Installation - Verizon Fios & Custom TV | Internet, Cable … Name: eONT Guide Manual Studio Artist:...

Cyan Magenta Yellow Black PMS 1795 C PMS Cool Gray

11 C Die Cut

LH: In ProgressSave Date: 10-31-2013 1:26 PMPrevious User: Rafaniello, Tammy (NYC-MR)Document Path: Macintosh HD:Users:bob.mantz:Desktop:13070_CCF_9849_eONT_Guide.indd

Job #: CCF13070-9849Client: VerizonJob Name: eONT Guide Manual

Studio Artist: B. MantzProof #: 7_release

SELF-INSTALLATION GUIDE

Installation begins here.

In just a few simple steps, you’ll be ready to experience all the benefi ts of life on FiOS®.

1. Install your router. You’ll fi nd installation instructions on page 2.

2. Choose a wired or wireless Internet setup option. See page 4 for instructions.

3. Activate service. Visit activatemyfi os.verizon.net.

4. Set up your FiOS TV service. Use the Setup Web Site or follow the instructions starting on page 7.

5. Set up your FiOS Phone service. Go to page 16 for instructions.

CCF13070 eONT Self-Install Guide (Bottom)

T:13 inT:5.0625 in

B:13.25 inB

:5.3125 in

13070_CCF_9849_eONT_Guide.indd 113070_CCF_9849_eONT_Guide.indd 1 10/31/13 1:28 PM10/31/13 1:28 PM


11 C Die Cut




CCF13070 eONT Self-Install Guide (Top)

FiOS™ Router Setup

COAX CABLEIN EQUIPMENT BOX

ETHERNET CABLE (6')IN ROUTER BOX

CABLE BARREL CONNECTOR IN EQUIPMENT BOX Optional if wall outlet not available.

POWER CORDIN ROUTER BOX

2-WAY SPLITTERIN EQUIPMENT BOX Optional if installing TV and router in same room.

FiOS ROUTER

To set up your router, here’s what you may need:

The amazing power of Verizon

FiOS all starts with the router.

To get started:

1. Find the box labeled “Your Equipment.”

2. Underneath that you’ll fi nd your Set Top Boxes.

3. Find another box labeled “Wireless Broadband Router.”

2

T:13 inT:5.0625 in

B:13.25 inB

:5.3125 in



11 C Die Cut





Plug the power cord into the port on the back of the router; then into a power outlet.

2

COAX CABLE

Router installation required for both FiOS TV and Internet service.

Connect one end of the coax cable to the red coax port on the back of the router. Connect the other end to a coax wall outlet.

1 Turn the FiOS Router ON. Make sure the three lights are GREEN. 3

FiOS Router (Back)

Coax Wall Outlet

FiOS Router Setup

CABLE BARREL CONNECTOROPTIONAL IF WALL OUTLETIS NOT AVAILABLE.

Power Light

SOLID GREENCoax WAN Light

SOLID GREENLAN Ethernet Lights

SOLID or FLASHING GREEN

FiOS Router Setup

Next, if installing FiOS Internet and TV, go to page 4. If installing FiOS TV only, go to page 7.4 3

T:13 inT:5.375 in

B:13.25 inB

:5.625 in



11 C Die Cut





FiOS Router

Ethernet Port

1

3Coax Wall Outlet

ETHERNET CABLE (6')

Laptop Computer

2

FiOS® Internet Setup Wired setup

NOTE: If a TV will be connected in the same room as your router, you will need a splitter, shown below. Connect splitter IN port to the coax wall outlet. Then connect a splitter OUT port to the red coax port on router. The remaining OUT port will connect to the Set Top Box.

2-WAY SPLITTER

Coax Cable to Set Top Box

Coax Cable to FiOS Router

CONFIGURING WIRED INTERNET

1. Plug the Ethernet cable into any one of the four yellow Ethernet ports on the back of the FiOS Router. An Ethernet port looks like a large telephone jack.

