ISC 2013-14 Catalogue
-
Upload
isc-solutions-in-metal -
Category
Documents
-
view
250 -
download
4
description
Transcript of ISC 2013-14 Catalogue
climb. work. rescue.
Solutions in Metal
Photo courtesy of LBO, Norway
forefront of climbing, rigging and rescue product development for more than 15 years and our products are distributed and used in over 25
countries worldwide.
We supply products globally to the working at height industry which
includes Rope Access, Arborists, Emergency Services, Ropes Course,
Climbing Walls and Industrial Fall Protection users as well as the Motor
Racing, Military and other specialist markets.
audited and accredited by SGS.
conception, le développement et la fabrication d'éléments d'ingénierie
développement de produits d'alpinisme, de levage et de sauvetage depuis plus de 15 ans et nos produits sont distribués et utilisés dans
plus de 25 pays à travers le monde.
Nous fournissons des produits à des entreprises pratiquant le travail en
hauteur, notamment les arboriculteurs, les services d'urgence, les
centres proposant des parcours acrobatiques ou des murs d'escalade
protection contre les chutes. Nous fournissons également le secteur des
courses automobiles, l'armée et d'autres marchés spécialisés.
protection
audité et accrédité par SGS.
Bienvenue dans le catalogue de produits ISC
Welcome to the ISC product catalogue
ISC es una empresa conocida mundialmente que se especializa en el
diseño, desarrollo y fabricación de componentes de seguridad crítica y
otras ‘Soluciones de Metal’. Hemos liderado el desarrollo de productos
de alpinismo, jarcia y de rescate durante más de 15 años y nuestros
Suministramos productos en todo el globo para los trabajadores de
sectores de trabajos en alturas, como la arboricultura, los servicios de
emergencia, los circuitos de cuerdas, las paredes de escalada y la
prevención de caídas en la industria, además de las carreras de motor,
el sector militar y otros mercados especializados.
Los productos ISC cumplen con los estándares internacionales, como la Directiva 686/89/CEE relativa a los equipos de Protección Individual,
la norma ANSI Z359 y la NFPA 1983, y se fabrican de acuerdo con el
sistema de garantía de calidad ISO9001/2008 auditado y reconocido
por la organización SGS.
ontwerp, de ontwikkeling en de productie van machinaal vervaardigde
onderdelen voor veiligheidsuitrusting en andere 'Oplossingen van
Metaal'. We nemen al meer dan 15 jaar het voortouw als het gaat om de ontwikkeling van klim-, hijs- en reddingsproducten en onze
producten worden in meer dan 25 landen overal ter wereld verkocht
en gebruikt.
wordt gewerkt, waaronder bosbouw, hulpdiensten, touwparcoursen,
specialistische sectoren zoals de motorsport en het leger.
De producten van ISC voldoen aan internationale normen, waaronder CE (richtlijn 686/89/EEC betreffende persoonlijke beschermingsmid-
delen), ANSI Z359 en NFPA 1983, en worden vervaardigd in
overeenstemming met een ISO9001/2008-kwaliteitsbewakingsysteem
dat door SGS is getest en goedgekeurd.
Welkom bij de productcatalogus van ISC
ISC ist ein weltweit anerkanntes Unternehmen, das sich auf die
Konzeption, Entwicklung und Fertigung von Sicherheitskomponenten
und sonstigen ‘Lösungen aus Metall‘ spezialisiert hat. Wir stehen seit
über 15 Jahren an der Spitze der Produktentwicklung für Kletter-, Spannsystem- und Rettungslösungen, und unsere Produkte werden in
über 25 Ländern vertrieben.
Wir liefern weltweit Produkte für alle Arten von Höhenarbeiten wie
Baumpflege, Rettungsdienste, Hochseilparcours, Kletterwände und
industrielle Absturzsicherung sowie für Motorsport, militärische
Zwecke und sonstige Spezialmärkte.
ISC-Produkte entsprechen internationalen Standards wie CE (PPE Richtlinie 686/89), ANSI Z359 und NFPA 1983. Sie werden gemäß
einem ISO9001/2008-Qualitätssicherungssystem von der SGS
hergestellt, geprüft und zugelassen.
Herzlich willkommen zum ISC-Produktkatalog
ISC è un'azienda di livello mondiale specializzata in progettazione,
sviluppo e realizzazione di importanti componenti tecnici di sicurezza e
altre ‘Soluzioni in Metallo’. Da oltre 15 anni siamo all'avanguardia nello
sviluppo di prodotti per l'alpinismo, per i sistemi di paranchi e per le operazioni di salvataggio e i nostri prodotti vengono distribuiti e
utilizzati in più di 25 paesi nel mondo.
Forniamo prodotti a livello globale per il settore del lavoro in quota,
che include arboricoltura, servizi di emergenza, percorsi elevati,
arrampicate e utenti di protezioni anticaduta industriali, oltre a vari
mercati specialistici come quello automobilistico o militare.
I prodotti ISC sono conformi agli standard internazionali fra cui CE
(Direttiva sui dispositivi di protezione individuale 686/89/CEE), ANSI Z359 e NFPA 1983 e vengono realizzati in conformità al sistema di
gestione della qualità ISO9001/2008, verificato e certificato da SGS.
Benvenuti al catalogo prodotti ISC
Contents
About Us
Descenders
D2 Escape Descender Kits
D4 Work Rescue Descender
A-B Descender/Pro Allp Decsnder Figure 8 & Fiqure 9 Descenders
Edge Protection
Back-up & Ropegrab Devices
REDtm Back-up Device
Ropegrabs & Rockertm
Hand Ascenders
Anchors & Accessories
Girder Grips/Dyvdag Anchors Wire Anchor Strops
Rigging Plates
Climbtechtm Portable Anchors Deadweight Portable Anchors
Deadweight Trolley
A-Frame
Tripod Systems
Tripods
Accessories/Brackets Winch
Arachnipod Edge Management System Slix100tm Stretcher
Fall Arrest Blocks
Progress Capture Pulleys
R-ALFtm & LH-ALFtm Auto-locking Pulleys
ALFtm Climb Assist Pulley
SmartSnaptm Continuous Attachment Device
Zipspeed Tandem Trolleys
Pulleys
Shear Reduction/Top Roping
Eiger Lightweight Heavy-duty Prussiks
Cast Rigging Pulleys
PortaWraps
Singing Tree Rope Wrench
Karabiners
Aluminium
Steel
Stainless Steel
Snaphooks Tactical/Military Products
Buckles & Components
Quick Release Buckles (QRBs)
Terms & Conditions www.iscwales.com
12
13
14
18
27
37
45
10
20
29
21
24
22
25
26
30
36
38
43
44
4
6
16
48
50
Our engineers use the latest state of the art software, hardware, and systems through the entire product life cycle. This is all
Universities giving us access to the latest thinking, materials
apprenticeships.
Our highly skilled manufacturing department is where our innovative product ideas are transformed from raw material to finished goods, within our 25,000 ft2 facility in North Wales.
advanced
grows, and as we continue to increase the level of technology within our products.
Manufacturing Facilities Engineering & Design
Our philosophy here at ISC is to provide our customers with the best products possible. To achieve this we actively consult with and listen to our customers’ ideas, feedback and expectations. This valuable information is then fed in to our new product development process. Feedback about existing products helps to drive our process of continuous product improvement.
demanding environments in which they are used.
Our quality system is regularly
audited by external auditors SGS
UK Ltd and is certified to
ISO9001:2008.
Design, Prototype, Manufacture & Testing
Using the latest Solidworks™ 3D Computer Aided Design (CAD) software provides us with a complete design and virtual
enables our engineers to interact in virtual reality with the products to visualise, test, and optimise the design.
To complement our design abilities we have advanced in house prototyping facilities. These include both manual and Computer
machines are networked to our MasterCAM X™ Computer Aided Machining (CAM) software which allows rapid programming of machinery to produce complex 3D surfaces and shapes. The
accurately and repeatedly reproduce our designs in any metal or plastic material required.
relevant national and international standards, as well as our own rigorous standards. At ISC we believe that it is vital that every piece of safety
critical equipment that we ship has been thoroughly tested
and inspected by highly competent people, reassuring the
user that each and every component has been handled by a
real person to ensure that it meets the highest standards.
Testing & Quality Control Software & Prototyping
Image extracted from Solidworks 3D Model of the ISC D4 Descender – see page 7 for product details
05
controlled. Either side of the sweet spot there is an auto-lock function -when the user lets go of the handle it automatically stops and when the user pulls the handle too hard it automatically stops (often referred to as a ‘panic-stop’).
Escape Descender
Aramid fibres (such as Technora)
are perfect for use in applications
where fire is the main hazard
(such as bail-out or evacuation from wind turbines).
