KEEP UP WITH THE TOOLS OF YOUR TRADE WHILE KEEPING...
Transcript of KEEP UP WITH THE TOOLS OF YOUR TRADE WHILE KEEPING...
KEEP UP WITH THE TOOLS OF YOUR TRADEWHILE KEEPING SAFETY IN MIND
2019 PRODUCT CATALOG
ABOUT GLOVE GUARD, LPRETURN ON INVESTMENTGLOVE CLIPS
Glove Guard®Handi Klip®Utility Guard®Glove Catcher®Metal Detectable
CORD MANAGEMENTOktoLock®Utility Catcher®CableSafe® Cable RailCableSafe® Safety Hooks
HARD HAT ACCESSORIESGoggle Guard®HeadlampAccessory KitHat Grabber®
UTILITY BAGS™ TOTESCustom BagsHalf Mask RespiratorFull Mask RespiratorOpen MeshSoft PouchEyeglass
HEAT STRESSUVeto™ Sun GloveUVeto™ Attach-A-FlapUVeto™ Brim 'N ShadeUVeto™ Kalahari HatUVeto™ Le Work HoodUVeto™ Gobi Over HatUVeto™ Kala Hat
KEWLLID® COVERBOTTLECHOCK® RESTRAINTSAFETY SOLUTIONS
Glove Rings® AccessoryPower Band™Derma GuardPull-A-Way™ Lanyard
IMPRINTINGCustom ImprintsStandard Safety Slogans
1233344455566777788899
101010111111121213131314151818181919202021
TABLE OF CONTENTS
ABOUT GLOVE GUARD LP
Glove Guard LP is committed to providing quality products that meet the basic needs of keeping up with required personal protective equipment. Located in Highlands, Texas, USA, all of the Limited Partners have been with the Glove Guard® product since its inception. Glove Guard LP was founded in August 1999 and maintains a strong commitment to manufacturing products that improve working conditions and promote safety on the jobsite.
Our strategy has been to listen to people as they’ve shared their needs for specific solutions. In response, we have developed, adapted, and manufactured unique products to meet those needs. As we commence our next 20 years, we aspire to continue to listen, innovate, and manufacture unique solutions.
Glove Guard LP has a dedicated staff of personnel who genuinely care and are ready to assist both direct and indirect customers, yet we only sell through distribution. We manufacture products but aim never to lose sight of people.
1
3. Use of Glove Guard® products along with a company’s safety incentive program combines the dollars spent with tools that help accomplish the safety goals.
Major companies are using Glove Guard® products as safety incentives with their logo, safety program’s slogan, or one of our safety slogans to get their safety message across while providing a tool that actually helps accomplish the safety goals.
1. Use of Glove Guard® products reduces direct and indirect costs associated with hand injuries. If personal protective equipment is available, it will be utilized.
“Use of the Glove Guard® clip has enabled us to far surpass our initial expectations. It has become as common as hard hats and safety glasses. Recordable hand injuries have been reduced as much as 86%. Thanks for your continued support and assistance in making our site safer and more cost efficient.”
— Polymers Group, Mont Belvieu Plant
2. Use of Glove Guard® products reduces glove replacement costs and the costs associated with environmental cleanup. The redundant breakaway also provides a level of reduced liability.
In the Houston, Texas area, several general contractors on major building sites require Glove Guard® products for all contractors that work on the premises because they reduce glove loss and keep gloves readily available. The strong grip of the product ensures that the items stay attached instead of just falling off, and the redundant breakaway reduces the possibility of attached items pulling an employee into machinery.
“In the last 3 months, about 80% of the glove replacement cost is due to lost or misplaced gloves. Your product will help greatly reduce that number.”
— Darren Matthews
RETURN ON INVESTMENT
2
GLOVE CLIPS
GLOVE GUARD® CLIP
HANDI KLIP® CLIP
The Glove Guard® clip is the original glove clip that features a flexible 15 lb redundant safety breakaway. The strong, interlocking teeth of both the small and large ends provide a superior grip to clothing and attached items. The Glove Guard® clip is made from an engineered grade material that holds its memory, resists flex-fatigue, is non-conductive, and non-corrosive. To use, attach the small end to your belt loop or directly to clothing, and clip the large end to your gloves. Made in the USA.
