LIQUIDATIONS

PENNSYLVANIA EQUIPMENT INC.P.O. Box 61 • Grove City, PA 16127

Tel: 724-458-6162 • Fax: 724-458-0753

PENNSYLVANIA EQUIPMENT INC.P.O. Box 61 • Grove City, PA 16127

Pre-Sorted StandardPAID

Matteson, ILPermit #114

DIRECTIONS TO PLANTSTERMS & CONDITIONS

METAL MANUFACTURING CO.3232 Calumet AvenueHammond, IN 46320

2 COMPLETE FACILITY CLOSURESLiquidation of Roll Grinding and Machine Shops

Roll GrindersRoll Grinders for RebuildLathesMilling MachinesCranesBalancersMiscellaneous Machine ToolsVehiclesAnd Much More

Liquidation of Roll Grinding and Machine ShopsMETAL MANUFACTURING COMPANY3232 Calumet Avenue • Hammond, IN 46320

Roll GrindersRoll Grinders for RebuildLathesMilling MachinesCranesBalancersMiscellaneous Machine ToolsVehiclesAnd Much More

Please Visit Our Website for More Photos and Complete Details!

www.paequip.comPlease Visit Our Website for More Photos

and Complete Details!www.paequip.com

Visit Our Website: www.paequip.com

PENNSYLVANIA EQUIPMENT, INC. (PEI) : TERMS AND CONDITION OF THE SALE: Any person participating in the liquidation shall be bound by the following terms and conditions. The liquidator does not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any listings specified herein.

Payment is required prior to dismantling and rigging. All payments must be made by cash, certified check, or company check with a bank letter of authorization guaranteeing irrevocable payment to PENNSYL-VANIA EQUIPMENT, INC.

All sales are final, on an “As is”, “Where is”, “In place”, “With all faults” basis with no conditions or warranties, whether expressed, implied, statutory or otherwise, including without limitation, warranties or con-ditions as to title, description, fitness for purpose, quantity, merchant-ability, state conditions, location or otherwise. By purchasing an item, the buyer affirms he has inspected all items before purchase. Buyers shall be deemed to have relied entirely upon their own inspection and investigations.

Each buyer will be subject to any sales tax chargeable by city and/or the state in addition to the lender price for any asset as purchased, unless proper and acceptable evidence of a certificate of exemption is present-ed to PENNSYLVANIA EQUIPMENT, INC. at the time of payment.

Rigging and removal of sold equipment is the sole responsibility of the buyer. Assets purchased must be removed seven days or less after purchase. Rigging and removal may not begin until payment has been made in full. All heavy rigging requiring the use of forklifts, cranes, etc., whether performed by the customer or a rigging company, must present a certificate of insurance for $1,000,000.00 naming PENNSYLVANIA EQUIPMENT, INC. as the insured.

PENNSYLVANIAEQUIPMENT INC.

PENNSYLVANIAEQUIPMENT INC.

• 20/10 Ton Robbins & Meyers Top Running Double Girder Bridge, 2 Speed, 55’ Span, S/N 49738, Service H4, AC, Pendant• 15 Ton Robbins & Meyers Top Running Double Girder Bridge, 2 Speed, 55’ Span, S/N 50311, Service H4, AC, Pendant• 10 Ton Robbins & Meyers Top Running Double Girder Bridge, 2 Speed, 55’ Span, Service H4, AC, Pendant• 15 Ton Robbins & Meyers Top Running Double Girder Bridge, 2 Speed, 55’ Span, Service H4, AC, Pendant, S/N 50875• 30 Ton Demag Top Running double Girder Bridge Crane, 55’ Span, (2) 15 Ton Trolley Hoists, AC, Pendant, Class C• 15 Ton Robbins & Meyers Top Running Double Girder Bridge Crane, 55’ Span, AC, Pendant, Class C, 2 Speed• 15 Ton P&H Top Running Double Girder Bridge Crane, 2 Speed, 55’ Span, Class D, Pendant, AC• 30/15 Ton Whiting Top Running Double Girder Bridge Crane, 55’ Span, AC, Pendant Control, Class H4• 10 Ton Whiting Top Running Double Girder Bridge Crane, 55’Span, S/N 10484 AC, Pendant, Class H4