Kit Options
Standard Polyester ropes are ideal
for use in other areas (such as
Linesman
elevating work platforms/
skylifts).
Polyester Rope
Technora Rope
Technical Information
Code Rope Rope
(g/m) (oz/ft)
Rated Load
(kg) (lb)
KT860A Polyester
KT860B Technora
(g)
(oz)
Kit Weight (excluding Rope)
493 17
493 17
45
46
0.5
0.6
100
100
220
220
DESCEND
PANIC BRAKE
STOP & RESET
Indicator Arrow
Features & Applications
Our engineers developed a new handle operated cam system specifically so that in a panic situation the Descender would actually stop the descent, rather than just slow it down– the D2 Descender is the only Micro-Descender in the world to offer this function.
using the thumb) which allows the user to smoothly feed the rope through the device, without the use of the handle. The cam feed feature is particularly useful for fast Bail-out or for work positioning during roof work for example.
emergency hauling (when used as part of a 2:1 ‘Z-rig’).
manufacturers have even integrated it into a harness back-pack so that self-rescue can be made easy.
Photo courtesy of ClimbTech, USA
Work Rescue Descender
Features & Applications
Weight > Rated Load >
Rope > Standards >
655g (23oz) 240kg (551lb) 10.5-11.5mm (3/8-7/16”) EN12841, NFPA, ANSI
RP880 D4 Descender
The NEW D4 Descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is a double-stop device with an auto-lock function which is activated whenever the operator lets go of the handle. The panic brake will only lock out when in free-fall, meaning that the panic brake is not overly sensitive in normal use.
The D4 cam is made from solid Stainless Steel and is very wear and corrosion resistant. The device has an in-built wear indicator. The D4 Descender cams are replaceable (by competent trained personnel), potentially giving the D4 a longer in-use life.
device has a double stop mechanism, as although
PANIC BRAKE
DESCEND
RESET
PRIMED
The D4 Descender also has a double safety locking mechanism,
rotated open due to the positioning of the Karabiner and as an
additional safety feature the D4 has been designed with a push button ‘click-lock’ safety closure. The D4 is easy to attach/
detach from rope without detaching from operators harness,
device.
The D4 is suitable for rescue as it has a rated load of 240kg and is suitable for use with 10.5-11.5mm (7/16”) Low Stretch ropes (EN1891).
07
Push-button &
location hole
Descenders (continued)
The A-B Descender is a ’squeeze style’ device, designed for use in Technical Rope Access, Intervention/Special Forces and is rated for two-person rescue loads.
activated when the user pulls too hard on the handle and/or if the user lets go of the handle.
Features & Applications Features & Applications
Pro ALLP A-B Descender
The Pro ALLP is rated for a two-person load and is suitable for use in rescue applications.
controlled descent, or screw-controlled descent adjustment. The screw control allows for precise adjustment and can also
descent has been achieved, the Auto-lock function can be activated, putting the Descender in to ‘cruise control’.
extended, spring-loaded flip down handle
which gives extra leverage when a finer
degree of descent control is required.
The flip down handle is of particular use
for extra control of a two-person rescue
load.
Main Control Lever
Screw Control For precise adjustment
and cruise control
RP810
RP400
Technical Information
Code Rope Ø
(mm) (inch)
RP810 A-B Descender
RP400 Pro Allp
(g)
(oz)
Weight
449 16
589 21
10.5-11
10.5-12.7
3/8-7/16
3/8-1/2
Photo courtesy of TOPROPE, Switzerland
Figure 8 & 9s
Features & Applications
RP120 RP110
RP101
RP100
RP130
protecting ropes from wear. Each Edge Roller box has base rollers and side rollers, to protect the rope from edge wear and lateral movement.
ER100
Edge Roller boxes are sold separately and
boxes can be added or removed to suit
the terrain of each application.
RP110
RP100
RP101
RP120
Figure 8
RP130
Figure 9
(kN)
MBS
(lbf)
25
35
80
25
5620
7868
17985
5620
30 6744
- -
(oz) (g)
112
196
600
56
200
445
4
7
21
2
7
16 ER100
Edge Protection
(inch)
5/16-1/2
5/16-5/8
5/16-1/2
5/16-1/2
5/16-1/2
3/16- 5/16
Technical Information
Standard
Rescue (Aluminium)
Rescue (Stainless)
Micro 8
Figure 9
Edge Roller (1 unit)
Weight Rope Ø Type Code
(mm)
9-13
8-16
8-13
9-13
9-13
5-7
locking.
The Figure 9 device performs in a similar way to the Rescue 8, but has the extra benefit of an anti-twist attachment point. The attachment hole has
09
Edge Protection
Back-up Device
RED Device
in locked
position
Poppertm Cord
provides a secondary attachment point for the tow cord.
Poppertm clip releases under the force. The RED is designed for use with an 800mm dynamic cowstail,
(shock absorber not required).
The RED makes use of ‘Rotational Braking’ which means that the device
rotates clockwise creating friction and resistance, which then results in
very effective automatic braking in the
breakaway tow-cord.
RP891 Fixed RP892 Popper
Technical Information
Approved Ropes
The RED should be used with Low Stretch 10.5—11.0mm (3/8-7/16”) ropes (EN1891) only.
(g) (oz)
221
222
224
8
8
8
Rope Ø
3/8-7/16
3/8-7/16
3/8-7/16
10.5-11
10.5-11
10.5-11
(mm) (inch)
Code
RP890
RP891
RP892
No cord
Fixed cord
Poppertm cord
Type Weight
Rotational Braking
Karabiner Attachment
Loop retains device in
case of accidental dropping
Ropegrabs
Rocker
Thumb-catch
Allows the Rockertm to be
‘parked’ on the rope at any position, for work positioning
The Rockertm can be fitted to the rope at any point and can be
Rockertm is designed for use without a shock-absorber and can
accordance with EN358).
Ropegrabs
Features & Applications Features & Applications
ISC Ropegrabs have non-aggressive cam profiles to help prevent rope wear.
RP500
RP203
RP209
RP204
RP205
removable (Pip Pin) axles. The Pip Pin axle is quick and easy to fit/release and can be fitted to the rope at any point, without detatching from the user’s harness.
ISC Ropegrabs can be used on work positioning lanyard/fliplines.
Technical Information
Type
Fixed Axle Ropegrabs
Rocker
Small
Large
Small
Large
168 6
(g)
Weight
(oz)
177
300
6
11
180
302
6
11
3/8-1/2 10.5-12.7
Rope Ø
(mm) (inch)
3/8-1/2
9/16-5/8
10.5-13
14-16
10.5-13
14-16
Removable Pip Pin Ropegrabs
RP203
RP204
RP209
RP205
Code
RP500
3/8-1/2
9/16-5/8
11
Hand Ascenders
Aluminium extrusion and are suitable for heavy-duty use.
Technical Information
5/16-1/2
5/16-1/2
9-13
9-13
5/16-1/2
5/16-1/2
9-13
9-13
364
364
13
13
13
13
367
367
Professional
RP210
RP220
RP230
RP240
Left Handed
Right Handed
Left Handed
Right Handed
Ultrasafe
Rope Ø
(mm) (inch)
Weight
(oz) (g)
Code Type
Features & Applications
Coned Cam Profile For minimal rope wear
Ultrasafe Cam Pin For improved rope retention
RP210
RP220
RP240 RP230
ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Hand Ascenders have both primary and secondary attachment holes.
accidentally pulled out between the cam and the body.
ISC Professional and Ultrasafe Hand Ascenders have moulded
versions.
Photo courtesy of DIRA Group, Netherlands
Anchors & Accessories
Girder Grip & Concrete Anchors are made from high strength materials & can be used in vertical or horizontal plane. Girder/Concrete Anchors & Strops are Approved to CE EN 795. ISC Rigging Plates are made from high strength Aluminium and have 20mm (3/4”) holes, to allow Karabiners to be fully rotated.
Features & Applications
anchorage solution which can be used in the vertical or horizontal plane. These anchors are operated by using two fingers to pull back the red collar. This action retracts the retention bar, allowing the device to be inserted in to the anchor hole. Once the device is in position, the red collar can be released, causing the retention bar to engage, fixing the device in the anchor hole.
ISC Wire Strops are manufactured from Galvanised Steel, fitted with Thimble eyes and a protective PVC cover. They are available irequest).
