IPF™ FLOODLIGHT - Cascade Lighting › files › products › 110315103436.pdfTamper-resistant,...
Transcript of IPF™ FLOODLIGHT - Cascade Lighting › files › products › 110315103436.pdfTamper-resistant,...
![Page 1: IPF™ FLOODLIGHT - Cascade Lighting › files › products › 110315103436.pdfTamper-resistant, stainless steel hardware. Finish Natural (NAT): Copper and bronze components are sand](https://reader035.fdocuments.net/reader035/viewer/2022070818/5f170dadd4372b60dc72d9a8/html5/thumbnails/1.jpg)
Minimum Rated Life (hrs.)70% of initial lumens (L70)
50,000
50,000
50,000
50,000
50,000
50,000
L70 DATABK No.
CCT (Typ.)
CRI (Ra. Typ.)
Color Consistency Input Watts (Typ.)
x21 2700K >80 ±40K 15
x22 3000K >80 ±50K 15
x23 4000K >80 ±70K 15
x24 2700K >80 ±40K 25
x25 3000K >80 ±50K 25
x26 4000K >80 ±70K 25
Example: IPF - LED - x22 - FL - NAT - 9 - 11 - CLR
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
IPF LED
IPF™ FLOODLIGHTpowered by
Beam Type Angle
Spot 20°
Flood 40°
Wide Flood 60°
OPTICAL DATALM79 DATA
SUBMITTAL DATE
4-22-13DRAWING NUMBER
SUB-2030-0040429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900 www.tekaillumination.com • [email protected]
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 3/8" Dia.(86mm)
5 3/8" Dia.(137mm)
5 1/2"(140mm)
3 1/4"(83mm)
8 1/8"(206mm)
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 1/4"(83mm)
8 1/8"(206mm)
Series IPF - IPF™ Floodlight
Source LED - ‘X’ Module with Cold Phosphor Technology
LED Type x21 - 15WLED/2700K x24 - 25WLED/2700K x22 - 15WLED/3000K x25 - 25WLED/3000K x23 - 15WLED/4000K x26 - 25WLED/4000K
Optics SP - Spot (20°) FL - Flood (40°) WFL - Wide Flood (60°)
Finish NAT - Natural BP - Brown Patina* NIC - Nickel Plate* BZW - Bronze Wrinkle Powder Coat (See Powder Coat Finish Chart for Available Choices.) *Stainless Steel Rings are provided in Natural (NAT) regardless of finish choice.
Lens Type 9 - Clear (Standard) 10 - Spread Lens 12 - Soft Focus Lens 13 - Rectilinear Lens
Shielding 11 - Honeycomb Baffle
Option CLR - Clear Coat Protection (For use with Natural (NAT) Finishes)
Standard Finish
Powder Coat Color Satin Wrinkle
Bronze BZP BZW
Black BLP BLW
White (Gloss) WHP WHW
Aluminum SAP —
Verde — VER
Premium Finish
ABP Antique Brass Powder HUG Hunter Green
AMG Aleutian Mountain Granite MDS Mojave Desert Sandstone
AQW Antique White NBP Natural Brass Powder
BCM Black Chrome OCP Old Copper
BGE Beige RMG Rocky Mountain Granite
BPP Brown Patina Powder SDS Sonoran Desert Sandstone
CAP Clear Anodized Powder SMG Sierra Mountain Granite
CMG Cascade Mountain Granite TXF Textured Forest
CRI Cracked Ice WCP Weathered Copper
CRM Cream WIR Weathered Iron
Configure Driver Housing SeparatelyDriver Housing Required
INTEGRAL DRIVER HOUSINGS: HP2 - HP2 Housing
REMOTE DRIVER HOUSINGS: HP2RM - HP2 Remote Housing PM2RM - Universal Power Module 2 Remote PM2DRM - Universal Power Module 2 Dual Remote RM - Remote Wall Mount DRM - Dual Remote Wall Mount
![Page 2: IPF™ FLOODLIGHT - Cascade Lighting › files › products › 110315103436.pdfTamper-resistant, stainless steel hardware. Finish Natural (NAT): Copper and bronze components are sand](https://reader035.fdocuments.net/reader035/viewer/2022070818/5f170dadd4372b60dc72d9a8/html5/thumbnails/2.jpg)
Mounting: Remote Driver Housing:
Power Pipe™ Power Canopy™ Tree Strap™ Stems Canopies UPM™ HP2RM UPMRM™RM
Mounting:
Power Pipe™ Power Canopy™Tree Strap™ Canopies
PM2D & PM2Power Pipe™ HP2RMHP2
PM2DRM & PM2RM RM & DRMTMB
Drivers:
Mounting: Remote Driver Housing:
Power Pipe™ Power Canopy™ Tree Strap™ Stems Canopies UPM™ HP2RM UPMRM™RM
Mounting:
Power Pipe™ Power Canopy™Tree Strap™ Canopies
PM2D & PM2Power Pipe™ HP2RMHP2
PM2DRM & PM2RM RM & DRMTMB
Drivers:
Mounting: Remote Driver Housing:
Power Pipe™ Power Canopy™ Tree Strap™ Stems Canopies UPM™ HP2RM UPMRM™RM
Mounting:
Power Pipe™ Power Canopy™Tree Strap™ Canopies
PM2D & PM2Power Pipe™ HP2RMHP2
PM2DRM & PM2RM RM & DRMTMB
Drivers:
PROJECT:
TYPE:
SIDE VIEW
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 3/8" Dia.(86mm)
5 3/8" Dia.(137mm)
5 1/2"(140mm)
3 1/4"(83mm)
8 1/8"(206mm)
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 1/4"(83mm)
8 1/8"(206mm)
IPF™ FLOODLIGHTpowered by
All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications.