• Reed Eng. Welding Manipulator, Model GS-2, 12” Dia. x 12’ Travel, S/N 51G722, S/N 51G712, Lincoln Idealarc 3B-500 Welding Power Supply 500 Amp, Lincoln NA-5 Auto DC Arc Welding Control, Flux Hopper with VS Drive • Ransome Size 13 Welding Positioner, S/N 4502, 3000 Lb. Cap., 12” in Eccentric, 12” above Table, 41” x 41” Slotted Table • Lincoln Idealarc 400 Amp., Model No. R3R-400 DC arc welder w/Lincoln High Frequency wire feed S/N AC338951, w/Welding Cart and Cables• Webb Tank Turning Drive & Idler Rolls w/Reeves VS AC Drive• Ransome 30,000 Lb. Model No. BDRR Idler Power Turning Roll Set, S/N 3516161 Ransome Idler Roll• Lincoln Ideal Arc Welder, Model R3R-500• Joe Fuller Model #JFRD-10 Variable Speed Driver Turning Rolls with FJRI-10 Idler Rolls, 10,000 Pound Capacity, 12” Dia. x 4.5” w/rubber tires, NEMA 12 controls S/N D10-99014 & 110-99010• (2) Pc. 8’ x 10’ Acorn Tables• (2) Pc. 5’ x 8’ Acorn Tables• Lincoln Invertec V-350 Pro Welder w/Lincoln LN-7 wire feed

• Jensen High Temperature Car Bottom Type Batch Oven 10’ x 10’ x 40’ x 850° F, Natural Gas Fired, Auto Controls, Safety Controls, Purge System, Chart Recorder, Transfer Cart 7’ W x 36’ L and Rail System, New 2000 control 3.5 MTL BTU digital temp control, Honeywell Temp. recorder, Jones SAF car roll rotat-ing system, S/N 6681, Swing Doors, Side Entry Doors

AIR COMPRESSORS• Sullair Air Compressor, Model 12BS-50L, 29,769 • Devil Biss Pro Air Compressor, 6.5 HP, 80 Gal., w/200 gal. holding tank• 5 HP Air Compressor, S/N 990322539• Trane 25 Ton Chiller Unit, S/N U94A00347

DRILL PRESS• Barnes 24” Single Spindle Box Column Drill 18” x 28” Table, S/N 9014Mdl. D-3000, Dayton Vise

TRAILERS & TRUCKS• 1980 International S-Diesel TA Flat Bed Truck, 5 speed, 210 HP Transmis-sion, 20 Foot Bed with Undermount Tool Box, (Transmission Rebuilt 1997), 368,375 miles

MISC. EQUIPMENT• Doall Automatic Horizontal Band Saw, Model C-4A, 5’ Roller Table, 4’ Table out S/N 280-7014 (1970)• Vacublast Vacuum and Sandblast Units, (3) Model No. A2, S/N 2259, Model A3, and (1) Pressure Washer S/N H201450491• Clark Model No. EC500-70B, 5000 Lb. Electric Fork Lift Truck, S/N B685-0103-4556F4A-8-80, Triple Mast, 147” Lift Height. Solid Tires, Safety Cage• VacuBlast Machine, Model No. Senior A4, Portable Dust Collector with Hop-per and Filter, Model 16BS-75H-ACAC• Dewalt Radial Saw, 3HP, Model GA S/N 296995• Yale 6000 Lb. Fork Truck• Marley Cooling Tower Unit, S/N 47150, (Not Installed) Cooling Water Pump Skid for Marley Cooling Tower• Transfer car w/track, 4’ 1⁄2” Gauge, 5’6” x 10’ area, 30’ track• Electric Powered Transfer Car, 5’6” x 10’ area, 100’ track• ASC-20 Ton Lifting Beam, 2 Hooks