RP310
RP320
RP300
WSX00 Range
GG201 GG101
13
Technical Information
(kN)
MBS
(lbf)
28
28
28
6294
6294
6294
-
-
-
-
-
-
36
40
45
8093
8992
10116
Girder/Concrete Anchors
Code
GG101
GG201
GG301
WS100
WS150
WS200
RP300
RP310
RP320
Type
Small (Girder Grip)
Large (Concrete Anchor)
Medium (Pre-cast Anchor)
100cm (39”)
150cm (59”)
200cm (78”)
Small
Medium
Large
Rigging Plates
Weight
(oz) (g)
19
41
24
18
28
35
502
780
998
3
8
16
93
219
442
550
1160
680
Wire Strops- EN795 (other lengths available on request)
The Climbtechtm range is perfect for use in construction and demolition as well difficult access applications in rope access, rope rescue and even theatre rigging. The anchors can be used with a variety of work positioning, fall protection and rescue systems.
Toggle Lok Anchor The ClimbTechtm Toggle Lok Anchor is portable, reusable device which can be used as part of a flexible horizontal life line system (for up to two users) or as a direct anchorage connection (single user). The Toggle Lok can be used in precast concrete and on steel flanges and can be placed in horizontal, vertical and overhead surfaces. This Anchor should be placed in to a 20mm (3/4”) diameter hole.
CT104
Technical Information
Code MBS
(kN) (lbf)
WLL
(kg) (lb)
CT104
(g)
(oz)
Weight
181 6 22 5000 181 400
Removable Concrete Anchors
ClimbTechtm Concrete Anchors are portable, reusable devices
concrete substrate surfaces. Once a suitable hole has been
required. These anchors are available in two sizes/ratings and are suitable for use for fall protection applications.
CT103
CT102
Technical Information
Code MBS
(kN) (lbf)
WLL
(kg) (lb)
CT102
CT103
(g)
(oz)
Weight
181 6
181 6
22
44
5000
10000
140
140
310
310
Photo courtesy of ClimbTech, USA
Portable Anchors
Beam Trolley The ClimbTechtm Beam Trolley is a mobile anchor point, for use on structural beams. The device is fitted with toggle plates, which allow for simple adjustment of the rollers when installing/uninstalling the device. The Beam Trolley is ideal for use as an anchor connection for fall arrest systems (not suitable for material handling). No surface alteration (i.e. drilling) is required in order to use the Beam Trolley.
CT100
Technical Information
Code MBS
(kN) (lbf)
WLL
(kg) (lb)
CT100
(kg) (lb)
Weight
3.5 8 22 5000 140 310
CT101
Technical Information
Code MBS
(kN) (lbf)
WLL
(kg) (lb)
CT101
(kg) (lb)
Weight
1.5 3 22 5000 140 310
Beam Slider The ClimbTechtm I-Beam Slider is a lightweight, reusable anchor clamp which can be attached to a range of beam widths. The Beam Slider is quick and easy to fit/adjust and eliminates without surface alteration (i.e. drilling) and with no need of tools. Once mounted, the Beam Slider slides freely and easily along the beam in either direction.
CT106 (Steel)
CT105 (Concrete) Technical Information
Code Type MBS
(kN) (lbf)
WLL
(kg) (lb)
CT105 Concrete
CT106 Steel
(g)
(oz)
Weight (including bolt)
917 32
847 30
44
44
10000
10000
181
181
400
400
Concrete/Steel Swivel Anchor The ClimbTechtm Concrete MEGA Swivels rotates through
portable use for horizontal lifeline systems, tie-back, staging and rigging. The CT105 Concrete Anchor requires a minimum hole depth of 19mm (3/4”).
Distributed in Europe by ISC Please contact us for further information
15
Technical Information
141cm (55 1/2 inches) 570cm (22 1/2 inches) 540cm (21 1/4 inches) 7 (inc weights) 25kg (55lb) 178kg (392lb) 250 kg (551lb) EN795:97 Type B 2 Man 600mm (24 inches)
Height Length Width No. of Component Parts Max Component Weight Total Weight SWL CE Certified Rated Use Minimum Upstand Required
The Deadweight Trolley is a Portable Anchor Device for use behind Structural Handrails, Balustrades
and Parapet Walls*. The Deadweight Trolley is ideal for use where space is limited. The Deadweight
Trolley is quick and easy to set up, store and transport.
Images not shown to scale
* Requires minimum upstand of 600mm (24”)
DW100 Deadweight Trolley
Height Length Width No. of Component Parts Max Component Weight Total Weight SWL CE Certified Rated Use Minimum Upstand Required
215cm (84 5/8 inches) 193cm (76 inches) 142cm (56 inches) 18 (inc weights) 25kg (55lb) 390kg (860lb) 250 kg (551lb) EN795:97 Type B 2 Man 300mm (12 inches)
Technical Information
Deadweight Anchors
DW200 Images not shown to scale
The A-Frame Anchor is ideal for use on flat roof surfaces*. The A-Frame can be moved sideways as
required, therefore saving job time, by reducing the need for re-rigging. The A-Frame has locking
wheels, to prevent unwanted movement. The A-Frame easily breaks down in to 6 pieces (plus 12
weights), for easy transport and storage.
* Requires minimum upstand of 300mm (12”)
A-Frame
17
Service & Repair
We now offer Service Training courses for our Tripod Systems. These courses
take place at the ISC Factory in North
Wales,
Tripod Fall Arrest Blocks
Weight > WLL >
Fall Indicator > Gate Type >
Wire Diameter >
9kg (20lb) 136kg (300lb) As standard Twistlock
5mm (3/16”)
UB171 15m (50ft)
The UB171 Fall Arrest Block has a cast Aluminium housing, making this block suitable for heavy-duty use, even in harsh environmental conditions. The UB171 is fitted with a retrieval winch, which can be easily engaged in emergency situations.
ISC Tripod Heads are manufactured from Cast Aluminium for strength and durability. The standard version (TP143) is fitted with two pulley wheels and removable captive pins keep the
Tripod also has two swivel-eye anchor points.
The Tripod legs are adjusted by R-Clip pins, up to a maximum overall height of 255cm (approximately 89”).
ISC Tripods are ideal for work and rescue in confined spaces.
Attachment Bracket
GRB150S2
A hard wearing Tripod bracket, for use with the ISC Tripod, Block or Winch system. The GRB150 anti-slip bracket is quick and easy to fit, with a hinged lid and screw design.
The block is fitted with a Swivel-eye
Karabiner, which has a load-
indicator. In the event of a fall, the
swivel eye will pull out a short way, exposing a red collar.
We manufacture brackets to fit a range of Tripods– please contact
further information.
Winch
The Rescue Winch is for use in lifting & lowering applications. We manufacture a range of Tripod attachment brackets.
The RW020 Rescue Winch has a working length of 20m (65ft)
The Rescue Winch is fitted with a Steel Swivel eye, double-action Snaphook as standard.
RW020
*Fees apply
WLL > 140kg (308lb)
Weight > 10.2kg (22.5lb)
Tripods & Accessories
TP143 Tripod (accessories sold separately)
Weight > WLL >
Max. Height >
27kg (60lb) 350kg (771lb) 255cm (9ft)
Basic Dimensions
255
225
cm
inches
100
89
920
680
150
122
26
36
48
59
19
Distributed by ISC Please contact us for further information
Gin Pole A-Frame Side A-Frame
Bridge Tripod/Quadpod Handrail Recovery
THE WORLD’S MOST VERSATILE MODULAR
TOTAL EDGE MANAGEMENT SYSTEM
The Arachnipod Total Edge Management System is an innovative design that captures multi-functional capabilities. Simplicity and robust engineering provide the world’s most versatile modular, total edge management system. Components can be added or removed to achieve any of the 8 possible configurations.
The Arachnipod in its basic form is a Tripod. It consists of three basic telescoping legs, each pivotally connected to an Anodised Head.
connect together with a Quik-link Pin (similar to a hinge), which allows quick and simple addition or removal of legs, or bridge beam, to create different configurations.
Each head has a D-shaped shackle for guying to stabilise the structure. The Pulley Leg has an inbuilt Pulley, which is mounted on two Stainless Steel Roller Bearings. The Pulley is Stainless Steel and has two grooves– one to take up to 13mm (1/2”) rope and the other to take up to 8mm (5/16”) wire cable. Stainless detent pins prevent the rope or wire from coming out of the grooves.
Slix100tm Stretcher
Slixtm Stretcher
finished material allows easy slide manoeuvring of the stretcher. The Slixtm can be rolled up widthways or lengthways, for ease of transport and storage. The webbing straps do not pass underneath the stretcher body, keeping them safe from abrasive damage as the stretcher is dragged over surfaces. The Slixtm stretcher is fitted with several durable web handles, to allow accuracy
whilst manoeuvring. The lifting strap anchors are positioned for optimal balance and easy of use as the stretcher is hauler in a horizontal or vertical orientation. Under tension, the lifting straps cause the stretcher to mould around the casualty, for addition support & security.
