KEG Technologies, Inc.

Toll-Free Phone: 1-866-595-0515 Toll-Free Fax: 1-866-595-0517

Email: [email protected] www.kegtechnologies.net

Contact your local Expert!

mailto:[email protected]

The Kleen Sight camera has fluid mechanics and will clean the pipe as well as video at the same time. The video is stored inside the nozzle/camera until ready to upload. Camera videos can be uploaded using Wi-Fi to any smartphone, tablet, or computer.

KEG Technologies Smart Phone Video Library Simply scan the QR Codes to view our products in action!

Our nozzle with patented fluid mechanics makes short work moving debris from this line and scouring the pipe wall. See catalog for more information on nozzles for specific applications; cleaning, penetrating clogs, maintenance cleaning and grease removal.

Seeing is believing! Watch and see this huge root growth destroyed quickly with a Super 150 high speed, high torque chain cutter. See catalog for more information and cutter sizes that work in pipes from 2” to 48” and larger. Roots, grease and mineral deposits are quickly removed with our cutters.

Our floor cleaners with patented fluid mechanic do an exceptional job removing debris from small to large diameter pipes. With our twin connector attachment it is possible to clean pipes over 8 feet in diameter. Ask us about how one contractor cleaned a pipe 9 feet in diameter that was 80 percent full faster then he could imagine. See catalog for more information and sizes.

See our most powerful cutter the Supernova move through a pipe taking no prisoners. Roots, concrete, mineral deposits, protruding laterals are no match for the Supernova. Can accommodate pipe sizes from 6” to 48” with optional skid extensions. See catalog for more information and sizes.

The Axis is KEG’s controlled speed rotational nozzle. The operator can control the rotation speed by simply increasing or decreasing the water pressure. The Axis is an excellent for all around cleaning, grease removal and small to medium root infestation. See catalog for more information and sizes.

The Duce is KEG’s vibrating rotational nozzle. The vibrating action in the pipeline breaks up hard scale and deposits. The Duce is ideal for removing grout and mortar residue, scaling, tuberculation or other deposits that have hardened to the pipe wall or floor. See catalog for more information and sizes.

• Money Back guarantee on all products • 5 years on titanium ceramic inserts • 3 years on all tool bodies with replaceable ceramic inserts • 1 year on replaceable steel inserts • 1 year on all tool bodies with replaceable steel inserts • 2 years on chain cutter fins and tube assemblies • 2 years on rotating bodies (chain cutter and rotor nozzles) • 1 year on chain cutter skids and distance plates • 1 year on swivels (when shipped with original tool) • 1 year on Tier 1 nozzles, steel inserts, holders • 180 days on remanufactured tools • 90 days on new replacement warranty items

KEG Technologies offers a limited lifetime warranty on tools and items manufactured by KEG. This warranty applies against manufacturing defects. Limited warranties exist on all bodies, inserts, and components. KEG will not warranty against loss, failure and/or damage due to: improper set-up, improper assembly, abnormal wear, improper use, use outside the design parameters of these tools, unauthorized modification of these tools, or failure to perform recommended maintenance on said tools.

KEG WARRANTY

MISSION STATEMENT

KEG's commitment is to our customers and our industry by providing quality products supported through continuous education

and technology improvement.

SCOPE

KEG offers superior support, training, and demonstrations for all our products. KEG guarantees that our products will perform as advertised, and that we will be in the field with you to ensure

your complete satisfaction!

WHO WE ARE

KEG Technologies, Inc., is the sister company of KEG GmbH, headquartered in Limbach-Oberfrohna,

Germany. KEG serves the United States market from its distribution center in Spartanburg, South Carolina.

Our Spartanburg distribution center stocks a complete line of KEG products, including all nozzle, floor cleaner, and chain cutter lines, inserts, and all other parts and accessories. An order placed with

KEG can be quickly filled to your satisfaction.

Contents

Pipe Cleaning Process Chart Page 4 Kleen Sight Camera Chain Cutter Family Page 6 Chain Cutters Page 7 Micro Chain Cutter Page 8 Mini Chain Cutter Page 9 Super Cutter Plus 150 Page 10 Super Cutter Plus 200 Page 11 Supernova Chain Cutter Page 12 Axis Nozzles Page 13 Duce Nozzles Page 14 Equalizer Nozzles Page 15 Storm Water Infrastructure Page 16 Floor Cleaner Family Page 17 Twin Floor Cleaners Page 18 KEG Patents Pages 19-20 Penetrating Nozzle Family Page 21 Triple Edge Quattro Nozzles Page 22 Drill Point Quattro Nozzles Page 23 Rambo Nozzles Page 24 Cleaning Nozzle Family Tier 1 Page 25 Standard Nozzles Page 26 Ball Nozzles Page 27 Forward Jet Nozzles Page 28 Egg Nozzles Page 29 Egg Devastator Nozzles Page 30 Cleaning Nozzle Family Tier 2 and Tier 3 Pages 31-32 Sewer Flush Nozzles Page 33 Traction Nozzles Page 34 Cleaning Nozzles Pages 35-36 Sewer Nozzles Page 37 Torpedo Nozzles Page 38 Royal Nozzles Page 39 Aluminum Nozzles Page 40 Finishing Nozzles Page 41 Rotor Nozzles Page 42 Twister Nozzles Page 43 Hydro Excavation Nozzles Page 44 Ejector Nozzles Page 45 Nozzle Kits Pages 46-48 Leader Hose and Tiger Tails Page 49 Region Contact Info Page 51

4 www.kegtechnologies.net

PIPE CLEANING AS A PROCESS picking the correct tool for the job

Complete

Blockage

Partial Flow

Conditions

Free Flow

Conditions

Maintenance

Suggestions:

Periodic Cleaning

Finishing Processes

Monitor for future

Problems

Possible nozzles

Chain Cutters

Penetrating Family

Traction nozzle

Possible nozzles

Speciality Rotors

Floor Cleaners

Cleaning Family

Chain Cutters

Possible nozzles

Finishing Family

Cleaning Family

Floor Cleaners

Possible

Problems

Root Mass

Grease

Silt and Debris

Pipe Collapse

Other Obstructions

Possible

Problems

Root mass

Grease

Silt and debris

Protruding traps

Tuberculation

Kleen Sight Camera

Clean and inspect in one pass

for 8” and bigger pipes.

