2004

Adhesives. Sampling


AMD 16857

PRI/52

BS EN ISO/IEC 17025:2005

General requirements for the

competence of testing and

calibration laboratories


AMD 16767

CAS/1

BS EN 60060:-

High voltage test techniques

BS EN 60060-3:2006

Definitions and requirements for

on-site tests


AMD 16784

PEL/42

BS EN 60068:-

Environmental testing

BS EN 60068-2-78:2002

Test methods. Test Cab. Damp

heat, steady state


AMD 15891

GEL/104

BS EN 60335:-

Household and similar electrical

appliances. Safety

BS EN 60335-2-43:2003

Particular requirements for

appliances for clothes dryers and

towel rails


AMD 16827

CPL/61/07

BS EN 60371:-

Insulating materials based on mica

BS EN 60371-3:-

Specifications for individual

materials

BS EN 60371-3-2:2006

Mica paper


AMD 16814

GEL/15/3/11

BS EN 60371-3-5:2006

Glass-backed mica paper with an

epoxy resin binder for

post-impregnation (VPI)


AMD 16813

GEL/15/3/11

BS EN 60664:-

Insulation coordination for

equipment within low-voltage

systems

BS EN 60664-4:2006

Consideration of high-frequency

voltage stress


AMD 16804

GEL/109

BS EN 60684:-

Flexible insulating sleeving

BS EN 60684-3:-

Specifications for individual types

of sleeving

BS EN 60684-3-212:2006

Heat-shrinkable polyolefin

sleevings


AMD 16815

GEL/15/3/5

BS EN 60684-3-233:2006

Heat-shrinkable fluoroelastomer

sleeving, flame retarded, fluid

resistant, shrink ratio 2:1


AMD 16839

GEL/15/3/5

BS EN 60998:-

Connecting devices for low-voltage

circuits for household and similar

purposes

BS EN 60998-2-3:2004


connecting devices as separate

entities with insulation-piercing

clamping units


AMD 16841

PEL/23/2

BS EN 61000:-


(EMC)

BS EN 61000-4-4:2004


techniques. Electrical fast

transient/burst immunity test


AMD 16840

GEL/210/12

BS EN 61009:-

Residual current operated

circuit-breakers with integral

overcurrent protection for

household and similar uses

(RCBO's)


BS EN 61009-1:2004

General rules


AMD 16594

PEL/23/1

BS EN 62040:-

Uninterruptible power systems

(UPS)

BS EN 62040-2:2006


(EMC) requirements


AMD 16838

PEL/22

BS ISO 7540:2006

Ground paprika (Capsicum

annuum L.). Specification


AMD 16834

AW/7

BS ISO TR 10064:-

Code of inspection practice

BS ISO TR 10064-2:1996

Inspection related to radial

composite deviations, runout, tooth

thickness and backlash


AMD 16771

MCE/5

BS ISO 13347:-

Industrial fans. Determination of

fan sound power levels under

standardized laboratory conditions

BS ISO 13347-2:2004

(BS 848-2.2:2004)

Reverberant room method


AMD 16790

MCE/17

BS ISO 13628:-




BS ISO 13628-10:2005

Specification for bonded flexible

pipe


AMD 16775

PSE/17/-/4

BS ISO 13679:2002


industries. Procedures for testing

casing and tubing connections


AMD 16774

PSE/17

DD ISO/TS 16489:2006

Water quality. Guidance for

establishing the equivalency of

results


AMD 16787

EH/3/2

BS ISO 16712:2005

(BS 6068-5.37:2005)


acute toxicity of marine or



AMD 16801

EH/3/5

BS ISO 17294:-

Water quality. Application of

inductively coupled plasma mass

spectrometry (ICP-MS)

BS ISO 17294-1:2004

(BS 6068-2.91:2004)

General guidelines


AMD 16802

EH/3/2

BS ISO 19739:2004

Natural gas. Determination of

sulfur compounds using gas

chromatography


AMD 16788

PTI/15

CP 2010:-

Code of practice for pipelines

CP 2010-2:1970

Design and construction of steel

pipelines in land


AMD 16832

PSE/17

UPDATED BRITISH

STANDARDSBS 5410:-

Code of practice for oil firing

BS 5410-1:1997

Installations up to 45 kW output

capacity for space heating and hot

water supply purposes

AMENDMENT 2

£68.00 members, £136.00

non-membersRHE/13

BS EN 1603:1997

Thermal insulating products for

building applications.

Determination of dimensional

stability under constant normal

laboratory conditions

(23$0DC/50% relative humidity)

AMENDMENT 2

£28.00 members, £56.00

non-membersB/540

of 71UPDATED BRITISH STANDARDS

BS EN 1606:1997



Determination of compressive

creep

AMENDMENT 2

£34.00 members, £68.00

non-membersB/540

BS EN 1609:1997



Determination of dimensional short

term water absorption by partial

immersion

AMENDMENT 2

£28.00 members, £56.00

non-membersB/540

BS EN 12430:1998



Determination of behaviour under

point load

AMENDMENT 1

£28.00 members, £56.00

non-membersB/540

BS EN 12431:1998



Determination of thickness for

floating floor insulating products

AMENDMENT 1

£28.00 members, £56.00

non-membersB/540

BS EN 12525:2000

Agricultural machinery. Front

loaders. Safety

AMENDMENT 1

£49.00 members, £98.00

non-membersAGE/6

BS EN 13041:2000

Soil improvers and growing media.

Determination of physical

properties. Dry bulk density, air

volume, water volume, shrinkage

value and total pore space

AMENDMENT 1

£49.00 members, £98.00

non-membersAW/20

BS EN 50117:-

Coaxial cables

BS EN 50117-1:2002

Generic specification

AMENDMENT 1

£34.00 members, £68.00

non-membersEPL/46

BS EN 50216:-

Power transformer and reactor

fittings

BS EN 50216-3:2002

Protective relay for hermetically

sealed liquid-immersed

transformers and reactors without

gaseous cushion

AMENDMENT 2

£28.00 members, £56.00

non-membersPEL/14

BS EN 50216-5:2002

Liquid level, pressure and flow

indicators, pressure relief devices

and dehydrating breathers

AMENDMENT 3

£34.00 members, £68.00

non-membersPEL/14

BS EN 60335:-


appliances. Safety

BS EN 60335-1:2002


AMENDMENT 4

£96.00 members, £192.00

non-membersCPL/61

BS EN 60371:-

Insulating materials based on mica

BS EN 60371-3:-


materials

BS EN 60371-3-4:1996

Polyester film-backed mica paper

with a B-stage epoxy resin binder

AMENDMENT 1

£28.00 members, £56.00

non-membersGEL/15/3/11

BS EN 60371-3-6:1996

Gloss-backed mica paper with a

B-stage epoxy resin binder

AMENDMENT 1

£34.00 members, £68.00


PD CISPR/TR 16:-



and methods

PD CISPR/TR 16-4-3:2004

Uncertainties, statistics and limit

modelling. Statistical

considerations in the determination

of EMC compliance of

mass-produced products

AMENDMENT 1

£56.00 members, £112.00


SPECIAL ANNOUNCEMENTS

of 71SPECIAL ANNOUNCEMENTS

BS MA 7

Specification for manholes with

bolted covers

The withdrawal of this standard

was announced in the December

2006 edition of Update Standards.

A note of objection has since been

received, and the committee have

decided that its withdrawal should

be reviewed.

Contact: Caroline Langdon

Email:

[email protected]/32

ISO/FDIS 1138:2007

Rubber compounding ingredients.

Carbon black. Determination of

sulfur content

This publication was originally an

amendment (ISO

1138:1981/Damd1), however after

the DIS stage it was decided that it

would be changed at FDIS stage to

a full revision of the standard. The

UK intend to adopt this revised

standard if it is now approved at

the FDIS stage.

Contact: Charlotte Armstrong

Email:

[email protected]/50

ISO/DIS 1922

Rigid cellular plastics.

Determination of shear strength

This draft international standard

has now been circulated by

ISO/TC61/SC10, of which the UK

is currently an observer member

since efforts within the industry are

more centralized within CEN.

However copies of the DIS are

available from the Programme

Manager until 27th March, 2007.

Contact: Alex Price

Email: [email protected]

PRI/72

ISO/DIS 8873:-


Spray-applied polyurethane foam

for thermal insulation

ISO/DIS 8873-2

Application










Contact: Alex Price


PRI/72

ISO/DIS 8873-3

Test methods










Contact: Alex Price


PRI/72

BRITISH STANDARDS

PROPOSED FOR

CONFIRMATIONBS 449:-

Specification for the use of

structural steel in building

BS 449-2:1969

Metric units

B/525/31

BS 2853:1957

Specification for the design and

testing of steel overhead runway

beams

B/525/31

BS 4481:-

Bonded abrasive products

BS 4481-2:1983

Specification for dimensions of

grinding wheels and segments

MTE/13

BS 4678:-

Cable trunking

BS 4678-2:1973

Steel underfloor (duct) trunking

PEL/213

BS 4678-4:1982

Specification for cable trunking

made of insulating material

PEL/213

BS 4999:-

General requirements for rotating

electrical machines

BS 4999-140:1987

Specification for voltage regulation

and parallel operation of A.C.

synchronous generators

PEL/2

BS 5950:-

Structural use of steelwork in

building

BS 5950-1:2000

Code of practice for design. Rolled

and welded sections

B/525/31

of 71BRITISH STANDARDS PROPOSED FOR CONFIRMATION

BS 5950-5:1998

Code of practice for design of cold

formed thin gauge sections

B/525/31

BS 5950-6:1995

Code of practice for design of light

gauge profiled steel sheeting

B/525/31

BS 5950-9:1994

Code of practice for stressed skin

design

B/525/31

BS ISO 8529:-

Reference neutron radiations

BS ISO 8529-1:2001

Characteristics and methods of

production

NCE/2

BS ISO 11929:-

Determination of the detection limit

and decision threshold for ionizing

radiation measurements

BS ISO 11929-4:2001

Fundamentals and application to

measurements by use of

linear-scale analogue ratemeters,

without the influence of sample

treatment

NCE/2

BS ISO 12006:-

Building construction. Organization

of information about construction

works

BS ISO 12006-2:2001

Framework for classification of

information

B/500

BS ISO 14152:2001

Neutron radiation protection

shielding. Design principles and

considerations for the choice of

appropriate materials

NCE/2

BRITISH STANDARDS

REVIEWED AND CONFIRMEDBS 2955:1993

Glossary of terms relating to

particle technology

LBI/37

BS 3406:-

Methods for determination of

particle size distribution

BS 3406-1:1986

Guide to powder sampling

LBI/37

BS 3406-4:1993

Guide to microscope and image

analysis methods

LBI/37

BS 3406-9:1997

Recommendations for the filter

blockage method (mesh

obscuration)

LBI/37

BS 3625:1963

Specification for eyepiece and

screen graticules for the

determination of the particle size of

powders

LBI/37

BS 3680:-

Measurement of liquid flow in open

channels

BS 3680-7:2000

Specification of equipment for the

measurement of water level

CPI/113/5

BS 4359:-

Determination of the specific

surface area of powders

BS 4359-2:1982

Recommended air permeability

methods

LBI/37

BS 4359-4:1995

Recommendations for methods of

determination of metal surface

area using gas adsorption

techniques

LBI/37

BS 4604:-

Specification for the use of high

strength friction grip bolts in

structural steelwork. Metric series

BS 4604-1:1970

General grade

B/521

BS 4604-2:1970

Higher grade (parallel shank)

B/521

BS 5531:1988

Code of practice for safety in

erecting structural frames

B/521

BS 5950:-

Structural use of steelwork in

building

of 71BRITISH STANDARDS REVIEWED AND CONFIRMED

BS 5950-2:2001

Specification for materials,

fabrication and erection. Rolled

and welded sections

B/521

BS 5950-3.1:1990

Design in composite construction.

Code of practice for design of

simple and continuous composite

beams

B/525/4

BS 5950-4:1994

Code of practice for design of

composite slabs with profiled steel

sheeting

B/525/4

BS 6043:-

Methods of sampling and test for

carbonaceous materials used in

aluminium manufacture

BS 6043-1:-

Electrode pitch

BS 6043-1.10:2000


content

CII/24

BS 6043-1.11:2000

Determination of the atomic C/H

ratio of the quinoline-insoluble

material

CII/24

BS 6043-1.13:2000

Determination of sulfur content

CII/24

BS 6043-2:-

Electrode coke

BS 6043-2.4:2000

Analysis by X-ray fluorescence

spectroscopy

CII/24

BS 6043-2.9:2000

Determination of particle size

distribution

CII/24

BS 6043-2.10:1996

Determination of electrical

resistivity of calcined coke

granules

CII/24

BS 6043-2.11:1995


content

CII/24

BS 6043-2.13:1996

Determination of tapped bulk

density of green and calcined coke

CII/24

BS 6043-2-18:2001

Determination of total sulfur by the

Eschka method

CII/24

BS 6043-2.20:-

Carboxy reactivity of calcined coke

BS 6043-2.20.1:2001

Determination of the reactivity by a

loss in mass method

CII/24

BS 6043-2.21.1:2001

Determination of the reactivity by

determination of ignition

temperature

CII/24

BS 6043-3:-

Electrodes

BS 6043-3.1:-

Sampling

BS 6043-3.1.1:1999

Sampling of cathodes

CII/24

BS 6043-3.1.2:1999

Sampling of anodes

CII/24

BS 6043-3.3:2000

Determination of the bulk density

(apparent density) of cathode

blocks and prebaked anodes using

a dimensions method

CII/24

BS 6043-3.4:2000

Determination of the open porosity

and bulk density (apparent density)

of cathode blocks and prebaked

anodes by a hydrostatic method

CII/24

BS 6043-3.5.1:2000

Determination of flexural strength.

Three point method

CII/24

BS 6043-3.6:2000

Determination of electrical

resistivity of cathode blocks and

prebaked anodes at ambient

temperature

CII/24

BS 6043-3.8.1:2001

Carboxy reactivity of prebaked

anodes. Determination of the

reactivity by a loss in mass method

CII/24


BS 6043-3.9.1:2002

Chemical reactivity to air of

prebaked anodes. Determination of

the reactivity by a loss in mass

method

CII/24

BS 6043-4.1:2000

Cold ramming pastes. Methods of

sampling

CII/24

BS 6161:-

Methods of test for anodic

oxidation coatings on aluminium

and its alloys

BS 6161-18:1991

Determination of surface abrasion

resistance

STI/32

BS 6920:-

Suitability of non-metallic products

for use in contact with water

intended for human consumption

with regard to their effect on the

quality of the water

BS 6920-2:-

Methods of test

BS 6920-2.2:-

Odour and flavour of water

BS 6920-2.2.2:2000

Method of testing odours and

flavours imparted to water by

hoses and composite pipes and

tubes

EH/6

BS 6920-2.2.3:2000

Method of testing odours and

flavours imparted to water by

hoses for conveying water for food

and drink preparation

EH/6

BS 6920-2.3:2000

Appearance of water

EH/6

BS 6920-2.4:2000

Growth of aquatic micro-organisms

test

EH/6

BS 6920-3:2000

High temperature tests

EH/6

BS 7022:1988

Guide for geophysical logging of

boreholes for hydrogeological

purposes

CPI/113

BS 7405:1991

Guide to selection and application

of flowmeters for the measurement

of fluid flow in closed conduits

CPI/30

BS 7591:-

Porosity and pore size distribution

of materials

BS 7591-1:1992

Method of evaluation by mercury

porosimetry

LBI/37

BS 7591-2:1992

Method of evaluation by gas

adsorption

LBI/37

BS 7591-4:1993

Method of evaluation by liquid

expulsion

LBI/37

BS 7843:-

Guide to the acquisition and

management of meteorological

precipitation data

BS 7843-3.1:1999

Specification for raingauges.

Storage raingauges

CPI/113

BS 7898:1997

Guide to hydrometric data

management

CPI/113

BS ISO 9083:2001

Calculation of load capacity of spur

and helical gears. Application to

marine gears

MCE/5

BS ISO 10300:-

Calculation of load capacity of

bevel gears

BS ISO 10300-1:2001

Introduction and general influence

factors

MCE/5

BS ISO 10300-2:2001

Calculation of surface durability

(pitting)

MCE/5

BS ISO 10300-3:2001

Calculation of tooth root strength

MCE/5


BS ISO 14606:2000

Surface chemical analysis. Sputter

depth profiling. Optimization using

layered systems as reference

materials

CII/60

BS ISO 14706:2000

Surface chemical analysis.