Custom imprinting is available for this product. For more information please see page 20.
The Handi Klip® glove clip uses a ball & socket connection that can be reassembled if pulled apart. The connection also provides a 25 lb breakaway. The clip can withstand the brief flash temps of a fire, and the oversized jaws grip even the largest pairs of gloves. Made in the USA.
Custom imprinting is available for this product. For more information please see page 20.
PART NUMBER COLOR
1939BK BLACK
1939BL BLUE
1939PR PURPLE
1939RD RED
1939PK HIGH VIS PINK
1939YW YELLOW
1939HVYW HIGH VIS YELLOW
1939GT GRANITE
1939GN GREEN
1939LG LIME GREEN
1939OG OLIVE GREEN
1939OR BLAZE ORANGE
PART NUMBER COLOR
41000BK BLACK
42000BL BLUE
43100FRD FIRE RED
43700MR MAROON
43900PK HIGH VIS PINK
44100HVYW HIGH VIS YELLOW
46200SGN SIGNAL GREEN
48000OR BLAZE ORANGE
3
Glove Guard® Handi Klip® Utility Guard®
UTILITY GUARD® CLIP
GLOVE CATCHER® CLIP
METAL DETECTABLE CLIPS
The Utility Guard® glove clip contains the same features and robust design as the Glove Guard® clip but uses a belt clip instead of a small clamp to attach to the user. To use, slip the belt clip over your belt, pocket, or harness. Then attach your gloves or towel with the large clamp. Made in the USA.
Custom imprinting is available for this product. For more information please see page 20.
The Glove Guard®, Handi Klip®, and Utility Guard® glove clips are available molded entirely out of a metal detectable plastic to comply with food industry standards.
Custom imprinting is available for this product. For
more information please see page 20.
The Glove Catcher® clip is a simple, one-piece design that is a cost-effective way to keep your gloves close at hand. To use, slip the clip over a belt, squeeze to open the jaws, and then insert gloves. Made in the USA.
Custom imprinting is available for this product. For more information please see page 20.
PART NUMBER COLOR
7100BK BLACK
7200BL BLUE
7227PR PURPLE
7300RD RED
7339PK HIGH VIS PINK
7400YW YELLOW
7441HVYW HIGH VIS YELLOW
7500GT GRANITE
7600GN GREEN
7661LG LIME GREEN
7700OG OLIVE GREEN
7800OR BLAZE ORANGE
PART NUMBER COLOR
OMS GCBK BLACK
OMS GCBL BLUE
OMS GCGN GREEN
OMS GCOR ORANGE
OMS GCRD RED
OMS GCWH WHITE
OMS GCYW YELLOW
PART NUMBER PRODUCT
1939MD GLOVE GUARD® CLIP
7221MD UTILITY GUARD® CLIP
42100MD HANDI KLIP® CLIP
4
CORD MANAGEMENT
OKTOLOCK® CLIP
The OktoLock® clip is made in the USA out of a strong, durable, and flexible PC-ABS plastic capable of holding up to 75 lbs and resists flex-fatigue. Its unique latching design securely fastens cords, hoses, or cables to railings, pipes, scaffolds, or lifts. Designed with users in mind, the OktoLock® clip takes potential trip hazards and securely contains them in a safe, elevated location.
Custom imprinting is available for this product. For more information please see page 20.
The Utility Catcher® clip is a versatile catch-all for a variety of tools and PPE items. It can be worn on a belt, slid on a grid wall, or hung on a wall with the keyhole feature. The Utility Catcher® clip is perfect for cord management, ear muffs, larger gloves, hard hats, face shields, hoses, safety lanyards, and much more. Made in the USA.
Custom imprinting is available for this product. For more information please see page 20.