5

Advantages: 1080P HD self leveling camera head. Clear video images Internal 16GB memory. No SD card needed Wi-Fi Hot Spot to download data. No exposed components. No need to clean lines first. Save time and money 80 LED lights . Illumination for all your needs. 6+ hours of video per charge. Full day video capability Waterproof magnetic function switch. Protects camera from moisture damage. 2 Li-Ion Batteries and 110 VAC Charger High performance Tier 3 Torpedo nozzle (15 and 25 degree) Replaceable Titanium Ceramic inserts

Patent protected design

To order, call toll free: 1-866-595-0515

WOW ALL NEW Wi-Fi connectivity to

your device

No need to pre-clean your lines because this nozzle has the ability to clean as well as video at the same time. Wi-Fi connectivity downloads data at similar speed as a cable connection while ensuring the watertight integrity of the camera nozzle.

CHAIN CUTTER FAMILY

KEG Root Cutters For Roots and Scaling Removal KEG offers five models for customers with root infiltration or grease and scaling problems. Beginning with the Micro Chain Cutter in 2" to 4" applications, Mini Chain Cutter in 4" to 10" applications, the Super Cutter Plus 150 for 6" to 24“ pipes, the Super Cutter Plus 200 for pipes 8" to 48", and finally the Supernova Chain Cutter WOW! For 6” to 48” pipe all with one Cutter, can you believe it! Let us show you with a demonstration. KEG's family of chain cutters has the flexibility to handle the removal of the heaviest obstructions.

Mini Cutter SCP 150 Cutter Supernova Cutter

Superior Performance and Flexibility of Application

KEG's chain cutters are made of stainless steel and offer superior thrust and drive efficiency. Stabilized by stainless steel guide carriage skids, the cutters feature a unique spinner nozzle design that rotates the main shaft, spinning the attached chains at 2,500 RPM. The cross cutter bit installed on the front of the shaft also serves as a penetrating bit to "bore" into the root or obstruction. Chains can be configured for grease or scale removal, or for root removal.

Ease of Configuration

The ease of field configuration is a definite plus for the operator. Installation of replacement chain, or skid configuration for larger diameters, is a simple matter and is quickly done in the field. Standard maintenance and cleaning is easy and prolongs the service life of the cutter. KEG Chain Cutters also feature a 2 year limited warranty and come configured with titanium ceramic inserts for better performance. Finally, no lubrication (other than the HP Swivel joint at the hose connection) is required to operate a KEG Chain Cutter.

Always clean and video before operating any chain cutter. Also, follow operating guidelines in KEG chain cutter manual.


CHAIN CUTTERS water driven technology designed to remove

any clog, obstruction, or root mass

KEG’s Chain Cutter family offers the field operator a complete range of cutters to remove roots and scaling. Our water driven design is low maintenance and in-the-field configuration is a simple matter of a few minutes work. Finally, KEG’s cutters are suitable for a variety of applications, ranging from root removal, scaling, tuberculation, and other types of deposits and blockages.

Micro Chain Cutter

Advantages:

water driven design no lubrication required wide pipe diameter range

Applications:

SANITARY, STORM pipes 2” to 48” Tier Two nozzles

Chain Cutter Specifications:

High speed, high torque cutters using flexible conveyor chain to remove obstructions without damaging pipe lines

7

K E G C H A I N C U T T E R F A M I L Y Part

Number Name Pipe Size

200110-C KEG Micro Chain Cutter Kit 2", 3", 4"

200343-C KEG Mini Chain Cutter Kit 4", 6", 8"

200242-C KEG Super 150, Basic Kit 6" - 16"

200903-c KEG Super 150 Expansion Kit to 24" 16" - 24"

200151-C KEG Super 200, Basic Kit 8" - 20"

200901-C KEG Super 200 Expansion Kit to 36" 22" - 32"

200902-C KEG Super 200 Expansion Kit to 48" 36" - 48"

200400-C KEG Supernova Chain Cutter, Basic Kit 6" - 16"

200402-C KEG Supernova Expansion Kit to 24" 18" - 24"



The Chain Cutters are recommended with ceramic inserts.


MICRO CHAIN CUTTER

Advantages

plumbing applications easily configured for multiple jobs complete Kit with Case and Tools included manual included

Applications

SANITARY Offsets, Pipe Rips, Services, Laterals, Small Pipes Root Removal in Laterals and Sanitary Service Lines Scale and Rust Removal 2”, 3”, and 4” Lines Tier Two Nozzle

Technical Specifications

Suitable for 2” to 4” pipes, use skid with 4” only Individual skid for 4” applications Individual skid for 6” pipe application optional 90 Degree lateral applications should not utilize the guide carriage skids Lubrication is not required Pump Flow of 8 GPM required; maximum 25 GPM Tier Two Nozzle Titanium ceramic inserts included

Micro Chain Cutter


MINI CHAIN CUTTER

Advantages

Suitable for 1/2”, 3/4”, or 1” Applications easily configured for multiple jobs complete Kit with Case and Tools included manual included

Applications

SANITARY, STORM Roots, Scaling, Grease Root Removal in Laterals and Sanitary Service Lines Removal of Protruding Taps Scale and Rust Removal 4”, 6”, and 8” Lines Tier Two Nozzle


Suitable for 4” to 8” pipes Individual skid for 4”, 6” and 8” applications Available with optional 10” skid ¾” swivel is the standard configuration Reducers or expanders optional

Mini Chain Cutter

9 To order, call toll free: 1-866-595-0515

SUPER CUTTER PLUS 150

Advantages

Changeable Cross Cutters and Inserts easily configured for multiple jobs stainless steel construction complete Kit with Case and Tools included manual included

Applications

SANITARY, STORM 6” to 16” with optional expansion kit to24” pipe diameters Root Removal, Scaling, Rust, Grease or other deposits Tier Two Nozzle


Skids and distance plates for all applications No lubrication for the main body required 2 cutter chains Titanium ceramic inserts included

Super Cutter Plus 150


SUPER CUTTER PLUS 200

Advantages

Changeable Cross Cutters and Inserts easily configured for multiple jobs stainless steel construction optional spray bars for grease available optional pulling device for large diameters available complete Kit with Case and Tools included manual included

Applications

SANITARY, STORM Pipe Diameters Basic kit 8”- 20” expansion kits to 32” and 48” Root Removal, Scaling, Rust, Grease, Chemical or other deposits Tier Two Nozzle


suitable for 8” to 20” pipe, may be extended to 48” No lubrication for the main body required 3 cutter chains Titanium ceramic inserts included

Super Cutter Plus 200

To order, call toll free: 1-866-595-0515 11

SUPERNOVA CHAIN CUTTER

Advantages

application also in difficult pipes (offsets, pipe rips, protruding taps, etc.) solid and reliable stainless steel construction efficient cleaning by self-sharpening reinforced chains optional spray bars for grease removal optional pulling device complete Kit with Case and Tools included manual included

Applications

SANITARY, STORM Pipe Diameters Basic Kit 6”-16” expansion kits to 24”, 32” and 48” Root Removal, Scaling, Rust, Grease, Chemical or other deposits Tier Two Nozzle


Standard 6” to 16” pipe, may be expanded to 48” pipe no lubrication for the main body required 2 heavy duty roller cutter chains Titanium ceramic inserts

Supernova Chain Cutter


AXIS NOZZLES controlled speed rotation cleaning for pipes and manholes

The Axis is KEG’s controlled speed rotational nozzle. By simply increasing or decreasing the pressure in the water system, the speed of rotation of the Axis can be controlled by the operator. The Axis is an excellent all around cleaning and grease removal nozzle for pipelines, manholes and lift stations. The Axis can be outfitted with a skid and/or high pressure swivel and is furnished with titanium ceramic inserts.

