Introducing the New PENSOTTI REP EJL Sales · energy. This increases efficiency while reducing...
Transcript of Introducing the New PENSOTTI REP EJL Sales · energy. This increases efficiency while reducing...
Introducing the New PENSOTTI REP “EJL Sales”
For a quote just give a call or fax -- Edward J. Locklin -- www.EJLsales.com Ph (631) 676-5901; Fax (631) 676-5903
High Efficiency ASME boiler
Fully Condensing
Natural or Propane Gas Fired
Low NOx Operation
Heat and Combination Units
Conden
sing G
as B
oiler
sSolenne Series
www.pensottiboiler.comA Company
Pensotti LLC34 Coffin AvePO Box 3358 Brewer, ME 04412 Tel: (207) 942-3636 Fax: (207) 942-3737 www.pensottiboiler.com
Solenne Series
PCH 18B-H PCH 34B-H PCH 50B-H PCC 34-H PCI 18/8-H PCI 34/20-HPerformance Data
Rated Input min-max (MBH) 16-80 34-116 41-171 34-116 16-80 34-116
DOE Heating Capacity (MBH) 73 106 156 106 73 106
Net AHRI (MBH) 62 90 140 90 62 90
Efficiency - A.F.U.E.%* 91% 91% 91.2% 91% 91% 91%
Heat Temperature Range 86-185 °F
Dimensions Weight (lbs.) 80 88 114 88 114 146
Height (in.) 28.7 28.7 27.6 28.7 31.1 35.5
Width (in.) 16.1 16.1 19.3 16.1 17.7 19.5
Depth (in.) 11.2 12.2 18.5 12.2 13 18.9
Domestic Hot Water DataDHW Flow Rate 63 °F Rise (GPM) - - - 3.77 3.1 4.5
DHW Storage (US Gals.) - - - - 2.11 5.30
DHW Temperature Range 95-160 °F
Venting 2 Pipe Polypropylene Vent Size 2” (60 mm)
Concentric vent size 3.15”/5” (80/120 mm)
Benefits
• High efficiency, Low NOx operation• Fully modulating with a 5:1 turndown• Compact zero clearance to combustible design • Clean, appliance quality, service friendly, metal cabinet• Reliable, stainless steel, ASME primary heat exchanger• Propane or Natural Gas Fired• Whisper quite operation• Simple installation with supplied pipe fittings and isolation valve• Flexible venting options• Self diagnostic control with Freeze Protection, Pump Exercise, Outdoor Temperature Reset and more
*Tested at ETL laboratory with environmental conditions of 65-71°F ambient temperature with relative humidities of 50-60%.
MA Plumbing Board Approved
Stainless Steel ASME Primary Heat Exchanger
Brush-less DC Motor
Micro Storage Tank(PCI Only)
Direct Spark Ignition
Intuitive Self-Diagnostic Control System
Primary Circulator Pump & Relief Valve
Expansion Tank
Negative Pressure Gas Valve
The Solenne’s intuitive control system with digital display, provides simple
heat and hot water temperature adjustments.
Pensotti LLC • 34 Coffin Ave, PO Box 3358, Brewer, ME 04412 • 207-942-3636 • www.pensottiboiler.com Pensotti LLC • 34 Coffin Ave, PO Box 3358, Brewer, ME 04412 • 207-942-3636 • www.pensottiboiler.com
Solenne Series Solenne SeriesValuePensotti’s condensing boiler is a fully packaged, wall mounted heating and hot water solution with an intuitive control system. Built in features including a Primary Circulator, Expansion Tank, Relief Valve, Self-Diagnostic Control and more, along with a Limited Lifetime Primary Heat Exchanger warranty all packaged in an appliance quality cabinet, ensure that the Solenne series boiler is a valuable solution what will provide years of dependability.
America’s Best Heating ValueThe Solenne line of wall mounted gas-fired boilers combines the efficiency requirements necessary in today’s economic environment and partnersflawlessly with advanced hydronic-heating technology. The Pensotti Solenne Series is offered as a competitive package which effortlessly blends value and performance.
Efficiency of the EnergyThe Pensotti gas condensing boiler maximizes the efficiency of your heating system by utilizing numerous energy saving operations. The Solenne boiler reduces the amount of energy which commonly escapes through the chimney in traditional systems by extracting all heat possible from the combustion process. The Solenne boiler allows for full modulation of the burner flame based upon circulating water temperatures, which helps decrease the amount of fuel expended while increasing efficiency and longevity of the system components.
