Infrared Thermal Imaging Inspection Report-Production Lines
of 41
-
Upload
anonymous-wu6fdjb -
Category
Documents
-
view
228 -
download
1
Transcript of Infrared Thermal Imaging Inspection Report-Production Lines
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
1/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
1/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
Infrared Thermal ImagingInspection Report-ProductionLines
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
2/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
2/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 01:54:18 PM °C
Li1
28.5
22.3
IR_3231.jpg FLIR E50 49025354
15/12/2015 01:54:18 PM
DC_3232.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped.
Measurements °CLi1 Max 24.6
Min 23.8
Average 24.1
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteHeat Exchanger Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
3/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
3/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 01:57:27 PM °C
Li1
Li2
36.6
24.9
IR_3233.jpg FLIR E50 49025354
15/12/2015 01:57:27 PM
DC_3234.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped.
Measurements °CLi1 Max 28.6
Min 28.0
Average 28.4Li2 Max 29.4
Min 28.0
Average 28.8
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteFeyer Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
4/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
4/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:06:54 PM °C
Li1
38.2
20.2
IR_3249.jpg FLIR E50 49025354
15/12/2015 02:06:54 PM
DC_3250.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped.
Measurements °CLi1 Max 30.3
Min 28.0
Average 29.1
ParametersEmissivity 0.95
Refl. temp. 20 °C
Note
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
5/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
5/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:22:10 PM °C
Li1
44.0
29.4
IR_3273.jpg FLIR E50 49025354
15/12/2015 02:22:10 PM
DC_3274.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped.
Measurements °CLi1 Max 32.3
Min 30.6
Average 31.1
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 1
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
6/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
6/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:23:43 PM °C
Li1
45.2
27.1
IR_3275.jpg FLIR E50 49025354
15/12/2015 02:23:43 PM
DC_3276.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped
Measurements °CLi1 Max 31.4
Min 29.1
Average 29.8
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 2
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
7/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
7/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:25:11 PM °C
Li1
42.5
26.6
IR_3277.jpg FLIR E50 49025354
15/12/2015 02:25:11 PM
DC_3278.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped
Measurements °CLi1 Max 30.6
Min 27.9
Average 28.6
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 3
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
8/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
8/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:27:02 PM °C
Sp1
Li1
32.2
22.2
IR_3279.jpg FLIR E50 49025354
15/12/2015 02:27:02 PM
DC_3280.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, where the production line 1 stopped.
Measurements °CSp1 25.6
Li1 Max 30.5
Min 27.3 Average 28.9
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePacking 1
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
9/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
9/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:02:40 PM °C
Li1
Li2 Li3
30.5
22.0
IR_3241.jpg FLIR E50 49025354
15/12/2015 02:02:40 PM
DC_3242.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 25.8
Min 23.3
Average 25.2Li2 Max 25.9
Min 25.5
Average 25.8
Li3 Max 25.8
Min 25.6
Average 25.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteMain Oil Pump Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
10/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
10/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:04:43 PM °C
Li1Li2
29.3
23.0
IR_3247.jpg FLIR E50 49025354
15/12/2015 02:04:43 PM
DC_3248.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 28.5
Min 27.8
Average 28.2Li2 Max 29.3
Min 26.2
Average 28.8
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePreparation Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
11/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
11/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:08:48 PM °C
Li1
34.2
22.1
IR_3251.jpg FLIR E50 49025354
15/12/2015 02:08:48 PM
DC_3252.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 24.8
Min 24.4
Average 24.6