Large Axis Nozzle

Advantages:

controlled rotational speed no maintenance or lubrication required replaceable threaded Titanium ceramic inserts multiple applications with one nozzle optional expansion kit to 24” pipe diameter

Applications:

SANITARY, STORM cleaning with fwd. jets grease removal manhole and lift stations

Axis Nozzle Specifications:

Controlled speed directional cleaning with forward jets for cleaning and grease removal and manhole rehabilitation cleaning.

K E G A X I S N O Z Z L E S

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100076-C 1.25" to 1.00" 12 24.3 from 8"

100272-C 1.00" to 0.75" 9 20.5 from 6"

The Axis nozzle is only offered with ceramic inserts.

Medium Axis Nozzle


DUCE NOZZLES vibration action removes scaling and deposits

The Duce is KEG’s vibrating rotational nozzle. Using the same water driven rotation as our conventional Rotor Nozzles, the Duce literally vibrates pipe deposits away. The Duce has sprocket-like front and rear end caps that use the vibrating action in the pipeline to break up hard scale and deposits. The Duce is ideal for removing grout and mortar residue, scaling, tuberculation or other deposits that have hardened to the pipe wall or floor. The operator should be careful to determine the overall condition of the pipe via a camera inspection before using the nozzle. Do not use the Duce in pipes that display cracks, fissures or other damage! The Duce is available with titanium ceramic inserts.

The Duce nozzle is not recommended for use in clay pipe.

Duce Nozzle 1”

K E G D U C E N O Z Z L E S

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100109-C 1.25" 9 13.0 from 6"

100108-C 1.00" 6 13.0 from 6"

100107-C 0.75" 8 6.7 from 4"

100106-C 0.50" 4 4.0 from 4"

The Duce nozzle is only offered with ceramic inserts.

Advantages:

vibrating action no lubrication required replaceable threaded Titanium ceramic inserts

Applications: SANITARY, STORM scale removal mineral deposits tuberculation flow able fill and concrete

Duce Nozzle Specifications:

Removal of scaling, mineral deposits, tuberculation, asphalt or concrete residue from pipe inverts and pipe walls.


EQUALIZER NOZZLE Virtually Eliminates Blowing Toilets

The Equalizer is one of KEG’s most unique nozzles, specially designed to virtually eliminate blowing toilets. Twelve forward jets at dual angles not only clean but create an umbrella pattern blocking airflow that creates problems blowing toilets. Six powerful rearward jets with KEG’s high efficiency patented Fluid Mechanics provide the ultimate in propulsion, cleaning and debris removal. Rest assured the Equalizer Nozzle by KEG Technologies will help reduce or eliminate residential complaints.

Equalizer Nozzle

KEG EQUALIZER NOZZLES

Part Number

Hose Size

Number of Inserts

Weight (pounds)

100048 1.25" 18 18.25

100047 1.00" 18 18.25

100046 .75" 18 18.25

The Equalizer nozzle is only offered with ceramic inserts.

Advantages:

Virtually Eliminates Blowing Toilets Use with as low as 50 GPM Custom tuned to your truck or jetter specifications Replaceable threaded ceramic inserts

Applications: SANITARY, SEWER All around cleaning Effectively clean problem lines

Equalizer Nozzle Features:

Hardened Stainless Steel Nozzle Body - 18 ceramic jets (12 front & 6 rear) -Fluid Mechanics for propulsion/cleaning jets covered by one or more US Patents: 6,089,243 , 5,992,432.


KEG’s line of products for storm water line maintenance include a wide variety of products, including chain cutters, floor cleaners, large diameter nozzles like Sewer and Royal nozzles. Since 2009, KEG has offered our customers storm water packages that include nozzles, floor cleaners and chain root cutters to cover the gamut of storm system problems. If you are a storm water professional and need help determining affordable solutions to your system’s maintenance requirements, call on KEG for innovative products and services. We’ve been there, we can help. We can also assist you with training and field testing of your equipment to make sure your jetter or combination truck fleet is up to the task. Storm water means big pipe. Big pipe can have big problems. KEG’s professionals can help you bring these big problems under control and show you how to do more with limited resources.

Floor Cleaner 14 jet

16

KEG has long been a leader in developing products for the storm water market. As Federal requirements or greater storm water system monitoring and maintenance grow, storm water departments are facing more and more demands on their budgets, manpower, and expertise. The collection systems professionals have for years been on the cutting edge of cleaning product development, camera and documentation systems. Those departments have also had the budgets through user fees to afford equipment and personnel. Now, storm water professionals are being called upon to do more regarding the maintenance of their systems, and usually with fewer financial resources and often less experienced personnel.

Storm Water Infrastructure – Evolution of Maintenance Requirements

www.kegtechnologies.net

FLOOR CLEANER FAMILY

KEG-Patented Fluid Mechanics Design “Jets” Away Debris

Utilizing KEG’s patented fluid mechanics, our 5 to 14 jet floor cleaners provide truly superior cleaning efficiency in large diameter pipes. Superior to other bottom nozzles in both fluid mechanics and jet angle design, our floor cleaners put the pump’s power on the floor of larger diameter pipes - where the debris is!

Superior Design Equals Superior Performance

Due to our patented fluid mechanics, the flow from the high pressure water hose is converted to maximum cleaning power from each jet. The resulting flow from the various jets, as well as the jet angle design make these floor cleaners ideal for removing sludge, mud, and other compacted materials and heavy debris (rocks, bricks, broken concrete, etc.) from storm lines, detention systems, culverts, and large sanitary lines. KEG’s unique roll cage design also ensures that our floor jet cleaner will return to its upright position to perform as designed. KEG’s Floor Cleaners feature our patented fluid mechanics and are Tier Three nozzles.

Advantages:

self righting design weight port for high flow conditions reduced operating costs high efficiency cleaning superior water pattern design

Applications:

SANITARY, STORM heavy or compacted solids, debris removal of sludge tandem applications (box culverts) high pump flow applications

K E G F L O O R C L E A N E R F A M I L Y

Part Number

Recommended flow rates

Number of Inserts

Weight (pounds)

Pipe Size

100125 from 80 14 51.0 from 20"

100124 65 to 120 12 48.5 from 16"

100123 50 to 80 10 39.6 from 12"

100122 30 to 80 8 26.4 from 10"

100121 30 to 60 6 22.0 from 8"

100120 18 to 40 5 19.0 from 4"

Please indicate "-C" for ceramic inserts or "-S" for steel inserts after each part number.