UTILITY CATCHER® CLIP
PART NUMBER COLOR
OMS UHCBK BLACK
OMS UHCBL BLUE
OMS UHCGN GREEN
OMS UHCOR ORANGE
OMS UHCRD RED
OMS UHCWH WHITE
OMS UHCYW YELLOW
PART NUMBER COLOR
OK0203BK BLACK
OK0203YW YELLOW
3”
2”
BottomLatch
TopLatch
5
CABLESAFE® SAFETY HOOKS
CABLESAFE® CABLE RAIL
CableSafe® Safety Hooks are an ultra-strong, easy to use cable management solution. The open-ended design allows for quick, one-handed installation, while the glass-filled polyester material provides up to a 340 lb load rating. The molded-in holes at each end allow you to secure the hook and cables with plastic cable ties.
CableSafe® Cable Rail provides the perfect solution to safely handling and managing cable runs in any industrial sector. The Cable Rail elevates and separates smaller cables by placing each one in its own groove. Its unique, reverse hook arrangement allows cables to be quickly loaded and unloaded. Cable Rail can be directly surface mounted with two screws or attached to poles and columns with its cable tie features. It is available in two sizes.
Part Number | CS-CR, holds five 12AWG cables up to 1/2" DPart Number | CS-CRHD, holds cables up to 1.25" D
CS-CRHD
PART NUMBER SIZE WEIGHT LOAD
INT CS06 6" 55 LBS (25 KG)
INT CS09 9" 77 LBS (35 KG)
INT CS12 12" 220 LBS (100 KG)
INT CS15 15" 340 LBS (155 KG)
6
The Goggle Guard® clip is a fast and convenient way to keep safety goggles or glasses securely held to a hard hat. The clip snaps to the brim of both full brim and ball cap style hard hats without any alteration or detriment to the hat. The Goggle Guard® clip also features a pencil clip that can hold No. 2, carpenter pencils, or any small to medium sized pen. Made in USA.
Custom imprinting is available for this product. For more information please see page 20.
The Headlamp Accessory kit allows the Goggle Guard® clip to also serve as a stable mounting point for a headlamp.
The HL3W Headlamp features a 3W 110 lumen LED, is IPX-5 water resistant, compact, lightweight, and visible up to 260 ft. Available as a stand alone product or as a complete kit with the Goggle Guard® clip and Accessory Kit.
GOGGLE GUARD® CLIP
HEADLAMP & ACCESSORY KIT
HARD HAT ACCESSORIES
Accessory Kit (Alcohol Prep Pad, O-ring, 2-Dual Lock, Foam Pad)
Goggle Guard® Kit (Accessory Kit, Goggle Guard® Clip)
Complete Headlamp Kit (Headlamp, Goggle Guard® Clip, Accessory Kit)
PART NUMBER COLOR
80200BL BLUE
80300RD RED
80400YW YELLOW
80510WH WHITE
PART NUMBER COLOR PRODUCT/KIT
81000ACCKIT ------------ ACCESSORY KIT
81200BL BLUE GOGGLE GUARD KIT
81300RD RED GOGGLE GUARD KIT
81400YW YELLOW GOGGLE GUARD KIT
81510WH WHITE GOGGLE GUARD KIT
HL3W ------------ HEADLAMP
HL3W81200BL BLUE COMPLETE HEADLAMP KIT
HL3W81300RD RED COMPLETE HEADLAMP KIT
HL3W81400YW YELLOW COMPLETE HEADLAMP KIT
HL3W81510WH WHITE COMPLETE HEADLAMP KIT
7
HAT GRABBER®
CUSTOM UTILITY BAG™
UTILITY BAG™ TOTES
The Hat Grabber® hard hat component offers you the most comfortable and secure way to wear a hard hat. Made from a soft, flexible plastic, the fingers gently hold onto your head allowing the hard hat to be adjusted for a loose, comfortable fit. Using the Hat Grabber® hard hat component reduces neck strain, headaches, and discomfort. To install, just wrap it around the suspension system and buckle together. Made in the USA.
