KVM Console to USB 2.0 Portable Laptop · PDF file KVM Console to USB 2.0 Portable Laptop...

Click here to load reader

  • date post

    22-Mar-2020
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of KVM Console to USB 2.0 Portable Laptop · PDF file KVM Console to USB 2.0 Portable Laptop...

  • Manual Revision: 01/26/2012

    DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com

    For the most up-to-date information, please visit: www.startech.com

    NOTECONS01

    KVM Console to USB 2.0 Portable Laptop Adapter

    *actual product may vary from photos

  • FCC Compliance Statement

    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    Reorient or relocate the receiving antenna.

    Increase the separation between the equipment and receiver.

    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

    Consult the dealer or an experienced radio/TV technician for help.

    Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

    This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

  • Instruction Manual i

    Table of Contents Introduction ........................................................................................................................................................1

    Packaging Contents ................................................................................................................................1

    System Requirements ............................................................................................................................1

    Installation............................................................................................................................................................2

    Driver Installation ......................................................................................................................................2

    Hardware Installation ..............................................................................................................................2

    LED Indicators .............................................................................................................................................3

    Using the USB Crash Cart Adapter ........................................................................................................4

    Zooming .........................................................................................................................................................4

    Toolbar .............................................................................................................................................................5

    Video Menu ..................................................................................................................................................7

    Keys Menu Item .........................................................................................................................................8

    Mouse Menu ................................................................................................................................................9

    Toolbar Menu ..............................................................................................................................................11

    Troubleshooting ...............................................................................................................................................12

    Specifications .....................................................................................................................................................13

    Technical Support ...........................................................................................................................................14

    Warranty Information ....................................................................................................................................14

  • Instruction Manual 1

    Introduction Packaging Contents • 1 x USB Crash Cart Adapter

    • 1 x USB to PS/2 adapter

    • 1 x USB A to Mini-B cable

    • 1 x Driver and Software CD-ROM or USB flash drive

    System Requirements Notebook Requirements

    • USB 2.0 enabled notebook computer

    • 20MB available hard drive space

    • 24-bit capable display

    • Windows XP(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Mac OS x, and Linux Fedora(FC10/ FC11)/ Ubuntu (8.10/9.4)

    Server Requirements • VGA enabled video card (DVI supported via optional DVIVGAMF adapter)

    • USB or PS/2 keyboard support

    • USB mouse support

  • Instruction Manual 2

    Installation Driver Installation Windows 2000/XP/ Vista

    Before installing the software on Windows, please disconnect the USB Crash Cart Adapter and cancel any dialog windows regarding “Add new hardware”. These windows can interfere with the installation process.

    1. Insert the provided CD or USB flash drive and run the setup.exe installation program.

    2. Proceed through the installation prompts, until complete.

    3. Once complete, the software and drivers will have been installed on the system.

    4. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the supplied USB mini-B to A cable. The other connections to a server are not needed at this point.

    5. A message should pop-up entitled Found New Hardware.

    6. Windows should find the device driver files and install them automatically. This is a one-time step.

    7. The product is ready to be used now, and the main application may be launched now. There is no need to reboot.

    Mac OS X

    1. Insert the provided CD or USB flash drive into the computer.

    2. Double-click on the MacOSX-install.dmg file that you find on the media.

    3. After a short delay to verify that disk image, a finder window will open showing the application and a link to /Applications. Drag the main application onto the Applications link.

    4. The application is now installed and ready for use: Find it in /Applications and double click on it to start.

    5. If you would like to add this application to the Dock, you can drag and drop it from / Applications onto the Dock.

    6. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the supplied USB mini-B to A cable.

    Hardware Installation Once the drivers and software for the USB Crash Cart Adapter are installed on the notebook computer, it can be plugged into the server.

    Connect the attached DE-15 VGA cable and the USB type A cable into the desired server. For DVI-I (analog) computer systems, please use a DVI to VGA adapter (StarTech.com ID: DVIVGAMF). A USB to PS/2 adapter is included for systems that require a PS/2 connected keyboard (mouse will not be available).

  • Instruction Manual 3

    LED Indicators Server KB/Mouse: This lights up when the emulated USB keyboard/mouse is working. It will blink briefly whenever the emulated mouse moves, or emulated key is pressed. Constant flashing indicates some problem with the USB connection to the server. This can happen if disconnected, or if the host’s operating system is not enumerating the USB device.

    Server VGA: This indicates a valid VGA video signal is being received. It will be off if nothing is connected (and in some power saving modes) and may flash if an unsupported video mode or other trouble is seen with the video signal. This light will not turn on, regardless of the video input status, until the adapter is connected to the application software at least once.

    User Console Link/Activity: This lights up when a good connection to the laptop is established. If flashing, it indicates the USB to the laptop is not connected or being ignored. Blinks briefly when video data is sent to the laptop.

    If all the lights are off, then this means the USB Crash Cart Adapter has no power from either USB connection. Under normal operation, either USB port can provide enough power to operate the unit. The USB keyboard/mouse emulation is always active, even if the laptop USB is disconnected.

    When used in PS/2 mode, the topmost ligh