Determination of surface elemental

contamination on silicon wafers by

total-reflection X-ray fluorescence

(TXRF) spectroscopy

CII/60

BS C 15:1960

Specification for coupling

dimensions for aircraft-to-tractor

tow bar connections

ACE/57

BRITISH STANDARDS

DECLARED OBSOLESCENTBS 7044:-

Artificial sports surfaces

BS 7044-4:1991

Specification for surfaces for

multi-sports use

PRI/57

BRITISH STANDARDS

PROPOSED FOR

WITHDRAWALBS 7568:-

Press tools

BS 7568-25:1993

Guide pillars. Types

MTE/12

BS 7568-26:1993

Guide pillars. Type A, straight

pillars

MTE/12

BS 7568-27:1993

Guide pillars. Type B, end-locking

pillars

MTE/12

BS 7568-28:1993

Guide pillars. Type C, pillars with

taper lead and bush

MTE/12

BS 7568-29:1993

Guide pillars. Type D, end-locking

pillars with flange

MTE/12

BRITISH STANDARDS

WITHDRAWNBS 684:-

Methods of analysis of fats and

fatty oils

BS 684-2.25:1997

Other methods. Determination of

oxidative stability (accelerated

oxidation test)

AW/307

BS 770:-

Methods for chemical analysis of

cheese

BS 770-11:1997

Calculation of the content of added

citrate emulsifying agents and

acidifiers/pH-controlling agents in

processed cheese and processed

cheese products

AW/5

BS 2011:-

Basic environmental testing

procedures

BS 2011-2.1:-

Tests

BS 2011-2.1Ca:1977

Damp heat, steady state

GEL/104

BS 2011-2.1Cb:1990

Damp heat, steady state, primarily

for equipment

GEL/104

BS 2782:-

Methods of testing plastics.

Chemical properties

BS 2782-4:Method 454D:1978


(including water) of PVC resins

PRI/21

BS 3970:-

Sterilizing and disinfecting

equipment for medical products

BS 3970-6:1993

Specification for sterilizers using

low-temperature steam with

formaldehyde

LBI/35

BS 4147:1980

Specification for bitumen-based

hot-applied coating materials for

protecting iron and steel, including

suitable primers where required

ISE/16

BS 5350:-

Methods of test for adhesives

BS 5350-B1:1978

Determination of density

PRI/52

BS 5350-B8:1990

Determination of viscosity

PRI/52

of 71BRITISH STANDARDS WITHDRAWN

BS 5350-E2:1979

Guide to sampling

PRI/52

BS 5524:-

Gas-insulated metal-enclosed

switchgear for rated voltages of

72.5 kV and above

BS 5763:-

Methods for microbiological

examination of food and animal

feeding stuffs

BS 5763-3:1991

Enumeration of coliforms. Most

probable number technique

AW/9

BS 5947:1992

Method of test for static loading of

protective cabs and frames for

agricultural wheeled tractors,

including acceptance conditions

AGE/6

BS 6331:-

Mounting dimensions of single rod

double acting hydraulic cylinders

BS 6331-4:1985

Specification for 63 bar series,

including associated components

MCE/18

BS 6413:-


related products (class L)

BS 6413-5:1988

Classification for family T (turbines)

PTI/7

BS 6444:-

Cardiovascular implants

BS 6444-1:1990

Methods of test for heart valve

substitutes and requirements for

their packaging and labelling

CH/150/2

BS 7087:-

Herbs and spices ready for food

use

BS 7087-11:1996

Specification for ground paprika

AW/7

BS 7208:-

Contact lenses

BS 7208-9:-

Optics and optical instruments.

Determination of strains for rigid

contact lenses

BS 7690:1993

Test methods for induction channel

furnaces

PEL/27

BS 7691:1994

Methods for testing resistance to

environmental conditions of

electronic equipment used in

agriculture and horticulture

AGE/6

BS 7777:-

Flat-bottomed, vertical, cylindrical

storage tanks for low temperature

service

BS 7777-1:1993

Guide to the general provisions

applying for design, construction,

installation and operation

PVE/15

BS 7777-2:1993

Specification for the design and

construction of single, double and

full containment metal tanks for the

storage of liquefied gas at

temperatures down to -165$0DC

PVE/15

BS 7777-3:1993

Recommendations for the design

and construction of prestressed

and reinforced concrete tanks and

tank foundations, and for the

design and installation of tank

insulation, tank liners and tank

coatings

PVE/15

BS EN 725:-


Methods of test for ceramic

powders

BS EN 725-6:1996

Determination of the specific

surface area

RPI/13

BS EN 725-7:1996

Determination of the absolute

density

RPI/13

BS EN 873:1997

Light conveyor belts. Principal

characteristics and applications

PRI/67

BS EN 971:-

Paints and varnishes. Terms and

definitions for coating materials

BS EN 971-1:1996

General terms

STI/11


BS EN 1637:1999

Light conveyor belts. Test methods

for the measurement of the

electrical resistances

PRI/67

BS EN 1718:1999

Light conveyor belts. Test method

for the measurement of the

electrostatic field generated by a

running light conveyor belt

PRI/67

BS EN 1722:1999


for the determination of the

maximum tensile strength

PRI/67

BS EN 1723:2000

Light conveyor belts. Method of

test for the determination of the

relaxed elastic modulus

PRI/67

BS EN 1724:1999


for the determination of the

coefficient of friction

PRI/67

BS EN ISO 9340:1999

(BS 7208-9:1999)

Optics and optical instruments.

Contact lenses. Determination of

strains for rigid contact lenses

MCE/18

BS EN 12006:-

Non-active surgical implants.

Particular requirements for cardiac

and vascular implants

BS EN 12006-1:1999

Heart valve substitutes

CH/150/2

BS EN ISO 21269:2004

Hexagon socket head cap screws

with metric fine pitch thread

FME/9/3

BS EN 29333:1992

Specification for dental brazing

materials

CH/106/2

BS EN 60298:1996

A.C. metal-enclosed switchgear

and controlgear for rated voltages

above 1 kV and up to and including

52 kV

PEL/17/1

BS EN 60517:1997

(BS 5524:1992)

Gas-insulated metal-enclosed

switchgear for rated voltages of

72.5 kV and above

PEL/17/1

BS EN 60646:1999

Test methods for crucible induction

furnaces

PEL/27

BS EN 60947:-

Specification for low-voltage

switchgear and controlgear

BS EN 60947-5-1:1998

Control circuit devices and

switching elements.

Electromechanical control circuit

devices

PEL/17/2

DD ENV 61111:2002

Matting of insulating material for

electrical purposes

PEL/78

DD ENV 61112:2002

Blankets of insulating material for

electrical purposes

PEL/78

BS EN 61300:-

Fibre optic interconnecting devices

and passive components. Basic

test and measurement procedures

BS EN 61300-2:-

Tests

BS EN 61300-2-3:1997

Static shear load

GEL/86/2

BS EN 61300-2-20:1997

Climatic sequence

GEL/86/2

BS EN 61300-2-31:1997

Nuclear radiation

GEL/86

BS ISO/IEC 13250:2000

Information technology. SGML

applications. Topic maps

IST/41

BS ISO/IEC 14496:-

Information technology. Coding of

audio-visual objects

BS ISO/IEC 14496-16:2004

Animation framework extension

(AFX)

IST/37

BS IEC 60050:-

International electrotechnical

vocabulary

BS IEC 60050-351:1998

Automatic control

GEL/1


PD 6534:1993

Guide to the use in the UK of DD

ENV 206:1992. Concrete.

Performance, production, placing

and compliance criteria

B/517/1

BRITISH STANDARDS UNDER

REVIEWBS 4607:-

Non-metallic conduits and fittings

for electrical installations

BS 4607-5:1982

Specification for rigid conduits,

fittings and components of

insulating material

PEL/213

BS EN 1369:1997

Founding. Magnetic particle

inspection

ISE/NFE/9

BS EN 1370:1997

Founding. Surface roughness

inspection by visual tactile

comparators

ISE/NFE/9

BS EN 1754:1997

Magnesium and magnesium alloys.

Magnesium and magnesium alloy

anodes, ingots and castings.

Designation system

NFE/35

BS EN ISO 4516:2002

Metallic and other inorganic

coatings. Vickers and Knoop

microhardness tests

STI/33

NEW WORK STARTED

BS 2975:-

Sampling and analysis of glass

making sands

BS 2975-2

Methods for chemical analysis

will partially supersede BS 2975:1988

LBI/36/5

BS 3108:-

Sampling and analysis of glass

making limestone and dolomite

BS 3108-1 (Revision)

Specification, methods for

sampling and physical testing

will supersede BS 3108:1980

LBI/36/1


Methods for chemical analysis


LBI/36/1

BS 5335:-

Specification for quilts

BS 5335-1:1991/Amendment 1

Quilts with fillings other than

feather and or down

TCI/66

BS 5444 (Revision)

Recommendations for preparation

of copy for microcopying


IDT/1

BS 6105:-

Blanks for superabrasive

cutting-off wheels

BS 7273:-

Code of practice for the operation

of fire protection measures


Electrical actuation of pre-action

water mist and sprinkler systems

will supersede BS 7273-3:2000

FSH/12/4

BS 7273-5

Electrical actuation of water mist

systems

FSH/12/4

BS 7858:2006/Amendment 1

Security screening of individuals

employed in a security

environment. Code of practice

GW/3

BS 9004

Gas meter box. Specification

GSE/25

DD XXXX

Safety requirements for electrical

equipment rated for use by children

and young people in educational

establishments

EPL/66

BS EN 40:-

Lighting columns

BS EN 40-3-3 (Revision)

Design and verification. Verification

by calculation

will supersede BS EN 40-3-3:2003

B/509/50

BS EN 338 (Revision)

Structural timber. Strength classes

will supersede BS EN 338:2003

B/518


Structural timber. Determination of

characteristic values of mechanical

properties and density


B/518

of 71NEW WORK STARTED


Timber structures. Structural

timber and glued laminated timber.

Determination of some physical

and mechanical properties


B/518

BS EN 543:2003/Corrigendum


apparent density of powder and

granule adhesives

PRI/52

BS EN ISO 661:2005/Corrigendum

Animal and vegetable fats and oils.

Preparation of test sample

AW/307

DD CEN/TS 1187 (Revision)

Test methods for external fire

exposure to roofs

will supersede DD ENV 1187:2002

FSH/22/8


Timber structures. Glued laminated

timber. Strength classes and

determination of characteristic

values


B/518


Timber structures. Test methods.

Withdrawal capacity of timber

fasteners


B/518



Pull through resistance of timber

fasteners


B/518

BS EN 3155:-



connection

BS EN 3155-005:2006/Corrigendum


crimp, class T. Product standard

ACE/6/-/3

BS EN 4496:2005/Corrigendum

Aerospace series. Screws, 100$0D

countersunk normal head, offset

cruciform recess, close tolerance

normal shank, short thread, in

titanium alloy, anodized, with

aluminium pigmented coating.

Classification: 1 100MPa (at

ambient temperature) / 315$0DC

ACE/12

BS EN ISO 10993:-

Biological evaluation of medical

devices

BS EN ISO 10993-5 (Revision)

Tests for in vitro cytotoxicity

will supersede BS EN ISO

10993-5:1999CH/194

BS EN 12369:-

Wood-based panels. Characteristic

values for structural design

BS EN 12369-3

Solid-wood panels

B/541



Wrought and cast materials.

Special requirements for materials

intended for pressure purposes


NFE/35

BS EN 12737:2004/Amendment 1

Precast concrete products. Floor

slats for livestock

B/524


Child use and care articles.

Reclined cradles


CW/41

BS EN 13203:-

Solar supported gas-fired domestic

appliances producing hot water.

Appliances not exceeding 70kW

heat input and 500 litres water

storage capacity

BS EN 13203-3

Assessment of energy

consumption

GSE/29

BS EN 13225

Precast concrete products. Linear

structural elements

B/524


Solid wood panels (SWP).

Requirements


B/541


Solid wood panels. Bonding

quality. Test method

will supersede DD CEN/TS

13354:2003B/541

BS EN 13369

Common rules for precast concrete

products

B/524


BS EN 13566:-

Plastics piping systems for

renovation of underground

non-pressure drainage and

sewerage networks

BS EN 13566-3:2002/Amendment 1

Lining with close-fit pipes

PRI/88/3

BS EN ISO 13628:-




BS EN ISO

13628-1:2005/Amendment 1

General requirements and

recommendations

PSE/17/-/4

BS EN 13747

Precast concrete products. Floor

plates for floor systems

B/524

BS EN ISO 13855

Safety of machinery. The

positioning of protective equipment

in respect of approach speeds of

parts of the human body


MCE/3

BS EN 14175:-

Fume cupboards

BS EN 14175-1

Vocabulary

LBI/18

BS EN 14175-2

Safety and performance

requirements

LBI/18


Timber structures. Product

requirements for prefabricated

structural members assembled

with punched metal plate fasteners


B/518

BS EN 14354

Wood-based panels. Wood veneer

floor covering

B/541

BS EN 14647

Calcium aluminate cement.

composition, specification and

conformity criteria

B/516/6

BS EN 14648

Building hardware. Fittings for

shutters. Requirements and test

methods

B/538


Test method for metallic fibered

concrete. Measuring the flexural

tensile strength (limit or

proportionality (LOP), residual)

B/524


Test method for metallic fibre

concrete. Measuring the fibre

content in fresh and hardened

concrete

B/524

DD CEN/TS 15643:-

Sustainability of construction

works. Framework for assessment

of integrated building performance

DD CEN/TS 15643-1

Environmental, health and comfort

and life cycle cost performances

B/558

BS EN ISO 21809:-


industries. External coatings for

buried and submerged pipelines

used in pipeline transportation

systems

BS EN ISO 21809-5

External concrete coatings

PSE/17/2

BS EN ISO 23251 (Revision)


natural gas industries.

Pressure-relieving and

depressuring systems

will supersede BS ISO 23251:2006

PSE/17/-/6

BS EN 50122:-

Railway applications. Fixed

installations. Electrical safety,

earthing and bonding

BS EN 50122-1 (Revision)

Protective provisions relating to

electrical safety and earthing

will supersede BS EN 50122-1:1998

GEL/9/3

BS EN 60352:-

Solderless connections

BS EN 60352-8

Compression mount connections.

General requirements, test

methods and practical guidance

EPL/48

BS EN 60512:-

Connectors for electronic

equipment. Tests and

measurements


BS EN 60512-9-3:2006/Corrigendum

Endurance tests. Test 9c:

Mechanical operation

(engaging/separating) with

electrical load

EPL/48

BS EN 60512-12:-

Soldering tests

BS EN

60512-12-2:2006/Corrigendum

Test 12b: Solderability, wetting,

soldering iron method

EPL/48

BS EN


Test 12c: Solderability, de-wetting

EPL/48

BS EN


Test 12d: Resistance to soldering

heat, solder bath method

EPL/48

BS EN


Test 12e: Resistance to soldering

heat, soldering iron method

EPL/48

BS EN 60601:-

Medical electrical equipment

BS EN 60601-1-8

General requirements for safety.

Collateral standard. General

requirements, tests and guidance

for alarm systems in medical

electrical equipment and medical

electrical systems

CH/62/1

BS EN 61338:-

Waveguide type dielectric

resonators

BS EN 61338-1-4:2006/Corrigendum

General information and test

conditions. Measurement method

of complex relative permittivity for

dielectric resonator materials at

millimetre-wave frequency

EPL/49

BS EN 61391:-

Ultrasonics. Pulse echo scanners

BS EN 61391-2

Techniques for measurement of

maximum depth of visualization

and d the displayed dynamic range

EPL/87

BS EN 61557:-

Electrical safety in low voltage

distribution systems up to 1000 V

A.C. and 1500 V D.C. Equipment

for testing, measuring or

monitoring of protective measures

BS EN 61557-11

Effectiveness of residual current

monitors (RCMs) type A and type

B in TT, TN and IT systems

PEL/85

BS EN 61892:-

Mobile and fixed offshore units.

