LA6 LA6-POE - patlite.com · LA6-POE devices located in remote offices mirror, or reflect the...

ww

w.p

atlit

e.co

m

Am Soeldnermoos 8, D-85399 Hallbergmoos, GermanyTEL. +49-811-9981-9770-0 FAX. +49-811-9981-9770-9 E-mail: [email protected]

A2603, Daesung, D-POLIS, 606, Seobusaet-gil, Geumcheon-gu, Seoul, 08504, KoreaTEL. +82-2-523-6636 FAX. +82-2-861-9919 E-mail: [email protected]

No.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore 159086TEL. +65-6226-1111 FAX. +65-6324-1411 E-mail: [email protected]

Room 1102-1103, No.55, Lane 777, Guangzhong Road (West), ZhabeiDistrict, Shanghai, China 200072TEL. +86-21-6630-8969 FAX. +86-21-6630-8938 E-mail: [email protected]

4-1-3, Kyutaromachi, Chuo-ku, Osaka 541-0056 JapanTEL. +81-6-7711-8953 FAX. +81-6-7711-8961 E-mail: [email protected]

20130 S. Western Ave. Torrance, CA 90501, U.S.A.TEL. +1-310-328-3222 FAX. +1-310-328-2676 E-mail: [email protected]

7F. No. 91, Huayin St, Datong District Taipei, Taiwan R.O.CTEL. +886-2-2555-1611 FAX. +886-2-2555-1621 E-mail: [email protected]

Olympia Thai Tower, 15th Floor 444 Ratchadapisek Road Samsennok, Huay Kwang Bangkok 10310, ThailandTEL. +66-2-541-5431 FAX. +66-2-541-5429 E-mail: [email protected]

Sleek Design. Fully Customizable. Endless Possiblities.

(Power over Ethernet)for single cable installation

(for Power over Ethernet)

Cycle Time

Level MeterMonitoring

StatusCondition

RemoteMonitoring

Ethernet PoE

LA6-POE

LA6-POE

■ SpecificationsModel

Rated Voltage

Operating Voltage Range

LA6 LA6-POE24V DC/100-240V AC (50Hz/60Hz) 24V DC/48V DC (PoE)

24V DC ±10%/90-250V AC (50Hz/60Hz) 24V DC±10%/36-57V DC (PoE)

Rated Power

Consumption

Standard

Maximum

LA6-5D��N-RYGBC 5W

LA6-3D��N-RYG 3.5W

LA6-5AWJWB-RYGBC 6.5W

LA6-5D��N-YYYYY 7W

LA6-3D��N-YYY 4.5W

LA6-5AWJWB-YYYYY 7.5W

LA6-5D��B-RYGBC 6.5W

LA6-3D��B-RYG 4.5W

LA6-5D��B-YYYYY 8W

LA6-3D��B-YYY 5.5W

7.2W (24V DC)/8.6W (PoE)

12.9W (26.4V DC)/12.5W (PoE)

Signal Line Current Max.70mA (at 24V DC)/Max.20mA (at AC100-240V) Max. 420mA (at 26.4V DC)/10mA (for PoE)

Operation Method

-25℃ to +60℃

Less than 90% RH, no condensation

Upright/Inverted

IP65 （with Buzzer： IP54） (IEC 60529)

Tested while mounted in the upright position

Indoors Only

More than 1MΩ at 500V DC between the power input lead and chassis.

(500V AC at 24V DC/1500V AC at 100 - 240V AC) for 1 minute between terminals and chassis without breaking insulation.

Signal Mode: 9 colors/Smart Mode: 21 colors

11 Sounds

Maximum 85dB

Buzzer Sound No.1, in an upright position with a distance from Buzzer opening at 1meter

-10℃ to +50℃

Less than 90% RH, no freezing or condensation

Upright

IP54 （Stationary type： IP20）（IEC 60529）

Environmental Conditions

Environmental Conditions

Signal Control Signal/Command Control

Standard

Compliances

█ 24V DC EMC Directive (EN 61000-6-4, EN 61000-6-2), RoHS Directive (EN 50581),UL508, CSA-C22.2 No. 14, FCC Part 15, Subpart B Class A, KC (KN 61000-6-4, KN 61000-6-2)

