Inspection-3rd Party

4
OES LIST OF SERVICES OES offer a range of oil rig equipment inspection, audit, project and structural services. With a dedicated full time team that has decades of technical experience, mobilise via our strategically located offices in order to accelerate mobilisation, we know we can deliver the right people where they are needed. Regional offices are now open in the UAE, Saudi Arabia, USA, Mexico, UK, Brazil, Angola, Malaysia and Singapore. We also have a local presence in Australia, Oman, Indonesia, Qatar, India and Egypt. In essence, OES are grouped into three divisions: OES SPECIAL SERVICES Hazardous Area (EX Surveys), also referred to as Intrinsic Safety Surveys IRT (Infrared Thermographic) Surveys Vibration Analysis Acoustic Emission (Noise Level) Surveys Lux (Light Emission) Surveys Critical Hose Register Surveys Pressure Relief Valves and Pressure Gauge Inspection and Testing RFID – Radio-Frequency Identification OES Dropped Objects Prevention Programme, DOPP eLearning Risk Reviews Cyber-Security Personnel Health and Monitoring Approved Honeywell Partner

Transcript of Inspection-3rd Party

Page 1: Inspection-3rd Party

OES LIST OF SERVICES OES offer a range of oil rig equipment inspection, audit, project and structural services. With a dedicated full time team that has decades of technical experience, mobilise via our strategically located offices in order to accelerate mobilisation, we know we can deliver the right people where they are needed. Regional offices are now open in the UAE, Saudi Arabia, USA, Mexico, UK, Brazil, Angola, Malaysia and Singapore. We also have a local presence in Australia, Oman, Indonesia, Qatar, India and Egypt. In essence, OES are grouped into three divisions: OES SPECIAL SERVICES

Hazardous Area (EX Surveys), also referred to as Intrinsic Safety Surveys

IRT (Infrared Thermographic) Surveys

Vibration Analysis

Acoustic Emission (Noise Level) Surveys

Lux (Light Emission) Surveys

Critical Hose Register Surveys

Pressure Relief Valves and Pressure Gauge Inspection and Testing

RFID – Radio-Frequency Identification

OES Dropped Objects Prevention Programme, DOPP

eLearning

Risk Reviews

Cyber-Security

Personnel Health and Monitoring

Approved Honeywell Partner

Page 2: Inspection-3rd Party

This division also incorporates our popular technical and contractor compliance audit services, for example:

Comprehensive audits on any type of drilling rig, workover or well services unit

Tailored Audits for example: HSE audits, preventative / predictive maintenance system audits, electrical audits, personnel competency audits, Operator compliance audits, etc.

Commissioning

Factory Acceptance Testing (FAT)

Integrated Acceptance Testing (IAT)

Auditing of rig build / repair facilities

Failure Modes and Effects Analysis (FMEA)

OES also provide experienced rig newbuild and rig refurbishment project management and support services, covering but not limited to the following:

Project management, assistance or specialists, either throughout the project from initial planning to spudding the rig, or any stages of the project in-between.

Rig New-build and refurbishment gap analysis assistance in preparing technical tender documentation

Key disciplines to support a project, for example: - Structural, Marine, Welding, Electrical, Mechanical, Piping, Drilling, QHSE, Project Administrator

Page 3: Inspection-3rd Party

OES INTERNATIONAL OES International provides a core range of frequently required inspections, either individually or as an inspection package containing an all-in-one mobilisation covering a broad scope. OES have large and/or small teams available for a wide range of spot and project related Non-Destructive Testing (NDT) work. Inspection Packages:

Inspection of all lifting equipment including load testing when necessary

Derrick/Mast inspections, NDT and bolt checks as relevant

NDT of drilling handling tools including tolerance checks

Dropped Objects Surveys

Ultrasonic Thickness (UT) of high pressure piping and pressure vessels

Permanent/Long Term Rotating Teams

NDT of Critical Load Path and Hoisting Equipment

API Drilling Tool Inspection

Various forms of NDT to cover due items including internal PM System, Class and API related requirements - , Dye Penetration Magnetic Particle Inspection (MPI), Eddy Current (ET), Ultrasonic thickness Gauging (UT), Phased Array, Radiography

In addition to the above services and package, OES International also provides the following:

Rope Access and various other at height work including repairs, difficult at height projects, etc

UT Gauging Class Special Periodic Surveys (SPS) under ABS, DNV or BV

UWILD Surveys

Load Testing Crane, Lifeboat Davit & BOP Handling Systems,

UT Piping Surveys

Page 4: Inspection-3rd Party

OES REGIONAL: OES Regional is the delivery of OES Services in regions where national support programmes require the combination of expatriate and local personnel to deliver a professional service backed-up by OES Certrack documentation. In this context OES works with local Agents and JVs to deliver a service that meets changing regional needs.

Inspections and Load Testing of lifting equipment fixed and mobile lifting points/equipment

PM and API related NDT including MPI and UT Gauging

Preparation of equipment for inspection and re-coating

Rope Access

Training and Consultation

Crane Inspections

Forklift Inspections

Fall Protection Surveys

Our website also provides further details on OES and our services.