Electrical installations

BS EN 61892-3

Equipment

will supersede BS IEC 61892-3:1999

JPEL/18

BS EN 61892-6

Installation


JPEL/18

BS EN 61892-7

Hazardous areas


JPEL/18

BS EN 62431

Measurement methods for

reflectivity of electromagnetic wave

absorbers in millimetre wave

frequency

will supersede DD IEC/PAS

62431:2005EPL/46/2

BS EN ISO XXXXX

Performance testing of safety

devices against excessive

pressure

PVE/12

BS EN 00124095


Torsional strength and resistance

to driving of screws

B/518

BS EN 00124096


Withdrawal capacity of punched

metal plate fasteners

B/518

BS ISO 1922

Rigid cellular plastic. Determination

of shear strength

PRI/72

BS ISO 4378:-

Plain bearings. Terms, definitions,

classification and symbols

BS ISO 4378-1

Design, bearing materials and their

properties

MCE/12


BS ISO 4378-2

Friction and wear

MCE/12

BS ISO 4378-3

Lubrication

MCE/12

BS ISO 4869:-


BS ISO 4869-2:1995/Corrigendum

Estimation of effective A-weighted

sound pressure levels when

hearing protectors are worn

PH/7

BS ISO 6104:2005/Corrigendum

Superabrasive products. Rotating

grinding tools with diamond or

cubic boron nitride. General

survey, designation and

multilingual nomenclature

MTE/13


Manually guided cutting-off in

building and civil engineering

MTE/13


Hand-held cutting-off in building

and civil engineering

MTE/13

BS ISO 7590

Steel cord conveyor belts. Methods

for the determination of total

thickness and cover thickness

PRI/67

BS ISO 8611:-

Pallets for materials handling. Flat

pallets

BS ISO 8611-1

Test methods

PKW/0

DD ISO/TS 8611-2

Performance requirements and

selection of tests for flat pallets

PKW/0

DD ISO/TS 8611-3

Maximum working load

PKW/0

BS ISO XXXX

Determination of the emission of

semi-volatile organic compounds

for building products. Micro

chamber method

EH/2/3

DD ISO/TS 12032

Document imaging. Statistical

sampling for document images

IDT/1/2

BS ISO 12776

Pallets. Slip sheets

PKW/0

BS ISO 14717

Oil of origanum, Spanish type

[Coridothymus capitatus (L.) Rchb.

f. syn.thymus capitatus (L.)

Haffmanns. & Link]

AW/54

BS EN ISO 14890:2003/Corrigendum

Conveyor belts. Specification for

rubber or plastics covered

conveyor belts of textile

construction for general use

PRI/67

BS ISO 16345

Cooling towers. Testing and rating

for performance

RHE/17

BS ISO/IEC 18004:-

Information technology.

Radio-frequency identification for

item management

BS ISO/IEC 18004-4 (Revision)

Parameters for air interface

communications at 2, 45 GHz

will supersede BS ISO/IEC

18004:2000IST/34

BS ISO 18549:-

Metallic powders. Determination of

apparent density and flow rate at

elevated temperatures

BS ISO 18549-1

Determination of apparent density

at elevated temperatures

ISE/65

BS ISO/IEC 20000:-

Information technology. Service

management

BS ISO/IEC 20000-3

Guide on compliance with ISO/IEC

20000-1

IST/15/-/8

BS ISO 21549:-

Health informatics: patient

healthcard data

BS ISO 21549-8

Links

IST/35

BS ISO 22006

Quality management systems.

Guidelines for the application of

ISO 9001:2000 in crop production

AW/90


BS ISO 22178

Intelligent transport systems. Low

speed following systems.

Performance requirements and test

procedures

EPL/278

BS ISO 26910:-

Springs. Shot peening

BS ISO 26910-1

General procedures

GME/15

BS ISO 27547:-

Plastics. Preparation of test

specimens of thermoplastic

materials using mouldless

technologies

BS ISO 27547-1

General principles, and

laser-sintering of specimens

PRI/82

BS ISO TS 28479

Crop protection equipment.

Substitute materials for testing

AGE/15

BS ISO 28981

Mopeds. Methods for setting the

running resistance on a chassis

dynamometer

AUE/14

DD IEC/TS 60479:-

Effects of current on human beings

and livestock

DD IEC/TS

60479-1:2005/Corrigendum

General aspects

JPEL/64

BS IEC 60919:-

Performance of high-voltage D.C.

(HVDC) systems

BS IEC 60919-2

Faults and switching

PEL/22

DD IEC/TS 62239 (Revision)

Process management for avionics.

Preparation of an electronic

components management plan

will supersede DD IEC/TS 62239:2003

GEL/107

PD CEN/TR 14383:-

Prevention of urban planning by

urban planning and building design

PD CEN/TR 14383-2

Urban planning

will supersede DD ENV 14383-2:2003

B/562

PD ISO/TR 28118

Information and documentation.

Performance indicators for national

libraries

IDT/2/15

PD IEC/TR IEC 61946

Mineral insulating oils.

Characterisation of the paraffinic /

naphthenic nature by low

temperature differential scanning

calorimetry. Test method

GEL/10

PAS 911

Fire strategies for businesses.

Guidance and framework for their

formulation

ZZ/1

DRAFT BRITISH STANDARDS

FOR PUBLIC COMMENT

06/30058730 DC

ISO 12651 Electronic imaging.

Vocabulary

IDT/1/3

06/30111445 DC

BS ISO 369 Machine tools.

Symbols for indications appearing

on machine tools

MTE/1

06/30112041 DC

EN ISO 9241-304 Ergonomics of

human-system interaction. Part

304. User performance test

methods

PH/9

06/30117301 DC

ISO 16754 Earth-moving

machinery. Determination of

ground contact pressure. Crawler

machines

B/513/1

06/30125306 DC

EN 15609 LPG equipment and

accessories. LPG propulsion

systems for boats, yachts and

other craft. Installation

requirements

PVE/19

06/30126364 DC

IEC 80000-14 Quantities and units.

Part 14. Telebiometrics related to

human physiology

SS/7

06/30128759 DC

BS ISO 15086-3 Hydraulic fluid

power. Determination of the

fluid-borne noise characteristics of

components and systems. Part 3.

Measurement of hydraulic

impedance

MCE/18/-/8

of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

06/30133574 DC

BS 5979 Code of practice for

remote centres receiving signals

from security systems

GW/1/11

06/30135901 DC

ISO 14132-5 Optics and photonics.

Vocabulary for telescopic systems.

Part 5. Terms for night vision

systems

CPW/172

06/30137137 DC

ISO 11992-3 AMD1 Road vehicles.

Interchange of digital information

on electrical connections between

towing and towed vehicles. Part 3.

Application layer for equipment

other than brakes and running gear

AUE/16

06/30137313 DC

ISO/IEC 81060-1 Non-invasive

sphygmomanometers. Part 1.

Requirements and test methods for

mechanical type

CH/62/4

06/30138756 DC

ISO 12620 Terminology and other

content and language resources.

Data categories. Specification of

data categories and management

of a data category registry for

language resources

TS/1

06/30139418 DC

EN 15602 Security service

providers. Terminology

GW/3

06/30141785 DC

ISO 4918 Resilient, textile and

laminate floor coverings. Castor

chair test

PRI/60

06/30141790 DC

BS ISO 10245-1 Cranes. Limiting

and indicating devices. Part 1.

General

MHE/3

06/30144982 DC

EN 1301-1 Aluminium and

aluminium alloys. Drawn wire. Part

1. Technical conditions for

inspection and delivery

NFE/35

06/30144985 DC



2. Mechanical properties

NFE/35

06/30144988 DC



3. Tolerances on dimensions

NFE/35

06/30145817 DC

BS ISO 23499 Coal. Determination

of bulk density

PTI/16

06/30145835 DC

BS ISO 10329 Coal. Determination

of plastic properties.

Constant-torque Giessler

plastometer method

PTI/16

06/30146339 DC

ISO 16000-16 Indoor air. Part 16.

Detection and enumeration of

moulds. Sampling by filtration

EH/2/3

06/30146347 DC

ISO 16000-17 Indoor air. Part 17.

Detection and enumeration of

moulds. Culture-based method

EH/2/3

06/30146511 DC

BS ISO 18113-1 Clinical laboratory

testing and in vitro diagnostic

medical systems. Information

supplied by the manufacturer

(labelling). Part 1. Terms,

definitions and general

requirements

CH/212

06/30146515 DC





(labelling). Part 2. In vitro

diagnostic reagents for

professional use

CH/212

06/30146518 DC






diagnostic instruments for

professional use

CH/212

06/30146522 DC






diagnostic reagents for self-testing

CH/212

06/30146526 DC






diagnostic instruments for

self-testing

CH/212


06/30147281 DC

BS 7499 Static site guarding and

mobile patrol services. Code of

practice

GW/3

06/30148066 DC

BS 8487 Design and construction

of gas boosters used in association

with combustion equipment.

Specification

GSE/33

06/30148102 DC

ISO/IEC 15420 Information

technology. Automatic identification

and data capture techniques.

EAN/UPC bar code symbology

specification

IST/34

06/30148192 DC

BS EN 61169-4:2007

Radio-frequency connectors. Part

4. R.F. coaxial connectors with

inner diameter of outer conductor

16 mm (0.63 in) with screw lock.

Characteristic impedance 50 ohms

(Type 7-16)

EPL/46/2

06/30151143 DC

BS ISO 10245-3 Cranes. Limiting

and indicating devices. Part 3.

Tower cranes

MHE/3/5

06/30151146 DC

BS ISO 11660-3 Cranes. Access,

guards and restraints. Part 3.

Tower cranes

MHE/3

06/30151267 DC

BS ISO CD 10840 Plastics.

Guidance for the use of standard

fire tests

PRI/26

06/30151657 DC

BS EN ISO 3452-5 Non-destructive

testing. Penetrant testing. Part 5.

Penetrant testing at temperatures

higher than 50$0DC

WEE/46

06/30151661 DC

BS EN ISO 3452-6 Non-destructive

testing. Penetrant testing. Part 6.

Penetrant testing at temperatures

lower than 10$0DC

WEE/46

06/30151815 DC

BS ISO 898-1 Mechanical

properties of fasteners made of

carbon steel and alloy steel. Part 1.

Bolts, screws and studs

FME/9/1

06/30151927 DC

BS ISO 14744-1 REV Welding.

Acceptance inspection of electron

beam welding machines. Part 1.

Principles and acceptance

conditions

WEE/-/1

06/30153386 DC

BS ISO 6752 Tools for pressing.

Round punches with 60° conical

head and straight shank

MTE/12

06/30153680 DC

BS ISO 27107 Animal and

vegetable fats and oils.

Determination of peroxide value.

Potentiometric end-point

determination

AW/307

06/30154066 DC

BS ISO/IEC 15457-1 Identification

cards. Thin flexible cards. Part 1.

Physical characteristics

IST/17

06/30155256 DC

BS ISO 2597-2 Iron ores.

Determination of total iron content.

Part 2. Titrimetric methods after

titanium (III) chloride reduction

ISE/58

06/30157290 DC

BS ISO 28003 Security

management systems for the

supply chain. Requirements for

bodies providing audit and

certification of supply chain

security management systems

SME/32

06/30157587 DC

BS ISO 28300 Petroleum,

petrochemical and natural gas

industries. Venting of atmospheric

and low-pressure storage tanks

PSE/17/-/6

06/30157864 DC

BS EN 60947-5-1/prA2

Low-voltage switchgear and

controlgear. Part 5-1. Control

circuit devices and switching

elements. Electromechanical

control circuit devices

PEL/17/2

06/30158008 DC

BS EN 3373-014 Aerospace

series. Terminal lugs and in-line

splices for crimping on electric

conductors. Part 014. In-line

splices, insulated and sealed, for

crimping on copper conductors,

temperature up to 200°C. Product

standard

ACE/6/-/8

06/30158501 DC

BS ISO 11660-1 Cranes. Access,

guards and restraints. Part 1.

General

MHE/3


06/30158613 DC

BS EN 15607 Foodstuffs.

Determination of d-biotin by HPLC

AW/-/3

06/30158810 DC

BS EN 1474-2 Installation and

equipment for liquefied natural gas.

Design and testing of marine

transfer systems. Part 2. Design

and testing of transfer hoses

FSH/18/3

06/30158813 DC

BS EN 1474-3 Installation and

equipment for liquefied natural gas.

Design and testing of marine

transfer systems. Part 3. Offshore

transfer systems

FSH/18/3

06/30158897 DC

BS EN 15606 Foodstuffs.

Determination of acesulfame-K,

aspartame,

neohesperidinedihydrochalcone

and saccharin. High performance

liquid chromatographic method

AW/-/3

06/30158977 DC

BS EN 1124-3 Pipes and fittings of

longitudinally welded stainless

steel pipes with spigot and socket

for waste water systems. Part 3.

System X. Dimensions

ISE/8

06/30159042 DC

BS EN 14349 Chemical

disinfectants and antiseptics.

Quantitative surface test for the

evaluation of bactericidal activity of

chemical disinfectants and

antiseptics used in veterinary area

on non-porous surfaces without

mechanical action. Test method

and requirements (phase 2, step 2)

CH/216

06/30159143 DC

BS EN 15608 Surface active

agents. Quantitative determination

of free fatty acid in

alkylamidopropylbetaines.

Gas-chromatographic method

CII/34

06/30159238 DC

BS EN 61549/prA2 Miscellaneous

lamps

CPL/34/1

06/30159274 DC

BS EN 80601-2-30 Medical

electrical equipment. Part 2-30.

Particular requirements for basic

safety and essential performance

of automated type non-invasive

sphygmomanometers

CH/62/4

06/30159293 DC

BS EN 15597-1 Winter

maintenance equipment.

Spreading machines (gritting

machines). Part 1. Requirements

on dosage and on static test on

dosage

B/513

06/30159311 DC

BS EN 61300-3-13 Fibre optic

interconnecting devices and

passive components. Basic test

and measurement procedures.

Part 3-13. Examinations and

measurements. Control stability of

a fibre optic switch

GEL/86/2

06/30159323 DC



passive components. Basic test

and measurement procedures.

Part 3-9. Examinations and

measurements. Crosstalk

GEL/86/2

06/30159347 DC

BS EN 62148-11 Fibre optic active

components and devices. Package

and interface standards. Part 11.

14-pin pump lasers and

modulator-integrated laser

transmitters

GEL/86/3

06/30159355 DC



passive components performance

standard. Part 085-2.

Non-connectorised single-mode

pigtailed CWDM devices for

category C-controlled environment

GEL/86/2

06/30159359 DC

BS EN 60255-22-1 Measuring

relays and protection equipment.

Part 22-1. Electrical disturbance

tests for measuring relays and

protection equipment. 1 MHz burst

immunity tests

PEL/95

06/30159382 DC

BS ISO 16484-5 Building

automation and control systems.

Part 5. Data communication

protocol

£40.00 members, £80.00

non-membersRHE/2

06/30159392 DC

BS EN 1506 Ventilation for

buildings. Sheet metal air ducts

and fittings with circular

cross-section. Dimensions

RHE/2


06/30159403 DC

BS EN 60450/prA1 Measurement

of the average viscometric degree

of polymerization of new and aged

cellulosic electrically insulating

materials

GEL/112

06/30159429 DC

BS EN 60745-2-19/prA1 Hand-held

motor-operated electric tools.

Safety. Part 2-19. Particular

requirements for jointers

CPL/61/6

06/30159436 DC

EN 15303-1 Design and

application of plasterboard systems

on frames. Part 1. General

B/544/3

06/30159524 DC

BS EN ISO 12625-10 Tissue paper

and tissue products. Part 10.

Determination of demand water

absorption rate and capacity, under

controlled hydraulic pressure

PAI/11

06/30159543 DC

BS EN ISO 21068-1 Chemical

analysis of silicon carbide

containing raw materials and

refractory products. Part 1.

General information and sample

preparation

RPI/1

06/30159547 DC





Determination of loss on ignition,

total carbon, free carbon and

silicon carbide, total and free silica

and total and free silicon

RPI/1

06/30159551 DC





Determination of nitrogen, oxygen

and metallic and oxidic

constituents

RPI/1

06/30159593 DC

BS ISO/IEC 15457-3 Identification

cards. Thin flexible cards. Part 3.

Test methods

IST/17

06/30159628 DC

BS EN 60268-5/prA1 Sound

system equipment. Part 5.

Loudspeakers

EPL/100

06/30159668 DC

BS EN 50508 Multi-purpose

insulating sticks for electrical

operations on high voltage

installations

PEL/78

06/30159671 DC

BS EN 13363-1/prA1 Solar

protection devices combined with

glazing. Calculation of solar and

light transmittance. Part 1.

Simplified method

B/540

06/30159694 DC

BS ISO 23601 Safety identification.

Escape plan signs

PH/8/1

06/30159746 DC

BS EN 50503 Fluids for

electrotechnical applications.