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteIntake Extension Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
12/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
12/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:11:00 PM °C
Li1
Li2
Li3
35.3
14.4
IR_3253.jpg FLIR E50 49025354
15/12/2015 02:11:00 PM
DC_3254.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 26.7
Min 24.3
Average 25.9Li2 Max 26.7
Min 26.4
Average 26.6
Li3 Max 26.3
Min 25.4
Average 26.0
ParametersEmissivity 0.95
Refl. temp. 20 °C
Note+PC1-1A
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
13/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
13/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:12:31 PM °C
Li1
Li2
37.2
25.8
IR_3257.jpg FLIR E50 49025354
15/12/2015 02:12:31 PM
DC_3258.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 28.0
Min 27.1
Average 27.4Li2 Max 26.9
Min 26.2
Average 26.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteIntake Extension Panel 2
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
14/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
14/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:15:57 PM °C
Sp1
Li1
Li2
36.8
24.6
IR_3261.jpg FLIR E50 49025354
15/12/2015 02:15:57 PM
DC_3262.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CSp1 31.3
Li1 Max 33.4
Min 30.8 Average 32.2
Li2 Max 33.3
Min 31.1
Average 32.5
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePotato Preparation Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
15/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
15/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:17:41 PM °C
Li1Li2
Li3
34.6
24.1
IR_3265.jpg FLIR E50 49025354
15/12/2015 02:17:41 PM
DC_3266.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 26.5
Min 25.9
Average 26.2Li2 Max 26.8
Min 26.1
Average 26.4
Li3 Max 26.5
Min 25.4
Average 26.0
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteM.O.P Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
16/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
16/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:17:59 PM °C
Li1
Li2
32.7
24.3
IR_3267.jpg FLIR E50 49025354
15/12/2015 02:17:59 PM
DC_3268.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 30.7
Min 29.2
Average 29.7Li2 Max 28.1
Min 26.5
Average 27.2
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteM.O.P Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
17/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
17/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:19:56 PM °C
Li1
Li2
Li3
Li4
29.1
23.1
IR_3269.jpg FLIR E50 49025354
15/12/2015 02:19:56 PM
DC_3270.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 24.3
Min 23.4
Average 23.7Li2 Max 24.5
Min 23.2
Average 23.8
Li3 Max 24.8
Min 24.0
Average 24.4
Li4 Max 25.1
Min 24.1
Average 24.5
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSlice wash & Fryer Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
18/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
18/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:20:17 PM °C
Sp1
Li1
29.6
20.1
IR_3271.jpg FLIR E50 49025354
15/12/2015 02:20:17 PM
DC_3272.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CSp1 27.8
Li1 Max 26.8
Min 26.1 Average 26.4
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSlice wash & Fryer Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
19/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
19/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:28:43 PM °C
Li1
Li2
Li3
Li4
Li5
39.2
21.3
IR_3281.jpg FLIR E50 49025354
15/12/2015 02:28:43 PM
DC_3282.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 39.0
Min 35.4
Average 37.0Li2 Max 34.3
Min 31.7
Average 32.7
Li3 Max 31.1
Min 28.9
Average 29.9
Li4 Max 29.5
Min 27.8
Average 28.9
Li5 Max 32.6
Min 30.4
Average 31.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePacking 2
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
20/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
20/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:31:22 PM °C
Li1
Li2
44.4
28.3
IR_3283.jpg FLIR E50 4902535415/12/2015 02:31:22 PM
DC_3284.jpgxt annotations
scription of analysis & observation Raised temperature are observed on line (2).
ion / Severity Monitor development and repair as necessary required for the Li (2). / low severity
de / Fault Four / Alert
ential impact upon severity Occur short circuiting/turn-to-turn faults.
nditions Found/Deviation Loose connections/poor contacts/rust/unbalanced loads/deteriorated internal contact/overloading/overheating is of concern.
ysical inspection/Electrical testing/Remedy The source of the raised temperature shall be investigated and eliminated by cleaning/tighten theconnection/inspection the internal component/change the component, if possible.