█ 100-240V ACEMC Directive (EN 61000-6-4, EN 61000-6-3), RoHS Directive (EN 50581),Low-voltage Directive (IEC/EN 60947-5-1, EN 62471)

EMC Directive (EN 61000-6-4, EN 61000-6-2, EN55032 Class A, EN 55024, RoHS Directive (EN 50581), FCC Part 15, Subpart B Class A, KC (KN 61000-6-4, KN 61000-6-2), UL 60950-1,CAN/CSA-C22.2 No. UL 60950-1-07, Recognized Component (File No. E480103),* The 24V DC Direct Mount type conforms to the following conformities:UL508, CAN/CSA C22.2 No. 14 Recognized Component (File No. E215660)

Operating Temperature Range

Operating Humidity RangeMounting Direction

Protection Rating

Mounting Location

Insulation Resistance

Withstand Voltage

Display Color Variations

Buzzer Sounds

Sound Level

LA6 LA6-POELA6-5DTNWB-POE

LED Tiers

Model

Mounting

Direct MountStationary with “Clear” switch

TNSN

Extension Function

Rated Voltage

Rated Voltage is 24V DC

PoE Supported

Body Color

O�-whiteW

with Flashing/BuzzerB

Flashing/Buzzer type

LA6-5DLJWB-RYGBC3 Tiers5 Tiers

RYGRYGBC

Color

O�-whiteSilver

WU

Body Color

3 Tiers5 Tiers

35

LED Tiers

with Flashing/Buzzerno Flashing/Buzzer

BN

Flashing/Buzzer type

100~240V AC24V DC

AD

Rated Voltage

Direct Mount/TerminalSteel Pole with L-bracket/CableDirect Mount/Cable

TNLJWJ

Mounting/Wiring

※ There is no Silver (U) body color selection for the LJ type.※ 100V - 240V AC type is only available for LA6-5AWJWB-RYGBC.

■ Lineup

Direct Mount/Terminal/Buzzer

Direct Mount/Terminal/No Buzzer

Direct Mount/Cable/Buzzer

Direct Mount/Cable/No Buzzer





L-Bracket with Pole/Cable/Buzzer

L-Bracket with Pole/Cable/No Buzzer

LA6-3DTNWB-RYG

LA6-3DTNWN-RYG

LA6-3DWJWB-RYG

LA6-3DWJWN-RYG

LA6-3DTNUB-RYG

LA6-3DTNUN-RYG

LA6-3DWJUB-RYG

LA6-3DWJUN-RYG

LA6-3DLJWB-RYG

LA6-3DLJWN-RYG

Off-white

Silver

O�-white

3 Tiers 24V DC

Tiers Voltage Body ColorModel Type









L-Bracket with Pole/Cable/Buzzer

L-Bracket with Pole/Cable/No Buzzer


Direct Mount/Terminal/Ethernet/Buzzer

Stationary/Terminal/Ethernet/Buzzer

LA6-5DTNWB-RYGBC

LA6-5DTNWN-RYGBC

LA6-5DWJWB-RYGBC

LA6-5DWJWN-RYGBC

LA6-5DTNUB-RYGBC

LA6-5DTNUN-RYGBC

LA6-5DWJUB-RYGBC

LA6-5DWJUN-RYGBC

LA6-5DLJWB-RYGBC

LA6-5DLJWN-RYGBC

LA6-5AWJWB-RYGBC

LA6-5DTNWB-POE

LA6-5DSNWB-POE

Silver

O�-white

O�-white

24V DC

100 - 240V AC

24V DC orPoE (48V DC)

5 Tiers

Tiers Voltage Body ColorModel Type

O-AG06A 1710 AEN

Signal Tower

LA6 Series

1 2

A SIGNAL TOWER DESIGNED TO SHOW MORE SO YOU CAN DO MORE

COMMON ON-SITE OCCURRENCES LA6 SOLUTION

CycleTime


StatusCondition

RemoteMonitoring

ColorChange

OUR PROCESSES HAVE CHANGED.We now need to reconfigure the color modules on our Signal Towers.

