Industrial Workstations GB - Rittal produkti/Industrial... · IW – PERFECT IN EVERY DETAIL 5...
Transcript of Industrial Workstations GB - Rittal produkti/Industrial... · IW – PERFECT IN EVERY DETAIL 5...
I N D U S T R I A L W O R K S T A T I O N S
The new dimension at the interface between man and machine for enhanced� workspace� safety� ergonomics
2
Diversity is the strength of Rittal Industrial Workstations.
More workspace than with a PC enclosure.
More compact than a desk.
Countless opportunities for expansion and a high level of security.
Precise, requirement-oriented solutions, thanks to standardised
and individual modules.
The PC enclosure systemThe ideal supplement or extension to the IW range. All configuration variants harmonise the functions, expansion options and design of the IW and PC.
See Innovations 2002, page 30 – 33.
Rittal Industrial Workstations
I W – M O D U L E S F O R Y O U R S O L U T I O N
These are just six examples from the many options availa-ble. Your requirements can be met to perfection with Rittal Industrial Workstations.
The modular IW system is explained and illustrated on page 10/11.
� Worktop with handle� Enclosure with drawer front� Stationary base/plinth
Rittal Industrial Workstat
� Monitor housing 21˝� Worktop with handle� Enclosure with designer door� Stationary base/plinth
� Optipanel with support arm components
� Worktop without handle� Enclosure with drawer
section and designer door� Stationary base/plinth with
twin castors
� Worktop� Enclosure with drawers and
designer door
ions
� Optipanel with enclosure attachment, tilting
� Worktop� Pedestal with trim panel
� Worktop� Pedestal with footrest
System benefits 4 – 7
Sample solutions – “Tailor-made” 8
Overview of modules 10
Enclosure with door variants 12
Enclosure with drawers 14
Worktops 16
Pedestal with worktop 18
Monitor and operating housings 20
Detailed drawings 22 – 25
Accessories 26 – 34
3
I W – PE R F E C T I N E V E R Y D E T A I L
Rittal Industrial Workstations
The design of Industrial Workstations is distinguished by its sleek
lines. A high degree of flexibility and a consistent orientation
towards user benefits are integral design criteria.
We skilfully meet these discerning requirements by drawing on the
modularity of the IW components and their perfect, practical detail
solutions.
The Ri-volutionary systemMulti-variable interior installation is offered by the TS 8 system. Two attachment levels on four inner frame surfaces facilitate optimum space utilisation coupled with fast configuration, e.g. with a mobile workstation for printers and tower PCs.
Individual and cost-effectiveSpecial IW accessories, such as the drawer tray with cross members and telescopic slides or pull-out component shelves, together with TS system accessories including a selection of punched rails, partial mounting plates and much more besides, create particularly cost-effective, customised solutions using standard components.
Integral securityThe workstation, as the nerve centre of a machine or plant, is pivotal to security. For this reason, all doors and drawers are equipped with locks. Added benefits are provided by the stylish comfort handle system, which may also be integrated into an existing lock system.
Design adds valueThe value of modern machine technology is also reflected in its design. For example, the design of the glazed door is skilfully extended into the base/plinth with reinforced stability. The interaction between function, form and ergonomics is a key economic factor throughout the entire IW range.
5
I W – T H E B A S I S F O R H O L I S T I C S O L U T I O N S
Rittal Industrial Workstations
Rittal offers its customers outstanding benefits, thanks to its holistic
approach and partnership-based solutions. We achieve targeted,
perfect, cost-effective solutions and create individuality from
standard system platforms.
It is the very simplicity of this concept which makes it so
convincing.
IW modules are equipped with climate control and electronic
components, comprehensive centralised security control, plus an
extensive range of accessories, for a complete solution.
Perfect solutions from a single source translate into cost benefits.
Ideal operating conditionsClimate control components, tailored to the specific heat loss and ambient conditions: Fan-and-filter units, heat exchangers, cooling units – particularly in compact sizes, ideal for IW enclosures.
“Plug and play” Under this concept, Rittal supplies standardised PC systems for industrial use. Ready wired and tested.
Control ensures successRittal CMC – the complete system for monitoring, control and reporting of all safety-relevant parameters in industrial control and networks. Bidirectional data communication allows the control centre to be situated at your location of choice.
System accessories create optimum requirements: such as potential equalisation, earthing, socket strips and lights for plug & play use.
7
8
Our task is to implement your chosen requirement profile with
absolute precision. Standardised IW modules provide the ideal
basis for this purpose. Complemented by modified or individual
components, this enables us to create customised workstations.
Rittal Industrial Workstations are at the heart of every configuration.
These are solutions with a special design flair. There are almost no
limits to the designer’s creativity.
In the production department, the IW range can be extended as required with individual worktops, including additional pedestals.Control desks – e.g. for printing presses with an individual control panel, and stylish enclosures for slimline HMI monitors.