Further increases in efficiency can be achieved by utilizing the included outdoor reset control. This control allows the boiler to monitor outdoor temperatures and adjust the boiler temperature accordingly. As temperatures outside decrease the boiler temperature increases. As outdoor conditions become warmer the boiler temperature will decrease. This feature creates a more comfortable environment inside the home while optimizing fuel consumption.
VersatilityThe Pensotti Solenne series consists of six different models with three different maximum heating capacities ranging from 80 to 174 MBH. Heating only, Combination Heat and Hot Water, and Combination with Micro Hot Water Storage models make the Solenne series the most versatile line available today.
Pensotti Solenne boiler can be fired with either propane or natural gas using a simple conversion process. Flexible venting options of either Concentric or Twin Pipe Polypropylene venting allow the Solenne series to be customized to fit installation requirements in any home.
PCH FeaturesThe Solenne PCH series are heating only boilers with the option to connect an indirect water heater. Using the supplied pipe connections, pre-wired sensor and the built-in 3 speed circulator, installation of an indirect requires fewer components, reducing installation costs.
PCC FeaturesIf instantaneous hot water is what you desire then the Solenne PCC series is the boiler for the job. The boiler produces domestic hot water via the integrated stainless steel and copper brazed plate heat exchanger. Responding instantly upon a demand, the boiler will prioritize all domestic hot water needs. Combining heat and domestic water into one compact appliance dramatically reduces the installation space that is typically required with traditional systems.
PCI FeaturesPensotti’s PCI series combines the efficiency of an instantaneous water heater with the benefits of an indirect water heater. The PCI boiler is unique to anything on the market today. With its patented Duopass® system, consisting of a brazed plate heat exchanger and integrated micro storage water heater the PCI boiler provides abundant domestic hot water. Upon a demand for hot water the PCI boiler responds by instantly re-heating domestic water held within the storage tank and pre-heating the entering cold water via the brazed plate heat exchanger. It is due to this process that the PCI series boiler has dramatically increased recovery rates as compared to any standard combi-boiler.
Pensotti PCC Series Combination Heat and
Instantaneous Hot Water Boiler
Condensing of the flue gases is the process of extracting all possible latent heat out
of those gases and converting it into heat energy. This increases efficiency while
reducing emissions into the environment.The PCI series Duopass® system can provide abundant hot water with increased
recovery over traditional combi-boilers.
With the Pensotti’s fully packaged de-sign setup is quicker and easier,
reducing installation costs.
Space Saving DesignQuiet, Comfortable HeatingEfficient Heat TransferScratch, Dent and Corrosion ResistantIndividual Room Temperature ControlAvailable in a Variety of Heights and Widths10 Year Warranty
Dis
tinct
ive
Hot
Wat
er P
anel
Rad
iato
rs
Panel Radiators
www.pensottiboiler.comA Company
Pensotti LLC34 Coffin AvePO Box 3358 Brewer, ME 04412 Tel: (207) 942-3636 Fax: (207) 942-3737 www.pensottiboiler.com
Panel RadiatorsPensotti Panel Radiators combine the comfort of radiant heat with an elegant contemporary design. These attractive radiators have been providing unsurpassed comfort and efficiency in European homes for more than 40 years. Because they are extremely versatile they can be used as a primary heating system, a supplement to a radiant floor system, or in conjunction with traditional heating sources.
Virtually silent in operation, Pensotti Panel Radiators eliminate the noises associated with other types of heating systems. Unlike conventional baseboard which provides only convective heat, panel radiators emit both radiant and convective heat to produce a blanket of unequaled warmth.
Wall mounted and uniquely designed, Pensotti Panel Radiators are durable, easy to clean and reduce the areas where household dirt and dust might collect. Requiring just one quarter the amount of wall space when compared to conventional baseboard, more flexibility is allowed in room design and furniture placement.
An integral thermostatic valve with flow setter is standard on each radiator. Combined with an optional non-electric operator, automatic room by room temperature control is achieved, resulting in additional comfort and energy efficiency.
Pensotti Panel Radiators are quick and easy to install with the supplied snap-in mounting brackets, bottom pipe connections and reversible mounting.