OUR MACHINE LINE IS EXPERIENCING TOO MANY STOPPAGES.We need to make our workers better aware of machine status, so they can take quicker corrective measures.

WE ARE EXPERIENCING DOWN TIME DUE TO MATERIAL MANAGEMENT.

PRODUCTION STOPPAGES ARE OCCURRING AS A RESULT OF UNEVEN WORKFLOW.

WE NEED TO IMPLEMENT REMOTE MONITORING TO MINIMIZE OUR LABOR COSTS.We need to monitor the operating status of equipment with long processing time, as well as abnormal stoppages or delays as they occur.

Variations in work output is creating bottlenecks that can be smoothed out with a Takt system.

We need earlier notifications prior to materials completely depleting to avoid delays.

The LA6 doesn’t require any hardware or wiring changes to reconfigure colors.The LA6 can be easily programmed anywhere without tools.

The LA6 is able to create better, more dynamic visual signals to elicit a quicker response by workers.

The LA6 can be programmed to act as a visual level meter to help manage materials and material levels.

The LA6 has an internal timer function, allowing you to create visual timers for a streamlined Takt system.

The LA6 is able to send information to other LA6 devices in remote locations via its mirroring function.

Operational Attention Emergency

Breakdown

Minor Error Breakdown Emergency

3 4

Tank Full Midpoint Tank Low

TankLow

■ Display up to21 different colorsfor different equipment statuses

■ Display the level of status severity

■ Display Remaining tank levels in stages

Socket Transmission

PC

Modbus/TCP

PLC

By programming the LA6 to a single, all-tier color arrangement, the equipment status can now be seen at a greater distance, improving awareness and response time.

The LA6 is able to display more detailed information, such as the status severity level, or speci�c abnormality conditions, that workers normally would have to look for on an equipment panel or HMI.

By displaying current material levels, workers can more accurately respond to changes, reducing downtime. As material levels reach certain thresholds, the LA6 can provide earlier visual and audible noti�cations.

The LA6 conveniently integrates into your facilities’ existing LAN infrastructure.By connecting to a PoE (Power over Internet) compliant HUB, the LA6 can be controlled and powered through a single cable.

IMPROVE VISIBILITY WITHOUT RECONFIGURING HARDWARE

WIRING MADE EASY WITH LAN CONNECTIVITY

REDUCE DOWNTIME WITH LEVEL MONITORING

INCREASE EFFICIENCY WITH MORE DYNAMIC VISUAL WARNINGS


StatusCondition

RemoteMonitoring

ColorChange

EthernetPoE

ADVANCED OPTIONS TO SOLVE ANY APPLICATION

5 6

PROBLEM

IMPLEMENTATION MERIT

PROBLEM

IMPLEMENTATION MERIT

Idle time or delays on the production assembly line is sometimes caused by variations in the rate of worker output.

With the LA6 visual Takt system, workers will be more aware of the progress of the entire line, minimizing delays, and resulting in a smoother work flow.

Due to high volumes of products to inspect, some defective products may be overlooked and pass inspection.

With the LA6 internal timer function, inspectors are allotted proper time for each inspection, resulting in an improved yield rate by accurately detecting inferior goods.

SwitchON

Takt Time　100 sec.50 sec.100 sec.

Process Flow

Cart LockRelease Button

Cart Lock

Time up0 sec.

10 sec. lateOperationComplete

Over30 sec. late

Flashing

Overdue

SwitchON

Cart Lock

• Send it to the next process by unlocking it.

• As new carts arrive, the LA6 restarts the cycle time.

Balance the assembly line with a Takt system Prevent defective product outflow during inspection

Sensors detect inspectors as they enter the process line, triggering the LA6 to begin the count and the inspectors carry out inspection until the LA6 turns all blue.

Counting by the minute FinishStartInspection Time = 5 minutes

Inspection

Cycle TimeCycle Time

REDUCE BOTTLENECKS WITH A VISUAL TAKT SYSTEM

7 8

Administration BuildingOutdoor Building 1 (Unmanned) Administration BuildingFactory

Tank in Building 1needs attention!