2. Make sure the computer is turned on, then plug the other end of the cable into an Ethernet port on the computer.

3. Make sure at least one of the LAN Ethernet lights is either SOLID or FLASHING GREEN. This may take a few minutes.

ETHERNET CABLE 4

T:13 in

T:5.375 in

B:13.25 in

B:5.625 in



11 C Die Cut





CONFIGURING WIRELESS DEVICES

1. On the FiOS Router, you will see a label that lists the router’s preset codes.Network Password/Key (WPA2 or WEP): ________________________________________ Wireless Network Name (ESSID): __________________________________________________

2. Launch your device’s wireless application. Select Network Name (ESSID) and then Connect.

3. When you are prompted to enter a Network Password/Key, enter the WPA2 or WEP EXACTLY as it appears on your router’s label (case sensitive). Then select Connect.

FiOS Internet SetupWireless setup

1

FiOS Router (Front)

5

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





INTERNET ACTIVATION STEPS

1. Open an Internet browser from your computer or tablet. If you are not automatically redirected, go to activatemyfios.verizon.net.

2. Follow the Setup Web Site to activate your Verizon account.

3. Activate Internet service (if ordered).

4. Follow the Setup Web Site to activate your FiOS TV equipment.

FiOS ROUTER

FiOS Internet Setup

6

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





SET TOP BOX HD DVR (MODELS VARY)

SET TOP BOX SD/HD (MODELS VARY)

FiOS® TV Service Setup

DIGITALADAPTER IF SPECIAL-ORDERED

CableCARD IF SPECIAL-ORDERED

COMPONENT CABLE IN EQUIPMENT BOX

COAX CABLE IN EQUIPMENT BOX

Here’s what you may need for installation:

POWER CORD

FiOS TV Setup

Two ways to install yourVerizon FiOS TV. If installing FiOS TV and Internet, continue using the

Setup Web Site at activatemyfi os.verizon.net.

If installing FiOS TV ONLY, use this guide.

FiOS TV REMOTE

7

T:13 inT:5.375 in

B:13.25 inB

:5.625 in



11 C Die Cut




HD TV plug connectionsHDHD TVTV lplug conn tectiions


1

2

4

3

FiOS TV Service Setup HD TV installation instructions

1. Plug one end of the coax cable into the wall outlet, then the other end into RF IN or FiOS TV IN on your Set Top Box.

2. Connect the 3 black video plugs on the component cable to the jacks of the same color on the Set Top Box (Video OUT) and then on the TV (Video IN).

3. Plug the 2 white audio connections into the jacks on the Set Top Box (Audio OUT) and then on the TV (Audio IN). Connect both the right and left sides.

4. Connect the Set Top Box’s power cord and plug it into the wall.

5. Activation starts immediately.

COAX CABLE

COMPONENT CABLE2 White Plugs = Audio3 Black Plugs = Video

POWER CORD

HD Set Top Box plug connectionsCoax Wall Outlet

8

T:13 in

T:5.375 in

B:13.25 in

B:5.625 in



11 C Die Cut





Verizon FiOS Set Top Box Activation

Welcome to Verizon FiOS TV.

Please wait while the Set Top Box performs automatic activation process.

Activation in Progress . . . .

Note: Set Top Box will reboot during the process.

FiOS TV REMOTE

ACTIVATION STEPS

1. Activation starts automatically when you plug the power cord of your Set Top Box into the wall. It may take up to 15 minutes to complete.

2. Is your TV on? If not, turn it on now and tune to the correct input. Use your TV remote (not FiOS remote) and select Input until you see the activation screens.

3. Your Set Top Box will automatically turn off and on during this process.

4. Follow the instructions on the screen. If asked to choose HD or SD, choose HD.

5. Once you see a live TV picture, your Set Top Box is activated!

SIMPLE TROUBLESHOOTING TIPS

• Did you order more than 10 business days ago? If so, you must use manual activation on page 18.

• If you do not see activity on your TV screen for 15 minutes, then unplug the Set Top Box. Wait 15 seconds. Plug back in and repeat activation steps.

• If you’ve tried Automatic Activation three times and it does not complete, see page 18 for Manual Activation.