Part Number | HG10
Need a bag that fits a specific application on your jobsite? We have designed many types of bags to fit the various needs of customers. Several have altered the bags to include company logos and carrying methods. If you are in need of a custom bag solution, please email us at [email protected].
8
If you are required to have a respirator on your person at all times, whether you use it or not, then this Utility Bag™ Half Mask Respirator Tote by Glove Guard LP is a great place to carry it. The tote keeps your respirator stowed until needed, while the adjustable belt allows you to carry the bag hands free. Made from a durable 1200D polyester fabric, the tote holds up to the most rigorous environments and helps keep the mask clean when not in use.
Part Number | UBHMR, 6" x 7.5" x 3"
Much like our Half Mask Respirator tote, the Full Mask tote also allows you to keep your mask properly stowed when not in use, thus increasing the longevity and the integrity of the mask. The 1200D polyester ensures that the face shield doesn't get any unwanted scratches, while the included adjustable belt makes carrying convenient and simple. Fits small, medium, and large full masks.
Part Number | UBFMR, 9" x 9.5" x 5"
HALF MASK RESPIRATOR TOTE
FULL MASK RESPIRATOR TOTE
9
OPEN MESH UTILITY BAG™
SOFT POUCH UTILITY BAG™
EYEGLASS UTILITY BAG™
The Soft Pouch Utility Bag™ tote is made of soft fabric with a drawstring closure and is perfect for safety goggles, flashlights, and water bottles. Each bag is equipped with a redundant safety breakaway, and is available with a small clip (GG) or belt clip (UG) for attachment.
The Eyeglass Utility Bag™ tote is a soft, formed, zippered case to hold your prescription glasses, safety glasses, or sunglasses while not in use. Each bag is equipped with a redundant safety breakaway, and is available with a small clip (GG) or belt clip (UG) for attachment.
The Open Mesh Utility Bag™ tote has an open weave design for visibility and breathability. Each bag is equipped with a redundant safety breakaway, hook and loop closure, and is available with a small clip (GG) or belt clip (UG) for attachment. The Open Mesh bag is perfect for gas monitors and hand tools up to 1.5 lbs.
* Select Utility Bag™ totes styles are available in non-breakaway versions. Please contact us for information and availability.
GG PART NUMBER UG PART NUMBER SIZE COLOR
UBMG3X5BK UBMU3X5BK 3" x 5" BLACK
UBMG3X5OR UBMU3X5OR 3" x 5" BLAZE ORANGE
UBMG5X8BK UBMU5X8BK 5" x 8" BLACK
UBMG5X8OR UBMU5X8OR 5" x 8" BLAZE ORANGE
UBMG7X10BK UBMU7X10BK 7" x 10" BLACK
UBMG7X10OR UBMU7X10OR 7" x 10" BLAZE ORANGE
GG PART NUMBER UG PART NUMBER SIZE COLOR
UBDG5X9BL UBDU5X9BL 5" x 9" BLUE
UBDG5X9YW UBDU5X9YW 5" x 9" HIGH VIS YELLOW
UBDG5X9OR UBDU5X9OR 5" x 9" HIGH VIS ORANGE
UBDG5X9LG UBDU5X9LG 5" x 9" HIGH VIS LIME GREEN
GG PART NUMBER UG PART NUMBER SIZE COLOR
UBZG EYEZIP UBZU EYEZIP 6" x 4" RED
UBZG EYEZIP BL UBZU EYEZIP BL 6" x 4" BLUE
10
SUN SAFE GLOVE
ATTACH-A-FLAP
The UVeto™ Sun Safe Gloves are a multipurpose, fingerless glove with palm patches for maximum grip and dexterity while the UPF 50+ fabric provides sun protection for your hands.
The UVeto™ Attach-A-Flap adds shade to caps and hard hats while providing adjustable coverage for your neck and ears from the sun’s harmful UV rays. It is a one size fits all design that stretches over a hard hat suspension system or around a ball cap. The UPF 50+ cotton and micro-mesh fabrics are light and comfortable to wear.