MEASURING EQUIPMENT• Roll Caliper System, Promic with PLC Pro-Mill Plus Control with HP Color Pro Plotter, 16” x 64” Size, S/N 4009• Roll Caliper System, 2.5 Promic, 8” – 32” Size, S/N 3504

CRANES MISCELLANEOUS

FURNACES

15 Ton R&M

2 COMPLETE FACILITY CLOSURES

ROLL SERVICE INC.19421 Forest Ave. • Glenwood, IL 60425

#1 -#2 -

#1- METAL MANUFACTURING CO.FROM DOWNTOWN CHICAGO: I-90 E / I-94 E. Keep Left To Take I-90 Express E / I-94 Ex-press E / Dan Ryan Exp E Toward 51st St. Merge Onto I-90 E / I-94 E / Dan Ryan Expy E Toward Exit 59a / Indiana Toll Rd. Keep Right To Take I-90 E Via Exit 59a Toward Indiana Toll Rd (Portions Toll) (Crossing Into Indiana). Merge Onto In-912 S / Cline Ave Via Exit 3. Take The Calumet Ave. / Us-41 Exit. Turn Left Onto Us-41 / S Calumet Ave. End at 3232 S Calumet Ave., Hammond, In 46320-1117

#2 - ROLL SERVICE INC.FROM O’HARE AIRPORT TO:Exit Airport to I-294 South (Tollway to Indiana), exit South on Halsted Street (Rt. 1). Continue South (2 3/4 miles) on Halsted Street to Holbrook Road. Turn left (East on Holbrook Road to Chicago Heights-Glenwood Road. Turn right (South on Chicago Heights-Glenwood Road to 194th Street. Turn left (East) on 194th Street to Forest Ave. Turn right (South) on Forest Ave. Truck entrance and visitor parking is on the left. RSI is at the corner of Forest Ave. and 194th. End at 19421 Forest Ave., Glenwood, IL 60425

ROLL SERVICE INC.19421 Forest AvenueGlenwood, IL 60425

#2 - COMPLETE FACILITY CLOSURELiquidation of Roll Grinding and Machine Shop

Reed Ransome

#2 - #1 -

WELDING EQUIP.

PLATING SYSTEMSCHROME PLATING SYSTEM CONSISTING OF:(2) 30’ x 4’ x 7’ Rubber Lined Carbon Steel Plating Tanks(1) 30’ x 5’ x 7’ Rubber Lined Carbon Steel Plating Tank(1) 152’’ x 81’’ x 92’’ Rubber Lined Carbon Steel Plating Tank(1) 193’’ x 114’’ x 92’’ Rubber Lined Carbon Steel Plating Tank(1) 42’ x 8’ x 92’’ Rubber Lined Carbon Steel Plating Tank(1) 84’’ x 84’’ x 96’’ Rubber Lined Carbon Steel Plating Tank(1) 30’ x 3’ x 6’ Rubber Lined Carbon Steel Plating TankComplete With: Integrated agitation system, Rotating fixtures for all plating tanks, Rank and anode support for all plating tanks, Titanium heating and cooling coils, Interconnecting Piping, Fully integrated electrical controls, Copper buss bar assemblies on all tanks, All necessary rectifiers by North American Rectifier, 70,000 CFM Scrub Air Vent Mist Collector System

COPPER PLATING SYSTEM COMPLETE WITH : Plating tank, Rinse tank, Agitation System, Integrated Electronic Control