Standard for the inventory control,

management, decontamination

and/or disposal of electrical

equipment and insulating liquids

containing PCBs

GEL/10

06/30159752 DC

BS ISO/IEC 19781-1 Information

technology. Learning, education

and training. Registry. Part 1.

Registry content

IST/43

06/30159756 DC



and training. Registry. Part 2.

Registration authority process

IST/43

06/30159760 DC



and training. Collaborative

workplace. Part 1. Collaborative

workplace data model

IST/43

06/30159763 DC





environment data model

IST/43

06/30159766 DC




technology. Collaborative


group data model

IST/43


06/30159770 DC

BS ISO 2575 AMD5 Road

vehicles. Symbols for controls,

indicators and tell-tales

AUE/12

06/30159843 DC

BS ISO 13680 Petroleum and

natural gas industries. Corrosion.

resistant alloy seamless tubes for

use as casing, tubing and coupling

stock. Technical delivery

conditions

PSE/17/-/5

06/30159940 DC

BS EN 60034-15 Rotating

electrical machines. Part 15.

Impulse voltage withstand levels of

rotating A.C. machines with

form-wound stator coils

PEL/2

06/30159993 DC

BS EN 61373 Railway applications.

Rolling stock equipment. Shock

and vibration tests

GEL/9/2

06/30160003 DC

BS ISO 17712 Freight containers.

Mechanical seals

TW/1

06/30160006 DC

BS EN ISO 11644 Leather. Test for

adhesion of finish

TCI/69

06/30160010 DC

BS EN ISO 3950 Dentistry.

Designation system for teeth and

areas of the oral cavity

CH/106/3

06/30160017 DC

BS ISO 1496-1:1990/DAM 6 Series

1. Freight containers. Specification

and testing. Part 1. General cargo

containers for general purposes.

Amendment 6. Racking test for 45

ft containers

TW/1

06/30160027 DC

BS EN 62055-52 Electricity

metering. payment systems. Part

52. Standard transfer specification

(STS). Physical layer protocol for a

two-way virtual token carrier for

direct local connection

PEL/13

06/30160031 DC

BS ISO 17564 Hydrogenated nitrile

rubber (HNBR). Determination of

residual unsaturation by iodine

value

PRI/23

06/30160034 DC

BS ISO 7781 Styrene-butadiene

rubber, raw. Determination of soap

and organic-acid content

PRI/23

06/30160058 DC

BS EN ISO 8536-4 Infusion

equipment for medical use. Part 4.

Infusion sets for single use, gravity

feed

CH/212

06/30160065 DC

BS EN ISO 11143 ED 2 Dental

equipment. Amalgam separators

CH/106/4

06/30160085 DC

BS ISO 15970 Natural gas.

Measurement of properties.

Volumetric properties. density,

pressure, temperature and

compression factor

PTI/15

06/30160122 DC

ISO/DIS 26603 Plastics. Aromatic

isocyanates for use in the

production of polyurethanes.

Determination of total chlorine

PRI/72/4

06/30160162 DC


series. Electrical contacts used in

elements of connection. Part 074.

Contacts, electrical, quadrax, size

08, male, type E, crimp, class R.

Product standard

ACE/6/-/3

06/30160165 DC


series. Electrical contacts used in

elements of connection. Part 075.

Contacts, electrical, quadrax, size

08, female, type E, crimp, class R.

Product standard

ACE/6/-/3

06/30160259 DC

BS ISO 8829-1 Aerospace. Test

methods for polytetrafluoroethylene

(PTFE) innnertube hose

assemblies. Part 1. Metallic

(stainless steel) braid

ACE/69

06/30160262 DC

BS EN 4642 Aerospace series.

Steel FE-PM 3504

(X4CrNiMo16-5-1). Air melted.

Hardened and tempered. Sheet.

0.6 mm $3L a $3L 50 mm. 900

MPa $3L Rm $3L 1 050 Mpa

ACE/61/-/15


06/30160265 DC

BS ISO 21462 Aerospace. Fluid

systems. Geometrical configuration

of flareless acorn. Inch series

ACE/69

06/30160268 DC



of bosses, fluid connection, internal

straight threads. Inch series

ACE/69

06/30160271 DC



of blunt nose flareless. Inch series

ACE/69

06/30160338 DC

BS EN 50504 Validation of arc

welding equipment

WEE/6

06/30160356 DC

BS EN 60318-4 ED 1

Electroacoustics. Simulators of

human head and ear.

Occluded-ear simulator for the

measurement of earphones

coupled to the ear by insert

EPL/29

06/30160368 DC

BS EN 80100 Basic safety and

essential performance

requirements of clinical

thermometer for body temperature

measurement

CH/121/3

06/30160373 DC

BS EN 60601-2-4 ED 3 Medical

electrical equipment. Particular

requirements for basic safety and

essential performance of cardiac

defibrillators

CH/62/4

06/30160391 DC

BS ISO 5145 AMD 2 Cylinder

valve outlets for gases and gas

mixtures. Selection and

dimensioning

PVE/3

06/30160408 DC

BS EN 60966-2-4 Radio frequency

and coaxial cable assemblies. Part

2-4. Detail specification for cable

assemblies for radio and TV

receivers. Frequency range 0 to 3

000 MHz, IEC 61169-2 connectors

EPL/46

07/30090385 DC

ISO 13408-1 Aseptic processing of

health care products. Part 1.


CH/198

07/30117272 DC

BS ISO/IEC 27005 Information

technology. Security techniques.

Information security risk

management

IST/33

07/30125841 DC

IEC 62097 ED 1.0 Hydraulic

machines. Determination of

performance from model

acceptance tests of radial and axial

flow hydraulic machines with

consideration of scale effects

including the effect of surface

roughness

MCE/15

07/30135157 DC



Time-stamping services. Part 1.

Framework

IST/33

07/30135624 DC



Cryptographic techniques based

on elliptic curves. Part 1. General

IST/33

07/30142135 DC

BS EN 1012-1 Compressors and

vacuum pumps. Safety

requirements. Part 1. Air

compressors

MCE/8/-/4

07/30143612 DC

BS ISO 8586-2 Sensory analysis.

General guidance for the selection,

training and monitoring of

assessors. Part 2. Expert sensory

assessors

AW/12

07/30145003 DC

EN 1386 Aluminium and aluminium

alloys. Tread plate. Specifications

NFE/35

07/30152595 DC

BS IEC 62024-2 High frequency

inductive components. Electrical

characteristics and measuring

methods. Part 2. Rated current of

inductors for D.C. to D.C. converter

EPL/51

07/30154505 DC

BS 3882 Specification for top soil

AW/20

07/30154860 DC

BS 594987 Hot rolled asphalt for

roads and other paved areas.

Specification for transport, laying

and compaction and design

protocols

B/510/1


07/30158318 DC

BS 4N 100-1 AMD 2 Aircraft

oxygen systems and equipment.

Part 1. Design and installation

ACE/38

07/30159086 DC

BS EN 15616 Copper and copper

alloys. Determination of cadmium

content. Flame atomic absorption


RHE/19

07/30159715 DC

BS EN 62317-13 Ferrite cores.

Dimensions. Part 13. PQ-cores for

use in power supply applications

EPL/51

07/30160401 DC

BS EN ISO 9994/prA1 Lighters.

Safety specification

CW/32

07/30160560 DC

PD 5500 AMD 2 Specification for

unfired fusion welded pressure

vessels

PVE/1

07/30160561 DC

BS ISO/IEC 12207 Systems and

software engineering. Software life

cycle processes

£18.00 members, £36.00

non-membersIST/15

07/30160564 DC

BS ISO/IEC 15288 Systems and

software engineering. System life

cycle processes

IST/15

07/30160567 DC

BS ISO/IEC 26514 Software and

systems engineering. User

documentation requirements for

documentation designers and

developers

£18.00 members, £36.00

non-membersIST/15

07/30160570 DC

BS EN 61169-24 Radio-frequency

connectors. Part 24. Sectional

specification. Radio frequency

coaxial connectors with screw

coupling, typically for use in 75

ohm cable distribution systems

(type F)

EPL/46/2

07/30160645 DC

BS EN ISO 15378 Primary

packaging materials for medicinal

products. Particular requirements

for the application of ISO

9001:2000, with reference to good

manufacturing practice (GMP)

CH/212

07/30160659 DC

BS EN 62024-1 High frequency

inductive components. Electrical

characteristics and measuring

methods. Part 1. Nanohenry range

chip inductor

EPL/51

DOCUMENTS NOT ISSUED

AS DPCsBS EN 1367:-

Tests for thermal and weathering

properties of aggregates

BS EN 1367-1:1999

Determination of resistance to

freezing and thawing

The text of this draft European

standard was circulated under the

CEN unique acceptance procedure

for approval to publish. Although

the formal consultation period on

the proposal is now closed, a copy

of the text can be made available

on request using document

reference B/502/6.0041/06 from

the Programme Manager (below).

Contact: Ray Kerrigan


B/502/6

BS EN ISO 22610

Surgical drapes, gowns and clear

air suits, used as medical devices,

for patients, clinical staff and

equipment. Test method to

determine the resistance to wet

bacterial penetration

Please note that copies of this text

are available from the Programme

Manager (below).

Contact: Philippa Younas

Email:

[email protected]/62/1

BS EN 61223:-

Evaluation and routine testing in

medical imaging departments

BS EN 61223-3-6

Acceptance tests. Image display

devices

Copies of the text to this standard,

which has been circulated to

CENELEC members as a draft for

enquiry by CENELEC/TC 62, are


Manager (below).

Contact: Philippa Younas

Email:


of 71DOCUMENTS NOT ISSUED AS DPCs

IEC 61076:-


equipment. Product requirements

IEC 61076-3-117

Rectangular connectors. Protective

housings for use with 8-way

shielded and unshielded

connectors for frequencies up to

1000 MHz for industrial

environments incorporating the

60603-7. Variant 14 related to IEC

61076-3-106. Push pull coupling

This document has been issued at

CD stage to adopt IEC PAS

61076-3-117:2006 as an

international standard. Copies are

available on request from the

contact point (below).

Contact: Committee Service Centre


EPL/48

ISO/DIS 11699:-

Non-destructive testing. Industrial

radiographic film

ISO/DIS 11699-1

Classification of film systems for

industrial radiography

Copies of this document, which is

identical to EN 584-1:2006, are


Manager (below).

Contact: Anne Hannan


WEE/-/1

ISO/IEC 14496:-

Coding of audio-visual objects

ISO/IEC 14496-4:2004/FPDAM 16

Conformance testing. Amendment

16: MPEG-J GFX conformance


which has been circulated to ISO

members as a final committee draft

by ISO/IEC JTC 1/SC 29, are


Manager (below) to whom

comments should be submitted by

19 April, 2007.

Contact: Jean Stride


IST/37

ISO/IEC FCD 21000:-

Information technology. Multimedia

framework (MPEG-21)

ISO/IEC FCD 21000-14

Conformance testing








5 March, 2007.



IST/37

ISO/IEC FCD 23001:-

Information technology. MPEG

systems technologies

ISO/IEC FCD 23001-2

Fragment request units








21 March, 2007.



IST/37

CEN/CENELEC UNIQUE

ACCEPTANCE PROCEDUREEN 13454:-

Binders, composite binders and

factory made mixtures for floor

screeds based on calcium sulfate

EN 13454-2:2003/prA1

Test methods

This draft European amendment

makes a modification to clause

4.4.2.1. Please direct any comment

on this proposed change by e-mail

to the Programme Manager

(below) before 31 March, 2007.

Contact: Bernard Williams

Email:


prEN 1436

Road marking materials. Road

marking performance for road

users

This work failed the CEN formal

vote and this updated draft has

now been issued, for which only

editorial comments will be

considered. Any such comments

should be submitted using the CEN

comment template and e-mailed to

the Programme Manager (below)

before 1 March, 2007.

Contact: Bernard Williams

Email:


CEN EUROPEAN

STANDARDSEN 3:-

Portable fire extinguishers

EN 3-9:2006

Additional requirements to EN 3-7

for pressure resistance of CO$d2

extinguishers

FSH/2

of 71CEN EUROPEAN STANDARDS

EN 30:-

Domestic cooking appliances

burning gas fuel

EN 30-1:-

Safety

EN 30-1-3:-

Appliances having a glass ceramic

hotplate

CORRIGENDUM 1:September 2004

GSE/35

EN 30-1-4:-

Appliances having one or more

burners with an automatic burner

control system

AMENDMENT 1:November 2006

GSE/35

EN 81:-

Safety rules for the construction

and installation of lifts. Particular

applications to passenger lifts and

goods passenger lifts

EN 81-71:-

Vandal resistant lifts

AMENDMENT 1:December 2006

MHE/4

EN 339:2006


AL-P7010-T76. Die forgings. a $3L

200mm

ACE/61/-/24

EN 420:-

Protective gloves. General

requirements and test methods

CORRIGENDUM:November 2006

PH/3/8

EN 455:-

Medical gloves for single use

EN 455-3:2006

Requirements and testing for

biological evaluation

CH/205/3

EN 474:-

Earth-moving machinery. Safety

EN 474-1:2006


B/513/1

EN 474-2:2006

Requirements for tractor-dozers

B/513/1

EN 474-3:2006

Requirements for loaders

B/513/1

EN 474-4:2006

Requirements for backhoe loaders

B/513/1

EN 474-5:2006

Requirements for hydraulic

excavators

B/513/1

EN 474-6:2006

Requirements for dumpers

B/513/1

EN 474-7:2006

Requirements for scrapers

B/513/1

EN 474-8:2006

Requirements for graders

B/513/1

EN 474-9:2006

Requirements for pipelayers

B/513/1

EN 474-10:2006

Requirements for trenchers

B/513/1

EN 474-11:2006

Requirements for earth and landfill

compactors

B/513/1

EN 474-12:2006

Requirements for cable excavators

B/513/1

EN 565:2006

Mountaineering. Tape. Safety


SW/136/5

EN 566:2006

Mountaineering. Slings. Safety


SW/136/5

EN 843:-


Monolithic ceramics. Mechanical

properties at room temperature

EN 843-1:2006


RPI/13

EN 843-2:2006

Determination of Young's modulus,

shear modulus and Poisson's ratio

RPI/13

EN 843-3:2005

Determination of subcritical crack

growth parameters from constant

stressing rate flexural strength

tests

RPI/13


EN 843-4:2005

Vickers, Knoop and Rockwell

superficial hardness

RPI/13

EN 843-5:2006

Statistical analysis

RPI/13

EN 927:-

Paints and varnishes. Coating

materials and coating systems for

exterior wood

EN 927-3:2006

Natural weathering test

STI/28

EN 927-5:2006

Assessment of the liquid water

permeability

STI/28

EN 958:2006

Mountaineering. Energy absorbing

systems for use in kletter-steig (via

ferrata) climbing. Safety


SW/136/5

EN 997:-

WC pans with integral trap


B/503

EN 1015:-

Methods of test for mortar for

masonry

EN 1015-1:-

Determination of particle size

distribution (by sieve analysis)


B/519/2

EN 1015-2:-

Bulk sampling of mortars and

preparation of test mortars


B/519/2

EN 1015-3:-

Determination of consistence of

fresh mortar (by flow table)


B/519/2

EN 1015-6:-

Determination of bulk density of

fresh mortar


B/519/2

EN 1015-9:-

Determination of workable life and

correction time of fresh mortar


B/519/2

EN 1015-10:-

Determination of dry bulk density of

hardened mortar


B/519/2

EN 1015-11:-

Determination of flexural and

compressive strength of hardened

mortar


B/519/2

EN 1093:-

Safety of machinery. Evaluation of

the emission of airborne hazardous

substances

EN 1093-2:2006

Tracer method for assessing the

emission rate of a specified

pollutant

MCE/3

EN 1093-3:2006

Bench test method for the

measurement of the emission rate

of a specified pollutant

MCE/3

EN 1634:-

Fire resistance and smoke control

tests for door and shutter

assemblies, openable windows

and elements of building hardware

EN 1634-1:-

Fire resistance test for doors and

shutter assemblies and openable

windows


FSH/22

EN 2947:2006


FE-PA3004 (X10CrNi18-09). Air

melted. Non heat treated. Cold

drawn wire. A or D $3L 2,3 mm

ACE/61/-/15

EN 3114:-

Aerospace series. Microstructure

of (alpha + beta) titanium alloy

products

EN 3114-001:2006


ACE/61/-/49

EN 3114-003:2006

Microstructure of plate

ACE/61/-/49

EN 3114-004:2006

Microstructure of sheet for

superplastic forming

ACE/61/-/49

EN 3155:-



connection


EN 3155-005:2006



ACE/6/-/3

EN 3155-005:-



CORRIGENDUM 1:December 2006

ACE/6/-/3

EN 3375:-

Aerospace series. Cable, electrical,

for digital data transmission

EN 3375-006:2006

Single braid. 78 Ohms. Type XM.

