Linn Intersekt Info

2
Modular and expandable signal distribution component – all sources in the main audio system can be simultaneously distributed to any room Capable of distributing 16 audio sources to up to 128 rooms and sub-zones Local amplification and short speaker cable runs combined with CAT-5 cabling and line-level distribution ensure unrivalled sound performance Fully compatible with Linn’s KNEKT KIVOR music library RS232 interface allows control of KNEKT system via intelligent touch screens Simple upgrade from KNEKT Line Driver / Receiver system or INTERSEKT R4S5 to INTERSEKT R8S8 or above using the same wiring configuration Flexible system architecture offers the widest range of system solutions which integrate seamlessly with third party products and automation Rack mountable KEY FEATURES INCLUDE The KNEKT INTERSEKT distribution component is designed to address more complex and demanding multi-room audio applications and offers complete freedom of choice of audio source in any part of the home. Each remote room has direct control over all the main room system sources via a Linn Room Control Unit (RCU) or third party control device and individual rooms can be allocated specific main system sources. The modular and expandable nature of the INTERSEKT allows the user to begin with an R4S5 system that distributes 5 audio sources to 4 rooms or an R8S8 system that distributes 8 audio sources to up to 8 rooms and expand it when required. For larger installations, the R4S5 and R8S8 are replaced by a combination of INTERSEKT SES8 source expansion boxes and RER16 room expansion boxes to permit distribution of 16 sources to up to 128 zones and sub- zones, each with the same pitch accurate sound quality that Linn customers demand. RS232 connectivity enables control of the KNEKT system via third party control touchscreen devices and also configuration and set up of KNEKT via Linnstall PC utility, providing the benefit of customising each installation to the precise requirements of the user. The KNEKT INTERSEKT forms the heart of a high performance multi-room audio system for homes, superyachts, hotels and commercial applications. KNEKT INTERSEKT SPECIFICATION Multi-room audio matrix distribution components 1 KNEKT INTERSEKT R4S5 2 KNEKT INTERSEKT R4S5 3 KNEKT INTERSEKT R8S8, SILVER 4 INTERSEKT R8S8 5 INTERSEKT RER16 6 INTERSEKT SES8 3 4 5 6 1 2 Intersekt_InfSht_16_8_GB 16.08.2004 13:41 Uhr Seite 1

Transcript of Linn Intersekt Info

Page 1: Linn Intersekt Info

❙ Modular and expandable signal distributioncomponent – all sources in the main audio system canbe simultaneously distributed to any room

❙ Capable of distributing 16 audio sources to up to128 rooms and sub-zones

❙ Local amplification and short speaker cable runs combined with CAT-5 cabling and line-level distribution ensure unrivalled sound performance

❙ Fully compatible with Linn’s KNEKT KIVOR music library

❙ RS232 interface allows control of KNEKT system viaintelligent touch screens

❙ Simple upgrade from KNEKT Line Driver / Receiver systemor INTERSEKT R4S5 to INTERSEKT R8S8 or above using the same wiring configuration

❙ Flexible system architecture offers the widest range of system solutions which integrate seamlessly with third party products and automation

❙ Rack mountable

KEY FEATURES INCLUDE

The KNEKT INTERSEKT distribution component

is designed to address more complex and demanding

multi-room audio applications and offers complete

freedom of choice of audio source in any part of the

home. Each remote room has direct control over all the

main room system sources via a Linn Room Control

Unit (RCU) or third party control device and individual

rooms can be allocated specific main system sources.

The modular and expandable nature of the INTERSEKTallows the user to begin with an R4S5 system thatdistributes 5 audio sources to 4 rooms or an R8S8system that distributes 8 audio sources to up to 8rooms and expand it when required. For largerinstallations, the R4S5 and R8S8 are replaced by acombination of INTERSEKT SES8 source expansionboxes and RER16 room expansion boxes to permitdistribution of 16 sources to up to 128 zones and sub-zones, each with the same pitch accurate sound qualitythat Linn customers demand.

RS232 connectivity enables control of the KNEKTsystem via third party control touchscreen devices andalso configuration and set up of KNEKT via LinnstallPC utility, providing the benefit of customising eachinstallation to the precise requirements of the user.

The KNEKT INTERSEKT forms the heart of a highperformance multi-room audio system for homes,superyachts, hotels and commercial applications.

