Item #: Project - HOSHIZAKI · Refrigerated Merchandiser - 45 cu.ft. With sliding doors Graphic...
Transcript of Item #: Project - HOSHIZAKI · Refrigerated Merchandiser - 45 cu.ft. With sliding doors Graphic...
Dimensions / CapacityInterior Storage Capacity (CF)
Overall Width x Depth
Height
Adjustable Shelves
Shelf Dimensions (W x D)
Crated Shipping Weight
Crated Width x Depth x Height
Features
Electrical / RefrigerationVoltage
HACR Breaker
Electrical Connection (NEMA)
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption (kWh/day) @ASHRAE
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (oz)
Options
Hoshizaki reserves the right to change specifications without notice.
RM-45-SD08/24/18
Item # 13409RM-45-SDGlass Door Merchandiser with Sliding Doors
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact
factory for warranty in other countries.
Warranty
3 Year - Parts and Labor onentire machine.
5 Year - Parts on Compressor
W x D x H51” x 30.25” x 78.25”
*
*
RM-45-SD
Printed in the U.S.A.
45 ft3
51” x 30.25”
78.25”
5 per section
23” x 20.5”
545 lbs.
55” x 34” x 85”
115/60/1
15.0 Amps
5-15P
104-126
60° to 86°F
34° to 40°F
11.8
3.84
1357 (1/2HP)
R-134a / 7oz.
RM-45-SD
RM-45-SD
Two Section
Two Section
ANSI / NSF 7
• Large glass doors are energy efficient Low-E multi pane glass
• Automatic energy saving hot gas loop on front edge of refrigeration compartment helps prevent condensation particularly in hot humid environments
• LED illuminated exterior canopy
• Energy efficient vertical LED interior lights illuminate products on display
• Silver painted aluminum exterior with NSF approved white aluminum interior and stainless steel floor
• Electronic controller with energy saving mode will save approximately 40% energy consumption during non- peak hours
• Environmentally friendly CFC-Free Polyurethane insulation with cyclopentane blowing agent.
• (5) white epoxy coated shelves per section with product stops are standard
• Stainless steel shelf clips adjustable in ½” increments on anodized aluminum supports
• Refrigerant flow is controlled with a capillary tube
• 8 Foot cord and plug
• 2 inch leveling legs standard
• Three years parts and labor warranty
• Five-year compressor warranty
Capacity: 20 oz. bottles: 560 12 oz. bottles: 1260
Electronic controller with visual and audio high and low temperature alarms
Forced air evaporator for quick temperature pull down
Self closing sliding doors with spring assist and stay open feature
Organizer shelf (HS-5293)Price tag holder (HS-5294)Epoxy Shelf (HS-5318)
4” Casters (HS-5288)2.25” Casters (HS-5037)
This equipment is intended for the storage of non-potentially hazardous bottled or canned products only.
Requires 2 sets of:
SIDE VIEWFRONT VIEW
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.
PLAN VIEW
Printed in the U.S.A.
SECCIÓN A-AESCALA 3/64
SECCIÓN B-BESCALA 3/64
VISTA 2ESCALA 3/64
E-ID-02-01VISTA ENSAMBLADA
LA INFORMACIÓN CONTENIDA EN ESTE DOCUMENTO ES PROPIEDAD EXCLUSIVA DE TRANSCOLD INGENIERÍA GUATEMALA, S.A. PROHIBIDA SU REPRODUCCIÓN TOTAL O PARCIAL SIN LA DEBIDA AUTORIZACIÓNMATERIAL : TOLERANCIA : FORMATO PROGRAMA CNC : DIBUJO No. :
ÚLTIMOS CAMBIOS :REF. DWG:
USADO EN :ESCALA :FECHA : APROBADO POR: DISEÑADO POR : DIBUJADO POR :
TITULO :
13/01/2017
