Latest Arctic Pipe Freeze Kit

Corporate Office5060 Forni Drive, Suite A2Concord, CA 94520

PipeMan Products, Inc.

Website : https://pipemanproducts.comOffice: (530) 221-3600Fax: (530) 221-3700

Website : https://pipemanproducts.com

Welcome to PipeMan Products, Inc.

https://pipemanproducts.com/


PipeMan Products, Inc. has been offering innovative plumbing products to the PHCC and Water Works World since 2001. We offer unique solutions "That Work" to meet the industry's demand for efficient pipe repair products.

We started the business with our revolutionary Insta-Clamp™ Solder Joint Repair Clamp that has changed the way commercial plumbers and mechanical engineers do business with hospitals, hotels, large building facilities and manufacturing plants. It helped them eliminate shut-downs or to schedule repairs when it was best for the facility.

About PipeMan Products, Inc.





Hot tapping is also known as wet tapping. It is a way to tap into a water line while it is under pressure and add a line, drain the system or add a Thermowell or sensor. You place a hot tap service saddle or sleeve onto the line. You add a valve and test the connection under pressure with a hydrostatic pump. Then you place the hot tap machine onto the value through a water tight packing gland, open the valve and lower the cutter and retention pilot down until it touches the pipe.

What is Hot Tapping?





There were not a lot of inexpensive options for fixing a leaking solder joint without shutting down the system until the Insta-Clamp was born. The Insta-Clamp can fix a 1/2" to 4.00" copper solder joint leak in just a few minutes with its unique step-up NBR Waffle gasket. It allows you to do a permanent or temporary repair in minutes without draining or shutting down the system or using a lot of time and materials.

How do I fix a leak on a copper solder joint without shutting down the line?





Service Saddles

Hot Tap Weld On Fittings





Hole Saws and Pilot Drills

Hot Tap Machines





Question: With so many products to choose from, how do I know which tapping sleeve I need?

Answer: Knowing which tapping sleeve to use can be difficult. If you don’t know which product to buy, please call us Toll Free at 1-877-PIPEMAN (747-3626) and let us help you. To correctly assess which product will meet your needs we need to know several things:

1. Type of Pipe: (carbon steel, PVC, copper, Ductile Iron, C900 ACP and others).2. Correct Pipe O.D.: (some saddles have range and some are exact fit).3. Contents in the Line: (Saddles do offer several types of gaskets for different applications).4. Temperature and Maximum PSI: (water sewer and air/gas lines have different ratings).





Line Stop Saddles and Sleeves

Line Stop Machines





When you can’t stop the flow in a line and need to do a repair without draining the system or causing a long shut down, a line stop works well. Line stopping is similar to hot tapping in that you will be tapping into a live line under pressure. You will then remove the hot tap machine and place a line stop machine onto the valve. A line stop machine has rubber bladders that act like line plugs that will expand after being lowered down into the pipe. Once the flow is stopped, the repair can be performed.

What is Line Stopping?





Repair Clamps

Couplings





Mailing AddressPipeMan Products, Inc.1647 Willow Pass Road, #240Concord, CA 94520

A/R Dept.A/R Office:(925) 439-7975A/R Fax: (925) 432-1871Contact: Denise Hughes





Latest Arctic Pipe Freeze Kit

Business

Transcript of Latest Arctic Pipe Freeze Kit