You will see multiple on-screen images like these during Automatic Activation.

A B

FiOS TV Service Setup Activation of HD Set Top Box

9

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut




Standard-Defi nition TV plug connection

COAX CABLE NOTE: YOU MAY NEED A SECOND CABLE, NOT SUPPLIED.

POWER CORD

1. Plug one end of the coax cable into the wall outlet, then the other end into RF IN on your Set Top Box.

2. Connect one end of the second coax cable to the Set Top Box’s TV/VCR output and the other end to the TV’s Antenna, Cable or A/V input.

3. Connect the Set Top Box’s power cord and plug it into the wall. Activation starts immediately.

2

3


1

FiOS TV Service Setup Standard-Defi nition TV or Set Top Box Model #QIP2500installation instructions

10

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





Verizon FiOS Set Top Box Activation

Welcome to Verizon FiOS TV.

Please wait while the Set Top Box performs automatic activation process.

Activation in Progress . . . .

Note: Set Top Box will reboot during the process.

FiOS TV REMOTE

A B

ACTIVATION STEPS

1. Activation starts automatically when you plug the power cord of your Set Top Box into the wall. It may take up to 15 minutes to complete.

2. Is your TV on? If not, turn it on now and tune to the correct input. Use your TV remote (not FiOS remote) and select Input until you see the activation screens.

3. View the progress on your TV screen. Your Set Top Box will automatically turn off and on during this process.

4. Follow the instructions on the screen. If asked to choose HD or SD, choose SD.

5. Once you see a live TV picture, your Set Top Box is activated!

SIMPLE TROUBLESHOOTING TIPS

• Did you order more than 10 business days ago? If so, you must use manual activation on page 18.

• If you do not see activity on your TV screen for 15 minutes, then unplug the Set Top Box. Wait 15 seconds. Plug back in and repeat activation steps.

• If you’ve tried Automatic Activation three times and it does not complete, see page 18 for Manual Activation.

FiOS TV Service Setup Activation of SD Set Top Box

You will see multiple on-screen images like these during Automatic Activation.

11

T:13 inT:5.0625 in

B:13.25 inB

:5.3125 in



11 C Die Cut





1. Connect the coax cable from the coax wall outlet to the RF IN or FiOS TV IN input on the back of the Digital Adapter.

2. Connect the second coax cable to the TV/VCR output on the back of the Digital Adapter. Connect to the antenna, cable or A/V input on the back of the TV.

3. Plug one end of the Digital Adapter power cord into the Digital Adapter, then the other end into a power outlet.

4. If activating more than one Digital Adapter, plug in all the Digital Adapters prior to activation.

1

3

Digital Adapter

COAX CABLE

POWER CORD

FiOS TV Service SetupConnecting your Digital Adapter

Standard-Defi nition TV

Coax Wall Outlet

2 12

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





ACTIVATION STEPS

1. Turn on the Digital Adapter by pressing the Set Top Box button on the FiOS TV Remote Control. When working, the Digital Adapter yellow ON light is illuminated.

2. Turn your TV on and tune to Channel 3, either manually or with the remote control that came with your TV.

3. To complete activation, call the Verizon Support Center at 1.855.372.2181 and provide the Digital Adapter serial numbers.

4. Once activation is done, the Digital Adapter will turn itself off. Turn on the Digital Adapter using your FiOS TV Remote Control.

NOTE: The Digital Adapter provides FiOS TV access without the interactive features, like Video On Demand or the full Media Guide, that a regular Set Top Box provides.

Digital Adapter (Front)

Digital Adapter (Back)

FiOS TV Service SetupActivating your Digital Adapter

For support, visit fi oshelp.verizon.com or call 1.855.372.2181.

FiOS TV REMOTE

13

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut




CableCARD


1. Read through the instructions for your CableCARD-ready device and complete any setup.

2. If you’re connecting to a DVR:• Follow steps A and B below.• Slide the CableCARD into your recorder and proceed to step 4 on the next page.