The ideal laboratory workstation: A large worktop links the workbench to the PC enclosure. A socket strip and light are integrated into the shelving panel.
Rittal Industrial Workstations
I W – ” TA I L O R - M A D E ”
The IW enclosure with drawers is supplemented with enclosures with customised panels, combined with the support arm system, thus providing solutions for a wide range of laboratory equipment and small machines.
An overbuild or partially encapsulated workstation can also be developed from the IW concept.
A consistent, stylish design solution is derived by combining IW modules with the Automation enclosure based on TS 8.
IW as an extended workbench for small machines, including control and monitoring units.
Highly individualised workstations for measurement technology, calibration and monitoring are a particular speciality of the IW series.
Combination with the support arm system makes the IW concept particularly versatile and cost-effective, with minimal use of special components.
The IW monitor housing is combined with the modular diversity of the AP console system. Mounted on castors, this creates a mobile machine control centre.
The closed “mobile workstation”, secure and ideal for industry use, e.g. with guide handles and TFT screen.
It doesn’t get much more compact than this – scanner or laboratory workstation with secure accommodation e.g. of computer and laboratory equipment.
9
Rittal Industrial Workstations
10
The distinguishing feature of Rittal Industrial Workstations is their
flexible construction. Various possible combinations of individual
components are illustrated below.
Enclosure based on TSWidth 600 mm Depth 600 mm
17˝ monitor housingModel No. IW 6902.510
21˝ monitor housingModel No. IW 6902.500
Feet for monitor housingModel No. IW 6902.610
Rit
Spacer plateModel No. IW 6902.630
TurntableModel No. IW 6902.620
See page 16/17
RoofsolidModel No. IW 6902.400
Worktopsmall, solidModel No. IW 6902.300
WorktopsolidModel No. IW 6902.100
Worktopprepared for turntableModel No. IW 6902.110
See page 12/13
Designer door, rear panel screw-fastened from the insideHeight 900 mmModel No. IW 6900.000
Designer door, rear panel screw-fastened from the outsideHeight 1000 mmModel No. IW 6901.000
Designer door, rear doorHeight 900 mmModel No. IW 6900.100
Glazed door, rear door,Height 900 mmModel No. IW 6900.200
Stationary base/plinthModel No. PC 8800.920
Twin castorsModel No. PC 4634.500
tal Industrial Workstations
I W – VE R S A T I L I T Y T H R O U G H M O D U L A R I T Y
Rittal Industrial Workstations
Optipanel Custom made for TFT monitors or other display and input units
CP-L support arm system
Enclosure attachmenttiltingModel No. IW 6902.640
Worktopprepared for enclosure attachmentLeft-hand connectionModel No. IW 6902.120Right-hand connectionModel No. IW 6902.130
See page 16/17
Worktop with handle,solidModel No. IW 6902.000
Worktop with handle,prepared for turntableModel No. IW 6902.010
Worktop with handle,prepared for enclosure attachmentLeft-hand connectionModel No. IW 6902.020Right-hand connectionModel No. IW 6902.030
See page 18/19
Worktopprepared for tilting enclosure attachmentModel No. IW 6902.310
See page 14/15
Drawer section,designer door, rear doorHeight 900 mmModel No. IW 6900.400
Drawer front, rear panel screw-fastened from the insideHeight 900 mmModel No. IW 6900.600
See page 14/15
Worktop, keyboard drawer, designer door, rear doorHeight 1000 mmModel No. IW 6901.100*
RdrHM
oof, keyboard rawer, designer door, ear dooreight 1000 mmodel No. IW 6901.200*
*The fitted variants IW 6901.100 (with worktop) and IW 6901.200 (with roof) are also available with other worktops on request.
PedestalModel No. IW 6141.200
Twin castors Model No. PC 4634.500
11
12
Designer door, rear panel screw-fastened from the inside
Designer door, rear panel screw-fastened from the outside
Designer door, rear door
Glazed door, rear doorModel No. IW Width 600 mmDepth 600 mm 6900.000 6901.000 6900.100 6900.200
Height mm 900 1000 900 900Weight kg 54.9 59.8 59.9 60.6
Supply includes Design Material Colour
Enclosure
Frame structure with side panels, screw-fastened from the inside
Sheet steel 1.5 mmTextured RAL 7035(light grey)
� � � �Base with gland plate for cable entry
Levelling feet to compensate floor irregularities
Designer door
Vertical bars with locking rod and double-bit insert, hinged on right-hand side Aluminium section RAL 7035
� � �Door or installation plate, folded Sheet steel 1.5 mm RAL 7015
(slate grey)
Glazed doorVertical decorative trim panels Plastic to UL 94-V0 RAL 7035
�Glass with screen-printed mask Safety glass ESG 4.0 mm RAL 7015
Rear panelScrew-fastened from the inside
Sheet steel 1.5 mm Textured RAL 7035
�
Screw-fastened from the outside �
Rear door With locking rod and double-bit insert, hinged on the right-hand side Sheet steel 1.5 mm Textured
RAL 7035 � �
Lock systems: Standard double-bit lock insert, may be exchanged for lock inserts or comfort handle, see Catalogue 30, page 936 – 938, with front door only in conjunction with handle adaptor PC 8611.300, see Catalogue 30, page 153.