3/64" = 1" DISEÑADOR R. MAZAREIGOS
13/01/2017
±1/32" OFICIO VISTA ENSAMBLADAVISTA ENSAMBLADA
\\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ORTOGONAL.dwg
ENSAMBLE DE EQUIPO
ING. H. VALDES
REF. IPT: \\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ENSAMBLADA.iam
VR-45-SD-HO-US
A A
B
B
FECHA SIM. REVISION AUT. DIB. VÍA
51 [1295.4]
46 1/4 [1174.8]2 3/8 [60.3] 2 3/8 [60.3]
29 19/
32 [752]
26 11/
32 [669.1]
65 1/8
[1654.2]
12 3/8 [314.3]
79 1/4
[2012.7]
62 1/2
[1587.5]
30 3/16 [766.8]
29 1/2 [749.3]
23 3/8 [593.7]
51 [1295.4]
79 5/1
6 [2014.3]
77 9/1
6 [1970.1]
SECCIÓN A-AESCALA 3/64
SECCIÓN B-BESCALA 3/64
VISTA 2ESCALA 3/64
E-ID-02-01VISTA ENSAMBLADA
LA INFORMACIÓN CONTENIDA EN ESTE DOCUMENTO ES PROPIEDAD EXCLUSIVA DE TRANSCOLD INGENIERÍA GUATEMALA, S.A. PROHIBIDA SU REPRODUCCIÓN TOTAL O PARCIAL SIN LA DEBIDA AUTORIZACIÓNMATERIAL : TOLERANCIA : FORMATO PROGRAMA CNC : DIBUJO No. :
ÚLTIMOS CAMBIOS :REF. DWG:
USADO EN :ESCALA :FECHA : APROBADO POR: DISEÑADO POR : DIBUJADO POR :
TITULO :
13/01/2017
3/64" = 1" DISEÑADOR R. MAZAREIGOS
13/01/2017
±1/32" OFICIO VISTA ENSAMBLADAVISTA ENSAMBLADA
\\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ORTOGONAL.dwg
ENSAMBLE DE EQUIPO
ING. H. VALDES
REF. IPT: \\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ENSAMBLADA.iam
VR-45-SD-HO-US
A A
B
B
FECHA SIM. REVISION AUT. DIB. VÍA
51 [1295.4]
46 1/4 [1174.8]2 3/8 [60.3] 2 3/8 [60.3]
29 19/
32 [752]
26 11/
32 [669.1]
6 5 1/8
[1654.2]
12 3/8 [314.3]
79 1/4
[2012.7]
62 1/2
[1587.5]
30 3/16 [766.8]
29 1/2 [749.3]
23 3/8 [593.7]
51 [1295.4]
79 5/1
6 [2014.3]
77 9/1
6 [1970.1]
SECCIÓN A-AESCALA 3/64
SECCIÓN B-BESCALA 3/64
VISTA 2ESCALA 3/64
E-ID-02-01VISTA ENSAMBLADA
LA INFORMACIÓN CONTENIDA EN ESTE DOCUMENTO ES PROPIEDAD EXCLUSIVA DE TRANSCOLD INGENIERÍA GUATEMALA, S.A. PROHIBIDA SU REPRODUCCIÓN TOTAL O PARCIAL SIN LA DEBIDA AUTORIZACIÓNMATERIAL : TOLERANCIA : FORMATO PROGRAMA CNC : DIBUJO No. :
ÚLTIMOS CAMBIOS :REF. DWG:
USADO EN :ESCALA :FECHA : APROBADO POR: DISEÑADO POR : DIBUJADO POR :
TITULO :
13/01/2017
3/64" = 1" DISEÑADOR R. MAZAREIGOS
13/01/2017
±1/32" OFICIO VISTA ENSAMBLADAVISTA ENSAMBLADA
\\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ORTOGONAL.dwg
ENSAMBLE DE EQUIPO
ING. H. VALDES
REF. IPT: \\FOGELGT3B\Manuales de Partes\MANUALES AUTOCAD\VR-45-SD-US\VISTA ENSAMBLADA.iam
VR-45-SD-HO-US
A A
B
B
FECHA SIM. REVISION AUT. DIB. VÍA
51 [1295.4]
46 1/4 [1174.8]2 3/8 [60.3] 2 3/8 [60.3]
29 19/
32 [752]
26 11/
32 [669.1]
65 1/8
[1654.2]
12 3/8 [314.3]
79 1/4
[2012.7]
62 1/2
[1587.5]
30 3/16 [766.8]
29 1/2 [749.3]
23 3/8 [593.7]
51 [1295.4]
79 5/1
6 [2014.3]
77 9/1
6 [1970.1]
RM-45-SD08/24/18
Item # 13409RM-45-SDRefrigerated Merchandiser - 45 cu.ft.With sliding doors
Graphic Requirements:• 360 dpi resolution. Scale 1=1 • Graphics must be saved in photoshop (with layers) • Colors for CMYK process (or your sign company file type requirements) • Image with 1/4” of excess by side • Include a full color print out
Material Requirements:• Thickness: 1/16” (1.5mm)• Good- Acrylic/Pexiglass, Better - high impact acrysteel, acrylite SG Best- Super impact Lexan, Lexan SG Polycarbonate
Note: Texts and important parts of the image should be within the visible area.The visible area is illustrated by dotted lines when it applies.
HEADER DIMS