Floor Cleaner family


Advantages:

wide water pattern dual water feed capabilities complete package incl. all fittings

Applications:

Box culverts large diameter storm lines large diameter sanitary lines

“The Twins” Floor Cleaners Efficient cleaning of big bore, high debris pipe

K E G T W I N F L O O R C L E A N E R S

Part Number

Description

Recommended

flow rates application

and diameters

100121-T 100122-T

2 ea. 6 jet floor cleaner 2 ea. 8 jet floor cleaner

60+ GPM 80+ GPM

from 48" round pipe from 60” round pipe

100123 T 100124-T 100125-T

2 ea. 10 jet floor cleaner 2 ea. 12 jet floor cleaner 2 ea. 14 jet floor cleaner

100+ GPM 120+ GPM 120+ GPM

from 72”" round pipe from 84” round pipe from 84” round pipe

100184

45 and 90 degree

angle adapters

Various

The flow angle Adapter creates a wider water pattern on the

outside jets of the floor cleaner.

Twin Floor Cleaner with Y-Connector

18

KEG is pleased to introduce “ The Twins” floor cleaners. Utilizing two floor cleaners with KEG patented fluid mechanics, working in tandem plus a Y - connector and other fittings, “The Twins” allow the crew the ability to clean large box culverts, arch pipe, or large diameter round pipes in a more efficient manner. “The Twins” can utilize any KEG Floor Cleaner pair depending on flow and pressure available, units run parallel in a large diameter pipe. By using spacer bars and dual water feed lines, the twin units provide a uniform cleaning pattern over a wide diameter. For more information on how “The Twins” can make your big diameter cleaning projects more productive, contact us.



KEG Technologies holds three (3) U.S. patents for fluid mechanics and/or video

and cleaning combination unit. Our patents are U.S. Patent #5.992.432,

U.S. Patent #6.089.243, and U.S. Patent ##6.138.697.


KEG penetrating nozzles are designed to handle the toughest clogs and obstructions

When the toughest clogs and obstructions are encountered in a sewer line, KEG recommends any of our high performance penetrating nozzles for the task at hand. For total blockages caused by roots, grease or other impediments to flow, choose one of our penetrating nozzles available in sizes from .25” to 1.25”.

PENETRATING NOZZLE FAMILY

Triple Edge Quattro nozzle

The Triple Edge Quattro nozzle is an excellent penetrating nozzle for a variety of applications. Deformed pipes, roots or other blockages inevitably yield to this high performance nozzle. The combination of four forward jets and sharp edges of the Triple Edge Quattro make it an ideal selection for total blockage removal.

Drill Point Quattro nozzle-for total line blockages

The Drill Point Quattro is a terrific tool for removing total line blockages. The stainless steel drill tip penetrates the toughest clogs, particularly grease blockages. The 3 jets pre-drilled in the changeable tip then enlarge the opening in the clog, working with the sharp, tapered edges of the Drill Point Quattro. The loosened debris is then washed down the line by the propulsion jets at the back of the Drill Point Quattro. For low maintenance, high performance penetrating nozzle, the Drill Point Quattro is hard to beat. The Drill Point Quattro is classified as a Tier One or Tier Two nozzle depending on the size and the availability of replaceable inserts.

Rambo Nozzles – Three nozzles in One

The Rambo Nozzle shares its name with a very “dangerous” warrior of the big screen. However, even the famous movie hero would be hard pressed to emulate the success this nozzle has in removing its “enemies”. The Rambo nozzle combines the best characteristics of all penetrating nozzles into a maximum performance, maximum clog busting nozzle. The three jet drill point penetrates the toughest obstructions. Then the forward jets work to open the clog even farther. Finally, the sharp edges of the Rambo nozzle are propelled through the clog, breaking the obstruction open and forcing the debris down the pipe line for removal by the rear thrusting jets.


TRIPLE EDGE QUATTRO NOZZLES reliable obstruction removal with forward jets and sharp edge design

The Triple Edge Quattro is an excellent penetrating nozzle for most tough clogs. It is also dynamic in sand and trash that might be encountered in the pipe cleaning process. Triple Edge Quattro nozzles are manufactured from hardened stainless steel and are available with steel or titanium ceramic inserts.

Advantages: forward jets chisel design replaceable threaded inserts wide range of thread inserts Applications: SANITARY total blockages deformed pipes pipes from 2” and up Tier One or Tier Two nozzle

Triple Edge Quattro Family

Specifications:

High pressure forward jets combined with a sharp, chiseled edge provide excellent penetration of sewer clogs.

K E G T R I P L E E D G E Q U A T T R O N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100060 1.25" 10 5.0 from 4"

100058 1.00" 9 1.5 from 4"

100056 0.75" 9 1.0 from 3"

100054-S 0.50" factory 0.4 from 3"

100050-S 0.38" factory 0.4 from 2"

100052S 0.25" factory 0.3 From 2"


23


DRILL POINT QUATTRO NOZZLES penetrating ability and traction characteristics for tough clogs

The Drill Point Quattro nozzle is an excellent choice for the operator faced with grease blockages in a line. The drill point with three jets within the tip itself will effectively penetrate almost any clog and begin the process or breaking down the clog. The excellent thrust characteristics of the nozzle then propel the sharp edges of the Drill Point Quattro through the blockage and restores flow.

Advantages: removal of obstructions replaceable drill point replaceable threaded inserts

Applications: SANITARY thrust and traction in heavy clogs pipes from 2” and up Tier One or Tier Two nozzle

Drill Point Quattro Specifications:

Sharp chisel-like edges and replaceable penetrating tip provide excellent clog removal.

K E G D R I L L P O I N T Q U A T T R O N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100061 1.25" 6 6.0 from 4"

100059 1.00" 6 1.5 from 4"

100057 0.75" 6 0.5 from 3"

100055-S 0.50" factory 0.4 from 3"

100051-S 0.38" factory 0.3 from 2"

100053-S 0.25" factory 0.2 From 2"



RAMBO NOZZLES high traction power, drill point and forward jet features

provide maximum clog removal

The Rambo is a unique nozzle in the sewer cleaning industry. KEG was the first to incorporate the traditional concepts of a wedge-shaped penetrating nozzle with a drill point. Adding to this is the Rambo’s thrust characteristics that simply won’t allow this nozzle to be stopped. KEG offers the Rambo in different hose diameter sizes beginning with .38”. The Rambo can be configured with steel or titanium ceramic inserts.