ROLL GRINDERS

• Farrell 28” x 240” Roll Grinder, Serial # 67A 2162, Complete with Neck Rests, 10 HP/ DC Headstock Motor, 30 HP/ DC Wheel Spindle Motor, 7.5 HP/ DC Carriage Motor, Ladder Type Relay Logic Control• (2) Farrell 60” x 192” Heavy Duty Grinders Serial # 52118 & 52119 Complete with Neck Rests, Concave/ Crown Capacity 15 HP/ DC Headstock Motor, 40 HP/ DC Wheel Spindle Motor, 5 HP Carriage Motor, Ladder Type Relay Logic Controls• Farrell 53” x 192” Roll Grinder Serial # 50111, Complete with Neck Rests, Concave/ Crown Capacity, 15 HP/ DC Headstock Motor, 40 HP/ DC Wheel Spindle Motor, 5 HP/ DC Carriage Motor, Ladder Type Relay Logic Controls• Landis 60” x 210” Heavy Duty Roll Grinder Complete with Neck Rests, 400 Concave/ Crown Capacity 40 HP DC Spindle, Mechanically Rebuilt 1997, Ladder Type Relay, SCR Drive Controls (See Photo)• Farrell 36” x 168” Roll Grinder Complete with Neck Rests, 450 Concave/ Crown-ing Capacity, 40 HP DC Spindle, 7 1⁄2 HP DC Headstock, 5 HP DC Carriage Traverse, Rebuilt 1996, Equipped with Control Techniques, Solid State Drive, and New Enclosures with SBS Wheel Balancer, SCR Drive Controls (See Photo)• Cincinnati 36” x 240” Roll Grinder Complete with Neck Rests, 350 Concave/ Crown, Electrics upgraded to Digital “State of the Art” Controls in 1999, 30/40 HP DC Spindle, 75/10 HP Headstock, 5 HP Carriage Traverse (See Photo)ROLL GRINDERS FOR REBUILD• Landis 36” x 266” Roll Grinder Complete with Concave and Convex Crowning 10 HP/ DC Headstock Motor, 40 HP Wheel Spindle Motor, 5 HP/ SC Carriage Motor with Neck Rests, Ladder Type Relay Logic Controls• Landis 36” x 192” Serial No. 16809 Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC, Wheel Spindle, 15 HP DC Headstock, 5 HP DC Carriage, Ladder Type, Relay Logic Controls

• Landis 36” x 192” Serial No. 17621 Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC Wheel Spindle, 15 HP DC Headstock, 5 HP DC Carriage, Ladder Type, Relay Logic Controls - *One Carriage Missing• Landis 36” x 192” Serial No. 17712 Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC Wheel Spindle, 15 HP DC Headstock, 5 HP DC Carriage, Ladder Type, Relay Logic Controls• Landis 36” x 192” Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC Wheel Spindle, 15 HP DC Headstock, 5 HP DC Carriage, Ladder Type Relay Logic Controls• Landis 36” x 192” Serial No. 367-1 Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC Wheel Spindle, 15 HP DC Headstock, 5 HP DC Carriage, Ladder Type, Relay Logic Controls• Landis 28” x 168” Serial No. 16648 Traveling Table Roll Grinder Complete with Neck Rests, .080 Concave/ Crowning Capacity, 40 HP Wheel Spindle, 10 HP DC Headstock, 5 HP DC Table, Ladder Type, Relay Logic Controls• Landis 28” x 168” Serial No. 325-4 Traveling Table Roll Grinder Complete with Neck Rests, .080 Concave/ Crowning Capacity, 40 HP DC Wheel Spindle, 10 HP Headstock, 5 HP DC Table, Ladder Type, Relay Logic Controls• Cincinnati 28” x 192” Traveling Table Roll Grinder Complete with Neck Rests, .080 Concave/ Crown Capacity, 40 HP DC Wheel Spindle, 15 HP Headstock, 5 HP Table, No Electric Controls• Farrell 60” x 400” Serial No. K-1626 Roll Grinder Complete with Neck Rests and Special Taper Carriage, No Crowning Attachment, OHDC Wheel Spindle, 20 HP DC Headstock, 5 HP Carriage, Ladder Type, Relay Logic