Technical Information
SL100
93/42/EEC CLASS 1
Max User Weight Code
Width
(cm) (inches)
Length
(cm) (inches)
36 92 91 230
(kg)
400
(lb)
881
material allows easy slide manoeuvring of the stretcher. The Slixtm can be rolled up widthways or lengthways, for ease of transport and storage.
Slix 100tm Stretcher
21
Photo courtesy of ClimbTech, USA
Total Kit Weight (packed)> 12kg (27lb)
Service & Repair
Become an Approved ISC Block Service & Repair Agent...
We offer Fall Arrest Block Service Training courses, which take place at the ISC Factory in North Wales, or can be arranged at your own premises*.
*Fees apply
Fall Indicators
following a fall.
ISC Fall Arrest Blocks* are fitted with a specialist Karabiner, which indicates when a fall has taken place.
Indicator Ring is exposed to identify that an inspection is required.
* Choice of hook available on Merlin
Fall Arrest Blocks
ISC Fall Arrest Blocks conform to CE and ANSI Standards.
Basic Dimensions
Width Code Name Height Width Height
UB033
UB066
UB100
UB050
UB051
UB170
UB171
Merlin 3.3m (11ft)
Merlin 6.6m (20ft)
Merlin 10m (32ft)
Webbing 5m (16ft)
Wire 5m (16ft)
Wire 15m (50ft)
Wire 15m (50ft)
Retrieval
110
160
190
150
150
200
200
4 3/8
6 1/4
7 1/2
5 7/8
5 7/8
7 7/8
7 7/8
150
190
290
210
210
340
340
5 7/8
7 1/2
11 7/16
8 1/4
8 1/4
13 3/8
13 3/8
Standards
NEW Merlintm 10m (32ft) Block
(mm) (Inches)
NEW
MERLINtm
All ISC Blocks have solid Aluminium Housings, proven to last in all sorts of environments, from rental to off-shore. The internal mechanisms are simple, making them easily serviceable.
The NEW Merlintm 10m (32ft) is the first in the new, improved range. The Merlintm Fall Arrest Blocks are lightweight blocks, with durable cast Aluminium housings.
The UB100 Merlintm is fitted with a Steel Swivel-eye, load-indicating Karabiner as standard. The UB100 has a total weight of only 4.34kg (9.7lb).
Weight > WLL >
Fall Indicator >
3kg (7lb) 136kg (300lb) As standard
UB050 5m (16ft)
Weight > WLL >
Fall Indicator >
1kg (2lb) 136kg (300lb) Optional
UB033 3.3m (11ft)
Weight > WLL >
Fall Indicator >
9kg (20lb) 136kg (300lb) As standard
UB171 15m (50ft)
Weight > WLL >
Fall Indicator >
3kg (7lb) 136kg (300lb) As standard
UB051 5m (16ft)
Weight > WLL >
Fall Indicator >
2kg (5lb) 136kg (300lb) Optional
UB066 6.6m (22ft)
Choice of Hook
Available
Choice of Hook
Available
Fall Arrest Blocks
Weight > WLL >
Fall Indicator >
9kg (20lb) 136kg (300lb) As standard
UB170 15m (50ft)
23
See pages 38-43 for
Karabiners & Snaphooks
See pages 38-43 for
Karabiners & Snaphooks
Progress Capture Pulleys
The latest range of ISC Progress Capture Pulleys (PCP) now feature a new lightweight centre plate, re-positioned wheel to reduce rope friction and a rated Becket, through which even an ANSI Karabiner can be fully rotated. All PCPs are fitted with tamper-proof rivets and are individually serial numbered. The cam-faces are coned (rather than spiked) to minimise rope wear.
Progress-capture Pulleys incorporate a cam which (when
lifting/pulling a load or tensioning a line. To lower/release the line the cam must be manually unclamped by using the flexible Dyneema release cord and held/pinned clear of the rope during the lower/release of the line.
One-way Locking Bearings
bearings (when roped correctly) will not turn, which means
operator much more control. Progress-capture pulleys can be used in all sorts of applications, such as hauling, tensioning & work positioning heavy loads.
Features & Applications
Double Rescue Pulleys
Progress Capture Pulleys –Single
(kN)
MBS
(lbf)
40
30
8992
6744
40
30
8992
6744
40
30
8992
6744
Weight
(oz) (g)
23
23
660
649
23
24
663
672
32
32
905
900
Progress Capture Pulleys –Double
Type
Standard
One-way Bearings
Standard
One-way Bearings
Standard
One-way Bearings
Code
RP701
RP700
RP702
RP704
RP703
RP705
Technical Information
Coned Cam-face To minimise rope wear
4 : 1 Mechanical Advantage
System
RP700/701
RP702/704
RP703/705
R-ALFtm Rescue Auto Locking Pulley
The R-ALFtm has an over-speed brake built in so that it will automatically lock and hold when a fall occurs. The
pick-off kit or a 5:1 hauling kit –and whichever combination is used if the user ever loses control of the descent the over-speed brake will automatically kick-in.
Features & Applications
limitation to ‘height of lift’ being rope stretch and/or kit weight.
The R-ALFtm can be used as part of a work suspension
themselves off by using a hand ascender and a short strop.
The unique design of the R-ALFtm means that an internal
capable of several thousand cycles and many arrests*.
The Standard R-ALFtm (RP431) locks in both directions. The LH-ALFtm Device (RP433) locks in one direction only and therefore the device will only lock to arrest a fall, leaving the user free to haul at higher speeds, without accidentally engaging the locking mechanism.
apply
Technical Information
MBS Weight
(kN) (lbf) (oz) (g)
Code Type
-
50
50
-
11240
11240
44
19
8
1243
526
235
RP431
RP064
RP065
R-ALF (WLL 250kg/550lb)
Double Prussik
Single Prussik
(Other Heights of Lift available on request) 2 : 1 LH-ALF Kit
KT431A2-010 10m H.O.L. (two-way locking)
KT433A1-010 10m H.O.L. (one-way locking -for Material Handling only)
(Other Heights of Lift available on request) 3 : 1 R-ALF Kit
KT431A1-010 10m H.O.L (two-way locking)
(Other Heights of Lift available on request) 5 : 1 R-ALF Kit
The above kits are supplied with Rope to allow for 10m / 32ft Height of Lift (other HOL available), Ropebag & Instructions
Standard Kit Contents
5 : 1 Kit
3 : 1 Kit
Components 2 : 1 Kit
R-ALF Hauler (2 –way Locking)
LH-ALF Hauler (1-way Locking)
Atlas Scaffold Anchor Connector
Medium Single Prussik (No Becket)
Medium Single Prussik (Becket)
Medium Double Prussik (Becket)
Professional Hand Ascender
0
1
1
1
0
0
0
1
0
1
0
2
0
2
1
0
1
0
0
2
2
RP431
25
ALFtm Climb Assist Pulley
The ALFtm is designed for climbing vertical structures such as ladders and is ideal for use in Ropes Courses. Fall distance is limited to a few centimetres.
be incapacitated, but if this happens a rescue can easily be organised from ground level, unlike the majority of fall
arrest devices where a rescuer must climb up (therefore putting himself at risk) to make the rescue.
View the ALFtm Demo Video:
www.youtube.com/iscmarketing
How it Works
locking system, which combines a speed sensitive inertia locking brake system, with a grooved pulley wheel. At low speed (during normal use), the rope runs freely through the pulley. In the event of a fall, the rope speed increases causing the inertia brake to kick in, to promptly arrest the fall. Fall distances are extremely short, so in most cases the fallen user can regain their grip on the structure and resume their climb, without the need for assistance/instruction.
The ALFtm Pulley is a two-way locking device which can be rigged in a continuous loop system with Alpine Butterfly attachment loops at opposing ends of the system. This
always an attachment loop present, allowing the next user to immediately commence their climb/descent.
Applications
The ALFtm Climb Assist Pulley was developed with users in
mechanical method of protecting multiple climbers en route around a ropes course. The ALFtm provides a simple, cost effective solution, which utilises industry standard (EN1891) low-stretch 11mm (7/16”) rope. The continuous
competent person.
The ALFtm Climb Assist Pulley can also be used as a solution
construction applications.