Advantages: 3 nozzles in one replaceable drill point replaceable threaded inserts maximum penetration and clog removal

Applications: SANITARY, STORM total blockages penetration of roots, grease, mud, ice and sand Tier One and Two nozzle

Specifications: High pressure forward jets combined with a sharp, chiseled edge and a drill point provide excellent penetration of sewer clogs.

Rambo nozzle family

K E G R A M B O N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100064 1.25" 10 5.5 from 6"

100063 1.00" 10 5.5 from 4"

100065 0.75" 9 4.5 from 3"

100066-S 0.50" factory 2.1 from 3"

100067a-S 0.38" factory 0.3 from 2"

100067-S 0.25" factory 0.2 From 2"



CLEANING NOZZLE FAMILY

A variety of nozzles for cleaning applications For small residential applications, our Ball or Standard nozzles are efficient, cost effective tools for cleaning sewer lines. KEG’s Forward jet nozzle is ideal for working blockages away from the home towards the sewer main. KEG also offers the Sewer Flush nozzle, an excellent mid-efficiency, mid-priced Tier Two nozzle . For jobs where a tight water pattern is needed to remove sand or mud, our Traction nozzle is recommended. For larger sewer cleaning power, our Torpedo or Royal nozzles perform the toughest cleaning jobs.

Standard Nozzle Ball Nozzle

Ball and Standard nozzles

Ball and Standard Nozzles (pictured above) are KEG’s Tier One nozzles that come with factory drilled orifices. For small, residential applications, these nozzles are typically used. Ball and Standard nozzles have a one year warranty. KEG’s Ball nozzles are suitable for 1” to 6” pipes, and fit a 3/8”, 1/4” or 1/2” hose. Standard nozzles fit 1/4” to 1 1/4” hoses and will work effectively in 2” to 12” lines.

Forward jet nozzle Available in 1/2” configurations, the Forward Jet (pictured at right) has seven inserts. All water is pushed forward out of the nozzle, toward the clog or obstruction, and away from the home. Available in 15GPM, 20 GPM, or 30 GPM configurations. Technique for using the Forward Jet: The operator should feed the hose into the service lateral by hand, activate the jetter, then force the clog toward the sewer main. When the forward jet returns to the cleanout, shut down the water; repeat the process until the service lateral is clear.

Forward jet Nozzle


STANDARD NOZZLES routine cleaning applications

The Standard Nozzles are maneuverable, small nozzles suitable for residential sewer cleaning applications.

Advantages:

optional forward jet wear resistant cost competitive

Applications:

SANITARY residential applications cost competitive cleaning Tier One nozzle

Standard Nozzle

K E G S T A N D A R D N O Z Z L E

Part Number

Hose Size

Weight (pounds)

Pipe Size

100094 1.25" 1.7 5" to 12"

100092 1.00" 0.9 4" to 10"

100090 0.75" 0.7 4" to 8"

100088 0.50" 0.3 3" to 6"

100084 0.38” 0.1 2” to 4”

100086 0.25" 0.1 2" to 4"

Please indicate "-S" for steel forward jet insert after each part number –all replaceable forward jet nozzles now come with an additional blank steel insert included.

BALL NOZZLES routine cleaning applications

K E G B A L L N O Z Z L E

Part Number

Hose Size

Weight (pounds)

Pipe Size

100117 0.5" 0.2 from 3"

100113 0.38" 0.1 from 2"

100113 0.25" 0.2 from 1"

Please indicate "-S" for steel forward jet insert after each part number – all replaceable forward jet nozzles now come with an additional blank steel insert included.

Ball Nozzle


The Ball Nozzle has rounded edges for easy maneuverability and ideal for cleaning service laterals.

Advantages: • Optional forward jet • Wear resistant • Cost competitive • Rounded edges

Applications: • SANITARY • Residential applications • Cost competitive

cleaning • Tier One nozzle • Lateral cleaning

FORWARD JET NOZZLES for cleaning of residential services and other lines where a one directional

flow or water and debris is beneficial and/or necessary

The Forward Jet Nozzle is a maneuverable, small nozzle suitable for residential or other sewer cleaning applications. This nozzle is appropriate for jobs where moving debris away from the residence or business and avoiding debris backup is essential.

Applications:

SANITARY residential applications cleaning laterals cleaning services Tier One nozzle

K E G F O R W A R D J E T N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100118 0.5" 7 0.2 from 3"

The Forward Jet nozzle uses 7 inserts and comes pre-configured for 15 gpm, 20 gpm or 30 gpm. 700 psi is the recommended maximum pressure.

The Forward Jet Nozzle should be fed manually by the operator into the service line, from the cleanout at the residence toward the blockage. Next, the hose should be charged to pressure and the clog or obstruction should be pushed away from the residence to the sewer main. Repeat this process as necessary until the blockage is removed from the service lateral.

Forward jet Nozzle

Advantages:

replaceable jets moves debris away from the residence cost effective no backflow into the house


EGG NOZZLES This nozzle is an upgrade from the Standard nozzle, instead of drilled jets, it comes with

replaceable inserts. Also light and agile all round nozzle with replaceable insert

Advantages: with forward jet wear resistant cost competitive stainless steel 15* or 30* angles Replaceable inserts (ceramic or steel inserts)

Applications: SANITARY residential applications Tier Two nozzle

Standard Egg Nozzle

K E G E G G N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100215 1.25" 1 forward, 4 rear 2.6 from 8"




100210-S 0.25" 1, factory 0.4 from 1"

100211-S 0.38" 1, factory 0.4 From 1"

Please indicate "-C" for ceramic inserts or "-S" for steel inserts after each part number. All replaceable forward jet nozzles now come with an additional blank steel insert included.


Specifications: Made of Hardened Stainless Steel 300 Series

K E G E G G D E V A S T A T O R N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100223 1.25” 7 (3 rear, 4 forward) 1.1 from 4"

100222 1” 7(3 rear, 4 forward) 1.1 from 4"

100221 .75 7(3 rear, 4 forward) 0.7 From 3”

100220 .50 7(3 rear, 4 forward) .40 from 2"

100219-S .375 7 (3 rear, 4 forward) .40 from 2"

Please indicate "-C" for ceramic inserts or "-S " for steel inserts after each part number.

Egg Devastator Nozzle

Contact KEG to learn about the advantages of our brand new DEVASTATOR Egg-nozzle.

www.kegtechnologies.net 30

EGG DEVASTATOR NOZZLES

Light and agile all around nozzle with replaceable inserts

Advantages: • With forward jet • Wear resistant • Cost competitive • Stainless steel • 30* angles • Replaceable inserts (ceramic or steel)

Applications: • SANITARY • Residential applications • Tier Two nozzle • Service lines as well as mains



Sewer Flush nozzle – economy plus superior performance

KEG is pleased to have the Sewer Flush nozzle in our family of products. The Sewer Flush is intended for those customers who need a nozzle that provides superior cleaning results while being more cost competitive. The Sewer Flush is available with replaceable steel or titanium ceramic inserts and is an excellent mid-range complement to the other products in KEG’s Cleaning nozzle family. The Sewer Flush is a Tier Two nozzle.