ControlBox (PLC)

LAN

ContactInput

Command

Interface Converter

PROBLEM PROBLEM

IMPLEMENTATION MERIT IMPLEMENTATION MERIT

OutdoorPump

LiquidSensors

Quicker response with remote monitoring See equipment status from multiple locations

Tanks located in remote buildings tend to be overlooked until the tanks are completely depleted.

The LA6 can be used as an economical level meter system, capable of alerting remote personnel of equipment changes in real-time.

Managers in remote offices need to monitor machinery statuses on the factory floor in real-time.

With the LA6-POE’s built-in mirroring function, equipment status, Takt time, etc., can be communicated to other LA6-POE devices in remote locations via a LAN connection. This data can also be sent to a third-party software through the LAN connection for data analysis or Andon monitoring.

Analog output for every liquid level sensor threshold.

Visualrepresentation of gradually changing tank fluid levels.

BuzzerBuzzerBuzzer

Up to 8remote

Locations

1. The signal is sent from the LA6-POE, located on the equipment to indicate the status.

2. LA6-POE devices located in remote offices mirror, or reflect the status of the LA6-POE in the factory.

RemoteMonitoring

EthernetPoE

RemoteMonitoring

LAN

Internet

OBTAIN EQUIPMENT INFORMATION FROM REMOTE LOCATIONS

Φ60IP65※

24V DC

Buzzer11 Sound

100 - 240V AC

85dB(at 1m)

PC PLC

Φ60IP54※

Buzzer11 Sounds

85dB(at 1m)

EthernetPoE

24V DC 48V DC(PoE)

HTTPNEW

For LA6/LA6-POE For LA6 For LA6-POE

LA6

LA6-POE

LA6

LA6 / LA6-POE

EthernetPoE

Modbus/TCP

EASYWEB Setup

INPUTS

9 10

Diffusion &Water Resistance

Sound

BUZZER SOUND SETUPThe built-in switch has four selectable settings for "Loud" (about 85dB) -> "Middle" (about 80dB) -> "Low" (about 75dB) -> "O�".

COLOR SETUPThe built-in switch can also allow a manual selection of 9 colors to be set for each tier.

Multi-function Switch for various setupsThe newly developed lens design e�ciently di�uses LED light so that it is unmistakably visible, even from great distances.

A new lens design optimizes visibility.

A newly developed compact loudspeaker not only can transmit a clear sound of 85 dB (at 1m), but also has added water resistance. A di�erent alarm sound can be set up with each display pattern when in the Smart mode. (Only three of the 11 alarm patterns are selectable in the Signal Tower mode)

The alarm has a total of 11 soundsto match various applications.

Use the free editing software to freely change the LA6 colors and patterns.Upload colors and patterns to the signal tower via a USB cable.** The USB cable is sold separately (USB microB type with Charging/ Data Transfer capability).

PoE (Power over Ethernet) is a technology which lets network cables carry electrical power. PoE can bring many advantages, such as reducing costs of installing electrical cabling, by connecting it with a HUB supporting PoE, or have the �exibility of not having to be tethered to an electical outlet.

Conveniently connects to an existing network with PoE support.

By using a PNS Command, the LED unit colors for tiers 1-5 can be controlled.

3rd Party Software: LA6-POE can send machine status data over Ethernet to centralized software for remote Andon monitoring or data analysis.

Has eight inputs available for connecting a PLC, or discrete I/O. Data through these inputs can be transferred to a server over the Ethernet. DC power can also be wired if a Poe supporting LAN is not available.

Detachable Terminal Block

Access and control all LA6-POE functions remotely in various network environments with this flexible protocol.

24V DC / 3 and 5 Tier Types 100 - 240V AC 5 Tier Types

LightingFlashing/Buzzer Steel Pole Type (L J)

O�-white Silver

※ Alarm Type: IP54

Flashing/BuzzerO�-white

Direct Mount / Stationary type

Optional Parts

※ Direct Mount Type

Direct Mount type

Stationary Typewith "Clear" switch

PNS Command

HTTP Command

Modbus / TCP

⃞ Stationary Bracket:(Magnetic Mount)Model: SZW-060WDirect Mount type

⃞ Wall Mount Bracket:Model: NH-WST2Stationary type

⃞ Stationary Bracket:SZK-003WDirect Mount type

⃞ Mounting Polewith L-Bracket:SZ-70L

⃞ Circular Bracket:SZ-010

⃞ Circular Bracket:SZ-016A

Voltage: 24V DCDirect Mount/Terminal (TN)Steel Pole with L-bracket/Cable (LJ)

Voltage: 100-240V ACDirect Mount/Cable (LJ)

The LA6 alarm features a total of 11 sounds to match various applications.

