Genetec Synergis Access Control System and ASSA ABLOY IP-enabled locks combine advanced security with convenience and flexibility to provide powerful access control solutionsWhether you need to secure a large, multi-site facility, or a smaller installation with a few doors, Synergis has the flexibility needed to adapt to your security environment.

• As a powerful single site solution able to extend to multi-site management, Synergis can be deployed to meet your access control over any network environment.

• Whether you are installing a new security system or replacing an existing one, Synergis streamlines the entire process. Edge devices can be quickly discovered on your network and enrolled, saving you valuable time during system deployment.

• Synergis provides efficient workflows and greater automation through its unified interface, ensuring that more time can be spent monitoring critical tasks, rather than administrating software.

InternalBuildingNetwork

EAC Server

Wireless Network Device

Power over Ethernetswitch(120VAC)

Network cable through raceway

InternalBuildingNetwork

McKinney PoE-compatible Ethernet Hinge

EAC Server

Typical PoE System Configuration

Typical WiFi System Configuration

Synergis Access Control Solution Synergis Access Control Solution

Intelligent IP-Enabled Access Control Solutions

Brought to you by ASSA ABLOY Group brands: CORBIN RUSSWIN | SARGENT

ASSA ABLOY Americas110 Sargent Drive New Haven, CT 06511 intelligentopenings.comCopyright © 2014, ASSA ABLOY Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Intelligent IP-Enabled Access Control Solutions

ASSA ABLOY IP-enabled

access control solutions

take advantage of a facility’s

current or planned network

infrastructure (whether it’s

wired or wireless) to provide

advanced security and

easier, more cost-effective

installations. Easily managed

by industry leading access

control systems, our IP-enabled

solutions ensure reliable

communication, advanced

management capabilities, and

real-time alarm notification.

Features• Real-time door status monitoring

• Real-time, configurable alarm notification

• Local decision making

• Available in mortise lock, cylindrical lock, and exit device configurations for compatibility with a variety of openings

• Built on proven ANSI/BHMA Grade 1 lock platforms from ASSA ABLOY Group brands CORBIN RUSSWIN and SARGENT

• Broad range of finishes and decorative levers

• 2,400 users supported; 10,000 event transaction history

PoE• Utilizes IEEE 802.3af (Class 2) PoE enabled

network infrastructure for both power and data

• Provides same real-time communication as traditional access control

• Energy efficiency with a maximum power consumption of 7 watts per lock — 50% less than traditional access control installations using PoE

WiFi• Enables access control in locations where

it would be difficult or cost-prohibitive to install a wired lock

• Utilizes 802.11b/g/n wireless communication

• Scheduled and user-initiated updates eliminate manual programming

• Advanced data security with standard encryption techniques

Effective 4/1/2014 2500-1746L2

Proximity only

iCLASS® only

multiCLASS SE™ KeypadMagnetic

stripeNFC-enabled

mobile phones

CORBIN RUSSWIN IN120

SARGENT IN120

CORBIN RUSSWIN Access 700® PIP1 & PWI1

SARGENT Passport 1000 P1 & P2

CORBIN RUSSWIN Access 800® IP1 & WI1

SARGENT Profile Series v.S1 & v.S2

2280 Alfred-Nobel Blvd. Suite 400 Montreal, Quebec, Canada H4S 2A4