Royal Nozzle - maximum cleaning power in large diameter pipes The “heaviest weapon” in KEG’s cleaning nozzle family is the Royal nozzle. With 12 jets at 22° and 32°, the Royal nozzle is designed for pipes up to 48” in diameter. As the Royal weights in at almost 17 pounds, it will usually stay on the bottom of the pipe for effective cleaning when other nozzles are flailing about wasting water. Featuring KEG’s patented fluid mechanics, the Royal offers extreme 360° cleaning in large pipes. The 12 insert set-up can be configured in steel or titanium ceramic inserts. The Royal is a Tier Three nozzle, features KEG’s highest performing fluid mechanics and is over 95% efficient!

Torpedo Nozzle – maximum cleaning power in sanitary and sewer applications With its aerodynamic shape and hefty mass, the Torpedo Nozzle does indeed resemble something fired by the US Navy. Utilizing KEG’s patented fluid mechanics, the Torpedo will stay in the bottom of a pipe, providing steady, high efficiency pipe cleaning. Due to the patented fluid mechanics of the Torpedo, 95% plus fluid efficiency is achieved. Suitable for pipes from 6” to 16”, KEG’s Torpedo returns extreme cleaning power and uses less water, less fuel and fewer man-hours than other cleaning tools. Torpedo nozzles have the option of steel and titanium ceramic inserts also. This ceramic configuration affords the Torpedo Nozzle a 3 year warranty. Our mighty Torpedo is a Tier Three nozzle.

Royal Nozzle

Torpedo Nozzle

Sewer Flush Nozzle



Traction Nozzles for Intense Cleaning When an extremely tight water pattern is needed for intense directed cleaning and propulsion, few nozzles perform as well as KEG’s traction nozzle. With 8° and 12° angled jets, the Traction nozzle will provide tremendous thrust and highly efficient cleaning utilizing KEG’s patented fluid mechanics. An optional forward penetrating jet can turn the Traction into an efficient penetrating nozzle also. When difficult cleaning jobs require efficiency, maneuverability and the ability to blast sand or mud, the Traction nozzle is up to the task. The Traction is a Tier Three nozzle that features KEG’s patented fluid mechanics.

Traction Nozzle

Cleaning nozzles for efficient cleaning KEG’s Cleaning Nozzle is a high-efficiency nozzle suitable for all around cleaning of 4” to 16” lines. Utilizing 8 threaded inserts with angles of 15° and 25°, or the wide angle version with 25 and 40 degree jets, the Cleaning nozzle will give the operator efficiency above 80%. These efficiencies get the cleaning job done and will save the operator time, water and fuel. Because the Cleaning nozzle is made of hardened 400 series stainless steel, this nozzle will be a tough, dependable cleaner handling years of tough cleaning jobs. The Cleaning nozzle is also available in the smaller 3/8” size as well, providing high efficiency cleaning for jetter trailer and flusher truck applications. The Cleaning is a Tier Three nozzle featuring KEG’s patented fluid mechanics.

Sewer nozzle – cleaning for large diameter pipes Available for hoses from from ¾” through 1 1/2”, KEG’s Sewer nozzle is truly a “heavy weight” in the sewer and storm water cleaning industry. The Sewer ranges from 17 to 22 pounds in weight and provides as many as 12 threaded nozzle inserts for a maximum cleaning pattern in larger diameter pipes. Utilizing patented fluid mechanics the Sewer nozzle is excellent for cleaning pipes from 6” through 24”. As with most of KEG’s nozzles, the addition of titanium ceramic inserts gives the Sewer nozzle a 3 year warranty on the nozzle body and a 5 year warranty on the inserts. The Sewer is a Tier Three Nozzle.

Cleaning Nozzle

Sewer Nozzle

SEWER FLUSH NOZZLES excellent efficiency for competitive price

KEG’s Sewer Flush Nozzle is a heavy duty cleaning nozzle designed for standard maintenance cleaning. Also, the power of the Sewer Flush with 15 and 20 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer Flush is a Tier Two nozzle.

Advantages: 15° and 25° jet angles cost competitive replaceable threaded inserts high wall force cleaning

Applications: SANITARY, STORM general sewer cleaning pipes up to 24” Tier Two nozzle

Sewer Flush Nozzle Specifications:

Excellent performance provides efficient cleaning with lower first costs.

Sewer Flush Nozzle

K E G S E W E R F L U S H N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100104 1.25" 10 22.0 from 8"

100103 1.00" 10 15.0 from 8"

100102 0.75" 8 15.0 from 6"

100101 0.50" 5 0.8 from 4"

100100-S 0.25" factory 0.4 from 3"

100098-S 0.38" factory 0.4 from 3"



TRACTION NOZZLES tight water pattern for efficient cleaning

The Traction Nozzle is an excellent multi-purpose nozzle. The Traction is highly-efficient in cleaning damaged pipe without causing further damage. The Traction is also the first nozzle used in heavy debris applications to create the pathway for other KEG nozzles. The Traction is available in 3/8”, giving the operator fluid mechanics not normally found in small nozzles. The Traction’s forward jet can be blocked if the customer does not wish the forward penetrating action. US Patent #US 5.992.432.

K E G T R A C T I O N N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100017 1.25" 7 6.0 4" to 12"

100015 1.00" 7 3.2 4" to 10"

100013 0.75" 7 2.5 3" to 8"

100011 0.50" 7 0.6 2" to 6"

100009 0.38" 7 0.6 2" to 6"

Please indicate "-C" for ceramic inserts or "-S" for steel inserts after each part number – all replaceable forward jet nozzles now come with an additional blank steel insert included.

Advantages: penetrator or cleaning nozzle 80%+ efficiency 8° and 12° jet angles extended warranty available clears pathway for other nozzles

Applications: SANITARY, STORM mud and sand removal deterioration or cracked pipes Tier Three nozzle

Traction Nozzle Specifications:

Patented fluid mechanics provide superior performance for mud and sand removal.

Traction Nozzle


CLEANING NOZZLES excellent efficiency for general purpose cleaning

The Cleaning Nozzle is an everyday workhorse nozzle. With its wider 15/25 or optional 25 and 40 degree jet pattern, the Cleaning provides excellent wall force to remove debris from pipe walls that other “cleaning type” nozzles might have missed. KEG’s Cleaning Nozzle is also available in 3/8” and ½” configurations, giving the small jetter operator the advantage or fluid mechanics not normally available in other 3/8” nozzles. US Patent #US 5.992.432.