Alpine
Butterfly
Attachment
Loop, with Karabiner
Technical Information
(g)
Weight
(lb)
1330
463
3
1
MBS
-
15736
-
70
(kN) (lbf)
Code
RP430
RP066
ALF Climb Assist (WLL 140kg/310lb)
Large Single Prussik
Type
RP430
ALF Climb
Assist Pulley
RP066
Large Single
Prussik
Rigging
Photo courtesy of ZIPStream Aerial Adventure Parks
How it Works
KY005 Wire Key KY004 Ring Key
(g)
Weight
(oz)
316
130
36
36
11
5
1
1
MBS
5620
5620
N/A
N/A
25
25
N/A
N/A
(kN) (lbf)
Code
RP420
KY004A
KY005A
KY005B
SmartSnap
Ring Key
Wire Key [for 13mm (1/2”) Wire]
Wire Key [for 10mm (3/8”) Wire]
Type
Technical Information
Figure 1 Figure 2 Figure 3 Figure 5 Figure 4
SmartSnaptm is a self-belay system which allows a user to traverse all the individual elements of a course without ever being able to detach from the line. SmartSnaptm is really simple to use and therefore doesn’t require in depth user training; it is lightweight and is therefore perfectly suitable for children to use. The SmartSnaptm has been designed so that it can easily be retro-fitted to an existing course.
View the SmartSnap Demo Video: www.youtube.com/iscmarketing
“
” ”
We love the SmartSnap system because it embodies two critical
values that are central to our operating ethos; it provides 100% tie-
off security by disallowing unintentional disconnection from the belay
system, while also retaining participant involvement in the transfer process. It’s an ingenious product and is the standard belay system
we use for our brand of ZIPStream Aerial Adventure Parks.
“ingenious” Don Stock, President
ZIPStream® Aerial Adventures
“ “user friendly”
William Moyle, Site Manager Bedale Aerial Extreme Ltd
Each course user wears a SmartSnap Device, attached to their harness by a short lanyard. At the beginning of the course, the
Supervisor attaches red gate of the SmartSnap to the wire [Figure 1] and locks the gate, using the wire-mounted key [Figure 2].
The user then travels to the next change-over point, where they clip the blue gate on to the Ring Key lanyard [Figure 3]. The
user then inserts the spike of the Ring Key in to a hole [Figure 4]. This action simultaneously locks the Blue gate AND unlocks
the Red gate [Figure 5], releasing the user from the previous element, and allowing them to safely attach to the next element.
upgrade its safety system without the need for an expensive
course re-design and re-fit. The user friendly SmartSnap has meant
that we are now able to allow children as young as 6 year old on the course.
27
Special Projects
Visitors to the Zipworld attraction take flight on the ‘Little Zipper’ 450m (1476ft) long Zipline and the ‘Big Zipper’, the 1750m (5741ft) long Zipline which plunges down over the quarry from the 213m (700ft) high summit!
When approached to manufacture a Zip Trolley worthy of the task, we got straight on to it...
Wayne Ellis, ISC Commercial Director
The Brief
The Snowdonia National Park in North Wales was to become home to the UK's Heart of Adventure
A Zipline this big and this fast needed a trolley
serious work went into the Zipline construction,
harness.
ZipWorld has two Zip lines on site in Penrhyn Quarry. The ‘Little Zipper’ is a 450m (1476ft) long line, but the main attraction for the adrenaline hungry thrillseekers is the 1750m (5741ft) ‘Big Zipper’! Those brave enough to take on the Big Zipper will fly down the quarry at speeds in excess of 75mph (110kph)!
ZipWorld site- Penrhyn Quarry, North Wales
To achieve this kind of speed, a very special Zipline Trolley was needed. The ZipWorld Trolleys needed to be big, but not too heavy. The trolleys
environmental conditions. Each trolley is fitted with top grade wheel bearings, which are capable of running at high speeds and perform consistently within a wide range of temperatures. The wheels are made from a special material, which is capable of tens of thousands of zip miles, without causing undue wear to the cable. The wheels also offer a low decibel output during the flight.
[Right] The Zipworld Trolley, manufactured by ISC
Kevin Thomas, ISC Goods Inwards Coordinator
Adam Davies, ISC Customer Service Denny Moorhouse, ISC Chairman
Zipspeed Tandem Trolleys
The NEW ISC Zipspeed Tandems represent industry leading Zipline Trolley innovation at its most affordable! The design of these mid-size trolleys uses state of the art engineering techniques to ensure that they run and run. Lightweight but tough, they offer several unique features. The new trolleys have been trialled and are in use at several major parks around the world. These are possibly the fastest, strongest & most durable Zipline Trolleys in
their class.
Weight
(oz)
876
874
875
31
31
31
(g)
Technical Information
(kN)
MBS
(lbf)
40
40
40
8992
8992
8992
Axle Colour
40
40
40
8992
8992
8992
63
63
63
1796
1794
1789
RP075A
RP075B
RP075C
13mm (1/2”) Wire
16mm (5/8”) Wire
20mm (3/4”) Wire
50mm (2”) Diameter Wheels
Code Type
RP076A
RP076B
RP076C
13mm (1/2”) Wire
16mm (5/8”) Wire
20mm (3/4”) Wire
75mm (3”) Diameter Wheels
Features & Applications
[Top Elevation]
Zipspeed Trolleys are fitted with special Rubber-sealed, Deep Groove Ball Bearings as standard. These Bearings have been chosen for optimal high speed, low friction performance. The rubber seals retain the grease lubricant, whilst defending the Bearings from moisture and contaminants; giving the Zipspeed a lifespan of several thousand miles/kilometres.
The Zipspeed Trolleys are fitted with a rubber brake-buffer* to absorb impact load at the end of the run and have several attachment hole options, including an extra
Karabiners and Snaphooks. The rear attachment hole can be used to attach a secondary lanyard and the small central hole can be use to attach an accessory bar/handle.
*Replaceable wear item
Zipspeed Trolleys are available with 50mm (2”) or 75mm (3”) Diameter wheels, to suit lines of varying tension, gradient & speeds.
We also offer versions to suit 13mm (1/2”), 16mm (5/8”) or 20mm (3/4”) Wires and each Trolley is fitted with a colour coded collar for quick, easy identification.
Options
optimal high speed, low friction performance.
Colour-coded
identification collar
RP075 RP076
29
Shear Reduction/Top Roping
RP029 Fixed Wheel Shear Reduction
Block
Features & Applications
The RP029 Shear Reduction Pulley is made from Stainless Steel and fitted with a top bollard attachment point. The wheel of this pulley does not rotate, giving maximum friction.
control when used in lowering applications, such as top roping in Climbing Walls/Gyms and Ropes Courses.
Single Prussik Pulleys, in Aluminium and Stainless Steel. See pages 32 & 33 for further information.
Shear Reduction Pulley
RP029
Fixed Wheel Shear Reduction
820
29
13
1/2
45
10116
Stainless Steel
Technical Information
Code Weight
(g) (oz)
MBS
(kN) (lbf)
Wheel Material
(mm) (Inches)
Max Rope Ø
RP012 Small Single RP030 Small Double RP031 Double Re-direct RP032 Medium Single
RP033 Medium Double RP034 Medium Single RP037 Micro (rated bridge)
RP037C Micro Stainless Steel
31
Technical Information
Code
RP012
RP030
RP031
RP032
RP033
RP034
RP037
RP037C
Small Single
Small Double
Double Re-direct
Medium Single
Medium Double
Medium Single (Double Ended)
Micro Pulley (12kN Rated Bridge)
Micro Pulley (Stainless Steel)
Eiger Pulleys
13
13
13
13
13
13
13
13
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Weight
(g) (oz)
87
150
126
158
284
181
90
174
3
6
5
6
10
6
3
6
MBS
(kN)
36
35
30
36
36
36
28
40
(lbf)
8093
7868
6744
8093
8093
8093
6295
8992
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Stainless Steel
Wheel Material
(mm) (Inches)
Max Rope Ø
ISC lightweight Eiger Pulleys are made from high strength Pulleys are fitted with Bushings, which are ideal in lightweight applications.
Eiger Lightweight Pulleys
Pulleys– Heavy Duty Prussiks
All Pulleys in our latest Prussik range have tamper-proof Rivets, in compliance with CE EN12278 (2007)
Reduction versions are available on request*.
40
40
50
50
50
70
70
70
8992
8992
11240
11240
11240
15736
15736
15736
13
13
13
13
13
16
16
19
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
Weight
200
340
280
500
215
463
760
440
7
12
10
18
8
17
27
16
(g) (oz)
MBS
(kN) (lbf)
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
NO
YES
NO
YES
YES
NO
YES
NO
RP060
RP061
RP063
RP064
RP065
RP066
RP067
RP069
Small Single
Small Double
Medium Single
Medium Double
Single with Becket
Large Single
Large Double
Extra Large Single
Part Becket Wheel Material
Aluminium
Technical Information
Max Rope Ø
(mm) (Inches)
Bushings Ideal for high loads
at low speed
Roller Bearings Ideal for low loads
at high speed
RP060
RP061
RP063
RP064
RP065
RP066
RP067
Part
Stainless Steel
Technical Information
13
13
13
13
13
16
16
1/2
1/2
1/2
1/2
1/2
5/8
5/8
NO
YES
NO
YES
YES
NO
YES
Small Single
Small Double
Medium Single
Medium Double
Single with Becket
Large Single
Large Double
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Weight
372
674
584
1036
413
896
1626
14
24
21
37
15
32
58
(g) (oz)
MBS
40
40
50
50
50
50
50
(kN)
8992
8992
11240
11240
11240
11240
11240
(lbf)
Becket Wheel Material Max Rope Ø
(mm) (Inches)
33
indentify the correct Block for the task. We have introduced a new fixed bollard dimension, which allows the user to fall in-line with rigging standard practice, whereby the Anchor/Topping Strop should be twice the strength of the Working Line.
