Latching Solenoid Valves S8310 Series (G3/8, G1/2, G3/4 ......NBR NBR NBR 0,5 0,49 0,51 0,64 Title...
Transcript of Latching Solenoid Valves S8310 Series (G3/8, G1/2, G3/4 ......NBR NBR NBR 0,5 0,49 0,51 0,64 Title...
3/8" 72
1/2"
3/4"
1"
11/4"
11/2"
2"
78
85
160.5
128.5
149
106
112.5
124.5
137
149
32
32
32
32
32
45
45
45
45
45
97.2
98.7
-
-
-
76
76
76
76
76
117.3
123.8
135.8
148.3
160.3
80
97.7 32 45
99.2 32 45
94.8 76
96.2 76
109
110.5
52.5
52.5
72
95
109.7
52.5
52.5
G A B C D E H I K
Dimensions (mm)
Latching Solenoid ValvesS8310 Series (G3/8", G1/2", G3/4", G1", G11/4", G11/2", G2")
www.smstork.com
GENERAL FEATURES• Newdesign• No continious energy required.• Suitable for non-aggressive li9uids (water, light oil (2E) etc ... ), gaseous fluids (air, inert gases etc ... )• Working temperature: -10°C / + 80°C• Not suitable for use with dangerous fluids listed in Group 1• High reliability, quality and performance; long life, corrosion resistance• Wide pressure ratings, range of flow rate and orifice options• Ideal for the automatic control of media in a wide range of applications.• Coils interchangeable• Solenoid valves must be used with filtered fluids.• Solenoid valve can be mounted in any position without affecting operation; vertical with coil upwards preferred.
ELECTRICAL CHARACTERISTICSContinuous Duty : ED %100Coil Insulation Class : H (180°C)Coil Impregnation : Polyester Fiber GlassCoil Encapsulation Material : Fiber Glass Reinforced Ambient Temperature : -10°C, +60°CProtection Degree : IP 65 (EN 60529) with coil duly fitted with the plug connectorElectric Plug Connection : DIN 46340 3-Poles Connector (DIN 43650)Electrical Safety : IEC 335Standard Voltages : For DC 6V, 9V, 12V,24 V Latching (Polarity(+.-). Change(-.+)On request other voltages Voltages Tolerance : DC -5%, +10%Frequency : 50 Hz (60 Hz…)On request; Connector with LED, Specify coil voltage with order
MATERIALS IN CONTACT WITH FLUIDBody : BrassInternal Parts : Stainless Steel, BrassSealing : NBRShading Ring : Copper Seats : BrassCore Tube : Stainless SteelSprings : Stainless SteelOn request; nickel plated bodyOn request; sealing can be FPM (VITON),EPDM
TECHNICAL FEATURESMax. Viscosity : 5°E (~37cST veya mm2/s)Response Time : Opening time : 400 - 1600 ms Closing Time : 1000 - 2000 ms
SEALS FEATURESNBR : -10°C...+80°CEPDM : -10°C...+130°CVİTON : -10°C...+160°CPTFE : -10°C...+180°CRUBY : -10°C...+160°C
NORMALLY CLOSED
2/2 WAY
PİLOT OPERATED
∆P=0,5
CoilsNominalValues
Cold/Hot
Inrush HoldingSurface
Temperature (0C)
Current (A)
C40012VDC18W
C40024VDC18W
C40110VDC18W
C40012VAC15VA
C40024VAC15VA
C40110VAC15VA
C40230VAC15VA
C40230VAC24VA
12VDC 18WCOLDHOT
19,5614,52
COLDHOT
20,8814,64
24VDC 18W
110VDC 18W
12VAC 15VA
24VAC 15VA
110VAC 15VA
230VAC 15VA
230VAC 24VA
COLDHOT
19,9613,56
19,5614,52
20,8814,64
19,96
1,631,21
0,870,61
0,18
20106
25116
2313,56
COLDHOT
23,81-
COLDHOT
25,82-
COLDHOT
30,65-
COLDHOT
31,4-
COLDHOT
45,1-
16,4315,86
15,0213,91
15,1713,96
0,123
1,31,262
0,620,57
115
2579
2281
0,1370,126
15,6414,41
23,9221,62
0,0680,063
0,01540,0154
2480
2580
23100
STANDARDS• Standard tube connection G (BSP) (ISO 228-1) and other tube connections (NPT (ANSI 1.20.3)) are available on request.
• TORK solenoid valves 97/23/EC, are available for pressure equipment directive (PED) and 2006/95/ECC low voltage directive (LVD).
Not: Please look catalogues for more details
S8310 G mm Bar Bar Lt/dk min max kg
Solenoid Vave
Symbol
Valve Type/
Order No
Connection
Size
Orifice
Size
Pressure
min/maxKv
FluidTemperature
0CWeight
S8310.02
S8310.03
S8310.04
S8310.05
S8310.06
S8310.07
S8310.08
11/4''
11/2''
30
39
2'' 46
0.5
0.5
0.5
12
12
12
390
460
580
2,2
2,1
2,45
3/8''
1/2''
3/4''
1''
12.5
14.5
17
17
0.5
0.5
0.5
0.5
16 45
16 65
16 120
16 170
-10
-10
-10
-10
-10
-10
-10
80
80
80
80
80
80
80
Seal
NBR
NBR
NBR
NBR
NBR
NBR
NBR
0,5
0,49
0,51
0,64