3. If you’re connecting directly to a CableCARD-ready TV: • Connect the coax cable from the TV to a coax wall outlet.• Slide the CableCARD into your TV and proceed to step 4 on the next page.

Connect the coax cable from the coax wall outlet to the RF IN or FiOS TV IN input on the back of the Digital Video Recorder.

2AConnect the audio (white) and video (black) component cables to the matching ports on the back of your Set Top Box and your TV.

2B

3

NOTE: With a TV that’s CableCARD-ready, you can put the CableCARD directly into a slot in the back.

Personal Video Recorder

FiOS TV Service SetupInstalling your CableCARD

Standard-Defi nition TV

Coax Wall Outlet

14

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





4. Follow the setup instructions on-screen.

When the CableCARD is inserted, you will see a pairing screen with information (see image to the right). Follow the on-screen instructions. If you don’t see the pairing screen on your TV, make sure the TV is on the correct input setting (refer to your TV instructions for help).

5. Write down the information shown on your TV.

Please write down the information shown on your TV screen for each CableCARD. You will be asked to provide these numbers during activation.

6. Locate your activation code in the Customer Receipt.

If you ordered multiple CableCARDs, you’ll receive multiple letters with one letter for each CableCARD.

CableCARD activation code(s): ______________________________________________________

Your ZIP Code: ___________________

7. Select which method of activation you prefer. Follow the prompts.a. Visit verizon.com/fiostv/selfinstall. b. By phone at 1.888.897.7499.c. Use the In-Home Agent desktop solutions

tool, which can be downloaded at verizon.com/inhomeagent.

Pairing Screen Information Format Your Device Information (see pairing screen above)

CableCARD ID: 13 digits _______________-_______________-______________-_______________-_______

Host ID: 13 digits _______________-_______________-______________-_______________-_______

Data ID: 11 digits _______________-______________-_______________-_______

Pairing Screen Equipment Activation Code

FiOS TV Service SetupActivating your CableCARD

15

T:13 inT:5.0625 in

B:13.25 inB

:5.3125 in



11 C Die Cut





Phone service should already be available in your home. If using a corded telephone, plug the line cord from your phone into any telephone jack. You should receive a dial tone and be able to make calls.

If using a cordless phone, make sure that the base station is powered and the handset is fully charged.

FiOS® Digital Voice requires the use of 10-digit dialing for local calls. It’s simply the area code and a seven-digit telephone number. If you have a home security system, contact your provider to make sure your alarm system is programmed for 10-digit phone notification.

To set up Voice Mail, call 1.888.2FiOSVM (1.888.234.6786) and follow the prompts.

Connect the power cord from the wall outlet to the back of the phone’s base unit.1

Plug one end of the phone line into the phone jack, then the other end into the phone base.

2

If you do not receive a dial tone, make sure that you have reached your Service Ready Date.

For more FiOS Digital Voice support, visit verizon.com/fi osvoice.

PHONE LINE

POWER CORD

Your Home Phone

Phone Service SetupConnecting telephones to wall jacks

16

T:13 in

T:5.0625 in

B:13.25 in

B:5.3125 in



11 C Die Cut





To troubleshoot or learn more about your FiOS service, click on the Internet, TV or Phone icons on your In-Home Agent screen.To troubleshoot or learn more about your FiOS service, click on the Internet, TV or Phone icons on

FAST AND EASY SOLUTIONS TO HELP DIAGNOSE AND SOLVE PROBLEMS

To access TV support tools, use your Set Top Box Remote Control and select “Menu,” then “Customer Support,” then the support topic of choice.

Or download an even more powerful tool at verizon.com/inhomeagent to manage your FiOS services and features including:

• TV — Troubleshoot Set Top Box issues.

• Internet — Add computers to your wireless network, manage e-mail services, optimize network performance or troubleshoot connectivity problems.

• Phone — Retrieve voice mail access number, set up multiple mailboxes or manage customized features.