Advantages: 15° and 25° jet angles 80%+ efficiency replaceable threaded inserts high wall force cleaning less air draw

Applications: SANITARY, STORM general sewer cleaning pipes up to 16” Tier Three nozzle

Cleaning Nozzle Specifications: Patented fluid mechanics provide superior performance for mud and sand removal and general cleaning application.

K E G C L E A N I N G N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100003 1.00" 8 6.6 4" to 16"

100002 0.75" 8 4.4 4" to 12"

100001 0.50" 8 0.9 3" to 8"

100004 0.38" 7 0.7 3" to 8"


Cleaning Nozzle



The Cleaning Nozzle also is available in a wide angle. This nozzle has all the advantages of the 15/25 degree but with wider 25/40 degree jet pattern, it gives the capability of cleaning pipes up to 40”.

The Cleaning Nozzle is an everyday workhorse nozzle. With its wider 25/40 degree jet pattern, the Cleaning provides excellent wall force to remove debris from pipe walls that other “cleaning type” nozzles might have missed. Best application for this nozzle is shallow lines that have blow back and heavy grease. US Patent #US 5.992.432.

Advantages: 25° and 40° jet angles 80%+ efficiency replaceable threaded inserts high wall force cleaning less air draw


Cleaning Nozzle Specifications: Patented fluid mechanics provide superior performance for mud and sand removal and general cleaning application.

K E G C L E A N I N G N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

101103 1.00" 8 6.6 4" to 40"


Wide Angle Cleaning

SEWER NOZZLES excellent efficiency for larger sanitary and storm lines

KEG’s Sewer Nozzle is a heavy duty cleaning nozzle designed for heavy debris cleaning. The Sewer can weigh as much as 26 pounds and will stay centered in the bottom of the pipe for effective cleaning. Also, the wide cleaning power of the Sewer with 15 and 20 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer is a Tier Three nozzle featuring KEG’s patented fluid mechanics design, and is available with steel or titanium ceramic inserts. US Patent #US 5.992.432.

Advantages: 80%+ efficiency 15° and 20° jet angles replaceable threaded inserts high wall force cleaning


Sewer Nozzle Specifications:


Sewer Nozzle


K E G S E W E R N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100043 1.50" 12 22.0 6" to 24"

100042 1.25" 12 22.0 6" to 24"

100041 1.00" 10 17.6 6" to 18"

100040 0.75" 10 17.6 6" to 16"


TORPEDO NOZZLES extreme pipe cleaning power with highest fluid mechanical efficiency

The Torpedo is KEG’s flagship nozzle, with our highest fluid mechanics design. The Torpedo will provide unequalled cleaning power for the operator, saving fuel, water, and man-hours as well. Our customers depend on the Torpedo as one powerful cleaning tool that pays for itself over and over again. Because the Torpedo is a Tier Three nozzle, KEG can configure this fantastic cleaning tool to meet the particular parameters of your truck, jetter, or cleaning application. US Patent #US 6.089.243.

Advantages: extreme cleaning power 95+% efficiency 12° and 18° jet angles maintains a centered position in the pipe saves time and water

Applications: SANITARY, STORM all around cleaning good traction required heavy debris removal Tier Three nozzle

Torpedo Nozzle Specifications:


Torpedo Nozzle

K E G T O R P E D O N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100033 1.50" 8 14 6" to 16"

100032 1.25" 8 14 6" to 16"

100031 1.00" 8 14 6" to 16"

100030 0.75" 8 14 6" to 16"



ROYAL NOZZLES extreme cleaning power for large diameter pipes

The Royal features KEG’s “upper efficiency” patent for fluid mechanics (as does the Torpedo). Excellent cleaning in large diameter pipes is the Royal’s specialty. With a wide jet pattern, the Royal will do a total pipe clean in large diameter sanitary and storm lines. US Patent #US 6.089.243.

Advantages: 95+% efficiency replaceable threaded inserts 22° and 32° jet angles high wall force in large diameter pipes

Applications: SANITARY, STORM general sewer cleaning heavy debris removal pipes up to 48” Tier Three nozzle

Royal Nozzle Specifications:


Royal Nozzle

K E G R O Y A L N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100023 1.50" 12 17.6 12" to 48"

100022 1.25" 12 17.6 12" to 48"

100021 1.00" 12 17.6 12" to 48"

100020 0.75" 12 17.6 12" to 48"




Aluminum Nozzles

The Aluminum Nozzle are lighter to handle and have the same great advantages and applications as the our nozzles made of Stainless Steel. The nozzles are available in Cleaning, Traction, Torpedo, and Royal.

KEG’s recommends using a centering device with our Aluminum line of nozzles to ensure maximum performance and protect from premature wear. Our standard warranty applies if used as recommended.

K E G A L U M I N U M N O Z Z L E

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

107003 1.00” 8 2.15 4” to 16”

107015 1.00" 6 rear, 1 front 1.25 4” to 10”

107021 1.00” 12 7.2 12” to 48”

107031 1.00” 8 5.2 6” to 16”


FINISHING NOZZLE FAMILY

KEG’s Rotor Nozzle Provides the Finishing Touch

When contractors or municipalities "finish" a pipe cleaning job, they often view "streaks" on the pipe walls during their video inspection. These "streaks" are actually grease residue that has not been removed by the other cleaning processes. KEG offers our Rotor Nozzle for this purpose. The free spinning Rotor will remove those last grease deposits, along with tender roots and other vegetation, to "ensure perfect pipe cleaning and a finished job", hence our finishing label.

Rotor Nozzles - A 360° Maintenance Tool Rotor nozzles run the gamut of pipe size applications, ranging from 1/4" to 1 1/4" hose threads, and from 4" to 18“ pipe. The unique nozzle insert configuration provides both propulsion and a rotating body action. This rotation ensures that pipes are thoroughly cleaned in all 360° of the pipe surface. Though primarily intended for grease removal, the Rotor Nozzle is equally adept at removing scaling, crusts, and small root tendrils and other tender vegetation. Maintenance simply requires removal of the top cap and cleaning of the rotational shaft; this can be done in a matter of minutes. No bearings to oil or lubricate and no repair kits to install! Remember, the Rotor Nozzle should be the last nozzle up the pipe before TV inspection! KEG's Rotor Nozzles are available with steel or titanium ceramic inserts. Our Rotors are classified as Tier Two nozzles.