HEAT STRESS
PART NUMBER SIZE COLOR
AU SGSGR SMALL GREEN
AU SGMGR MEDIUM GREEN
AU SGMSK MEDIUM SKIN
AU SGLSK LARGE SKIN
AU SGMBL MEDIUM BLUE
AU SGLBL LARGE BLUE
PART NUMBER FABRIC COLOR
AU AAFCOR COTTON HIGH VIS ORANGE
AU AAFCNV COTTON NAVY
AU AAFOR MICRO-MESH HIGH VIS ORANGE
AU AAFNV MICRO-MESH NAVY
AU AAFYW MICRO-MESH HIGH VIS YELLOW
AU AAFSG MICRO-MESH SILVER GRAY
AU AAFWT MICRO-MESH WHITE
11
RATING FORALL PRODUCTSBRIM 'N SHADE
KALAHARI HAT
The UVeto™ Brim ‘N Shade easily fits over most cap-style hard hats to provide at least 3" of full-brim shade. The ventilated rear flap is 9.5" long to provide protection for the back of your neck. The UPF 50+ cotton-polyester fabric is available in Blaze Orange and Navy.
The UVeto™ Kalahari is a stand-alone hat that provides full coverage of the head, neck, and ears with the brim and ventilated flap. The hook and loop fastens the flaps under the chin to help keep the flaps in place. The UPF 50+ fabric, available in cotton or micro-mesh material, is soft, lightweight, and protects you from harmful UV rays.
PART NUMBER FABRIC COLOR
AU BNSOR COTTON/POLYESTER BLAZE ORANGE
AU BNSNV COTTON/POLYESTER NAVY
PART NUMBER FABRIC COLOR
AU KHCOR COTTON BLAZE ORANGE
AU KHCNV COTTON NAVY
AU KHMOR MICRO-MESH HIGH VIS ORANGE
AU KHMNV MICRO-MESH NAVY
AU KHMSG MICRO-MESH SILVER GRAY
AU KHMSB MICRO-MESH SKY BLUE
AU KHMCM MICRO-MESH CAMEL
AU KHMYW MICRO-MESH YELLOW
12
LE WORK HOOD
GOBI OVER HAT
KALA HATThe UVeto™ Kala hat has the same features as the Kalahari minus the front flap with hook and loop closure.
The UVeto™ Gobi Over Hat easily slips over most cap-style hard hats to provide extra face protection with the brim and extra neck protection with the ventilated flap. The UPF 50+ fabric, available in cotton or micro-mesh material, is soft, lightweight, and protects you from harmful UV rays.
The UVeto™ Le Work Hood is designed to be worn under a hard hat, other headwear, or by itself to provide head, ear, and neck protection. Its head strap adjusts for a custom fit. The lightweight UPF 50+ cotton material, available in Blaze Orange and Navy, protects your neck and ears from harmful UV rays. Features a built-in sweatband and hook and loop fastener to close the front.
PART NUMBER FABRIC COLOR
AU LWHOR COTTON BLAZE ORANGE
AU LWHNV COTTON NAVY
PART NUMBER FABRIC COLOR
AU GBCOR COTTON BLAZE ORANGE
AU GBCNV COTTON NAVY
AU GBMOR MICRO-MESH BLAZE ORANGE/WHITE
AU GBMNV MICRO-MESH NAVY/WHITE
AU GBMYW MICRO-MESH YELLOW/WHITE
PART NUMBER FABRIC COLOR
AU KLCOR COTTON BLAZE ORANGE
AU KLCNV COTTON NAVY
AU KLMAB MICRO-MESH ATLANTIC BLUE
AU KLMCM MICRO-MESH CAMEL
AU KLMNV MICRO-MESH NAVY
AU KLMOR MICRO-MESH HIGH VIS ORANGE
AU KLMSG MICRO-MESH SILVER GRAY
AU KLMYW MICRO-MESH YELLOW
13
KEWLLID®
REASONS TO USE KEWLLID®
Kewllid®
The KewlLid® cover is easy to use. Just place it on top of either a 44-gallon trash can or a 55-gallon drum, and it is ready to work. The lid supports a beverage cooler while leaving an opening to dispense trash. Made in the USA.