• Heylingenstaedt 22” x 216” Type 450 EA/ 4500 Lathe Serial # 188507, 12” Swing Over Cross Slide, 11/20 KW, Threading• Swift 60”/ 87” x 204” Gap Bed Roll Turning Lathe Complete with 60” Diameter 4 Jaw Chuck Steady Rests Cross Slide and Tailstock 65 HP Spindle Drive Motor (See Photo)• Gisholt 40” x 480” Engine Lathe Serial No. 646OX4 Complete with Hydraulic Steady Rests, Tracer Control Centers, 4 Jaw Chuck and DC Controls, 75 HP (See Photo)• Clausing Colchester 17” x 60” 1968 Geared Head Engine Lathe Complete with Taper Attachment Steady Rest, 4 Way Tool Post, 3 and 4 Jaw Chucks, Quick Change Col-lect Set and 65-1600 RPM AC Motor Drive (See Photo)• Monarch 16” x 30” Geared Head Engine Lathe Serial # 6968, AC Motor Drive• Leblond 17” x 60” Geared Head Engine Lathe Serial No. MD800 Complete with Taper Attachment, 4 Chuck and AC Motor Drive• Poreba 48” x 32’ Engine Lathe, TypeTCA-125, Serial No. 114-130, Meter Bed, Steady Rest, 4 Jaw Chuck, 40 KW (See Photo)

LATHES• Gidding & Lewis Type 300T Serial No. 100-100-60 (1960) 3” Table Type Horizontal boring Mill 36” x 72” T-Slot Table and Two Axis Digital Readouts AC Motor Drive, Tail Stock• Bridgeport Model BR Milling Machine Serial No. 13229, 1969, 1 1⁄2 HP, Dovetail Ram Type Variable Speed, Vertical, Com-plete with 8” x 42” T Slot Table, AC Motor Drive (See Photo)• Gray Planer Mill Serial No. 8166; Total Length of Bed 84’ 6”; Length of Bed 42’ 8”; Work Area of Table 68”; Horizontal Distance Through housing 73”; Vertical Distance Through Housing 60”; Total Width of Housing and Motor 18”; GE 75 HP, 250, 750, 1200 Speeds• Kearney and Trecker Model 2H Vertical Knee Milling Machine Serial No. 1-8325• Misalzrn 12” x 42” Model 2 RN Milling Machine Complete with T-Slot Table, Over Arm Support, and 21-1500 RPM AC Motor Drive, Universal Head

• 5 Ton P&H Double Leg Gantry Crane, 40’ Span, A.C., Pendant (See Photo)• 15 Ton P&H Top Running Double Girder Overhead Bridge Crane, 96’ Span, Serial No. CH22893, A.C., Radio/Pendant, Class “D” (See Photo)• 25 Ton P&H Top Running Double Girder Overhead Bridge Crane, 96’ Span, Serial No. CH22749, A.C., Radio/Pendent, Class “D” • 18 Ton Grove Hydraulic Truck Crane, Model RT58, GM Diesel, Hours 8,788 (See Photo)• Mijack (Drott) 800R, Serial No. 6211699, Container Crane with Handler, 671 Detroit Diesel Power

CRANES

• Entek IRD Balancer, Model 9800, Serial No. 10312412, 7500 lb. Capacity(See Photo)• Entek IRD Balancer, Model 20610, Serial No. 14518886, 300 lb. Capacity• Entek IRD Balancer, Model 7600, Serial No. 29118115, 15,000 lb. Capacity• IRD Balancer, Model 290, Computer Control for all Three IRD Balancer (See Photo)• Hoffman Balancing Machine 25,000 lbs., Model HM271, Serial No. 84064, 30” x 300”