Product standard

ACE/6/-/2

EN 3375-007:2006

Double braid. 77 Ohms. Type WW.

Product standard

ACE/6/-/2

EN 3491:2006


FE-PM3901 (X15CrNi17-3). Air

melted. Hardened and tempered.

Forgings. De $3L 100 mm. 900

MPa $3L Rm $3L 1 100 MPa

ACE/61/-/15

EN 3507:2006


FE-PL1501 (30CrMo12). Air

melted. Hardened and tempered.

Forgings. De $3L 100 mm. 930

MPa $3L Rm $3L 1080 MPa

ACE/61/-/15

EN 3668:2006

Aerospace series. Heat resisting

alloy NI-PH2301

(NiCr21Fe18Mo9). Non heat

treated. Forging stock. a or D $3L

250mm

ACE/61/-/48

EN 3716:-

Aerospace series. Connector,

single-way with triaxial interface,

for transmission of digital data

EN 3716-006:2006

Crimp plug. Product standard

ACE/6/-/3

EN 3816:2006


FE-PA3601 (X6CrNiT118-10). Air

melted. Softened and cold rolled.

Sheet and strip. a $3L 3 mm. Rm

$3M 800 MPa

ACE/61/-/15

EN 3969:2006


FE-PL1507 (40CrMoV12). Air

melted. Annealed. Forging stock. a

or D $3L 350 mm

ACE/61/-/15

EN 3971:2006

Aerospace series. Steel FE-P1507

(40CrMoV12). Consumable

electrode remelted. Annealed.

Forging stock. a or D $3L 350 mm

ACE/61/-/15

EN 3972:2006


FE-PL1507 (40CrMoV12).

Consumable electrode remelted.

Hardened and tempered. Bar for

machining. De $3L 50 mm. 1 250

MPa $3L Rm $3L 1 400 MPa

ACE/61/-/15

EN 3973:2006


FE-CM3801 (X5CrNiCuNb16-4).

Homogenised, solution treated and

precipitation hardened. Investment

casting. De $3L 50 mm. Rm $3M 1

030 Mpa

ACE/61/-/15

EN 3976:2006

Aerospace series. Titanium and

titanium alloys. Test method.

Chemical analysis for the

determination of hydrogen content

ACE/61/-/49

EN 4003:2006


AL-P2220-T88. Sheet and strip.

0,5 mm $3L a $3L 6 mm

ACE/61/-/24

EN 4008:-

Aerospace series. Elements of

electrical and optical connection.

Crimping tool and associated

accessories

EN 4008-017:2006

Head for crimping tool

M22520/4-01. Product standard

ACE/6/-/3

EN 4049:-

Aerospace series. Thermocouple

extension cable. Operating

temperatures between -65$0DC

and +260$0DC

EN 4049-001:2006

Technical specification

ACE/6/-/2

EN 4049-003:2006

Single core nickel chromium /

nickel-aluminium. Product standard

ACE/6/-/2

EN 4049-004:2006

Two core nickel chromium / nickel

aluminium shielded and jacketed.

Product standard

ACE/6/-/2


EN 4057:-

Cable ties for harnesses. Test

methods

EN 4057-100:2006

Cable ties for harnesses, test

methods. General

ACE/6/-/8

EN 4057-302:2006


methods. Flammability

ACE/6/-/8

EN 4057-304:2006


methods. Loop tensile strength at

maximum working temperature

ACE/6/-/8

EN 4057-306:2006


methods. Heat ageing test

ACE/6/-/8

EN 4057-307:2006

Resistance to ultra violet radiation

ACE/6/-/8

EN 4057-401:2006


methods. Loop tensile strength

ACE/6/-/8

EN 4057-402:2006


methods. Life cycle

ACE/6/-/8

EN 4057-404:2006


methods. Low temperature

installation

ACE/6/-/8

EN 4057-406:2006


methods. Locking barb retention

ACE/6/-/8

EN 4108:2006

Aerospace series. Wrenches, crow

foot attachment socket, socket

drive

ACE/12

EN 4109:2006

Aerospace series. Wrenches,

socket, face spanner

ACE/12

EN 4110:2006

Aerospace series. Wrenches, open

end, box

ACE/12

EN 4158:2006

Aerospace series. Paints and

varnishes. Test method for

measurement of electrical surface

resistance of conductive layers

ACE/65/-/4

EN 4354:2006

Aerospace series. Six lobe recess.

Drivers, relieved

ACE/12

EN 4356:2006


Drivers, short

ACE/12

EN 4357:2006


Drivers, handle

ACE/12

EN 4358:2006


Drivers, double ended, 90$0D

ACE/12

EN 4359:2006


Drivers. Technical specification

ACE/12

EN 4382:2006


alloy NI-PH3601 (NiCr22Mo9Nb).

Solution treated. Seamless tube.

For hydraulic application. D $3L 50

mm, a $3L 3 mm

ACE/61/-/48

EN 4383:2006


alloy NI-CH2601

(NiCr19Fe19Nb5Mo3). Non heat

treated. Remelting stock

ACE/61/-/48

EN 4496:-

Aerospace series. Screws,

100$0Dcountersunk normal head,

offset cruciform recess, close

tolerance normal shank, short

thread, in titanium alloy, anodized,

with aluminium pigmented coating.

Classification: 1 100MPa (at

ambient temperature) / 315$0DC


ACE/12

EN 4530:-

Aerospace series. Sealing sleeves

used in elements of connection

EN 4530-005:2006

Sealing sleeves. For external

diameter cable 3 mm to 4,1 mm.

Product standard

ACE/6/-/3

EN 4530-006:2006

Sealing sleeves. For external

diameter cable 4.68 mm to 5.05

mm. Product standard

ACE/6/-/3


EN 10021:2006

General technical delivery

requirements for steel products

ISE/5

EN 12271:2006

Surface dressing

B/510/2

EN 12674:-

Transport packaging. Roll

containers

EN 12674-4:2006


PKW/0

EN 12923:-


Monolithic ceramics

EN 12923-1:2006

General practice for undertaking

corrosion tests

RPI/13

EN 13445:-

Unfired pressure vessels

EN 13445-6:-

Requirements for the design and

fabrication of pressure vessels and

pressure parts constructed from

spheroidal graphite cast iron


PVE/1

EN 13480:-

Metallic industrial piping

EN 13480-3:-

Design and calculation


PVE/10

EN 13501:-

Fire classification of construction

products and building elements

EN 13501-5:-

Classification using data from

external fire exposure to roofs tests


FSH/22/8

EN 13707:-


Reinforced bitumen sheets for roof

waterproofing. Definitions and

characteristics


B/546/1

EN 13758:-

Textiles. Solar UV protective

properties

EN 13758-1:-

Method of test for apparel fabrics


TCI/66

EN 13758-2:-

Classification and marking of

apparel


TCI/66

EN 13858:2006

Corrosion protection of metals.

Non-electrolytically applied zinc

flake coatings on iron or steel

components

STI/33

EN 13947:2006

Thermal performance of curtain

walling. Calculation of thermal

transmittance

B/540

EN 13964:-

Suspended ceilings. Requirements

and test methods


B/548

EN 13967:-


Plastic and rubber damp proof

sheets including plastic and rubber

basement tanking sheet.

Definitions and characteristics


B/546/2

EN 13969:-


Bitumen damp proof sheets

including bitumen basement

tanking sheets. Definitions and

characteristics


B/546/5

EN 13970:-


Bitumen water vapour control

layers. Definitions and

characteristics


B/546/5

EN 13984:-


Plastic and rubber vapour control

layers. Definitions and

characteristics


B/546/2

EN 14132:2003

Foodstuffs. Determination of

ochratoxin A in barley and roasted

coffee. HPLC method with

immunoaffinity column clean-up

AW/-/3


EN 14133:2003


ochratoxin A in wine and beer.

HPLC method with clean-up on a

immunoaffinity column

AW/-/3

EN 14133:-


ochratoxin A in wine and beer.

HPLC method with immunoaffinity

column clean-up


AW/-/3

EN 14140:-

LPG equipment and accessories.

Transportable refillable welded

steel cylinders for LPG. Alternative

design and construction


PVE/19

EN 14346:2006


Calculation of dry matter by

determination of dry residue or

water content

B/508/3

EN 14354:-

Wood-based panels. Wood veneer

floor covering

CORRIGENDUM 1:November 2006

B/541

EN 14411:2006

Ceramic tiles. Definitions,

classification, characteristics and

marking

B/539

EN 14438:2006

Gas-fired insets for heating more

than one room

GSE/36

EN 14476:-

Chemical disinfectants and

antiseptics. Virucidal quantitative

suspension test for chemical

disinfectants and antiseptics used

in human medicine. Test method

and requirements (phase 2, step 1)

AMENDMENT 1:October 2006

CH/216

EN 14492:-

Cranes. Power driven winches and

hoists

EN 14492-2:2006

Power driven hoists

MHE/3/6

EN 14647:-

Calcium aluminate cement.

Composition, specifications and

conformity criteria


B/516/6

EN 14797:2006

Explosion venting devices

FSH/23

EN 14975:2006

Loft ladders. Requirements,

marking and testing

B/512

EN 14995:2006

Plastics. Evaluation of

compostability. Test scheme and

specifications

PRI/82

EN 15091:2006

Sanitary tapware. Electronic

opening and closing sanitary

tapware

B/504

EN 15115:2006

Textile floor coverings.

Determination of sensitivity to

spilled water

PRI/3

EN 15161:2006

Products used for treatment of

water intended for human

consumption. Anthracite

B/504/13

EN 15168:2006

Surface active agents.

Determination of hydroxyl value.

p-Toluensulfonyl isocyanate (TSI)

method and potentiometric titration

with tetrabutylammonium

hydroxide

CII/34

EN 15219:2006

Water equipment inside buildings.

Nitrate removal devices.

Requirements for performance,

safety and testing

B/504

EN 15257:2006

Cathodic protection. Competence

levels and certification of cathodic

protection personnel

GEL/603

CEN WORKSHOP

AGREEMENTSCWA 15627:2006

Small punch test method for

metallic materials


£68.00 members, £136.00

non-members

CEN REPORTS

CEN/TR 12101:-

Smoke and heat control systems

of 71CEN REPORTS

CEN/TR 12101-4:2006

Installed SHEVS systems for

smoke and heat ventilation

FSH/25

CEN/TR 15481:2006

Welding of reinforcing steel. Tack

weldability. Test methods and

performance requirements

WEE/43

CEN TECHNICAL

SPECIFICATIONSCEN/TS 13547:2006

Industrial valves. Copper alloy ball

valves

PSE/7

CEN/TS 14421:2006

Hose tail and ferrule for crimping

and swaging

PRI/66

CEN/TS 15379:2006

Building management.

Terminology and scope of services

RHE/16

CEN/TS 15440:2006

Solid recovered fuels. Method for

the determination of biomass

content

PTI/17

CENELEC PUBLICATIONS

EN 45020:2006

(ISO/IEC GUIDE 2:2004)

Standardization and related

activities. General vocabulary

QS/3

EN 55014:-

Electromagnetic compatibility.

Requirements for household

appliances, electric tools and

similar apparatus

EN 55014-1:2006

(CISPR 14-1:2005)

Emission

GEL/210/11

EN 55016:-



and methods

EN 55016-1-2:-

(CISPR 16-1-2:2003/AMD 2:2006)

Ancillary equipment. Conducted

disturbances. Update of LISN

specifications


GEL/210/12

EN 55016-2-3:2006

(CISPR 16-2-3:2006)

Methods of measurement of

disturbances and immunity.

Radiated disturbance

measurements

GEL/210/12

EN 60034:-

Rotating electrical machines

EN 60034-26:2006

(IEC 60034-26:2006)

Effects of unbalanced voltages on

the performance of three-phase

cage induction motors

PEL/2

EN 60118:-

Hearing aids

EN 60118-4:2006

(IEC 60118-4:2006)

Induction loop systems for hearing

aid purposes. Magnetic field

strength

EPL/29

EN 60317:-

Specifications for particular types

of winding wires

EN 60317-0-6:-

(IEC 60317-0-6:2001/AMD 1:2006)

General requirements. Glass-fibre

wound resin or varnish

impregnated, bare or enamelled

round copper wire


GEL/55

EN 60335:-


appliances. Safety

EN 60335-2-15:-

(IEC 60335-2-15:2002)


appliances for heating liquids

CORRIGENDUM:December 2006

CPL/61/07

EN 60454:-

Pressure-sensitive adhesive tapes

for electrical purposes

EN 60454-3-8:-

(IEC 60454-3-8:2006)


materials. Woven fabric tapes with

pressure-sensitive adhesive based

on glass, cellulose acetate alone or

combined with viscose fibre


GEL/15/3

EN 60464:-

Varnished used for electrical

insulation

EN 60464-2/A1:-

(IEC 60464-2:2001/A1:2006)

Methods of test


GEL/15/3/7

of 71CENELEC PUBLICATIONS

EN 60512:-


equipment. Tests and

measurements

EN 60512-9-3:-

(IEC 60512-9-3:2006)

Endurance tests. Test 9c:

Mechanical operation

(engaging/separating) with

electrical load


EPL/48/2

EN 60512-12:-

Soldering tests

EN 60512-12-2:2006

(IEC 60512-12-2:2006)

Test 12b: Solderability, wetting,

soldering iron method

EPL/48/2

EN 60512-12-3:-

(IEC 60512-12-3:2006)

Test 12c: Solderability, de-wetting


EPL/48/2

EN 60512-12-4:-

(IEC 60512-12-4:2006)

Test 12d: Resistance to soldering

heat, solder bath method


EPL/48/2

EN 60512-12-5:-

(IEC 60512-12-5:2006)

Test 12e: Resistance to soldering

heat, soldering iron method


EPL/48/2

EN 60670:-

Boxes and enclosures for electrical

accessories for household and

similar fixed electrical installations

EN 60670-22:2006

(IEC 60670-22:2003 MODIFIED)


connecting boxes and enclosures

PEL/23

EN 60745:-

Safety of hand-held

motor-operated electric tools

EN 60745-2-6:-

(IEC 60745-2-6:2003/AMD 1:2006)


hammers

AMENDMENT 1:May 2006

CPL/61/6

EN 60929:-

(IEC 60929:2006)

A.C.-supplied electronic ballasts for

tubular fluorescent lamps.



CPL/34/3

EN 60947:-


controlgear

EN 60947-4-2:-

(IEC 60947-4-2:1999/AMD 2:2006)

Contactors and motor-starters.

A.C. semiconductor motor

controllers and starters


PEL/17/2

EN 60947-5-8:2006

(IEC 60947-5-8:2006)


switching elements. Three-position

enabling switches

PEL/17/2

EN 61000:-


(EMC)

EN 61000-4-12:2006

(IEC 61000-4-12:2006)


techniques. Ring wave immunity

test

GEL/210/12

EN 61033:2006

(IEC 61033:1991/A1:2006)

Test methods for the determination

of bond strength of impregnating

agents to an enamelled wire

substrate

GEL/15/3/7

EN 61061:-

Insulating materials.