Part Number | KL10101
Proper hydration is vital for health and well-being, and with the KewlLid® cover your hydration station can be consolidated to a single, space saving tower. Also, since using the KewlLid® cover provides a space for cups, single-serve drink mixes, and a trash receptacle it can increase productivity!
Bottled water costs significantly more than tap water per gallon and is no healthier or cleaner than tap water. Bottles also create a huge environmental problem from both their production and disposal.
14
1.
2A.
Secure the bracket with bolts of any length to suit your application. Bracket holes suit 3/8” bolts or 5/16” bolts for small kits.
Fasten the restraint into the bracket.
Insert pins, and the restraint system is ready to use.
1.
3.3.
2A.
2B.
2B.
There are two pins for each restraint.
Place pins in the inner holes for smaller cylinders.
Place pins in the outer holes for larger cylinders.
Use of the BottleChock® restraint is all about prevention. A gas cylinder hitting the ground can be disastrous, and yet all too often they are being "secured" by a loose chain. By conforming to the bottle and restricting all forms of movement, the BottleChock® restraint takes an extra step in ensuring your cylinders are fully secured.
Features • Completely Restricts Cylinder Movement• Quick Cylinder Change Over• Available in a range of sizes• Flexible design makes it a "Snap" to place cylinders
BottleChock®
EASY 3-STEP INSTALL
OVERVIEW
UP TO 900 LBS
15
The single cylinder bracket is available in galvanized or stainless steel and is offered in four sizes.**For a list of additional sizes and options see chart on next page.
Small Cylinder Part Number | AU BCBG1S | GalvanizedPart Number | AU BCBST1S | Stainless Steel
Medium CylinderPart Number | AU BCBG1M | GalvanizedPart Number | AU BCBST1M | Stainless Steel
Large CylinderPart Number | AU BCBG1L | GalvanizedPart Number | AU BCBST1L | Stainless Steel
The dual cylinder bracket is available in galvanized or stainless steel and is offered in four sizes.* *For a list of additional sizes and options see chart on next page.
Small CylinderPart Number | AU BCBG2S | GalvanizedPart Number | AU BCBST2S | Stainless Steel
Medium CylinderPart Number | AU BCBG2M | GalvanizedPart Number | AU BCBST2M | Stainless Steel
Large CylinderPart Number | AU BCBG2L | GalvanizedPart Number | AU BCBST2L | Stainless Steel
SINGLE CYLINDER BRACKET
DUAL CYLINDER BRACKET
16
BOTTLECHOCK FULL LIST
PART NUMBER BRACKET TYPE # CYLINDERS CHOCK SIZE CYLINDER SIZES
AU BCBG1L GALVANIZED 1 LARGE 9 ½" - 14 ⅝"
AU BCBG2L GALVANIZED 2 LARGE 9 ½" - 14 ⅝"
AU BCBG1ML GALVANIZED 1 MED/LARGE 9" - 12"
AU BCBG2ML GALVANIZED 2 MED/LARGE 9" - 12"
AU BCBG1M GALVANIZED 1 MEDIUM 6 ¼" - 9"
AU BCBG2M GALVANIZED 2 MEDIUM 6 ¼" - 9"
AU BCBG3M GALVANIZED 3 MEDIUM 6 ¼" - 9"
AU BCBG4M GALVANIZED 4 MEDIUM 6 ¼" - 9"
AU BCBG1S GALVANIZED 1 SMALL 3 ⅞" - 5 ⅝"
AU BCBG2S GALVANIZED 2 SMALL 3 ⅞" - 5 ⅝"
AU BCBGOXYACET GALVANIZED 2 MED & LARGE 6 ¼" - 14 ⅝"
AU BCBGLABL* GALVANIZED 1 LARGE 9 ½" - 14 ⅝"
AU BCBGLABM* GALVANIZED 1 MEDIUM 6 ¼" - 9"
AU BCBGLABS* GALVANIZED 1 SMALL 3 ⅞" - 5 ⅝"
AU BCBST1L STAINLESS STEEL 1 LARGE 9 ½" - 14 ⅝"
AU BCBST2L STAINLESS STEEL 2 LARGE 9 ½" - 14 ⅝"
AU BCBST1ML STAINLESS STEEL 1 MED/LARGE 9" - 12"
AU BCBST2ML STAINLESS STEEL 2 MED/LARGE 9" - 12"
AU BCBST1M STAINLESS STEEL 1 MEDIUM 6 ¼" - 9"
AU BCBST2M STAINLESS STEEL 2 MEDIUM 6 ¼" - 9"
AU BCBSTOXYACET STAINLESS STEEL 2 MED & LARGE 6 ¼" - 14 ⅝"
* Lab bracket kits come with just one bracket & chock and attach to a table-top or counter-top with the built-in clamp.