5" Dia 5" Dia
PMC
Accessories (Configure separately) Drivers (Configure separately)
Mounting
HP2RM PM2DRM & PM2RM RM & DRMHP2
SUBMITTAL DATE
4-22-13DRAWING NUMBER
SUB-2030-0040429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900 www.tekaillumination.com • [email protected]
FRONT VIEW
GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
Enduring MetalsConstructed from copper, bronze, and stainless steel. These lifetime materials are inherently corrosion resistant. Factory-applied finishes are also available. Body Hand spun from high purity, solid copper plate. High temperature, silicone ‘O’ Ring provides water tight seal.
KnuckleMade from solid Brass. Lamp head adjustment lock screw. High temperature, silicone ‘O’ Ring provides water-tight seal and compressive resistance to maintain fixture position.
CapHand spun from high purity, solid copper plate. Heavy wall copper hinged bezel with captive source acess screws. Stainless steel ring hinge. Lens alignment lock screws allow for precision adjustment without the redundant opening of the fixture.
LensShock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
StemMachined from heavy wall 7/8” O.D. brass.
BKSSL™Integrated solid state system with ‘X’ technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance.
LM-80 certified. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
Color ManagementCorrected cold phosphor technology delivers near-perfect natural white light. Long term phosphor maintenance over product life. Exact color point conformity exceeds ANSI C78.377 standard. Provides uniform beam with no color variation over angle. Module exceeds 80 CRI (RA>80, R9>16).
InstallationMachined 1/2” NPT adaptor for mounting to suitable enclosure.
Remote DriverFor use with remote LED driver. See remote driver submittal to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring.
OpticsInterchangeable OPTIKIT™ modules permit field changes to optical distribution.
WiringTeflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
HardwareTamper-resistant, stainless steel hardware.
FinishNatural (NAT): Copper and bronze components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally ‘weather’ resulting in a unique patina.
Factory Applied: Hand-crafted metal finishes include natural (NAT), brown patina (BP), and nickel plate (NIC).
Powder Coat: Class ‘A’ TGIC polyester powder coating. RoHS compliant.
Clear Coat ProtectionOptional ceramic clear coating seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) finishes.
Warranty5 year limited warranty.
Certification and Listing ITL tested to IESNA LM-79. Lighting Facts Registration per USDOE (www.lightingfacts.com). ETL Listed to ANSI/UL Standards 1598, 8750 and Certified to CAN/CSA Standard C22.2 No. 250. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Additionally suitable for installation within 4’ of the ground. IP66 Rated. Made in USA.
®Teflon is a registered trademark of DuPont Corporation.®Energy Star is a registered trademark of the United States Environmental Protection Agency.
SPECIFICATIONS
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 3/8" Dia.(86mm)
5 3/8" Dia.(137mm)
5 1/2"(140mm)
3 1/4"(83mm)
8 1/8"(206mm)
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 1/4"(83mm)
8 1/8"(206mm)
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 3/8" Dia.(86mm)
5 3/8" Dia.(137mm)
5 1/2"(140mm)
3 1/4"(83mm)
8 1/8"(206mm)
3 1/8"(79mm)
5 1/4"(133mm)
7/8" Dia.(22mm)
3 1/4"(83mm)
8 1/8"(206mm)