Non-impregnated densified

laminated wood for electrical

purposes

EN 61061-1:2006

(IEC 61061-1:2006)

Definitions, designation and


GEL/15/3/6

EN 61076:-


equipment. Product requirements

EN 61076-3-106:2006

(IEC 61076-3-106:2006)

Rectangular connectors. Detail

specification for protective

housings for use with 8-way

shielded and unshielded

connectors for industrial

environments incorporating the IEC

60603-7 series interface

EPL/48

EN 61163:-

Reliability stress screening


EN 61163-1:2006

(IEC 61163-1:2006)

Repairable items manufactured in

lots

DS/1

EN 61212:-

Industrial rigid round laminated

tubes and rods based on

thermosetting resins for electrical

purposes

EN 61212-2:2006

(IEC 61212-2:2006)

Methods of test

GEL/15/3/6

EN 61241:-

Electrical apparatus for use in the

presence of combustible dust

EN 61241-0:2006

(IEC 61241-0:2004

MODIFIED/CORR:2005)General requirements

GEL/31/20

EN 61241-1:2006

(IEC 61241-1:2004)

Protection by enclosures "tD"

GEL/31/20

EN 61300:-




EN 61300-2:-

Tests

EN 61300-2-16:2006

(IEC 61300-2-16:2006)

Mould growth

GEL/86/2

EN 61300-2-38:2006

(IEC 61300-2-38:2006)

Sealing for pressurized fibre optic

devices

GEL/86/2

EN 61326:-

Electrical equipment for

measurement, control and

laboratory use. EMC requirements

EN 61326-2-4:2006

(IEC 61326-2-4:2006)

Particular requirements. Test

configurations, operational

conditions and performance criteria

for insulation monitoring devices,

according to IEC 61557-8 and for

equipment for insulation fault

location according to IEC 61557-9

GEL/65/1

EN 61338:-

Waveguide type dielectric

resonators

EN 61338-1-4:-

(IEC 61338-1-4:2005)

General information and test

conditions. Measurement method

of complex relative permittivity for

dielectric resonator materials at

millimetre-wave frequency


EPL/49

EN 61672:-

Electroacoustics. Sound level

meters

EN 61672-3:2006

(IEC 61672-3:2006)

Periodic tests

EPL/29

EN 61755:-

Fibre optic connector optical

interfaces

EN 61755-1:-

(IEC 61755-1:2005)

Optical interfaces for single mode

non-dispersion shifted fibres.

General and guidance


GEL/86/2

EN 61788:-

Superconductivity

EN 61788-7:2006

(IEC 61788-7:2006)

Electronic characteristic

measurements. Surface resistance

of superconductors at microwave

frequencies

L/-/90

EN 62132:-

Integrated circuits. Measurement of

electromagnetic immunity, 150 kHz

to 1 GHz

EN 62132-1:-

(IEC 62132-1:2006/CORR 2006)

General conditions and definitions


EPL/47

EN 62217:-

(IEC 62217:2005)

Polymeric insulators for indoor and

outdoor use with a nominal voltage

> 1 000 V. General definitions, test

methods and acceptance criteria


PEL/36

EN 62271:-


controlgear

EN 62271-100:-

(IEC 62271-100:2001/A2:2006)

High-voltage alternating-current

circuit-breakers


PEL/17/1


EN 62271-109:2006

(IEC 62271-109:2006)

Alternating- current series

capacitor by-pass switches

PEL/17/1

EN 62290:-

Railway applications. Urban guided

transport management and

command/control systems

EN 62290-1:2006

(IEC 62290-1:2006)

System principles and fundamental

concepts

GEL/9

EN 62308:2006

(IEC 62308:2006)

Reliability assessment and

durability analysis

DS/1

EN 62329:-

Heat shrinkable moulded shapes

EN 62329-1:-

(IEC 62329-1:2005)

Definitions and general

requirements


GEL/15/3/5

EN 62343:-

Dynamic modules

EN 62343-1-3:2006

(IEC 62343-1-3:2006)

Performance standards. Dynamic

gain tilt equaliser with pigtails for

use in controlled environment

(category C)

GEL/86/3

EN 175301:-

Detail specification

EN 175301-801:2006

High density rectangular

connectors, round removable

crimp contacts

EPL/48

CENELEC TECHNICAL

SPECIFICATIONSCLC/TS 61111:2006

(IEC

61111:1992/CORR:2000/A1:2002)

Matting of insulating material for

electrical purposes

PEL/78

CLC/TS 61112:2006

(IEC

61112:1992/CORR:2000/A1:2002)

Blankets of insulating material for

electrical purposes

PEL/78

ETSI (EUROPEAN

TELECOMMUNICATIONS

STANDARDS INSTITUTE)

EUROPEAN PUBLICATIONSEN 300 162:-

Electromagnetic compatibility and

radio spectrum matters (ERM).

Radiotelephone transmitters and

receivers for the maritime mobile

service operating in VHF bands

EN 300 162-2: December 2006

(Version 1.2.1)

Harmonized EN covering essential

requirements of article 3.2 of the

R&TTE directive

EN 300 162-3: December 2006

(Version 1.2.1)

Harmonized EN covering essential

requirements of article 3.3 (e) of

the R&TTE directive

EN 301 925: December 2006

(Version 1.2.1)



Radiotelephone transmitters and

receivers for the maritime mobile

service operating in VHF bands.

Technical characteristics and

methods of measurement

EN 302 842:-



VHF air-ground and air-air digital

link (VDL) mode 4 radio

equipment. Technical

characteristics and methods of

measurement for aeronautical

mobile (airborne) equipment

EN 302 842-1: December 2006

(Version 1.2.1)

Physical layer

EN 302 842-2: December 2006

(Version 1.2.1)

General description and data link

layer

EN 302 842-3: December 2006

(Version 1.2.1)

Additional broadcast aspects

EN 302 842-4: December 2006

(Version 1.2.1)

Point-to-point functions

OTHER ETSI (EUROPEAN

TELECOMMUNICATIONS

STANDARDS INSTITUTE)

PUBLICATIONSEG 202 416: December 2006

(Version 1.1.2)

Human factors (HF). User

interfaces. Setup procedure design

guidelines for mobile terminals and

services

of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

EG 202 417: December 2006

(Version 1.1.2)

Human factors (HF). User

education guidelines for mobile

terminals and services

EG 202 549: December 2006

(Version 1.1.1)

Telecommunications and internet

converged services and protocols

for advanced networking

(TISPAN). Design guide.

Application of security

countermeasures to service

capabilities

ES 201 915:-

Open service access (OSA).

Application programming interface

(API)

ES 201 915-1: December 2006

(Version 1.6.1)

Overview (Parlay 3)

ES 201 915-2: December 2006

(Version 1.6.1)

Common data definitions (Parlay 3)

ES 201 915-4: December 2006

(Version 1.6.1)

Call control SCF (Parlay 3)

ES 201 915-5: December 2006

(Version 1.6.1)

User interaction SCF (Parlay 3)

ES 201 915-6: December 2006

(Version 1.5.1)

Mobility SCF (Parlay 3)

ES 201 915-8: December 2006

(Version 1.6.1)

Data session control SCF (Parlay

3)

ES 201 915-11: December 2006

(Version 1.6.1)

Account management SCF (Parlay

3)

ES 201 915-12: December 2006

(Version 1.6.1)

Charging SCF (Parlay 3)

ES 202 391:-


Parlay X web services

ES 202 391-1: December 2006

(Version 1.2.1)

Common (Parlay X 2)

ES 202 391-2: December 2006

(Version 1.2.1)

Third party call (Parlay X 2)

ES 202 391-3: December 2006

(Version 1.2.1)

Call notification (Parlay X 2)

ES 202 391-4: December 2006

(Version 1.2.1)

Short messaging (Parlay X 2)

ES 202 391-5: December 2006

(Version 1.2.1)

Multimedia messaging (Parlay X 2)

ES 202 391-6: December 2006

(Version 1.2.1)

Payment (Parlay X 2)

ES 202 391-7: December 2006

(Version 1.2.1)

Account management (Parlay X 2)

ES 202 391-8: December 2006

(Version 1.2.1)

Terminal status (Parlay X 2)

ES 202 391-9: December 2006

(Version 1.2.1)

Terminal location (Parlay X 2)

ES 202 391-10: December 2006

(Version 1.2.1)

Call handling (Parlay X 2)

ES 202 391-11: December 2006

(Version 1.2.1)

Audio call (Parlay X 2)

ES 202 391-12: December 2006

(Version 1.2.1)

Multimedia conference (Parlay X 2)

ES 202 391-13: December 2006

(Version 1.2.1)

Address list management (Parlay X

2)

ES 202 391-14: December 2006

(Version 1.2.1)

Presence (Parlay X 2)

ES 202 915:-


Application programming interface

(API)

ES 202 915-1: December 2006

(Version 1.4.1)

Overview (Parlay 4)

ES 202 915-2: December 2006

(Version 1.4.1)

Common data definitions (Parlay 4)

ES 202 915-3: December 2006

(Version 1.4.1)

Framework (Parlay 4)

ES 202 915-4:-

Call control


ES 202 915-4-1: December 2006

(Version 1.4.1)

Call control common definitions

(Parlay 4)

ES 202 915-4-2: December 2006

(Version 1.4.1)

Generic call control SCF (Parlay 4)

ES 202 915-4-3: December 2006

(Version 1.4.1)

Multi-party call control SCF (Parlay

4)

ES 202 915-4-4: December 2006

(Version 1.4.1)

Multi-media call control SCF

(Parlay 4)

ES 202 915-4-5: December 2006

(Version 1.4.1)

Conference call control SCF

(Parlay 4)

ES 202 915-5: December 2006

(Version 1.4.1)

User interaction SCF (Parlay 4)

ES 202 915-6: December 2006

(Version 1.4.1)

Mobility SCF (Parlay 4)

ES 202 915-7: December 2006

(Version 1.4.1)

Terminal capabilities SCF (Parlay

4)

ES 202 915-8: December 2006

(Version 1.4.1)

Data session control SCF (Parlay

4)

ES 202 915-9: December 2006

(Version 1.3.1)

Generic messaging SCF (Parlay 4)

ES 202 915-10: December 2006

(Version 1.4.1)

Connectivity manager SCF (Parlay

4)

ES 202 915-11: December 2006

(Version 1.4.1)

Account management SCF (Parlay

4)

ES 202 915-12: December 2006

(Version 1.4.1)

Charging SCF (Parlay 4)

ES 202 915-13: December 2006

(Version 1.3.1)

Policy management SCF (Parlay 4)

SR 002 564: December 2006

(Version 1.1.1)

Applicability of existing ETSI and

ETSI/3GPP deliverables to eHealth

TR 102 505: December 2006

(Version 1.1.1)

Speech processing, transmission

and quality aspects (STQ).

Development of a reference web

page


(Version 1.1.1)

Terrestrial trunked radio (TETRA).

Feasibility study into the

implications of operating public

safety sector (PSS) TEDS using

the proposed "tuning range"

concept in the 410 MHz to 430

MHz and 450 MHz to 470 MHz

frequency bands


(Version 1.1.1)



Short range devices (SRD).

Equipment for detecting

movement. Radio equipment

operating in the frequency range

17,1 GHz to 17,3 GHz. System

reference document for ground

based synthetic aperture radar

(GBSAR)

TR 102 648:-

Speech processing, transmission

and quality aspects (STQ). Test

methodologies for ETSI test events

and results. Test methodologies for

ETSI test events

TR 102 648-1: December 2006

(Version 1.1.1)

VoIP speech quality testing


(Version 6.6.0)

Universal mobile

telecommunications system

(UMTS). Security aspects of early

IP multimedia subsystem (IMS)

(3GPP TR 33.978 version 6.6.0

release 6)

TS 101 456: December 2006

(Version 1.4.2)

Electronic signatures and

infrastructures (ESI). Policy

requirements for certification

authorities issuing qualified

certificates


(Version 1.2.3)

Electronic signatures and

infrastructures (ESI). Policy

requirements for certification

authorities issuing public key

certificates


TS 102 165:-




(TISPAN). Methods and protocols

TS 102 165-1: December 2006

(Version 4.2.1)

Method and proforma for threat,

risk, vulnerability analysis


(Version 1.3.1)

Services for computer supported

telecommunications applications

(CSTA) phase III (ISO/IEC

18051:2000 Modified)


(Version 1.3.1)

XML protocol for computer

supported telecommunications

applications (CSTA) phase III

(ISO/IEC DIS 18056 Modified)


(Version 1.2.1)

Emergency communications

(EMTEL). Requirements for

communications from

authorities/organizations to

individuals, groups or the general

public during emergencies

TS 102 232:-

Lawful interception (LI). Handover

interface and service-specific

details (SSD) for IP delivery

TS 102 232-1: December 2006

(Version 2.1.1)

Handover specification for IP

delivery

TS 102 232-2: December 2006

(Version 2.1.1)

Service-specific details for E-mail

services

TS 102 232-3: December 2006

(Version 2.1.1)

Service-specific details for internet

access services

TS 102 232-4: December 2006

(Version 2.1.1)

Service-specific details for layer 2

services

TS 102 232-6: December 2006

(Version 2.1.1)

Service-specific details for

PSTN/ISDN services

TS 102 361:-



Digital mobile radio (DMR) systems

TS 102 361-1: December 2006

(Version 1.4.1)

DMR air interface (AI) protocol

TS 102 385:-

Broadband radio access networks

(BRAN). HiperMAN. Conformance

testing for WiMAX/HiperMAN 1.2.1

TS 102 385-1: December 2006

(Version 2.3.1)

Protocol implementation

conformance statement (PICS)

proforma

TS 102 385-2: December 2006

(Version 2.3.1)

Test suite structure and test

purposes (TSS&TP)

TS 102 385-3: December 2006

(Version 2.3.1)

Abstract test suite (ATS)


(Version 1.1.1)

Satellite earth stations and

systems (SES). Broadband

satellite multimedia (BSM). QoS

functional architecture


(Version 1.1.1)


systems (SES). Broadband

satellite multimedia (BSM).

General security architecture


(Version 1.2.1)

Digital video broadcasting (DVB).

IP datacast over DVB-H: content

delivery protocols

TS 102 551:-


systems (SES). Satellite digital

radio (SDR) systems. Inner

physical layer of the radio interface

TS 102 551-1: December 2006

(Version 1.1.1)

Single carrier transmission

TS 102 551-2: December 2006

(Version 1.1.1)

Multiple carrier transmission


(Version 1.1.1)

Methods for testing and

specification (MTS). Internet

protocol testing (IPT): IPv6

security. Requirements catalogue


(Version 1.1.1)

Methods for testing and

specification (MTS). Internet

protocol testing (IPT): IPv6

mobility. Requirements catalogue



(Version 7.8.0)

Universal mobile


(UMTS). Service aspects. Service

principles (3GPP TS 22.101

version 7.8.0 release 7)


(Version 7.5.0)

Universal mobile


(UMTS). Requirements on 3GPP

system to wireless local area

network (WLAN) interworking

(3GPP TS 22.234 version 7.5.0

release 7)


(Version 3.17.0)

Digital cellular telecommunications

system (phase 2+). Universal

mobile telecommunications system

(UMTS). General packet radio

service (GPRS). Service

description. Stage 2 (3GPP TS

23.060 version 3.17.0 release

1999)


(Version 4.11.0)


release 4)


(Version 5.13.0)


release 5)


(Version 6.15.0)


release 6)


(Version 6.8.0)

Universal mobile


(UMTS). Bootstrapping interface

(Ub) and network application

function interface (Ua). Protocol

details (3GPP TS 24.109 version

6.8.0 release 6)


(Version 6.7.0)




(UMTS). Messaging using the IP

multimedia (IM) core network (CN)

subsystem. Stage 3 (3GPP TS

24.247 version 6.7.0 release 6)


(Version 5.12.0)

Universal mobile


(UMTS). UTRA repeater radio

transmission and reception (3GPP

TS 25.106 version 5.12.0 release

5)


(Version 6.6.0)


release 6)


(Version 7.2.0)


release 7)


(Version 7.5.0)

Universal mobile


(UMTS). Base station and repeater

electromagnetic compatibility

(EMC) (3GPP TS 25.113 version

7.5.0 release 7)


(Version 5.12.0)

Universal mobile


(UMTS). UTRA repeater

conformance testing (3GPP TS



(Version 6.6.0)


release 6)


(Version 7.2.0)


release 7)


(Version 6.11.0)

Universal mobile


(UMTS). Physical layer procedures

(FDD) (3GPP TS 25.214 version

6.11.0 release 6)


(Version 7.3.0)


release 7)


(Version 6.9.0)

Universal mobile


(UMTS). UTRAN overall

description (3GPP TS 25.401



(Version 7.2.0)


release 7)



(Version 7.2.0)

Universal mobile


(UMTS). UTRAN Iub Interface:

general aspects and principles


release 7)


(Version 7.1.0)

Universal mobile


(UMTS). UTRAN Iub interface data

transport and transport signalling

for common transport channel data

streams (3GPP TS 25.434 version

7.1.0 release 7)


(Version 7.3.0)

Universal mobile


(UMTS). UTRAN Iub interface user

plane protocols for common

transport channel data streams


release 7)


(Version 7.1.0)

Universal mobile


(UMTS). UTRAN Iupc interface

general aspects and principles


release 7)


(Version 7.3.0)

Universal mobile


(UMTS). UTRAN Iuant interface:

layer 1 (3GPP TS 25.461 version

7.3.0 release 7)


(Version 6.4.0)

Universal mobile



signalling transport (3GPP TS



(Version 7.4.0)

Universal mobile



remote electrical tilting (RET)

antennas application part (RETAP)

signalling (3GPP TS 25.463



(Version 6.16.0)

Universal mobile


(UMTS). Characteristics of the

universal subscriber identity

module (USIM) application (3GPP


6)


(Version 7.7.0)


release 7)

TS 131 121: November 2006

(Version 6.6.0)

Universal mobile


(UMTS). UICC-terminal interface.