Measurements °CLi1 Max 40.3
Min 31.6
Average 36.8Li2 Max 47.9
Min 38.5
Average 42.6
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 4
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
21/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
21/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:33:02 PM °C
Li1
39.9
25.0
IR_3285.jpg FLIR E50 49025354
15/12/2015 02:33:02 PM
DC_3286.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, which isan acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 32.8
Min 27.8
Average 29.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteHeat Exchanger 2
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
22/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
22/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:34:49 PM °C
Sp1Sp2 Sp3
Li1
39.6
27.8
IR_3291.jpg FLIR E50 49025354
15/12/2015 02:34:49 PM
DC_3292.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, which isan acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CSp1 34.8
Sp2 36.1
Sp3 37.5Li1 Max 35.6
Min 31.5
Average 33.5
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteHeat Exchanger 3
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
23/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
23/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:36:23 PM °C
Sp1
Li1
39.1
20.5
IR_3297.jpg FLIR E50 49025354
15/12/2015 02:36:23 PM
DC_3298.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CSp1 22.9
Li1 Max 23.7
Min 21.8 Average 22.4
ParametersEmissivity 0.95
Refl. temp. 20 °C
Note 3
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
24/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
24/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:38:13 PM °C
Li1
Li2
31.8
15.2
IR_3301.jpg FLIR E50 49025354
15/12/2015 02:38:13 PM
DC_3302.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 24.1
Min 23.5
Average 23.8Li2 Max 23.9
Min 23.8
Average 23.9
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePreparation Line 3
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
25/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
25/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:38:44 PM °C
Li1
Li2
Li3
Li4
35.3
25.4
IR_3305.jpg FLIR E50 49025354
15/12/2015 02:38:44 PM
DC_3306.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 31.3
Min 30.6
Average 30.9Li2 Max 30.8
Min 27.1
Average 29.5
Li3 Max 35.7
Min 33.4
Average 34.5
Li4 Max 35.4
Min 28.6
Average 32.0
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePreparation Line 3
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
26/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
26/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:40:44 PM °C
Li1
Li2
40.0
25.6
IR_3311.jpg FLIR E50 49025354
15/12/2015 02:40:44 PM
DC_3312.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 37.9
Min 29.8
Average 34.4Li2 Max 36.6
Min 28.7
Average 32.1
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteM.O.P Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
27/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
27/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:40:33 PM °C
Li1
39.0
25.6
IR_3309.jpg FLIR E50 49025354
15/12/2015 02:40:33 PM
DC_3310.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 37.9
Min 28.7
Average 34.4
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteM.O.P Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
28/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
28/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:42:35 PM °C
Li1
Li2
29.6
14.3
IR_3313.jpg FLIR E50 49025354
15/12/2015 02:42:35 PM
DC_3314.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 18.5
Min 15.4
Average 16.8Li2 Max 21.2
Min 19.9
Average 20.5
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSlice wash & Fryer Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
29/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
29/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:43:15 PM °C
Li1Li2
Li3Li4
34.2
26.2
IR_3315.jpg FLIR E50 49025354
15/12/2015 02:43:15 PM
DC_3316.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
Measurements °CLi1 Max 28.9
Min 27.9
Average 28.3Li2 Max 28.7
Min 27.5
Average 28.2
Li3 Max 28.8
Min 27.0
Average 27.8
Li4 Max 28.7
Min 27.4
Average 28.0
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSlice wash & Fryer Panel
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
30/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
30/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:46:12 PM °C
Li1
Li2
41.8
27.0
IR_3317.jpg FLIR E50 49025354
Measurements °CLi1 Max 42.5
Min 41.3
Average 42.1Li2 Max 43.0
Min 35.6
Average 38.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 5
15/12/2015 02:46:12 PM
DC_3318.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
31/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
31/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:47:36 PM °C
Li1
Li2
34.0
24.9
IR_3319.jpg FLIR E50 49025354
Measurements °CLi1 Max 33.3
Min 28.2
Average 31.2Li2 Max 33.5
Min 29.5
Average 30.8
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 6