LA6 SIGNAL TOWER

11 12

9Color

1 2 3 4START

Simple program software!Download and easily set upPATLITE's exclusive editing software.

■ Easy Setup

1. Time-trigger Type

● Various Setups ○ Group setup (Detailed Settings)・ Flash Reduction Setup・ Time Span (0.1 sec./1.0 sec.)・ Repetitive Lighting Setup

○ Sign pattern generation (9 colors)Generate colors as gradations or chaser lights.- Color select: Cycle Speed (Low/High)

○ SimulationCheck the light pattern by previewing it before transmitting data into the unit.

○ System Transmit and Receive* Data can be written into the unit and also read from it, so that patterns can be easily copied into other units.

10 min. progress 30 min. progress 50 min. progress

Setup timing in pattern changes with the editing software.

Automatic

Group 1 Group 2 Group 3

Inputs 1-5, with ON/OFF signal combinations, is made to operate.

① Color Setup (Maximum of 21)

* The screen above is only an image (conditions may vary with setup parameters).

* A single display type can register a maximum of 31 groups.

21 di�erent colors can be selected as part of a program.

③ Operations (Maximum of 63)Select the desired color, �ashing period and the active duration of the light and alarm* (maximum of 3,600 seconds, and 11 sounds).

② Signal Tower Setup FeaturesWith a maximum of 15 groups*, 63 series of operations can be registered to perform an operation setup as one group.

AutomaticContactInput

ContactInput

ContactInput

ContactInput

Free

Pattern transition timing can be controlled by individual discrete inputs.

2. Pulse-trigger Type

Determine thresholds for pressure / temperature, etc.

ContactInput

ContactInput

ContactInput

No.1 No.2 No.3

Level 1 Level 2 Level 3

No.1 No.2 No.3

Maximum pattern display

Maximum group number

63 Patterns

15 Groups


Maximum group number

63 Patterns

15 Groups


Maximum group number 31 Groups

-

Elapsed Time / Countdown / Cycle Time

3. Single-display Type

Error level / Request Priority / Status Display, etc.

L A6 SERIES

EditingSoftware

* Limited to Time Trigger and Pulse Trigger modes

②①

③

Editing software and pre-set data patterns are downloadable for free from our website.

Setups for the individual group operation can be executed. Pattern change timing can be setup with the editing software.

Transitions from one pattern to another can be triggered by setting elapsed time or by individual discrete inputs.

The product memory operates for the individual group functions.

http://www.patlite.comSearchSearchpatlite

Colors can be configured manually with the push button, without the need to edit the software.

21Color

* Data transfer is also possible when the main unit is OFF and the system's power source is the USB bus power.

Smart Mode

Signal Tower Mode

Ab. 0.5 sec.Finished!!

At first, red is selected.

All tiers begin flashing green.

Continue pushing for about 3 seconds to start selecting the desired LED color.

Push the setup key for about 0.5 second after

the power source is ON.Y

Ab. 3 sec. Ab. 3 sec.

Continue pushing for about 3 seconds to enter the selected LED color.

Ab. 0.5 sec.

Repeat for all tiers

R

G

B

WPV

LB

LY

Off

13 14

■ Smart Mode Inputs (for Mode Change)

Input1

Input2

Input3

Input4

Input5

Input6

Input7

Mode Change

Display Input

STOP

Mute

Clear

At Input

①Time-triggerType

②Pulse-triggerType

③Single-displayType

Trigger

Mute

Clear

Mute

Clear

Binary InputMaximum 15（（

Display Input


Display Input


Red

Amber

Green

Blue

White

Sky Blue

Purple

Pink

It can be used for the smart mode when a signal is applied to the

mode change line.