Universal subscriber identity

module (USIM) application test

specification (3GPP TS 31.121



(Version 6.3.0)

Universal mobile


(UMTS). Universal subscriber

identity module (USIM)

conformance test specification


release 6)

TS 131 124: November 2006

(Version 6.7.0)

Universal mobile


(UMTS). Mobile equipment (ME)

conformance test specification.

Universal subscriber interface

module application toolkit (USAT)

conformance test specification


release 6)


(Version 7.1.0)

Universal mobile


(UMTS). 3G security. Security

architecture (3GPP TS 33.102



(Version 7.4.0)




(UMTS). 3G security. Access

security for IP-based services


release 7)


(Version 7.2.0)




(UMTS). 3G security. Network

domain security (NDS). IP network

layer security (3GPP TS 33.210




(Version 6.11.0)




(UMTS). Generic authentication

architecture (GAA). Generic

bootstrapping architecture (3GPP


6)


(Version 7.6.0)


release 7)


(Version 6.9.0)

Universal mobile


(UMTS). 3G security. Security of

multimedia broadcast/multicast

service (MBMS) (3GPP TS 33.246


TS 134 229:-

Universal mobile


(UMTS). Internet protocol (IP)

multimedia call control protocol

based on session initiation protocol

(SIP) and session description

protocol (SDP)

TS 134 229-1: December 2006

(Version 5.2.0)

Protocol conformance specification

(3GPP TS 34.229-1 version 5.2.0

release 5)

TS 134 229-2: December 2006

(Version 5.2.0)

Implementation conformance

statement (ICS) specification

(3GPP TS 34.229-2 version 5.2.0

release 5)

TS 134 229-2: December 2006

(Version 6.0.0)

(3GPP TS 34.229-2 version 6.0.0

release 6)


(Version 6.7.0)


system (phase 2+). Technical

specifications and technical reports

for a GERAN-based 3GPP system


release 6)


(Version 4.3.0)


system (phase 2+).

Security-related network functions


release 4)


(Version 6.10.0)


system (phase 2+). Multimedia

broadcast/multicast service

(MBMS) in the GERAN. Stage 2


release 6)


(Version 6.8.0)


system (phase 2+). Generic

access to the A/Gb interface.

Stage 2 (3GPP TS 43.318 version

6.8.0 release 6)


(Version 6.5.0)


system (phase 2+). Mobile station -

base stations system (MS - BSS)

interface data link (DL) layer

specification (3GPP TS 44.006



(Version 6.20.0)


system (phase 2+). Mobile radio

interface layer 3 specification.

Radio resource control (RRC)

protocol (3GPP TS 44.018 version

6.20.0 release 6)


(Version 5.14.0)


system (phase 2+). General packet

radio service (GPRS). Base station

system (BSS) - serving GPRS

support node (SGSN). BSS GPRS

protocol (BSSGP) (3GPP TS



(Version 6.16.0)


release 6)

TS 151 010:-


system (phase 2+). Mobile station

(MS) conformance specification

TS 151 010-2: December 2006

(Version 7.4.0)

Protocol implementation

conformance statement (PICS)

proforma specification (3GPP TS

51.010-2 version 7.4.0 release 7)

TS 151 010-4: November 2006

(Version 4.3.0)

Subscriber identity module (SIM)

application toolkit conformance test

specification (3GPP TS 51.010-4



TS 151 010-5: December 2006

(Version 7.4.0)

Inter-radio-access-technology

(RAT) (GERAN / UTRAN)

interaction abstract test suite (ATS)

(3GPP TS 51.010-5 version 7.4.0

release 7)


(Version 1.1.1)




(TISPAN). NGN lawful interception.

Lawful interception functional

entities, information flow and

reference points

IEC PUBLICATIONS

IEC 60027:-

Letter symbols to be used in

electrical technology

IEC 60027-4:2006

(Edition 2)


£68.80 members, £71.67

non-membersSS/7

IEC 60027-6:2006

Control technology

£46.40 members, £48.33

non-membersSS/7

IEC/TS 60034:-


IEC/TS 60034-27:2006

Off-line partial discharge off-line

measurements on the stator

winding insulation of rotating

electrical machines

£131.20 members, £136.67

non-membersPEL/2

IEC 60050:-

International electrotechnical

vocabulary

IEC 60050-351:2006

(Edition 3)

Control technology

£192.00 members, £200.00

non-membersGEL/65

IEC 60079:-

Explosive atmospheres

IEC 60079-19:2006

(Edition 2)

Equipment repair, overhaul and

reclamation

£131.20 members, £136.67


IEC 60086:-

Primary batteries

IEC 60086-1:2006

(Edition 10)

General

£116.80 members, £121.67

non-membersCPL/35

IEC 60086-2:2006

(Edition 11)

Physical and electrical

specifications

£131.20 members, £136.67

non-membersCPL/35

IEC 60095:-

Lead-acid starter batteries

IEC 60095-1:2006

(Edition 7)

General requirements and test

methods

£84.80 members, £88.33

non-membersPEL/21

IEC 60118:-

Electroacoustics. Hearing aids

IEC 60118-4:2006

(Edition 2)

Induction loop systems for hearing

aid purposes. Magnetic field

strength

£116.80 members, £121.67

non-membersEPL/29

IEC 60155:-

Glow-starters for fluorescent lamps


£17.60 members, £18.33

non-membersCPL/34/1

IEC 60269:-

Low-voltage fuses

IEC 60269-1:2006

(Edition 4)


£168.00 members, £175.00

non-membersPEL/32

IEC 60269-2:2006

(Edition 3)

Supplementary requirements for

fuses for use by authorised

persons (fuses mainly for industrial

application). Examples of

standardized systems of fuses A to

I

£193.60 members, £201.67

non-membersPEL/32

of 71IEC PUBLICATIONS

IEC 60269-3:2006

(Edition 3)


fuses for use by unskilled persons

(fuses mainly for household or

similar application). Examples of

standardized systems of fuses A to

F

£192.00 members, £200.00

non-membersPEL/32

IEC 60269-4:2006

(Edition 4)


fuse-links for the protection of

semiconductor devices

£131.20 members, £136.67

non-membersPEL/32

IEC 60287:-

Electric cables. Calculation of the

current rating

IEC 60287-1-1:2006

(Edition 2)

Current rating equations (100 %

load factor) and calculation of

losses. General

£92.80 members, £96.67


IEC 60317:-

Specifications for particular types

of winding wires

IEC 60317-0:-


IEC 60317-0-5:2006

(Edition 2)

Glass-fibre braided resin or varnish


rectangular copper wire

£68.80 members, £71.67

non-membersGEL/55

IEC 60317-0-6:-

Glass-fibre wound resin or varnish


round copper wire


£17.60 members, £18.33

non-membersGEL/55

IEC 60335:-


appliances. Safety

IEC 60335-2-35:-


instantaneous water heaters


£17.60 members, £18.33

non-membersCPL/61/07

IEC 60384:-

Fixed capacitors for use in

electronic equipment

IEC 60384-3:2006

(Edition 3)

Sectional specification: surface

mount fixed tantalum electrolytic

capacitors with manganese dioxide

solid electrolyte

£84.80 members, £88.33

non-membersEPL/40X

IEC 60384-3-1:2006

(Edition 2)

Blank detail specification: surface

mount fixed tantalum electrolytic

capacitors with manganese dioxide

solid electrolyte. Assessment level

EZ

£46.40 members, £48.33

non-membersEPL/40X

IEC/TS 60479:-

Effects of current on human beings

and livestock

IEC/TS 60479-1:-

General aspects

CORRIGENDUM 1:October 2006

JPEL/64

IEC 60601:-

Medical electrical equipment

IEC 60601-1:-

General requirements for basic

safety and essential performance


CH/62/1

IEC 60601-1-6:2006

(Edition 2)

General requirements for basic

safety and essential performance.

Collateral standard: usability

£155.20 members, £161.67

non-membersCH/62/1

IEC/TR 60728:-

Cable networks for television

signals, sound signals and

interactive services

IEC/TR 60728-6-1:2006

System guidelines for analogue

optical transmission systems

£116.80 members, £121.67

non-membersEPL/100

IEC 60825:-

Safety of laser products

IEC 60825-2:-

Safety of optical fibre

communication systems


£35.20 members, £36.67

non-membersEPL/76


IEC/TR 60825-8:2006

(Edition 2)

Guidelines for the safe use of laser

beams on humans

£100.80 members, £105.00

non-membersEPL/76

IEC 60874:-

Connectors for optical fibres and

cables

IEC 60874-1:2006

(Edition 5)

General specification

£84.80 members, £88.33

non-membersGEL/86/2

IEC 60874-1-1:2006

(Edition 2)

Blank detail specification

£38.40 members, £40.00

non-membersGEL/86/2

IEC 60915:2006

(Edition 2)

Fixed capacitors for use in

electronic equipment. Preferred

dimensions of shaft ends, bushes

and for the mounting of single hole,

bush-mounted, shaft-operated

electronic components

£51.20 members, £53.33

non-membersEPL/40X

IEC 60938:-

Fixed inductors for electromagnetic

interference suppression

IEC 60938-2:-

Sectional specification


£41.60 members, £43.33

non-membersEPL/40X

IEC 60947:-


controlgear

IEC 60947-4-2:-

Contactors and motor-starters.

A.C. semiconductor motor

controllers and starters


£92.80 members, £96.67

non-membersPEL/17/2

IEC 60947-5-9:2006


switching elements. Flow rate

switches

£92.80 members, £96.67

non-membersPEL/17/2

IEC 61000:-


(EMC)

IEC/TR 61000-2-14:2006

Environment. Overvoltages on

pubic electricity distribution

networks

£116.80 members, £121.67


IEC 61000-4:-


techniques

IEC 61000-4-1:2006

(Edition 3)

Overview of IEC 61000-4 series

£51.20 members, £53.33


IEC 61000-4-18:2006

Damped oscillatory wave immunity

test

£100.80 members, £105.00


IEC 61000-4-20:-

Emission and immunity testing in

transverse electromagnetic (TEM)

waveguides


£17.60 members, £18.33


IEC 61025:2006

(Edition 2)

Fault tree analysis (FTA)

£131.20 members, £136.67

non-membersDS/1

IEC 61061:-

Non-impregnated densified

laminated wood for electrical

purposes

IEC 61061-1:2006

(Edition 3)

Definitions, designation and


£25.60 members, £26.67


IEC 61161:2006

(Edition 2)

Ultrasonics. Power measurement.

Radiation force balances and

performance requirements

£116.80 members, £121.67

non-membersEPL/87

IEC 61169:-

Radio-frequency connectors


IEC 61169-16:2006

Sectional specification. RF coaxial

connectors with inner diameter of

outer conductor 7 mm (0,276 in)

with screw coupling.

Characteristics impedance 50

ohms (75 Ohms) (type N)

£92.80 members, £96.67

non-membersEPL/46/2

IEC 61223:-

Evaluation and routine testing in

medical imaging departments

IEC 61223-2-6:2006

(Edition 2)

Constancy tests. Imaging

performance of computed

tomography X-ray equipment

£92.80 members, £96.67

non-membersCH/62/2

IEC/TR 61282:-

Fibre optic communication system

design guides

IEC/TR 61282-3:2006

(Edition 3)

Calculation of link polarization

mode dispersion

£92.80 members, £96.67

non-membersGEL/86/3

IEC/TR 61282-8:2006

Calculating dispersion penalty from

measured time-resolved chirp data

£64.00 members, £66.67

non-membersGEL/86/3

IEC 61300:-




IEC 61300-2:-

Tests

IEC 61300-2-26:2006

(Edition 2)

Salt mist

£35.20 members, £36.67

non-membersGEL/86/2

IEC 61300-2-37:2006

(Edition 2)

Cable bending for fibre optic

closures

£32.00 members, £33.33

non-membersGEL/86/2

IEC 61300-3:-

Examinations and measurements

IEC 61300-3-10:2006

(Edition 2)

Gauge retention force

£20.80 members, £21.67

non-membersGEL/86/2

IEC 61300-3-14:2006

(Edition 2)

Accuracy and repeatability of the

attenuation settings of a variable

attenuator

£38.40 members, £40.00

non-membersGEL/86/2

IEC 61300-3-15:2006

(Edition 2)

Dome eccentricity of a convex

polished ferrule endface

£35.20 members, £36.67

non-membersGEL/86/2

IEC 61300-3-24:2006

(Edition 2)

Keying accuracy of optical

connectors for polarization

maintaining fibre

£38.40 members, £40.00

non-membersGEL/86/2

IEC 61340:-

Electrostatics

IEC 61340-3:-

Methods for simulation of

electrostatic effects

IEC 61340-3-1:2006

(Edition 2)

Human body model (HBM)

electrostatic discharge waveforms

£38.40 members, £40.00

non-membersGEL/101

IEC 61340-3-2:2006

(Edition 2)

Machine model (MM) electrostatic

discharge test waveforms

£35.20 members, £36.67

non-membersGEL/101

IEC 61400:-

Wind turbines

IEC 61400-25:-

Communications for monitoring

and control of wind power plants

IEC 61400-25-1:2006

Overall description of principles

and models

£92.80 members, £96.67

non-membersPEL/88

IEC 61400-25-2:2006

Information models

£168.00 members, £175.00

non-membersPEL/88

IEC 61400-25-3:2006

Information exchange models

£92.80 members, £96.67

non-membersPEL/88


IEC 61400-25-5:2006

Conformance testing

£116.80 members, £121.67

non-membersPEL/88

IEC 61672:-

Electroacoustics. Sound level

meters

IEC 61672-3:2006

Periodic tests

£56.00 members, £58.33

non-membersEPL/29

IEC 61753:-


and passive components

performance standard

IEC 61753-101-3:2006

Fibre management systems for

category U. Uncontrolled

environment

£76.80 members, £80.00

non-membersGEL/86/2

IEC 61788:-

Superconductivity

IEC 61788-2:2006

(Edition 2)

Critical current measurement. DC

critical current of Nb3Sn composite

superconductors

£100.80 members, £105.00

non-membersL/-/90

IEC 61788-7:2006

(Edition 2)

Electronic characteristic

measurements. Surface resistance

of superconductors at microwave

frequencies

£92.80 members, £96.67

non-membersL/-/90

IEC/TR 61804:-

Function blocks (FB) for process

control

IEC/TR 61804-4:2006

EDD interoperability guideline

£131.20 members, £136.67

non-membersAMT/7

IEC 61937:-

Digital audio. Interface for

non-linear PCM encoded audio

bitstreams applying IEC 60958

IEC 61937-8:2006

Non-linear PCM bitstreams

according to the windows media

audio (WMA) professional format

£41.60 members, £43.33

non-membersEPL/100

IEC/TR 61948:-

Nuclear medicine instrumentation.

Routine tests

IEC/TR 61948-4:2006

Radionuclide calibrators

£20.80 members, £21.67

non-membersCH/62/3

IEC 61987:-

Industrial-process measurement

and control. Data structures and

elements in process equipment

catalogues

IEC 61987-1:2006

Measuring equipment with

analogue and digital output

£116.80 members, £121.67

non-membersGEL/65/2

IEC/TS 62045:-

Multimedia security. Guideline for

privacy protection of equipment

and systems in and out of use

IEC/TS 62045-1:2006

General

£51.20 members, £53.33

non-membersEPL/100

IEC 62056:-

Electricity metering. Data

exchange for meter reading, tariff

and load control

IEC 62056-46:-

Data link layer using HDLC

protocol


£27.20 members, £28.33

non-membersPEL/13

IEC 62056-47:2006

COSEM transport layers for IPv4

networks

£100.80 members, £105.00

non-membersPEL/13

IEC 62056-53:2006

(Edition 2)

COSEM application layer

£192.00 members, £200.00

non-membersPEL/13

IEC 62153:-

Metallic communication cable test

methods

IEC 62153-4-8:2006


(EMC). Capacitive coupling

admittance

£35.20 members, £36.67

non-membersEPL/46


IEC 62257:-

Recommendation for small

renewable energy and hybrid

systems for rural electrification

IEC 62257-7-1:2006

Generators. Photovoltaic arrays

£168.00 members, £175.00

non-membersGEL/82

IEC 62271:-


controlgear

IEC 62271-300:2006

Seismic qualification of alternating

current circuit-breakers

£76.80 members, £80.00

non-membersPEL/17/1

IEC 62337:2006

Commissioning of electrical,

instrumentation and control

systems in the process industry.