Rounded Plates Markings Plate Wider Profile
Features
Cast Rigging Pulleys
Accommodates larger Topping Strops
Quick, easy Pulley identification
Smooth edges minimise rope wear
RP050
RP051
RP054
RP055
RP056
RP057
2000
2000
3000
3000
2000
4000
4400
4400
6600
6600
4400
8800
13
16
16
19
16
19
1/2
5/8
5/8
3/4
5/8
3/4
4500
7720
7720
10630
7720
10630
9900
17000
17000
24000
17000
24000
19
25
25
29
25
29
3/4
1
1
1 1/8
1
1 1/8
10630
17180
17180
21270
17180
21270
24000
37800
37800
46800
37800
46800
Technical Information
Part Code
Side Cheeks
Pulley Wheel
Working Line Topping Strop WLL
(kg) (lb)
Size
(mm) (Inches)
MBS
(kg) (lbf)
Size
(mm) (Inches)
MBS
(kg) (lbf)
Unit Weight
(kg) (lb)
1.8
1.8
2.5
2.5
1.6
3.8
3.5
3.5
5
5
3.5
8.5
Chamfered Pin Head
For quick, easy location of the Spring-lock Pin
RP056 Flame RP054 RP050
RP057 RP055 RP051
TRIED, TESTED...
35
Portawraps
ISC Portawraps are designed for lowering loads of up to 1000kg, with consistent friction for total control. ISC Portawraps have main and secondary attachment points , to offer extra stability of the device against the tree.
giving a bend ratio of approximately 3.5 : 1 and can be used with ropes of up to 13mm (1/2”), to lower loads of up to 750kg (1653lb).
The large Portawrap (AE160) has a 75mm (3”) diameter, giving a bend ratio of approximately 4.5 : 1 and can be used with rope of up to 16mm
captive attachment points, where Karabiners can be attached around the working line, to keep the working line in place.
Application & Features
Weight > SWL >
Max Rope >
2.7kg (6lb) 1000kg (2200lb) 16mm (5/8”)
AE160 Large
Weight > SWL >
Max Rope >
2.3kg (5lb) 750kg (1653lb) 13mm (1/2”)
AE150 Small
NOTE: The STRW is not for primary life support. The hitch provides the
primary life support.
The smaller, lighter design works well with the stiff tether, which keeps the STRW away from the hitch. The ZK-2 Rope
of a Pulley wheel keeps the rope round, so there’s less rope flattening than with the ZK-1 version.
ZK-2 New Features
The Rope Wrench is a unique and innovative device, designed by Kevin Bingham of Singing Tree. The STRW allows so many more options for safe movement in the tree
friction control than that achieved using double rope. The STRW allows far greater flexibility and opens up a wide range of new working possibilities. In double rope climbing, friction levels never remain constant due to rope running over limbs, re-directs and Pulleys. The STRW
technique). The STRW also allows the user to easily pass any limbs which obstruct their route- it is possible to pass obstructions when using DRT, but it can be a very tricky manoeuvre!
How it works
Rope Wrench
The Singing Tree Rope Wrench (STRW) creates a “bend” above the climbers hitch on the single line which, with the addition of the tether to connect to the STRW, creates a “contained doubled rope
the tree allowing for a level of consistency of friction on the hitch which is impossible to duplicate in doubled rope climbing.
The Singing Tree Rope Wrench (STRW) is manufactured and distributed by ISC
RP280
Kit Code KT280
126g (5oz)
RP281 Rope Wrench Pulley
(Parallel Sides)
37
Aluminium Karabiners
ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Aluminium Karabiners are of sleek ergonomic design, with a high strength to weight ratio.
Aluminium Karabiners
H W
P Captive Pin Available
Captive pins can be fitted to keep lanyard/webbing in place, to prevent unwanted rotation, therefore reducing the risk of side loading. Captive pins are supplied loose and can be easily fitted as necessary.
Options
F Fall Indicator Available
Swivel-eye Karabiners can be supplied with fall indicating rings. In the event
the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.
Colour Coded
ISC Aluminium Karabiners have colour-coded Barrels/Ferrules for quick, easy identification.
Basic Dimensions
Code
Name
KH214
KH204
KH411
KH453
KH452
KH451
KH301
KK215
KH255
Mini HMS
HMS
Luke
Gator
Gecko
Mongoose
Captive Eye
Link
Twister
74
78
70
65
75
88
75
61
72
(mm) (inch)
4
4 7/8
4 3/8
4 1/8
4 1/2
5 1/4
5 3/8
4 1/2
6 7/8
3
3 1/3
2 3/4
2 1/2
3
3 1/2
3
2 3/8
2 7/8
102
124
112
105
115
133
137
113
175
H W
Gate opening measurements are approximate, based on Supersafe Gates
Supersafe (triple-action)
Lift, turn, open
Quadlock (quad-action)
Turn, lift, turn, open
Blind Nose
ISC Performance Karabiners are forged with a blind nose, to prevent snagging.
B Blind Nose UNIQUE to ISC
Screwgate
Unscrew, open
Twistlock (double-action)
Turn, open
SSQ
TL
SS
SG
The KH453 Gator Bentgate is ideal for use as a Toolhook and
Restraints.
NOT for PPE
Bentgate Karabiners are NOT for use as PPE purposes and are marked accordingly.
SSQ
TL
SS
B
Weight > Gate Opening >
MBS >
80g (2.8oz) 20mm (3/4”) 25kN (5620lbf)
KH411 Luke Oval
Weight > Gate Opening >
MBS >
98g (3.5oz) 19mm (3/4”) 27kN (6070lbf)
KH214 Mini HMS
Weight > Gate Opening >
MBS >
103g (3.6oz) 22mm (7/8”) 27kN (6070lbf)
KH204 HMS
Weight > Gate Opening >
MBS >
118g (4.2oz) 24mm (1”) 30kN (6744lbf)
KH451 Mongoose
Weight > Gate Opening >
MBS >
47g (1.7oz) 15mm (5/8”) 25kN (5620lbf)
KH453 Gator
Weight > Gate Opening >
MBS >
86g (3oz) 21mm (7/8”) 30kN (6744lbf)
KH452 Gecko
Bentgate Karabiners
Weight > Gate Opening >
MBS >
46g (1.6oz) 22mm (7/8”) 25kN (5620lbf)
KH453BG Gator Bentgate
B
Weight > Gate Opening >
MBS >
88g (3.1oz) 30mm (1 1/8”) 25kN (5620lbf)
KH204BG HMS Bentgate
SSQ
TL
SS
SG B
SSQ
TL
SS
SG
SSQ
TL
SS
SG B
142g (5oz) 15mm (5/8”) 27kN (6070lbf)
KH255 Twister
Weight > Gate Opening >
MBS >
Weight > Gate Opening >
MBS >
99g (3.5oz) 20mm (3/4”) 30kN (6744lbf)
KH300 Captive Eye
Weight > Gate Opening >
MBS >
90g (3.2oz) 15mm (5/8”) 25kN (5620lbf)
KH215 Link
P
SSQ
TL
SS
SG B
F
B
SSQ
TL
SS
SG
SSQ
TL
SS
SG B
SSQ
TL
SS
SG B B
B
39
P
Steel & Stainless Steel Karabiners
ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Steel Karabiners are of sleek ergonomic design, with a high strength to weight ratio.