※ For connector inputs, mode change is terminal 11 purple ; and terminal 10 for the PoE type.

24V DC Wiring (LA6/LA6-POE)

LA6

24V DC (Class 2, Non-polar)

LED 5/ Input 5

Power Supply Wire

RedOrange

GreenBlue

White

Yellow

Flashing/Pulse EnableCommon Line Brown

Alarm 1/ Input 6

Mode Change

Power Supply Wire

Purple

Pink

Alarm 2/ Input 7 Sky Blue

Gray

ExternalContact

Flashing/

Pulse Enable

ExternalContact

Lighting/

Alarm

No Flashing/Alarm BN Flashing/Alarm

B Flashing/ Alarm Type

LED 4/ Input 4LED 3/ Input 3LED 2/ Input 2LED 1/ Input 1

PLC

EC

B

Circuit Diagram

LA6

No Flashing/Alarm BN Flashing/Alarm

24V DC (Class 2)B Flashing/ Alarm Type

Output Unit ②

Flashing/

Pulse Enable

Output Unit ①

Lighting/

Alarm

Don’t Apply VoltageDon’t Apply Voltage

LED 5/ Input 5

Power Supply Wire

Flashing/Pulse EnableCommon Line

Alarm 1/ Input 6

Mode Change

Power Supply Wire

Alarm 2/ Input 7

LED 4/ Input 4LED 3/ Input 3LED 2/ Input 2LED 1/ Input 1 Red

Orange

GreenBlue

White

Yellow

Brown

Purple

Pink

Sky Blue

Gray

External Contact Classi�cation Contact Relay External Contact Classi�cation PLC（NPN Transistor）

/ 119

1/ 1

2/ 2

3/ 3

4/ 4

9/ 7

8/ 6

10/ 11

7/ 5

6/ 10

5/ 8

/ 11

/ 22

/ 33

/ 44

/ 75

11/ 999

/ 86

/ 97

/ 1011

/ 610

/ 58

100 - 240V AC Wiring (LA6)

ExternalContact

Flashing/

Pulse Enable

ExternalContact

L N

LA6-5A

100 ～ 240V AC 100 ～ 240V AC

L N

Fuse1A

Common Line

Don’t Apply Voltage

B Flashing/Alarm

Fuse1A

PLC

Output Unit ②

Output Unit ①

B Flashing/Alarm

LA6-5A

Flashing/

Pulse Enable

EC

B

Circuit Diagram

Lighting/

Alarm

Lighting/

Alarm

B Flashing/ Alarm Type

Don’t Apply Voltage

RedOrange

GreenBlue

White

Yellow

Brown

Purple

Pink

Sky Blue

GrayBlack


LED 1/ Input 1LED 2/ Input 2LED 3/ Input 3LED 4/ Input 4LED 5/ Input 5Alarm 1/ Input 6Alarm 2/ Input 7Mode Change

Power Supply WirePower Supply Wire

Common Line

RedOrange

GreenBlue

White

Yellow

Brown

Purple

Pink

Sky Blue

GrayBlack


LED 1/ Input 1LED 2/ Input 2LED 3/ Input 3LED 4/ Input 4LED 5/ Input 5Alarm 1/ Input 6Alarm 2/ Input 7Mode Change

Power Supply WirePower Supply Wire

External Contact Classi�cation Contact Relay External Contact Classi�cation PLC（NPN Transistor）

External Contact Classi�cation Contact Relay

LED Tier 1 / Input 1





Power Supply Wire

Flashing/Pulse EnableCommon line

Alarm 1 / Input 6

Mode Change

Common line

Power Supply Wire

Alarm 2 / Input 7

ExternalContact 1

For Lighting

LA6-POE 〈Note〉Since �ashing and Pulse Enable Common are uncontrollable for a PoE input, do not connect it.

Do Not Use!

Do Not Use!

Do Not Apply Voltage!

MEMO

LAN Cable Connection

• Be sure to use the IEEE802.3af compliant products for the PoE power feeder systems.

• Priority is given to the 24V DC power supply when both the 24V DC power source and PoE power feeder systems are connected simultaneously.

• If both power sources are simultaneously connected, when disconnecting the 24V DC source, this product may reboot.