17
SAFETY SOLUTIONS
The Glove Rings® accessory provides a quick and easy method to form a tight seal on many types of chemical suits so less time is spent suiting up. The rings are are made from a strong, flexible plastic, which provides a firm surface for taping and results in a consistent seal. The rings are available in various sizes to meet different needs. Made in the USA.
The Power Band™ magnetic wrist band is perfect for holding nuts, bolts, screws, or small hand tools allowing you to perform the task at hand safely. The bands are light weight, comfortable to wear, and built to last.
GLOVE RINGS® ACCESSORY
POWER BAND™
Perfect for:• Hazmat• Sandblasting• Hydro-Blasting • Industrial Cleaning• Asbestos Abatement
PART NUMBER COLOR FINISH SIZE
OMS GR-CRM CREAM SLICK OD: 3.80”/4.43" | LENGTH: 2.90”
OMS GR-WH WHITE MICRO-GRIP RINGS OD: 4.00”/4.6O” | LENGTH: 2.85”
OMS GR-NTL NATURAL MICRO-GRIP RINGS OD: 3.75”/4.25” | LENGTH: 3.50”
OMS GR-SM GRAY MICRO-GRIP RINGS OD: 3.25”/4.00” | LENGTH 3.30”
PART NUMBER SIZE
PB800S SMALL
PB800M/L MEDIUM/LARGE
PB800XL EXTRA LARGE
18
Hook
O-Ring
PART NUMBER SIZE
AU DGTRVLC 1 oz
AU DG120C 4 oz (120 mL)
AU DG500PMP 16.9 oz (500 mL)
PART NUMBER COLOR ATTACHMENT
OMS LYDBK ALLIG BLACK ALLIGATOR CLIP
OMS LYDBK HOOK BLACK HOOK
OMS LYDBK O-RING BLACK O-RING
OMS LYDRD ALLIG RED ALLIGATOR CLIP
OMS LYDRD HOOK RED HOOK
OMS LYDRD O-RING RED O-RING
OMS LYDBL ALLIG BLUE ALLIGATOR CLIP
OMS LYDBL HOOK BLUE HOOK
OMS LYDBL O-RING BLUE O-RING
DERMA GUARD
PULL-A-WAY™ LANYARD
Derma Guard skin cream is a unique, industrial strength, and non-toxic skin protectant which provides a clinically tested barrier of protection and skin moisturizing properties. The cream is non-greasy, and one application will last 4 hours, no matter how many times you wash your hands with water, solvent, or alcohol scrubs. The 26 ingredients combined in the Derma Guard skin cream are formulated to solve the problems you and your colleagues may come across in everyday work. The extra layer of protection that the Derma Guard cream provides helps prevent paints, glues, inks, dyes, and oils from getting into your pores.