MODEL HEIGHT (IN) WIDTH (IN) BTU OUTPUT* BASEBOARD EQUIVALENT** WEIGHT (LBS)
DD12.16DBL 4’ 16.5
DD12.24DBL 12
12
24
16
3182
2350
5.5’ 24
137.6’7583 23 21 LBD23.21DD
DD12.40DBL 12 40 4822 8.3’ 39
64 10’ 4875 84 21 LBD84.21DD
DD12.56DBL 12 56 6751 11.6’ 52.5
0614.6’ 7848 46 21 LBD46.21DD
DD20.16DBL 20 16 2864 4.9’ 28
43 6.2’ 0583 02 20 LBD02.02DD
DD20.24DBL 20 24 4296 7.4’ 40
64 8.6’ 2105 82 20 LBD82.02DD
DD20.32DBL 20 32 5728 9.9’ 53
DD20.36DBL
DD20.40DBL 20
20
40
36
7162
6445
12.3’
11.1’
64
57.5
1713.6’ 8787 44 20 LBD44.02DD
DD20.48DBL 20 48 8594 14.8’ 76
135.7’ 5923 61 24 LBD61.42DD
DD24.20DBL 24 20 4120 7.1’ 40
848.5’ 4494 42 24 LBD42.42DD
DD24.28DBL 24 28 5767 9.9’ 56
6611.4’ 1956 23 LBD23.42DD
DD24.36DBL 24
24
36 7416 12.8’ 74.5
DD24.40DBL
DD24.44DBL 24
24
44
40
9063
8240
15.6’
14.2’
89
80.5
79 17’ 7889 84 LBD84.42DD
DD24.56DBL 24
24
56 11536 19.9’ 113.5
DD24.64DBL
DD24.72DBL 24
24
72
64
14832
13183 22.7’
25.6’ 149
130
847.7’ 1844 61 LBD61.63DD
DD36.20DBL 36
36
20 5602 9.6’ 56
2711.6’ 2276 42 LBD42.63DD
DD36.32DBL 36
36
32 8963 15.5’ 88
* Based on an average water temperature of 176 degrees and a room temperature of 68 degrees **Based on 580 Btus per linear foot
Installation Requirements• Installation in closed-loop hot water systems only• Maximum operating temperature –250 degrees• Maximum operating pressure –145 psi• Not for use in steam systems• Radiator can be turned 180 degrees to allow for
either left or right hand pipe connections
Four different radiator valves are available to make system design, installation and mainte-nance quick and easy
Pensotti Snap-Grip mounting brackets make radiator installation and removal a snap
0.50 - 0.95 0.75 - 1.65 1.45 - 2.95 2.55 - 5.75 3.50 - 6.40 0.50 - 0.95 0.75 - 1.65
70-133 105-231 203-413 357-805 490-896 70-133 105-231
20-39 30-67 59-121 104-236 143-263 20-39 30-67
No heavier than Number 210ptional pump required for kerosene)
120v 60Hz 3250 rpm
4.3 amp
Model F3 F5 Fl0 F15 F20 BF3 BF5
8112"(215mml 93/16"(233mml 10.,6" (262mml 11314"(298mml 113/4"(298mm) 913/16"(249mm) 913/16"(249mm)~
: 9'~J6"(252mml 10"/16" (272mm) 12" (305mm) 133/4"(350mm) 133/'" (350mm) 11114"(286mm) 11 In"(292mml
6,n" 1164mm) 7'/1'- (180mm) 8'/16"(204mm) 9'/16"(230mml 9'/16"(230mm) 7 lIT 1193mm) 7'IT (193mml
I 3,n" (89mm) 3,n" (89mm) 4,re" (105mm) 4"/J6"(119mm) 4"/16" (119mm) 3,n" (89mm) 3,n" (89mm)
rVSBT 5,n" (140mml 5,n" (140mm) N/A N/A N/A 5,n" (140mm) 5,n" (140mm)
SBT 8" (203mm) 8" (203mml T(178mm) T(178mm) T(178mm) 8" (203mm) 8" (203mm)-LBT 12" (305mml 12" (305mm) 12" (305mm) 12" (305mm) 12" (305mm) 12" (305mm) 12" (305mm)
OEMICu"oml Other combustion head lengths available on request
JlI (7114" (184mml 7'3/16"(199mm) 811/J6"(221mm) 10" (254mm) 10" (254mm) 6,re" (175mm) 7'/16"(189mm)
Models F3, F5, F10, F15 and F20
FIRING RATES
Reference Conditions
Ambient temperature. 66"F(2crC)Barometric pressure: 394"w.c.Altitude: 329 ft. a.s.l.
40-Series oil burners are UL and CSA approved. ® @.