MISCELLANEOUS EQUIPMENTHYDRAULIC PULLERS/PRESSES• Model TB-1 Hydraulic Puller Complete with Stand, Arms, and All Hydraulics, 12” Stroke• Dake Model 75 HE Hydraulic Press, 75 Ton Serial No. 128794, 14” Stroke• Enerpak 50 Ton Hydraulic Puller Model HP575G Complete with Attachments and Various Pancake Jacks 10 – 50 Ton

AIR COMPRESSOR• Binks Model # 33-4069 ARI Compressor, Serial No. 30-469, 480 Volt• Ingersol Rand, Type 30 Model 25, Serial No. 30T-34-38-36, 25 HP

DRILL PRESS• American 4’ Arm 11” Column Hole Wizard Radial Arm Drill Press With Compound Drill Table, T Slot, AC Motors, Serial No. 67124• Power Matic Model 1150 Spindle Floor Drill Complete with 300 – 4800 RPM Variable Speed 2 HP AC Motor Drive

FILTERS• Filter Tanks Metal Manufacturing, Inc. Complete with Two Stage Chain Drive Drag-Out Systems, Electric Motors and Pumps• Filter Tank Metal Manufacturing, Inc. Complete with Two Stage Chain Driven Drag-Out Systems, Dolpak 2 Stage Magnetic Separator System, Electric Motor and Pumps

BALANCERS

MISCELLANEOUS EQUIPMENT• Perishable Tooling, Part Washers, Storage Cabinets, Bolt Bins, Tool Holders, Slings, Hand Tools, Hand Grinder, Bench Grinder, Various Welding Machines and Drum Racks• Wellsaw Band Saw, Model 1000, Serial No. 2475, 11’ 6” Blade Length, 3⁄4” Blade, Manual Clamp• Promie System II Electronic Saddle Profiling Micrometer Complete• Dake Model 1 1⁄2 Arvon Press Complete with Stand• Trico Shot Blaster Model 60 x 24 SL, with Dust Collector• DoAll Granite Table 6’ x 12’ x 18” Complete with Stand• Cincinnati Model 2A Tool Grinder

MISCELLANEOUS LOT:• Miscellaneous C-Micrometers Ranging from 1” to 48” which Include 62 Micrometers and Suitable Standards for Calculation and Use MISCELLANEOUS SPARE PART INVENTORY:• 15 Ea. Spindles and Bearings• 50 Ea. DC Motors 5 HP-40 HP DC• 25 Sets Leveling Jacks• 10 Sets Bearing Blocks• 6 Sets Neck Rests• Various Gearing and Internal Parts, like pulleys, shafts, etc.• Various Gibb Blocks

TRAILERS & TRUCK• 18 Ton Hydraulic Grove Truck Crane, Model RT58, GM Diesel (See Photo)• (4) Box trailers, 42’ - 50’, - 1 Refrigerated• 1999 GMC C6500 Flatbed Truck

PENNSYLVANIA EQUIPMENT INC. CALL TODAY TO SET UP YOUR INSPECTION 724-458-6162

#1 - COMPLETE FACILITY CLOSURELiquidation of Roll Grinding and Machine Shop

METAL MANUFACTURING COMPANY3232 Calumet Avenue • Hammond, IN 46320

Please Visit Our Website for More Photos

and Complete Details!www.paequip.com

MILLING MACHINES

CINCINNATIFARRELLANDIS

POREBA

CLAUSING

SWIFT

GISHOLT

BRIDGEPORT

ENTEK IRD

5 TON P&H 15 TON P&H

GROVE TRUCK CRANE

#2 - ROLL SERVICE INC.19421 Forest Ave. • Glenwood, IL 60425

• 28” x 192” Cincinnati Roll Grinder, Convex and Concave Crowning, S/N 49519T1, Mdl. OM, Flow-Con Paper Filter & Magnetic Filtration System