The LAN cable should be rated for category 5e or higher. A straight or cross cable can be used.

/ / Red ① 1

■ Wiring Diagram color and number indication

PoE Connector wire number Terminal connector wire numberCable signal wire number

Red indicates the lead wire color (for Cable type models) ※ The lead wire color does not indicate the LED luminescence color.

9

11

10

12

1

2

3

4

7

8

9

6

5

POE Wiring (LA6-POE)

■ Connector Inputs

LA6 LA6-POE(Terminal Type)

Stationary

Mounting Hole(φ5×3 places)

NameplateLocation

Product Front(Buzzer Diaphram)

ProductOutsideDimension

DistributionHole (φ26)

Direct Mount

Mounting Dimensional Drawing■

Mounting Hole(φ5x3 places)

Product Front(Buzzer Diaphram)

NameplateLocation

LAN Unit OuterDimensions


φ40

120°

120°

116

120°120°

φ

■ Outer Dimensional Drawings ■ Wiring

DIMENSIONS AND WIRING

Red

Orange

Green

Blue

White

Gray

Black

Yellow

Gray

Black

Purple

LED 1/Input 1

LED 2/Input 2

LED 3/Input 3

LED 4/Input 4

LED 5/Input 5

Alarm 1/Input 6

Alarm 2/Input 7

Power Wire

Flashing/Pulse Enable Common

Power Line (Signal-line Side)

Mode Change

12

3

4

56

7

8

9

10

11

Input 1

Input 2

Input 3

Input 4

Input 5

Input 6

Input 7

Power Wire Flashing/PulseEnable Common

Power Line(Signal-line Side)

Mode Change

7

8

9

10

11

12

1

2

3

4

5

6 COM

Headcover（Mode Switch inside →※1）

LED Unit

LAN Bracket

Stand Cover

Base Plate

φ60

145

USB Cover（In Back） ※2

428

16

228

φ60

70

110

405

16

258

LAN Unit

“Clear” Switch

Nameplate(Backside)

LA6-5DSNWB-POELA6-5DTNWB-POE

Direct Mount Stationary

※ Be sure to check the wiring diagram of the PNP type transistor by visiting our website and viewing the comprehensive operation manual, etc.

※ Be sure to visiting our website and viewing the comprehensive operation manual, etc. for further details.

325

4.5

31

8166

Top View

Side View Rear View

60

20

81

2-φ11

φ22.5

φ5

Wire length: 1060Wire type: UL2464/AWG24

※1 Maximum Board thickness: 4 mm

■ TN Direct mount/TerminalD 24V DC

■ LJ Steel Polewith L-bracket/CableD 24V DC

■ WJ Direct mount/CableA 100-240V AC

■ L Dimensional Drawing forSteel Pole with L-bracket

313.5

＜ Overall Height ＞: 320 - : 254 - : 280 - : 214 -

BBNN

5353

110

70

- : 390

16

B5

φ60

10

8.5

(φ8.5)

＜ Overall Height ＞

※1

φ60

40

70

284

～

294

16

10

※3

φ60

40

70

16

20

8.5

＜ Overall Height ＞: 330 -

: 290: 264 -

: 224 - -

BBNN

5353

※2※1


※3 Maximum Boardthickness: 16mm

※2 TN Underside ViewThreaded hole for cable gland attachment(M16×1.5 Effective screw length: 12mm)

Cablegland

<Note> The cable gland is notincluded with this product.

Wire length: 1360Wire type (Power): UL2464/AWG18Wire type (Signal): UL2464/AWG24

MountingHole (φ5)

OuterDimension ∅40

120° 120°

(Unit: mm)

(34.6)

6～17

Front Direction(Alarm Direction)

(10) 10

NameplateLocation

Wiring Hole (φ12※2)( TN Type)

※2 Use φ23 for Cable Gland

MountingHole (φ5)

MountingHole (φ5)

LA6 LA6-POE

LA6 LA6-POE - patlite.com · LA6-POE devices located in remote offices mirror, or reflect the...

Documents

Transcript of LA6 LA6-POE - patlite.com · LA6-POE devices located in remote offices mirror, or reflect the...