leading in its class

2 x 2 USB audio interface with 2 x D-PRE and 192 kHz support

Comprehensive connectivityn 2 balanced analog I/On MIDI I/On Individual headphone out

Best sound qualityn 2 Class-A D-PRE mic preampsn 24 bit / 192 kHz resolutionn Dedicated drivers

For true portabilityn Rugged full metal casingn Ultra-compact sizen USB powered

Learn more at www.steinberg.net/ur22

UR22 | Key FeatUReS

n 24-bit/192 kHz USB 2.0 audio interface

n 2 Class-a D-PRe mic preamps supporting +48 V phantom power

n 2 analog XLR/tRS combo inputs (Hi-Z switch on input 2 for electric guitar), 2 tRS line outputs

n MIDI input and output

n Headphones jack with independent level control

n Zero-latency hardware monitoring with mix balance knob

n USB-powered for mobile recordings

n Rugged full-metal housing

n Cross-platform compatibility with major recording software applications

n Best performance with included Cubase aI music software

The preamp is where sound creation begins in recording, and ultimately determines the quality of your mix. D-PRE uses an inverted Darlington circuit where a total of four transistors per unit are used instead of the typical two. As a result, very low distortion can be maintained regardless of the signal level. The sonic integrity is incomparable in this class of audio interfaces and sets the UR22 apart.

All components on the UR22 are carefully selected and implemented for full resolution of high-end audio of up

to 24-bit/192 kHz. A higher sampling frequency means more samples of the audio source, resulting in better

reproduction of the original sound, contributing to the naturalness of audio image and ambience.

Pure sound wherever inspiration strikes. the UR22 is a tour-tested USB audio and MIDI interface that

highlights two of yamaha’s D-PRe microphone preamps, cutting-edge 24-bit/192kHz converters and

an all-metal housing that is made to last. Powered entirely via USB, the compact 2-in/2-out device

features a high-impedance input for connecting directly to electric or bass guitars plus zero-latency

hardware monitoring for convenient recording. a separate headphones jack with dedicated volume

control, switchable +48V phantom power and the included aI version of Cubase make this interface the

number one choice for part-time producers, mobile musicians and everyone in between.

Steinberg and Cubase are registered trademarks of Steinberg Media Technologies GmbH. All other

product and company names are ™ and/or ® of their respective holders. All rights reserved.

All specifications are subject to change without notice. © 2013 Steinberg Media Technologies GmbH.