Basic Dimensions
Code Name
KH219
KH455
KH212
KH202
KH311
KH200
KH260
KK308
KH301
KH307
KH415
KH305
KK400
KH407
Iron Wizard (S)
Big Dan
HMS
Klettersteig
Oval
Offset D
Twister
D Shape
Captive Eye (S)
Firemans
Iron Wizard (L)
Captive Eye (L)
Atlas
Scaffold
4 7/8
5 3/8
5
4 7/8
4 1/8
4 1/2
6 7/8
4 1/8
5 3/8
6 7/8
7
7 3/8
7 7/8
9 1/2
125
137
127
125
106
113
175
105
136
173
180
188
200
240
72
86
80
85
58
63
75
55
76
95
102
107
145
135
2 7/8
3 3/8
3 1/8
3 3/8
2 1/4
2 1/2
3
2 1/8
3
3 3/4
4
4 1/4
5 3/4
5 3/8
(mm) (inch)
H W H W Twistlock (double-action)
Turn, open
Screwgate
Unscrew, open
Supersafe (triple-action)
Lift, turn, open
Quadlock (quad-action)
Turn, lift, turn, open
Options
F Fall Indicator Available
Swivel-eye Karabiners can be supplied with fall indicating rings. In the event
the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.
P Captive Pin Available
(supplied loose)
F Fall Indicator Available
When a fall occurs, a
red indicator ring is
exposed
B
ANSI Compliant
(3600lb) Barrels
available
Gate Options
Gate opening measurements are approximate, based on Supersafe Gates
Nose Types
K
Blind (Non-Snag) noses as standard
Choice of Standard Hook nose or Keelock Non-snag nose
Weight > Gate Opening >
MBS >
264g (9.3oz) 28mm (1 1/8”) 70kN (15736lbf)
KH219 Iron Wizard (Small)
Weight > Gate Opening >
MBS >
365g (12.9oz) 27mm (1 1/8”) 50kN (11240lbf)
KH455 Big Dan
Weight > Gate Opening >
MBS >
276g (9.7oz) 23mm (7/8”) 50kN (11240lbf)
KH212 HMS
SSQ
TL
SS
SG
SSQ
TL
SS
SG
SSQ
TL
SS
SG
P
B B
Side opening
Weight > Gate Opening >
MBS >
250g (8.8oz) 26mm (1”) 50kN (11240lbf)
KH202
Weight > Gate Opening >
MBS >
188g (6.7oz) 18mm (3/4”) 25kN (5620lbf)
KH311 Oval
Weight > Gate Opening >
MBS >
255g (9oz) 20mm (3/4”) 50kN (11240lbf)
KH200
TL
SS
SG
TL
SS
SG
TL
SS
SG
P P
B
Weight > Gate Opening >
MBS >
175g (6.2oz) 17mm (5/8”) 35kN (7868lbf)
KH308
Weight > Gate Opening >
MBS >
261g (9.2oz) 18mm (3/4”) 50kN (11240lbf)
KH301 Captive Eye KH260 Twister
Weight > Gate Opening >
MBS >
348g (12oz) 18mm (3/4”) 40kN (8992lbf)
SSQ
TL
SS
SG
TL
SS
SG
SSQ
TL
SS
SG
B
F
B
41
K
K
K
K
Weight > Gate Opening >
MBS >
400g (14.1oz) 48mm (1 7/8”) 40kN (8992lbf)
KH307 Firemans
Weight > Gate Opening >
MBS >
540g (19oz) 33mm (1 1/4”) 70kN (15736lbf)
KH415 Iron Wizard (Large)
Weight > Gate Opening >
MBS >
395g (14oz) 45mm (1 3/4”) 40kN (8992lbf)
KH305 Captive Eye (Large)
Weight > Gate Opening >
MBS >
816g (28.8oz) 57mm (2 1/4”) 45kN (10116lbf)
KH400 Atlas
Weight > Gate Opening >
MBS >
678g (23.9oz) 53mm (2 1/8”) 35kN
KH407 Scaffold Hook
TL
SS
SG
TL
Stainless Steel
TL
SS
SG
P
P
TL
SS
TL
SS
TL
Weight > Gate Opening >
MBS >
255g (9oz) 20mm (3/4”) 35kN (7868lbf)
KH200
Weight > Gate Opening >
MBS >
174g (6.1oz) 16mm (5/8”) 22kN (4946lbf)
KH308
TL
SS
SG
Weight > Gate Opening >
MBS >
286g (10oz) 27mm (1 1/8”) 50kN (11240lbf)
KH219 Wizard
TL
SS
TL
SS
SG
Side opening
P
P
B B
B P
Side opening
Weight > Gate Opening >
MBS >
400g (14.1oz) 48mm (1 7/8”) 40kN (8992lbf)
KH307 Firemans
Weight > Gate Opening >
MBS >
269g (9.5oz) 22mm (7/8”) 35kN (7868lbf)
KH202
TL
SS
Weight > Gate Opening >
MBS >
235g (8.3oz) 18mm (3/4”) 23kN (5171lbf)
KH250 Twister
TL
SS
SG
P F
B
P
Side opening
Snaphooks
Locking Nose
SH979
SH999
B
3
B SH903 SH901
F SH824 SH826
F
B
3
F
B SH904 SH905
30 6744 387 13 20 SH826 Double Action
(Fall indicating versions available )
3/4
Steel Snaphooks– Swivel
27 6070 287 10
7/8 21 SH824 Double Action
Standard
30
35
6744
7868
514
495
18
17
2 1/4
2 3/8
65
60
SH979
SH999
Double Action
Double Action, Locking Nose
Large Scaffold Snaphooks– Aluminium
7/8
7/8
1
23
23
26
(kN)
(lbf)
27
27
27
6070
6070
6070
MBS Weight Gate Opening
Code Type
(oz) (g)
4.4
4.5
11.5
125
128
319
(mm) (inch)
SH901
SH903
SH901P
Double Action
Triple Action
Double Action
Standard Snaphooks– Aluminium
27
27
6070
6070
191
200
7.0
7.2
7/8
7/8
22
22
SH904
SH905
Double Action
Triple Action
Swivel Snaphooks– Aluminium (Fall indicating versions available)
Technical Information
43
F
NEW Stainless Steel version Also available with triple-action gate
3
Small Aluminium Snaphooks are available with the
increased gate security.
supplied with fall
indicating rings. In the event of a fall, the red ring is
exposed, altering the user that a fall has taken place.
B SH901P
Triple-action Gate
Images not shown to scale
Tactical Finishes
Ascent and Descent devices. Our range caters for Special Forces Black Tactical, Military and NATO operations.
Specialist finishes are available across a range of products including Karabiners, Pulleys & specialist devices. Please contact us to discuss your requirements.
RP120 Micro Figure 8
Matt Black Sand Olive Drab
45
BU182
BU180
BU183
BU184
BU185
Supplied with Tang & 3 Bar Slide -20kN (4496lbf)
Code Weight
(oz) (g)
4.9
4.4
138
124
4.3
3.9
3.3
122
108
94
8.7 248
BU180
BU183
BU182
BU184
BU185
BU190
Buckle Size
45
25
1 3/4
1
(mm) (inch)
45
25
25
1 3/4
1
1
Tang Size
45
45
1 3/4
1 3/4
(mm) (inch)
45
45
25
1 3/4
1 3/4
1
45 1 3/4 45 1 3/4
Supplied with Tang & 3 Bar Slide– 20kN (4496lbf) (Stainless Steel)
Supplied with Sliding Bar Tang -16kN (3597lbf)
Technical Information
Klick-lock Buckles
We manufacture a wide range of Buckles & Fittings. If you are looking for a Buckle/Fitting which is not shown, please contact a member of our Customer Services Team.
Black versions also available NEW Stainless Steel version
BU190
Buckles & Fittings
BU170
BU173
Chest Ascender
designed for use on a full body harness, and therefore it is ideal for use in Rope Access work.
The cam is spring-loaded and fitted with a catch mechanism, to allow for easy one-handed operation of the device whilst attaching/removing the device to/from the rope.
Suitable for use on 9-13mm (5/16-1/2”) Rope.
The Chest Ascender has an increased grip at low load, even on wet, greasy/oily ropes. The spikes are angled downwards, giving maximum grip, whilst allowing the cam to slide easily up the rope.