KNEKT INTERSEKTSPECIFICATION

Multi-room audio matrix distribution components

1 KNEKT INTERSEKT R4S52 KNEKT INTERSEKT R4S53 KNEKT INTERSEKT R8S8, SILVER4 INTERSEKT R8S85 INTERSEKT RER166 INTERSEKT SES8

3

4

5

6

1

2

Intersekt_InfSht_16_8_GB 16.08.2004 13:41 Uhr Seite 1

Page 2: Linn Intersekt Info

INTERSEKT R4S5

❙ Date of Introduction August 2004❙ Product Type Multi-room audio matrix distribution

component❙ Input Connectors 5 pairs RCA phono source inputs,

1 x RJ11 processor upload port❙ Maximum Input level 2 V rms❙ Output Connectors 4 x RJ45, balanced audio and communications

1 pair RCA record phono output1 x RJ45 RCU control socket

❙ Remote input/output 5 pairs RCA phono sockets(for use in IR pass-through mode)

❙ Universal Mains Supply 100 - 120 V ~ 50 - 60 Hz❙ Power 220 - 240 V ~ 50 - 60 Hz, 10 W approx.❙ Dimensions (H) 45 mm x (W) 345 mm x (D) 274 mm

(H) 14⁄5 inches x (W) 133⁄5 inches x(D) 104⁄5 inches

❙ Rack height 1 Unit❙ Weight 1.75 kg / 3.85 lbs❙ Part Numbers INTERSEKT R4S5

RAKK-R4S5 (rack mount)1⁄2

KNEKT INTERSEKTTECHNICAL SPECIFICATION

Multi-room audio matrix distribution components

Linn Products LtdGlasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ, Scotland, UK.Telephone: +44 (0) 141 307 7777, Facsimile: +44 (0) 141 644 4262, Helpline: 0500 888909, E-mail: [email protected], Website: www.linn.co.uk

Linn Products Inc8787 Perimeter Park Boulevard, Jacksonville FL 32216, USA.Telephone: +1 (904) 645 5242, Facsimile: +1 (904) 645 7275, Helpline: 888-671-LINN, E-mail: [email protected], Website: www.linninc.com

Linn Deutschland GmbHAlbert-Einstein-Ring 19, 22761 Hamburg, Deutschland.Telephone: +49 (0) 40-890 660-0, Facsimile: +49 (0) 40-890 660-29, E-mail: [email protected], Website: www.linn.co.uk

Linn Records LtdGlasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ, Scotland, UK.Telephone: +44 (0) 141 303 5435, Facsimile: +44 (0) 141 303 5007, Helpline/Mail order: +44 (0) 141 303 5029, E-mail: [email protected],Website: www.linnrecords.com

© 2004, Linn Products Limited. All rights reserved.Linn, the Linn logo, INTERSEKT, KIVOR and KNEKT are trade marks of Linn Products Limited, registered in at least the UK and/or the EU.

Pack 793 (04/08)

The above information is subject to change without prior notice.

INTERSEKT R8S8

❙ Input Connectors 8 pairs RCA phono source inputs1 x RJ11 processor upload port

❙ Maximum Input Level 2 Vrms❙ Output Connectors 8 x RJ45, balanced audio and communications

2 pairs RCA record phono outputs1 x RJ45 RCU control socket

❙ Remote input/output 8 pairs RCA phono sockets(for use in IR pass-through mode)

❙ Interface Connectors 1 x RJ45 accessory port (not used)

INTERSEKT R8S8, INTERSEKT SES8, INTERSEKT RER16

❙ Date of Introduction 1995❙ Product Type Multi-room audio matrix distribution

component❙ Mains Supply 90 -132 V ac / 198 - 264 V ac❙ Power < 40 W❙ Heat Output < 40 W❙ Dimensions (H) 81 mm x (W) 320 mm x (D) 328 mm

(H) 31⁄5 inches x (W) 123⁄5 inches x (D) 127⁄8inches

❙ Space requirement (H) 81 mm x (W) 320 mm x (D) 328 mm(H) 31⁄5 inches x (W) 123⁄5 inches x (D) 127⁄8inches

❙ Rack Height 2U❙ Weight 4.5 kg / 9.9 lbs❙ Part numbers INTERSEKT R8S8

INTERSEKT RER16INTERSEKT SES8INTERSEKT R8S8/SINTERSEKT SES8/SINTERSEKT RER16/SRAKK-19 (available in silver or black)

INTERSEKT RER16

❙ Input Connectors 2 x RJ11 processor upload ports❙ Maximum Input Level 2 Vrms❙ Output Connectors 16 x RJ45, balanced audio and communications

4 pairs RCA record phono outputs2 x RJ45 RCU control sockets

❙ Interface Connectors 6 x IDC20 connectors for connection to SES81 x RJ45 accessory port (not used)

INTERSEKT SES8

❙ Input Connectors 8 pairs RCA phono source inputs❙ Maximum Input Level 2 Vrms❙ Remote input/output 8 pairs RCA phono sockets

(for use in IR pass-through mode)❙ Interface Connectors 3 x IDC20 connectors for connection to RER16

Intersekt_InfSht_16_8_GB 16.08.2004 13:41 Uhr Seite 2