15/12/2015 02:47:36 PM
DC_3320.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
32/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
32/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 03:02:51 PM °C
Li1
Li2
28.7
19.5
IR_3341.jpg FLIR E50 49025354
Measurements °CLi1 Max 23.4
Min 22.9
Average 23.1Li2 Max 23.5
Min 22.6
Average 22.8
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePacking 3
15/12/2015 03:02:51 PM
DC_3342.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
33/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
33/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:50:17 PM °C
Li1
30.5
25.2
IR_3321.jpg FLIR E50 49025354
Measurements °CLi1 Max 30.2
Min 29.2
Average 29.6
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteOven RPS
15/12/2015 02:50:17 PM
DC_3322.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
34/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
34/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:50:29 PM °C
Li1
Li2
Li3
Li4
Li5
31.9
24.8
IR_3323.jpg FLIR E50 49025354
Measurements °CLi1 Max 29.9
Min 29.4
Average 29.7Li2 Max 29.9
Min 29.5
Average 29.7
Li3 Max 32.0
Min 30.9
Average 31.6
Li4 Max 31.5
Min 31.0
Average 31.3
Li5 Max 30.9
Min 30.4
Average 30.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteOven RPS
15/12/2015 02:50:29 PM
DC_3324.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
35/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
35/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:50:45 PM °C
Li1 Li2
Li3
41.7
26.0
IR_3325.jpg FLIR E50 49025354
Measurements °CLi1 Max 31.2
Min 29.8
Average 30.4Li2 Max 31.6
Min 30.5
Average 31.0
Li3 Max 38.0
Min 35.3
Average 36.7
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteOven RPS
15/12/2015 02:50:45 PM
DC_3326.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
36/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
36/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:52:45 PM °C
Li1
33.6
27.9
IR_3327.jpg FLIR E50 49025354
Measurements °CLi1 Max 29.1
Min 28.8
Average 29.0
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteProcess Control Panel
15/12/2015 02:52:45 PM
DC_3328.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
37/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
37/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:52:57 PM °C
Li1
Li2
Li3
Li4
33.9
26.4
IR_3329.jpg FLIR E50 49025354
Measurements °CLi1 Max 29.4
Min 29.1
Average 29.2Li2 Max 29.2
Min 29.0
Average 29.1
Li3 Max 29.3
Min 28.9
Average 29.1
Li4 Max 31.3
Min 30.4
Average 30.9
ParametersEmissivity 0.95
Refl. temp. 20 °C
15/12/2015 02:52:57 PM
DC_3330.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
38/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
38/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:53:40 PM °C
Li1 Li2Li3
59.3
26.5
IR_3333.jpg FLIR E50 49025354
Measurements °CLi1 Max 34.6
Min 33.0
Average 33.6Li2 Max 44.3
Min 39.6
Average 42.0
Li3 Max 34.0
Min 31.3
Average 32.2
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteProcess Control Panel
15/12/2015 02:53:40 PM
DC_3334.jpg
Text annotations
Description of analysis & observation Normal conditions are observed as the temp. diff. on the midle component is moreloaded than other component otherwise temp. diff. for each component is anacceptable.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
39/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
39/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:53:51 PM °C
Li1 Li2
40.2
27.8
IR_3335.jpg FLIR E50 49025354
Measurements °CLi1 Max 33.6
Min 29.2
Average 31.1Li2 Max 31.7
Min 28.7
Average 30.4
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteProcess Control Panel
15/12/2015 02:53:51 PM
DC_3336.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, which isan acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
40/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
40/41 Infrared Thermal Imaging Inspection ReportReport Author: Sherif Mounir AhmedMobile: +2 012 - 85 711 000Email: [email protected]
15/12/2015 02:56:59 PM °C
Li1
Li2
33.1
23.9
IR_3337.jpg FLIR E50 49025354
Measurements °CLi1 Max 32.8
Min 31.1
Average 32.2Li2 Max 30.6
Min 29.3
Average 30.2
ParametersEmissivity 0.95
Refl. temp. 20 °C
NoteSeasoning Loop 7
15/12/2015 02:56:59 PM
DC_3338.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
-
8/18/2019 Infrared Thermal Imaging Inspection Report-Production Lines
41/41
Industrial Services Center - Datco78 Al Moultka Al Araby st., Sheraton, 11361 Cairo - EgyptWeb Site: http://www.datcoegypt.com
15/12/2015 02:59:59 PM °C
Sp1
Li1
34.5
23.7
IR_3339.jpg FLIR E50 49025354
Measurements °CSp1 28.9
Li1 Max 29.7
Min 28.3 Average 28.9
ParametersEmissivity 0.95
Refl. temp. 20 °C
NotePacking 4
15/12/2015 02:59:59 PM
DC_3340.jpg
Text annotations
Description of analysis & observation Normal conditions are observed, the temp. diff. is less than 5°C as shown in theabove mentioned measurements table between the max. and the min. spots, whichis an acceptable diff.
Action / Severity No Action required / No severity
Code / Fault Normal condition / No fault
