LED FLEX STRIP CONTROLLER DMX

User Manual

Thank you for using the Stairville LED Flex Strip Led Series. For the sake of safety and better operation of this product,

please read this manual carefully before use and operate the Stairville LED Flex Strip Controller DMX

2

1.Introduction Welcome to purchase mini string light controller, which has DMX and Master/Slave mode .It is portable and suitable for all kinds of entertainment places. Mini string light controller mainly has three working modes, manual modulate control mode，built-in programming mode and DMX mode. For your convenient use, please read user manual carefully and follow operational instructions. You can get more information from its features as follows:

DMX-512 control and 4 DMX channels DMX mode, dimmer mode, built-in program RGB brightness can be adjusted from 0 to 255 grade Total brightness is from 0 to 100% Shutter speed is 0.1~10 time/second Full colors fade

2. Safety information It is only for indoors use, and the controller should be put in a dry and well-ventilated

place in case of erosion of moisture and rains which will cause short cut. Do not install the controller nearby hot place in case that temperature of lamp rises

which may cause damage. Do not barrier the exit of ventilation to ensure good ventilation and heat dissipation. The controller should connect with the power which has ground wire and the voltage

of power should be in accordance with rating voltage If fuse was damaged, you should change the same type of fuse. The controller does not have any spare parts and components. When repair it,

please use parts and components that the manufacturer provides. When use it, the ambient temperature should not exceeds 40 ℃ If any problem, please contact with technicians.

3. Installation and setting

Important!Please do not install it nearby cloth or flammable materials. The controller is merely suitable for indoor use.

Multi-function connection methods

3

Input/output three pin/five pin instructionPIN1 GND GROND LINEPIN2 -COLD NEGANAL SINGALPIN3 +HOT POSITIVE SINGAL

4. Panel review

1 2 31� DMX output 2� DMX input 3� Dipswitches

1 2 3 4

1� Grounded 2� Power cord3� Fuse 4� LED output

4

5. Operation setting DMX addressIf switch#2 and switch#3 is on and the other switches are off, the DMX address is 6. (0+2++4+0+0+0+2+1 = 6)Switch 9 =0; Switch 8 = 0; Switch 7 = 0; Switch 6 = 0; Switch 5 =0;Switch 4 = 0;Switch 3 = 4;Switch 2 = 2; Switch 1 = 0.

Operational instructionsswitch

function #1 #2 #3 #4 #5 #6 #7 #8 #9 #10

DMX

Set DMX address Set DMX address from 1~512 by switch#1~9. 1

M/S

Fade 0 0 0

Dimming manually Red brightness Green brightness

Blue brightness 0 0

Built-inprograms

7 colors toggle 0 0 0 Adjust speed 1 0

White strobes 1 0 0 Adjust speed 1 0Blue,green

toggle 0 1 0 Adjust speed 1 0

Red,blue toggle 1 1 0 Adjust speed 1 0

R e p e a t 4 p r o g r a m s a b o v e , e a c h program run 8 times and has 8 steps

X X 1 Adjust speed 1 0

Notes! 1.1 means on and 0 means off . 2. In DMX mode, the 10th switch is on and in M/S mode, the 10th switch is off.3.In M/S mode, the 9th switch on/off means dimming manually/ built-in programs.4.Each light fixture occupies 4 consecutive channels and the details are as follows:

5

Channel function chartCh NO. Function chart

1

The main channel and control strobe speed and total brightness0←→127 128←→255

strobe and its speed is increasing Adjust brightness and brightness is increasing

2 Adjust red brightness3 Adjust green brightness4 Adjust blue brightness

Notes!When Ch1 value is 128,all lights turn off.

6.Technical specification Model :SSDL-6060CVoltage:AC90~264V/50/60HZFuse:250V 1APower:45WMax load:10 meterDimension:L205mm* W145mm* H60mmWeight：1.5 KG

6

all Copyrights by:Musikhaus Thomann

Treppendorf 30GER- 96138 BurgebrachTel.: 0049/9546/9223-0

info@thomann.dewww.thomann.de