The Pull-A-Way™ lanyard is made entirely out of nonabsorbent, dielectric plastics that are easy to clean and long lasting. The dual safety breakaways lie on either side of the neck and do not pinch or irritate the skin. Three styles of attachments are available to fit a wide variety of needs. The lanyard comes in three colors: black, red, and blue.
19
Alligator Clip
Dual Breakaway
CUSTOM IMPRINTS
CUSTOMIZE YOUR CLIPS
Imprint your company name, logo, contact information, or even a unique safety slogan! Custom imprinting available on:
• Glove Guard® (GG) Clip• Utility Guard® (UG) Clip• Handi Klip® (HK) Clip• Utility Catcher® (UHC) Clip• Goggle Guard® (GGG) Clip• Glove Catcher® (GC) Clip
Imprints can be up to two colors and printed on both sides of the Glove Guard®, Handi Klip®, and Utility Guard® clips.
Gear always looks better with your logo on it. If you haven't customized your clips yet, now is a perfect time to start! Customization is an easy and fast process with production taking up to 7 business days after confirmation.
Send all email inquiries to [email protected] with a file of what you would like imprinted on your clips. Please be sure to provide what product(s), quantity, colors, and sides you would like imprinted.
Process and Requirements
It's Simple!
When we receive your inquiry with the required information, we will send a paper proof for your approval. Once we have a signed paper proof and a confirmed purchase order from your distributor, production will take up to 7 business days before shipment.
All imprint orders require a 50 unit minimum and other setup fees may apply.
Glove Guard® clip Utility Guard® clip Handi Klip® clip
20
GG PART NUMBER HK PART NUMBER UG PART NUMBER STANDARD SAFETY SLOGAN
50XX0 50XX4 50XX7 STOP HAND INJURIES
51XX0 51XX4 51XX7 SAFETY A TEAM EFFORT
52XX0 52XX4 52XX7 GLOVES A HANDS BEST FRIEND
53XX0 53XX4 53XX7 GOAL: ZERO HAND INJURIES
54XX0 54XX4 54XX7 KEEP GLOVES HANDY
55XX0 55XX4 55XX7 GIVE SAFETY A HAND
56XX0 56XX4 56XX7 THINK SAFETY
57XX0 57XX4 57XX7 GET A "GRIP" ON SAFETY
58XX0 58XX4 58XX7 SAFETY FIRST
COLOR NUMBER COLOR
40 YELLOW
41 HIGH VIS YELLOW
50 GRANITE
60 GREEN
61 LIME GREEN
62 SIGNAL GREEN (HK ONLY)
70 OLIVE GREEN
80 BLAZE ORANGE
COLOR NUMBER COLOR
10 BLACK
20 BLUE
21 METAL DETECTABLE
27 PURPLE
30 RED
31 FIRE RED (HK ONLY)
37 MAROON (HK ONLY)
39 HIGH VIS PINK
3. Example Part Number: A lime green Utility Guard™ Clip with Think Safety Slogan | 56617
1. Pick from one of our 9 Safety Slogans to enhance your safety programs and to remind workers about the importance of safety.
2. Choose a color from the legend below and swap for “XX” in the part number above.
SAFETY SLOGANS
21
Copyright © Glove Guard LP 2019. The Glove Guard logo , Glove Guard® and its shape, Utility Guard®, Handi Klip®, Goggle Guard®, Glove Rings® , Utility Catcher®, OktoLock®,
KewlLid®, and Glove Catcher® are registered trademarks owned by Glove Guard LP. Utility Bag™, 1939™, 7000™, 40000™, Goggle Catcher™, Pull-A-Way™ and ‘Keep Up With The Tools
Of Your Trade While Keeping Safety In Mind’ are trademarks of Glove Guard LP.
Safety@GloveGuard. [email protected]
www.GloveGuard.com
1625 E Houston St, Highlands, TX 77562Mail: P.O. Box 946, Highlands, TX 77562
Toll Free: 888.660.6133Phone: 281.426.2714Fax: 281.426.6135