• 54”/70” x 460” Poreba Gap Bed Lathe , Model 135B, 6.3-630 RPM including (1) Motorized carriage, (2) Heavy Duty Steady Rests, (2) Taper Turning Attachments, (2) Power Compounds for Taper Turning, (2) 4-Jaw Chucks, (2) Roller Type Steady Rests, (1) Grinding Attachment, Chip Pan, S/N 1139-482• 48”/60” x 384” Poreba Gap Bed Lathe, Model 115B2.8M, Motorized carriage, S/N 7402-01-05005-02 Power Compound, 4 Jaw Chuck, 6.5-630 RPM, Inch/Metric Threading, S/N 7402-01-05005-02• 62”/76” x 19’ AS Fredrikshad Heavy Duty Roll Turning Lathe, 4 Jaw Chuck, S/N 224B14G1, (4) Spindle speeds from 20 to 160 RPM, Steady Rests, Supfinn 21240 6 Head, Super Finishing Attachment with A3B Motorized Compound (6) Cylinder Superfinishing Attachment, Model SC40• 40”/13’ Niles Heavy Duty Engine Lathe, (9) Spindle Speeds from 3.94 to 232 RPM, S/N 121785, 4-Jaw Chuck with Supfinn Type 130 HD Roll Grinding Super Finishing Attachment• 30”/12’ Standard Processing Corporation Roll Turning Lathe, No. 72, • 48”/15’ Standard Processing Corporation Roll Turning Lathe, No. 72, Digital Controls, Model 1106-1115 • 66”/15’ Putnam Heavy Duty Roll Turning Lathe, (9) Spindle Speed from 1.78 to 107 RPM, S/N M3-A3, VS Drive on Cross Slide• 78”/32’ Wickes Heavy Duty Roll Turning Lathe, (8) Spindle Speeds from 3 to 76.4 RPM, (3) Steady Rests, (1) Follower Rest, Motorized Carriage, Rymam 4” Belt Polishing Atmt. S/N 6812-1Q • 26”/40 American Pacemaker Engine Lathe, S/N 74724-55, SS 15-1,000 RPM, 18” 4-Jaw Chuck• 28”/38” x 176” Sigma TS Trencin Gap Bed Engine Lathe, SN 71, S/N 071400790713, Inch/Metric Threading, SS 10-1,000 RPM, 2 7/16 Spdl, Dia., Steady Rests

CincinnatiChurchill

48/60” x 384” Poreba

Landis

54/70” x 460” Poreba

• Index Model No. 55 Vertical Milling Machine, 9” x 42” Table Size, S/N 5836, Milling Vise• Ram Rambudi M53, Hor/Vert. Mill, S/N 96345, 500 RPM on Hor., 12 x 51 Table with DRO, Vert., 500 RPM • 4” Cincinnati Gilbert CNC Horizontal Boring Mill Floor Type, S/N 4C-190, 4” Spdl. Dia., New Enhanced Automation CNC Control in 2004, 3-Axis w/Pendant, 78-1/2 x 78-1/2 Slotted Rotary Table, #50 Spdl. Taper, 72” Vertical Travel of Headstock, 240” Column Travel, 24” Cross Column Travel, SS-7-1510 RPM

See Page 5 For More Machine Tools & Roll Related Equipment!

LATHES

ROLL GRINDERS

MILLING MACHINES

• 60” x 34’ Churchill Traversing Roll Grinder, Model TWR, S/N 23224, w/DC Drives, Rectifier, (4) Steady Rests, (3) Follower Rests, Full Crowning, Digital Readouts Digital Dynamic Balance Control with low-Con Paper Filter & Magnetic System w/Link Conveyor & Trough

• 36” x 216” Landis Roll Grinder, Steady Rosts, DC Motorized Drives, Rectifier, Pendant Pedestal Control, Digital Readout on Head, S/N 24991, with Flow-Con Paper Filter & Magnetic Filtration System Mdl

Cincinnati