Kern Worktable kernMail for vertical stacker and modules...Kern 3500 and Kern 3600 Inserting Systems...
1
kernMail The worktable plate is simply moved to the rear and access to the vertical stacker is provided. Since the worktable stands on fixable rollers, it can be pushed to the side without any problems. There are no restrictions in the opera- tion of the vertical stacker. By all means, it can also be used for other modules (ZS, KV, input modules). Many good ideas come from practice and in the daily use of the systems. This is also how the concept for the new worktable for the vertical stacker was created. This practical worktable module can be added to the Kern 3500 and Kern 3600 Inserting Systems in the output area. Adjustments, retooling and trouble- shooting are considerably simplified, as material deposited on the cover of the vertical stacker no longer needs to be removed individually. Features ■ Height: 1125 mm ■ Width: 1180 mm ■ Length: 450 – 650 mm ■ Simple operation ■ Individually configurable ■ 4 rolls for easy transport Our Services ■ Personal consultancy on-site ■ Requirement analysis, and solution proposal according to customer needs ■ Installation by Kern AG ■ System integration ■ On-site training of your employees ■ Reliable support and maintenance during operation ■ Customer-oriented service models The worktable has been specially designed for the Kern 3500 and Kern 3600 Inserting Systems to expand the functionalities. Kern Worktable for vertical stacker and modules Kern AG 3510 Konolfingen Switzerland Phone +41 31 790 35 35 [email protected] www.kernworld.com April 2020 _ V1 _ The specifications are not contractually regulated and may change without further notice.
Transcript of Kern Worktable kernMail for vertical stacker and modules...Kern 3500 and Kern 3600 Inserting Systems...
-
kernMail
The worktable plate is simply moved to the rear and access to the vertical stacker is provided.
Since the worktable stands on fixable rollers, it can be pushed to the side without any problems.
There are no restrictions in the opera-tion of the vertical stacker.
By all means, it can also be used for other modules (ZS, KV, input modules).
Many good ideas come from practice and in the daily use of the systems. This is also how the concept for the new worktable for the vertical stacker was created.
This practical worktable module can be added to the Kern 3500 and Kern 3600 Inserting Systems in the output area.
Adjustments, retooling and trouble-shooting are considerably simplified, as material deposited on the cover of the vertical stacker no longer needs to be removed individually.
Features
■ Height: 1125 mm
■ Width: 1180 mm
■ Length: 450 – 650 mm
■ Simple operation
■ Individually configurable
■ 4 rolls for easy transport
Our Services
■ Personal consultancy on-site
■ Requirement analysis, and solution proposal according to customer needs
■ Installation by Kern AG
■ System integration
■ On-site training of your employees
■ Reliable support and maintenance during operation
■ Customer-oriented service models
The worktable has been specially designed for the Kern 3500 and Kern 3600 Inserting Systems to expand the functionalities.
Kern Worktable for vertical stacker and modules
Kern AG3510 KonolfingenSwitzerland
Phone +41 31 790 35 [email protected]
il 2
02
0 _
V1
_ T
he s
peci
fica
tion
s ar
e no
t co
ntra
ctua
lly r
egul
ated
and
may
cha
nge
wit
hout
fur
ther
not
ice.