Verizon In-Home Agent

Phone Service Setup

17

T:13 inT:5.375 in

B:13.25 inB

:5.625 in



11 C Die Cut





Equipment Activation Code

Manual Activation

1. Enter the Equipment Activation Code from your packing slip + your ZIP Code + the quantity of Set Top Boxes.

2. Have more than one Set Top Box? Connect plugs for all Set Top Boxes now. This process will activate all your Set Top Boxes at once.

3. IMPORTANT: Turn on the TV using the button on the TV set.

4. Install batteries in the Verizon Remote Control.

5. Press Set Top Box “Power” on the Verizon Remote Control. Make sure Set Top Box light is ON.

IF YOUR STB DID NOT AUTO-ACTIVATE, ACTIVATE IT MANUALLY.

6. To complete activation, visit verizon.com/fi ostv/selfi nstall or call 1.888.897.7499.

• Set Top Box activation takes 15 minutes.

• Your Set Top Box is activated when it turns itself off.

7. Turn TV back on and select Channel 3 with the FiOS TV Remote.

8. Turn on Set Top Box using the Verizon Remote Control.

18

T:13 in

T:5.375 in

B:13.25 in

B:5.625 in



11 C Die Cut





Still not working? Call 1.800.VERIZON for technical help.

TV PICTURE — No picture or blue screen?

• Check that Set Top Box and TV are turned on.

• Set TV to Channels 3 or 4, if using coax cable.

• With TV’s remote, select the correct input channel.

HOME THEATER OR DVD

• Visit verizon.com/fi ostvwiring to connect DVD players and home theaters.

REMOTE CONTROL

• Read the Remote Control Guide in this box.

• View Help Videos on Channel 131 FiOS TV.

• Visit welcometofi os.verizon.com to program additional devices.

FiOS ROUTER

• Check that router is turned on.

• Check router coax cable connection to the coax wall outlet.

• Confi rm Power, WAN and Internet lights are green. If not, turn router off, then back on. Now unplug the Set Top Box Power Cable for 15 seconds and plug back in.

• If Auto-Activation fails, go to page 18 for manual activation.

Troubleshooting TV

Troubleshooting

FiOS TV REMOTE

FiOS ROUTER

19

T:13 inT:5.375 in

B:13.25 inB

:5.625 in



11 C Die Cut





PHONE SERVICE — TROUBLESHOOTING NO DIAL TONE

• If this is a cordless phone system, please check that the handset is charged. If the handset does not charge, you may need to replace the battery.

• If there is no dial tone, move the telephone to another wall jack in the house. Lift the receiver and listen for a dial tone again. Repeat as necessary for other wall jacks.

• If there is a dial tone on at least one jack, but not all, then there is most likely a problem within the home wiring. Verizon can repair the jacks for a charge, or you can contact another vendor to repair the wiring.

• If you don’t hear a dial tone on any jacks, disconnect the base unit from the telephone jack and connect an alternate phone to verify if it is working or not.

• If there is still no dial tone, call the Verizon Support Center.

INTERNET SERVICE — TROUBLESHOOTING ROUTERS AND PCs.Coax WAN light on router does not illuminate:

1. Check the coax connections at the coax wall outlet and the router. Make sure the connectors are hand-tightened and not easily separated.

2. The coax wall outlet may not be connected to the home network; install the router at a different wall outlet.

Ethernet LAN lights on router do not illuminate:

1. Make sure the Ethernet cable is plugged into one of the four yellow ports (not the white port) on the back of the router.

2. For additional help, go to fioshelp.verizon.com and look under the FiOS Router Setup section, or call the Verizon Support Center.

Troubleshooting Phone and Internet

20

T:13 in

T:5.375 in

B:13.25 in

B:5.625 in



11 C Die Cut




CCF13070 eONT Self-Install Guide (Bottom)Inside Back Cover

T:13 inT:5.375 in

B:13.25 inB

:5.625 in


Installation - Verizon Fios & Custom TV | Internet, Cable … Name: eONT Guide Manual Studio Artist:...

Documents

Transcript of Installation - Verizon Fios & Custom TV | Internet, Cable … Name: eONT Guide Manual Studio Artist:...