IO 010-05A Stator Replacement

download IO 010-05A Stator Replacement

of 9

Transcript of IO 010-05A Stator Replacement

  • 8/6/2019 IO 010-05A Stator Replacement

    1/9

    1

    Operating Instructions

    INSTRUCTIONS FOR COMPRESSOR

    DISMANTLING AND STATOR REPLACING

    Officine Mario Dorin S.p.A.;

    Via Aretina 388,

    50061 Compiobbi Firenze Italia

    Phone 0039 055 623211Fax 0039 62321380

    www.dorin.com

    IO 010-05A

    http://www.dorin.com/http://www.dorin.com/
  • 8/6/2019 IO 010-05A Stator Replacement

    2/9

    2

    Operating Instructions

    In order to dismantle a compressor please follow the below action list action list and refer to the compressorsexploded views that follow in next pages.

    Kindly take note that these operation have to be done from qualified personnel only and that Dorin will notbe responsible in any case for any damage to things or human beings arising from an uncorrect workperformed on compressors.

    H1 H2 H32 K4 K4P K5 Y6 Y7

    1 loosen oil drain plug 4 4 4 13 15 1CKP005 17 20

    2 remove head(s) 24 24 20 6 5 1CCS047 8 9

    3 remove valve plate(s) 21 21 18 24 22 1PCB045 29 32

    4 remove discharge manifold no no no 14 26 1CKG035 15 185 remove oil pump no no no no 16 1LGA021 20 23

    6 remove cilynder cover 1 1 1 8 9 no no no

    7 remove oil centrifugation disk 7 7 11 23 no no no no

    8 remove motor cover 6 6 7 9 12 1CKM055 16 19

    9 loosen rotor screw

    10 remove rotor

    11 remove crankcase bottom plate no no no no no

    12 remove lower shell connecting rod no no no no yes yes yes yes13 push the piston out from the head no no no no yes yes yes yes

    14 disassembly piston wrist pin no no no no yes yes yes yes

    15 lock the piston out from the head with a thorn no no no no yes yes yes yes

    16 remove shaft following the connecting rod line 17 17 12 22 21 1MKA051 28 31

    17 remove the stator according to the following instructions

    INSTRUCTION FOR COMPRESSOR DISMANTLING AND STATOR REPLACEMENT

    action

    numberaction description

    compressor range / item description

    the screw is identifiable in the electric motor assembly

    the rotor is identifiable in the electric motor assembly

    need to elevate or rotate the compressor

  • 8/6/2019 IO 010-05A Stator Replacement

    3/9

  • 8/6/2019 IO 010-05A Stator Replacement

    4/9

    4

    Operating Instructions

  • 8/6/2019 IO 010-05A Stator Replacement

    5/9

    5

    Operating Instructions

  • 8/6/2019 IO 010-05A Stator Replacement

    6/9

    6

    Operating Instructions

  • 8/6/2019 IO 010-05A Stator Replacement

    7/9

    7

    Operating Instructions

  • 8/6/2019 IO 010-05A Stator Replacement

    8/9

    8

    Operating Instructions

    12 3

    O ti I t ti

  • 8/6/2019 IO 010-05A Stator Replacement

    9/9

    9

    Operating Instructions

    Press needed to extraxct the stator