Specific phases and milestones

£84.80 members, £88.33

non-membersGEL/65

IEC 62339:-

Modular component interfaces for

surface-mount fluid distribution

components

IEC 62339-1:2006

Elastomeric seals

£27.20 members, £28.33

non-membersGEL/65/4

IEC 62343:-

Dynamic modules

IEC 62343-1-3:2006

Performance standards. Dynamic

gain tilt equalizer with pigtails for

use in controlled environments

(category C)

£41.60 members, £43.33

non-membersGEL/86/3

IEC 62347:2006

Guidance on system dependability

specifications

£92.80 members, £96.67

non-membersDS/1

IEC/TR 62350:2006

Guide on the correct use of

residual current-operated

protective devices (RCDs) for

household and similar use

£84.80 members, £88.33

non-membersPEL/23/1

IEC 62382:2006

Electrical and instrumentation loop

check

£64.00 members, £66.67

non-membersGEL/65

IEC 62392:2006

Suitability of typical electrical

insulating material (EIM) for

polymer recycling

£64.00 members, £66.67

non-membersGEL/15

IEC/TS 62441:2006

Accidentally caused candle flame

ignition for audio/video,

communication and information

technology equipment

£32.00 members, £33.33

non-membersEPL/108

IEC/TR 62461:2006

Radiation protection

instrumentation. Determination of

uncertainty in measurement

£116.80 members, £121.67

non-membersNCE/2

IEC CISPR 15:-

Limits and methods of

measurement of radio disturbance

characteristics of electrical lighting

and similar equipment


£32.00 members, £33.33


IEC/PAS PUBLICATIONS

IEC/PAS 62500:2006

Process management for avionics.

Guide for defining and performing

highly accelerated tests in avionic

systems

£92.80 members, £96.67

non-membersGEL/107

ISO PUBLICATIONS

ISO 180:-

Plastics. Determination of Izod

impact strength


£12.80 members, £13.33

non-membersPRI/21

ISO 839:-

Milling machine arbors with 7/24

tapers

ISO 839-1:2006

(Edition 2)

Dimensions

£35.20 members, £36.67

non-membersMTE/5

of 71ISO PUBLICATIONS

ISO 845:2006

(Edition 3)

Cellular plastics and rubbers.

Determination of apparent density

£30.40 members, £31.67

non-membersPRI/72

ISO 1017:2006

(Edition 3)

Brown coals and lignites.

Determination of acetone- soluble

material (resinous substances) in

the benzene-soluble extract

£30.40 members, £31.67

non-membersPTI/16

ISO 1522:2006

(Edition 3)

Paints and varnishes. Pendulum

damping test

£46.40 members, £48.33

non-membersSTI/10

ISO 1739:2006

(Edition 2)

Butter. Determination of the

refractive index of the fat

(reference method)

£30.40 members, £31.67

non-membersAW/5

ISO 2692:2006

(Edition 2)

Technical drawings. Geometrical

tolerancing. Maximum material

requirement, minimum material

requirement, reciprocity

requirement

£86.40 members, £90.00

non-membersTDW/4

ISO 2780:2006

(Edition 3)

Milling cutters with tenon drive.

Interchangeability dimensions for

cutter arbors. Metric series

£35.20 members, £36.67

non-membersMTE/5

ISO 3842:2006

(Edition 4)

Road vehicles. Fifth wheels.

Interchangeability

£40.00 members, £41.67

non-membersAUE/13

ISO 3889:2006

(Edition 2)

Milk and milk products.

Specification of Mojonnier-type fat

extraction flasks

£35.20 members, £36.67

non-membersAW/5

ISO 4568:2006

(Edition 3)

Shipbuilding. Sea-going vessels.

Windlasses and anchor capstans

£46.40 members, £48.33

non-membersSME/32/4

ISO 4869:-


ISO 4869-2:-

Estimation of effective A-weighted

sound pressure levels when

hearing protectors are worn


PH/7

ISO 5418:-

Iron ores. Determination of copper

content

ISO 5418-1:2006

(Edition 2)

2,2'-biquinolyl spectrophotometric

method

£51.20 members, £53.33

non-membersISE/58

ISO 5418-2:2006


spectrophotometric method

£51.20 members, £53.33

non-membersISE/58

ISO 5659:-

Plastics. Smoke generation

ISO 5659-2:2006

(Edition 2)

Determination of optical density by

a single-chamber test

£94.40 members, £98.33

non-membersPRI/26

ISO 5667:-

Water quality. Sampling

ISO 5667-1:2006

(Edition 2)

Guidance on sampling

programmes and techniques

£86.40 members, £90.00

non-membersEH/3/6

ISO 6070:-

Auxiliary tables for vibration

generators. Methods of describing

equipment characteristics


GME/21

ISO 6993:-

Buried, high-impact poly(vinyl

chloride) (PVC-HI) piping systems

for the supply of gaseous fuels


ISO 6993-2:2006

Fittings at a maximum operating

pressure of 200 mbar (20 kPa)

£64.00 members, £66.67


ISO 7500:-

Metallic materials. Verification of

static uniaxial testing machines

ISO 7500-2:2006

(Edition 2)

Tension creep testing machines.

Verification of the force applied

£64.00 members, £66.67

non-membersISE/NFE/4/1

ISO 8510:-

Adhesives. Peel test for a

flexible-bonded-to-rigid test

specimen assembly

ISO 8510-2:2006

(Edition 2)

180$0D peel

£35.20 members, £36.67

non-membersPRI/52

ISO/IEC 8802:-


Telecommunications and

information exchange between

systems. Local and metropolitan

area networks. Specific

requirements

ISO/IEC 8802-11:-

Wireless LAN medium access

control (MAC) and physical layer

(PHY) specifications. Amendment

6: Medium access


£160.00 members, £166.67

non-membersIST/6

ISO/IEC 8824:-

Information technology. Abstract

syntax notation one (ASN.1)

ISO/IEC 8824-1:-

Specification of basic notation


£94.40 members, £98.33

non-membersIST/6

ISO/IEC 8824-2:-

Information object specification


IST/6

ISO/IEC 8825:-

Encoding rules

ISO/IEC 8825-3:-

Specification of encoding control

notation (ECN)


£12.80 members, £13.33

non-membersIST/6

ISO/IEC 8825-4:-

Information technology. ASN.1

encoding rules: XML encoding

rules (XER)


£12.80 members, £13.33

non-membersIST/6

ISO 8873:-


Spray-applied polyurethane foam

ISO 8873-1:2006

Material specifications

£46.40 members, £48.33

non-membersPRI/72

ISO 9096:-

Stationary source emissions.

Manual determination of mass

concentration of particulate matter


EH/2/1

ISO 9682:-

Iron ores. Determination of

manganese content

ISO 9682-2:2006

Periodate spectrophotometric

method

£56.00 members, £58.33

non-membersISE/58

ISO 9683:-

Iron ores. Determination of

vanadium content

ISO 9683-1:2006

BPHA spectrophotometric method

£51.20 members, £53.33

non-membersISE/58

ISO 9816:2006

(Edition 2)

Passenger cars. Power-off reaction

of a vehicle in a turn. Open-loop

test method

£73.60 members, £76.67

non-membersAUE/15

ISO 10303:-

Industrial automation systems and

integration. Product data

representation and exchange

ISO 10303-112:2006

Integrated application resource:

modelling commands for the

exchange of procedurally

represented 2D CAD models

£124.80 members, £130.00

non-membersAMT/4


ISO 10303-503:-

Application interpreted construct:

geometrically bounded 2D

wireframe


AMT/4

ISO 10535:2006

(Edition 2)

Hoists for the transfer of disabled

persons. Requirements and test

methods

£110.40 members, £115.00

non-membersCH/173/-/6

ISO 10813:-

Vibration generating machines.

Guidance for selection

ISO 10813-1:-

Equipment for environmental

testing


GME/21/2

ISO 11535:2006

(Edition 2)

Iron ores. Determination of various

elements. Inductively coupled

plasma atomic emission

spectrometric method

£76.80 members, £80.00

non-membersISE/58

ISO 11565:2006

(Edition 2)

Road vehicles. Spark plugs. Test

methods and requirements

£46.40 members, £48.33

non-membersMCE/9

ISO 11898:-

Road vehicles. Controller area

network (CAN)

ISO 11898-3:-

Low-speed, fault-tolerant,

medium-dependent interface


AUE/16

ISO 11962:-

Micrographics. Image mark (blip)

used with 16 mm and 35mm roll

microfilm


IDT/1/2

ISO 13041:-

Test conditions for numerically

controlled turning machines and

turning centres

ISO 13041-5:2006

Accuracy of feeds, speeds and

interpolations

£46.40 members, £48.33

non-membersMTE/1

ISO 13584:-


integration. Parts library

ISO 13584-511:2006

Mechanical systems and

components for general use.

Reference dictionary for fasteners

£168.00 members, £175.00

non-membersAMT/4

ISO 13994:-

Clothing for protection against

liquid chemicals. Determination of

the resistance of protective clothing

materials to penetration by liquids

under pressure

CORRIGENDUM 1:October 2006

PH/3/3

ISO 14224:2006

(Edition 2)


natural gas industries. Collection

and exchange of reliability and

maintenance data for equipment

£160.00 members, £166.67

non-membersPSE/17

ISO 14229:2006

(Edition 2)

Road vehicles. Unified diagnostic

services (UDS). Specification and

requirements

£198.40 members, £206.67

non-membersAUE/16

ISO/IEC 14496:-

Information technology. Coding of

audio-visual objects

ISO/IEC 14496-16:2006

(Edition 2)

Animation framework extension

(AFX)

£168.00 members, £175.00

non-membersIST/37

ISO 14505:-

Ergonomics of the thermal

environment. Thermal environment

in vehicles

ISO 14505-2:2006

Determination of equivalent

temperature

£76.80 members, £80.00

non-membersPH/9/1

ISO 14890:-

Conveyor belts. Specification for

rubber or plastics covered

conveyor belts of textile

construction for general use


PRI/67


ISO 15071:-

Hexagon bolts with flange. Small

series. Product grade A


FME/9/3

ISO 15072:-

Hexagon bolts with flange with

metric fine pitch thread. Small

series. Product grade A


FME/9/3

ISO/IEC 15444:-

Information technology. JPEG

2000 image coding system

ISO/IEC 15444-9:-

Interactivity tools, APIs and

protocols


£12.80 members, £13.33

non-membersIST/37

ISO 15662:2006

Intelligent transport systems. Wide

area communication. Protocol

management information

£89.60 members, £93.33

non-membersEPL/278

ISO/IEC 15693:-

Identification cards. Contactless

integrated circuit cards. Vicinity

cards

ISO/IEC 15693-2:2006

(Edition 2)

Air interface and initialization

£12.80 members, £13.33

non-membersIST/17

ISO 15901:-

Pore size distribution and porosity

of solid materials by mercury

porosimetry and gas adsorption

ISO 15901-2:2006

Analysis of mesopores and

macropores by gas adsorption

£86.40 members, £90.00

non-membersLBI/37

ISO 16100:-


integration. Manufacturing software

capability profiling for

interoperability

ISO 16100-4:2006

Conformance test methods, criteria

and reports

£86.40 members, £90.00

non-membersAMT/5

ISO 16234:2006

Heavy commercial vehicles and

buses. Straight ahead braking on

surfaces with split coefficient of

friction. Open test method

£60.80 members, £63.33

non-membersAUE/15

ISO 16792:2006

Technical product documentation

(TPD). Digital product definition,

data practices

£134.40 members, £140.00

non-members

TDW/4

ISO/IEC 17345:2006

(Edition 2)

Information technology. Data

interchange on 130 mm rewritable

and write once read many ultra

density optical (UDO) disk

cartridges. Capacity: 30 Gbytes

per cartridge. First generation

£160.00 members, £166.67

non-membersICT/-/1

ISO 17775:2006

Aircraft. Ground service

connections. Potable water,

toilet-flush water and toilet drain

£30.40 members, £31.67

non-membersACE/69

ISO/TR 18124:2006

Plastics piping systems. Multilayer

M (metal) pipes. Test method for

strength of the weld line in the

metal layer and bonding between

layers by use of a cone

£35.20 members, £36.67

non-membersPRI/88/4

ISO 18909:-

Photography. Processed

photographic colour films and

paper prints. Methods for

measuring image stability


CPW/42

ISO 19092:-

Financial services. Biometrics

ISO 19092-1:2006

Security framework

£134.40 members, £140.00

non-membersIST/12

ISO/IEC 19798:2006

Method for the determination of

toner cartridge yield for colour

electrophotographic printers and

multi-function devices that contain

printer components

£64.00 members, £66.67

non-membersIST/3

ISO/IEC 21000:-

Information technology. Multimedia

framework (MPEG-21)


ISO/IEC 21000-6:-

Rights data dictionary. Amendment

1: Digital item identifier relationship

types


£12.80 members, £13.33

non-membersIST/37

ISO/IEC 21000-10:-

Digital item processing.

Amendment 1: Additional C++

bindings


£12.80 members, £13.33

non-membersIST/37

ISO 21078:-

Determination of boron (III) oxide in

refractory products

ISO 21078-2:2006

Acid extraction method for the

determination of boron (III) oxide in

binder components

£46.40 members, £48.33

non-membersRPI/1

ISO 21487:2006

Small craft. Permanently installed

petrol and diesel fuel tanks

£40.00 members, £41.67

non-membersGME/33

ISO 21849:2006

Aircraft and space. Industrial data.

Product identification and

traceability

£110.40 members, £115.00

non-membersACE/1

ISO 22489:2006

Microbeam analysis. Electron

probe microanalysis. Quantitative

point analysis for bulk specimen

using wavelength dispersive X-ray

spectroscopy

£56.00 members, £58.33

non-membersCII/9

ISO/IEC 23002:-

Information technology. MPEG

video technologies

ISO/IEC 23002-1:2006

Accuracy requirements for

implementation of integer-output

8x8 inverse discrete cosine

transform

£51.20 members, £53.33

non-membersIST/37

ISO/IEC 23360:-

Linux standard base (LSB) core

specification 3.1

ISO/IEC 23360-1:2006

Generic specification

£233.60 members, £243.33

non-membersIST/5

ISO/IEC 23360-2:2006

Specification for IA32

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 23360-3:2006

Specification for IA64

£134.40 members, £140.00

non-membersIST/5

ISO/IEC 23360-4:2006

Specification for AMD64

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 23360-5:2006

Specification for PPC32

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 23360-6:2006

Specification for PPC64

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 23360-7:2006

Specification for S390

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 23360-8:2006

Specification for S390X

architecture

£124.80 members, £130.00

non-membersIST/5

ISO/IEC 24711:2006

Method for determination of ink

cartridge yield for colour inkjet

printers and multi-function devices

that may contain printer

components

£81.60 members, £85.00

non-membersIST/3

ISO/IEC 24712:2006

Colour test pages for measurement

of office equipment consumable

yield

£81.60 members, £85.00

non-membersIST/3

ISO/IEC 24738:2006

Information technology. Icon

symbols and functions for

multimedia link attributes

£68.80 members, £71.67

non-membersICT/-/1


ISO/IEC 25436:2006

Information technology. Eiffel:

analysis, design and programming

language

£160.00 members, £166.67

non-membersIST/5

ISO/IEC 26300:2006

Information technology. Open

document format for office

applications (open document) v1.0

£241.60 members, £251.67

non-membersIST/41

ISO/IEC/TR 26927:2006


Telecommunications and

information exchange between

systems. Corporate

telecommunication networks.

Mobility for enterprise

communications

£84.80 members, £88.33

non-membersIST/6

ISO/IEC GUIDE 75:2006

Strategic principles for future IEC

and ISO standardization in

industrial automation

£86.40 members, £90.00

non-membersGEL/3

ISO/PAS PUBLICATIONS

ISO/PAS 11154:2006

Road vehicles. Roof load carriers

£134.40 members, £140.00

non-membersAUE/9

of 71ISO/PAS PUBLICATIONS

BRITISH STANDARDS BS 4592-2:2006 BS 5392:-shop.bsigroup.com/upload/Standards &...

Documents

Transcript of BRITISH STANDARDS BS 4592-2:2006 BS 5392:-shop.bsigroup.com/upload/Standards &...