RP229
Adjuster Buckles
Weight
(oz) (g)
Technical Information
Web Adjuster Buckles
2.1
4.0
3.5
2.3
60
112
100
65
Size
(mm) (inch)
1 3/4
3
3
1 3/4
45
75
75
45
BU171 Aluminium
BU173 Steel
BU174 Steel
Code
BU171
BU174
BU102/106 BL121/122 BU102G BU121E
BU200 BU101 AP184
SH101 DD302 BD304
BD307 BD600D BD600C
RIN0012
RIN0013
RIN0010
RIN0011
Technical Information
Code Weight
(oz) (g)
Size
(mm) (inch)
3 Bar Slides– Stainless Steel
Square Links– Stainless Steel
BU102
BU106
BL121
BL122
1
1.4
30
40
1.2
1.6
34
45
45
50
1 3/4
2
45
50
1 3/4
2
3 Bar Slides– Steel (*Heavy-duty)
BU200*
BU101*
1
1.6
3.4
30
46
102
1 3/4
2
3
45
50
75
AP184 1.7 48
Sliding 3 Bar– Steel
45 1 3/4
Square Links– Steel
BL121E 1.2 35 45 1 3/4
Compact Hook
SH101 2.8 78 50 2
Pressed Delta
BD302 2.5
72
45
1 3/4
D-Ring– Steel
2.7 76 2 50
D-Ring with Leg– Stainless Steel
3.0 86 2 50
D-Rings– Aluminium
BD600D Flat
2.9
2.9
82
82
1 3/4
1 3/4
45
45
Aluminium Rings– 25kN MBS
RIN0011 Large
1.3
1.9
38
54
-
-
-
-
Steel Rings– 70kN MBS
RIN0013 Large
4.1
5.9
118
166
-
-
-
-
Ring Dimensions:
Small Ring:
ID= 27mm (1 1/8”)
OD= 51mm (2”)
Large Ring:
ID= 45mm (1 3/4”)
OD= 70mm (2 3/4”)
ID= Internal Diameter OD= Outside Diameter
47
Quick Release Buckles (QRB)
We manufacture a wide range of Quick Release Buckles for the Motor Racing Industry, to suit FIA/SFI standards requirements.
Photos courtesy of Corbeau Seats/Luke Racing
Body Type
Lids
QRBs fitted with a Rotary mechanism release their tangs as soon as the user begins to rotate the lid. With the
Motion helps to prevent accidental opening.
Buckle Opening
Specialist Models
We also manufacture a Stainless Steel QRB. This QRB is ideal for use in off-shore & Helicopter SAR use.
Positioning
QRBs can be supplied with a fixed tang in any position, to allow for driver preference.
ISC Tangs are stamped and have ergonomic, rounded edges. Standard Tangs are available in flat, or 20o cranked versions. Standard Tangs are available with a Silver or Black finish. Long Moustache Tangs are also available.
AP154C Cranked, Black AP154A Cranked, Silver
Tangs
AP153 Moustache Tang, Silver
AP150A Flat, Silver AP150B Flat, Black
QR171 Full Lug Lid (FIA) QRB Streamline, Lost Motion Mechanism (Parking)
QR173 Half Lug Lid (SFI) QRB Streamline, Lost Motion Mechanism (Parking)
QR153 Machined Lid QRB Standard, Rotary Mechanism (Parking)
QR174 QRB Streamline, Lost Motion Mechanism (Non-Parking)
49
1. Incorporation of Conditions of Sale
sold by the seller subject to these
stipulated
or referred to by the buyer, whether in the order or in any document
conditions of sale are the only terms or conditions upon which the
seller sells or supplies the goods.
2. Payment
I) Where credit terms apply, payment is due within 30 days of the
date of the seller’s invoice to the buyer.
II) If any payments due to the seller are not made on the due date the
seller reserves the right to suspend any or all the deliveries of goods
ordered by the buyer and/or by notice in writing to the buyer to cancel
the contract without being liable for the consequential loss.
III) The seller reserves the right to charge the buyer interest on any
sum outstanding beyond the period of credit allowed at the rate of 2% per month or part of a month.
IV) Accounts are strictly net and remittances by cheques should be
accompanied by the remittance advice, indicating the invoices being
settled.
3. Credits
acknowledged by the seller’s official credit note.
4. Delivery
I) Stated delivery terms shall not be binding on the seller. The seller
shall not in any event be liable for any cost or damage caused by any
reason of any delay in delivery.
Ii) A goods delivery will be assumed to have been made unless proof
of delivery is requested within 14 days of invoice date. The buyer
shall be deemed to have examined the goods at the time of delivery.
5. Force Majeure
The seller shall not be liable in any way for loss or damage arising
directly or indirectly through or in consequence of delivery of the goods being prevented or delayed by happenings or occurrences due
to or by reason of mobilisation, hostilities, acts of the Queen’s enemies
or war (whether declared or not), government action, departmental
instructions or act of god, riots, combination of workmen, lockouts,
strikes or disturbances wherever taking place, shortage of labour, raw
materials, fuel or power in consequence of non-delivery or any other
cause, want of transport, accidents, fire, flood, blocking of or accidents
advertised times, reduction or stoppage of output at the works where the goods are being manufactured or premises to which they are to be
provision to the seller of any materials information or instructions
pertinent to the fulfilment of the order for the goods by the seller, or
any other causes or any circumstances whatsoever beyond the seller’s
and in these circumstances the seller expressly reserves the right to
cancel or suspend the whole or any part of any delivery.
6. Quantities
will be stated in the invoice.
7. Warranty and Liability
I) T
set out in the seller’s published literature in relation to the goods current at
the date hereof and made available to the buyer and that the goods
are of merchantable quality.
II) The application, use and processing of the goods is the absolute
writing or by way of trials or tests, is given without warranty as to the
suitability of the goods for their intended purposes and applications.
III) The buyer shall be deemed to have examined the goods at the
time of delivery and unless notice of any defect is given by the buyer and received by the seller within 14 days after delivery the seller shall
be relieved and discharged from any liability in respect thereof.
IV) The foregoing paragraphs inclusive shall apply save that if any act
of parliament or other statutory provisions for the time being in force
shall avoid or make enforceable any of the provisions thereof such
paragraphs shall be deemed to apply with the exclusions of those
provisions thereof which shall be void or enforceable as aforesaid.
8. Patents and Trade Marks
I) No warranty or representation is given by the seller that the goods
do not infringe any letters patent, Trade Marks, registered designs or
other industrial rights.
9. Assignments which these conditions form part is personal to the
buyer who shall not assign the benefit thereof without the seller’s
written consent.
10. Proper Law
The construction, validity and performance of this contract shall be
governed by the law of England.
11. Property and Risk
I) Delivery of the goods shall be:
A) Where the seller undertakes delivery of the goods when they are
loaded off the seller’s vehicle, ship or other transport at the station
port or address specified by the buyer,
B) Where the buyer undertakes to collect the goods, when they are
loaded onto the buyer’s vehicle or other transport at the address of
the seller. II) Passing of property:
Terms & Conditions
B)
prejudice to any of his other rights) recover or resell the
goods or any of them and may enter upon the buyer’s premises for
that purpose. C) I
nevertheless be and remain with the seller until such payment has
been made.
D) The buyer agrees to store all such goods in such a way that they are
readily identifiable as the property of the seller.
E) Where any goods delivered under this contract have been sold by
the buyer then the buyer shall so sell as agent for the seller and shall
be trustee for the seller of the proceeds of sale thereof until such time
as the seller shall have been paid in full for such goods. F) Notwithstanding the provisions in sub-clause (A) hereof the sold
goods shall be at the risk of the buyer from the time when they cease
to be
Warehouseman or other Bailee or agent for the purpose of
transmission whether such persons be in contract with or instructed by
the seller or the buyer.
12. Default
distress or execution shall in the sole opinion of the seller, be unable to
receiver appointed of its assets, or pass any resolution to be wound
up, or being a person shall commit any act of bankruptcy, or have any bankruptcy petition presented against it, then in any such event the
seller shall, without prejudice to any other rights and remedies it might
have and without any liability whatsoever, be at liberty forthwith by
notice in writing to the buyer:
I) To cancel all orders and contracts or any part thereof remaining
unfulfilled between the seller and the buyer for the delivery of the
goods;
II) Either for its agents or itself to have access to the buyer’s premises
for the protection, removal, realisation and disposal of any goods at any time and from time to time in which the property shall not have
passed from the seller to the buyer in accordance with these conditions
of sale.
13. Prices
I) All goods will be charged at the price ruling at the date of delivery, irrespective of any quotation given prior to that date, or of any price
charged for similar goods previously delivered.
marked ‘returnable’ remain the property of the seller and should be
returned as soon as possible after being emptied. Such packages may
not be loaned, given or sold to any third party.
International Safety Components (ISC) Ltd.
Unit 1, Plot 2,
Llandygai Industrial Estate
Bangor
Gwynedd
LL57 4YH
UNITED KINGDOM
Company Registered in England & Wales
No. 2999156
Sales, Customer Service & Marketing:
T >
F > + 44 (0) 1248 363 118
Scan the Quick Response icon with your Smartphone, or visit
e-mails from time to time to inform you of product launches, updates to existing products and other news that’s relevant to your selected industry.
scan
Get launch updates
By e-mail
Contact Us At ISC our aim is to provide the very best customer service. In order to provide the best possible service,
orders.
company purchasing the goods, “the goods” means the goods
between the seller and the buyer.
Solutions in Metal
51
Stay up to date with ISC e-Mail Alerts!
relevant to
your chosen industry.
Solutions in Metal