Rotor Nozzle Family


ROTOR NOZZLES To Ensure Perfect Pipe Cleaning Before Inspection

KEG’s Rotor Nozzles are an excellent tool for complete pipe cleaning. It should be noted, however, that a Rotor is NOT a cleaning nozzle and should not be used in cleaning applications. Rotors are intended to remove the grease and sludge that remain in lines after an 80 percent cleaning has been accomplished. This sludge is the adhesive for the next clog to begin. KEG Rotor Nozzles are made with our unique water driven design and requires No Form of lubrication for maintenance and operation. Don’t use grease, oils, or other lubrication when performing maintenance on this nozzle. KEG Rotor Nozzles are Tier Two nozzles.

Rotor Nozzle 1”

K E G R O T O R N O Z Z L E S

Part Number

Hose Size

Number of Inserts

Weight (pounds)

Pipe Size

100074 1.25" 9 12.0 6" to 20"

100073 1.00" 9 10.0 6" to 20"

100072 0.75" 8 6.5 4" to 12"

100071 0.50" 7 1.0 3" to 10"

100069 0.38" 4 0.7 2" to 8"

100070 0.25" 4 0.7 2" to 6"


Advantages: high rotational speed no lubrication required replaceable threaded inserts reversible rotating barrel

Applications: SANITARY grease and scale removal roots and vegetation finishing before video inspection

Rotor Nozzle Specifications:

Removal of grease, roots, and scale before TV inspection provides perfect sewer cleaning.


Hydro Excavation Nozzle

Part Number Hose Size Number of Inserts Names of Nozzles Weight

(pounds)

100320-C-X ½” 1 front 4 rear Twister 2.25

100321-C-X ¾” 1 front 4 rear Twister 2.25

To order, call toll free 1-866-595-0515

43

Twister Nozzle excellent for digging

Rotating/Penetrating Nozzle

Twister Nozzle

Advantages: • Excellent for Hydro excavating and

cleaning lines • Twister oscillating front jet • Stainless steel body • Replaceable ceramic inserts for

propulsion jets



Part Number Hose Size Number of Inserts Names of Nozzles Weight

(pounds)

100054-HX ½” 4 front Triple Edge Quattro .40

Advantages: • Excellent for Hydro excavating and cleaning lines • Replaceable front jets • Stainless steel body • Can be used from 4 gpm to 25 gpm • Strictly for Hydro Excavation


Hydro Excavation Nozzle excellent for digging

Ejector Nozzle Part No. 0080 0199 for sewer pipe from 10 inch HP connection 1“ inner thread 6 nozzle inserts length/width/height: 12.6/7.1/7.1 weight: 22.25 lbs.

Suitable for cleaning water bearing pipes only The special arrangement of the nozzle inserts results in the “soft“ cleaning effect, which make the Ejector Nozzles suitable for cleaning older sewer networks. They use the available water flowing in the sewer to aid the water coming from the pressurized hose thus utilizing the advantages of both cleaning methods.

Especially suitable for culvert cleaning

Ejector Nozzle for large diameter pipes Part No. 0080 0200 for sewer pipe from 16 inch HP connection 1“ inner thread 6 nozzle inserts length/width/height: 16.5/10.25/8.7 weight: 46.25 lbs.

Ejector Nozzle for large diameter pipes Part No. 0080 0201 for sewer pipe from 24 inch HP connection 1 ¼“ inner thread 10 + 2 nozzle inserts length/width/height: 19.3/12.6/10.6 weight: 57.25 lbs.

Used in connection with high pressure Jetters For sludge suction at discharge heads of more than 26 ft. to aid the vacuum pump and in combination with the high pressure pump. The suction hose couplings are screwed to a 1” thread. It is therefore possible to use different coupling systems; HP connection with 1“ union nut Part No. 0080 0210

The ejector serves as a device to fill high pressure jetter tank from open water reservoirs, which reduces the consumption of drinking water. It is powered from the high pressure pump of the sewer jetter. Place the ejector in water and start the high pressure pump. Make sure that a minimum quantity of water of approx. 50 gallons still available in the jetter tank. Part No. 0080 0220

Deep-Sucker Ejector

Filling Device for High Pressure Jetters:

Available also as a strainer

Stainless Steel Ejector Nozzles for Large Sewer Pipes

Ejector Nozzles


CUSTOMER-KITS AND PACKAGES

KITS - Nozzles for all applications And in various combinations.


KEG offers several kits of many varies sizes. The kits are intended to give the customer options. But we strive to accommodate our customers needs and customize the kits to fit your job. Our customized kits are at least four nozzles and a case and it must include a Torpedo and Rambo as two of the four nozzles.

CUSTOM BUILT KITS


Starter kits (includes nozzles and a case):

Tier 3 nozzle starter kit • Cleaning • Traction • Rambo

Tier 2 nozzle starter kit • Sewer Flush • Triple Edge Quattro (TEQ) • Egg

Basic kits (includes nozzles and a case):

½” basic kit • Cleaning • Traction • Rambo or TEQ

3/4” and 1” basic kit • Cleaning • Traction • Torpedo • Rambo

Sanitary kits (includes nozzles and a case):

½” Santi kit • Cleaning • Traction • Rotor • Rambo

¾” and 1” Santi kit • Torpedo • Traction • Rambo • Cleaning • Rotor


CUSTOM BUILT KITS

KEG offers several kits of many varies sizes. The kits are intended to give the customer options. But we strive to accommodate our customers needs and customize the kits to fit your job. Our customized kits are at least four nozzles and a case and it must include a Torpedo and Rambo as two of the four nozzles.

Storm kits (includes nozzles and a case):

¾” and 1” Storm kit • Torpedo • Traction • Rambo • Sewer • Royal

Complete kits (includes nozzles and a case):

½” Complete kit • Cleaning • Traction • Rotor • Rambo or TEQ • Forward

1” Complete kit • Cleaning • Traction • Rotor • Rambo • Torpedo • Royal

Leader Hoses and Tiger Tails


Leader Hoses: • ½”, ¾” and 1” sizes • 5 Ft increments of various lengths

Tiger Tails: 3” x 36” heavy duty hose protector with rope

Comments/Notes: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Contacts By Region

General Manager: Dennis Farhat [email protected]

General Sales Manager: Dan Story 904-502-6009

[email protected]

International Product Specialist: Ken Billingham 206-310-3511 [email protected]

Northern Regional Manager: Geoff Baumes 262-960-5226

[email protected]

Southern Regional Manager: Louis Morgan 225-610-4052 [email protected]

Office Manager: 1-866-595-0515 ext. 0 [email protected]

Contact your local

Expert!







Authorized Reseller

2016 Product Catalog REV: 02.02.2015

6220 North Pinnacle Drive Spartanburg, South Carolina 29303

United States of America

Toll-Free Phone: 1-866-595-0515 Email: [email protected]


KEG Technologies, Inc.

Documents

Transcript of KEG Technologies, Inc.