Rittal Industrial Workstations
I W E N C L O S U R E W I T H D O O R V A R I A N T S
A modern workstation: Consistent lines
from top to bottom! Monitor housings and
enclosures – each equipped with a glazed
door – create a formal unit including base/
plinth. The worktop with handle and
monitor turntable are stylishly integrated.
Note:� Other enclosure depths or heights,
variable on a 25 mm pitch pattern,� all IW components as well as system
accessories can be supplied fully assembled.
IW accessories see page 26 onwards.
Detailed drawings see page 22.
IW worktops see page 16/17.
IW monitor and operating housings see page 20/21.
13
Worktop, keyboard drawer, designer door, rear door
Roof, keyboard drawer, designer door, rear door
Drawer section, designer door, rear door
Drawer front, rear panel screw-fastened from the inside
14
Model No. IW Width 600 mmDepth 600 mm 6901.100 6901.200 6900.400 6900.600
Height mm 1000 1000 900 900Weight kg 91.2 85.7 73 78
Supply includes Design Material Colour
Enclosure
Frame structure with side panels, screw-fastened from the inside
Sheet steel 1.5 mmTextured RAL 7035(light grey)
� � � �Base with gland plate for cable entry
Levelling feet to compensate floor irregularities
Trim panel, top To finish off the enclosure at the top Plastic to UL 94-V0 RAL 7035
RAL 7015 � � �
Keyboard drawer
Drawer housingSheet steel 1.5 mm RAL 7035
� �
Extension piece with cable support, hinged, plus pull-out mousepad and keyboard cradle
Trim panel with recessed handle, folded as handrest, with lock no. 3524 E Plastic to UL 94-V0
RAL 7035RAL 7015 (slate grey)RAL 9006 (white aluminium)
Drawer section
Drawer tray, fitted with drawer trim panel and telescopic slides Sheet steel 1.5 mm RAL 7035
�Drawer trim panel with recessed handle, with fastener and lock no. 3524 E. Plastic to UL 94-V0
RAL 7035RAL 7015RAL 9006
Designer doorVertical bars with locking rod and double-bit insert, hinged on right-hand side Aluminium section RAL 7035
� � �Door or installation plate, folded Sheet steel 1.5 mm RAL 7015
Drawer front
Drawer tray, slotted all round for cross member retainers, 1 x with low trim panel, 2 x with high trim panel, each with recessed handle, telescopic slides
Sheet steel 1.5 mmRAL 7035RAL 7015RAL 9006
�
Worktop SolidChipboard, plastic-laminated on both sides, with edge strips
Similar to RAL 7035Edge strips: Similar to RAL 7015
�
Roof Edged, screw-fastened from the inside Sheet steel 1.5 mm Textured RAL 7035 �
Rear panel Screw-fastened from the inside Sheet steel 1.5 mm Textured RAL 7035 �
Rear door With locking rod and double-bit insert,hinged on the right-hand side Sheet steel 1.5 mm Textured
RAL 7035 � � �
Lock systems: Standard double-bit lock insert, may be exchanged for lock inserts or comfort handle, see Catalogue 30, page 936 – 938, for designer door only in conjunction with handle adaptor PC 8611.300, see Catalogue 30, page 153.
Rittal Industrial Workstations
I W E N C L O S U R E W I T H D R A W E R S
For a tidy workplace, the IW enclosure
offers plenty of storage space, either with a
complete drawer front or in combination
with the designer door. The special base/
plinth ensures stability, even with heavy
loads.
A broad range of expansion options, e.g.
with an elegant Optipanel enclosure for the
TFT monitor and a pre-prepared worktop
including handle, covers every conceivable
requirement.
Note:� Other enclosure depths or heights,
variable on a 25 mm pitch pattern,� all IW components as well as system
accessories, fully assembled ex works,� other drawer combinations,� fitted variants IW 6901.100 (with
worktop) and IW 6901.200 (with roof) also with other worktops,see page 16/17,
� drawers with extension lockare all available on request.
IW accessories see page 26 onwards.
Detailed drawings see page 22.
IW worktops see page 16/17.
IW monitor and operating housings see page 20/21.
Support arm system CP-L see Catalogue 30, page 242.
15
RoofEdged, attached from the inside.
Material:1.5 mm sheet steel
Surface finish:Spray finished in textured RAL 7035
Design solid
Width mm 600
Depth mm 640
Weight kg 7.4
Model No. IW 6902.400
WorktopsMaterial and surface finish:Chipboard, plastic-laminated on both sides, similar to RAL 7035 (pale grey), with tough plastic edge strip, similar to RAL 7015 (slate grey).
Without handle
Design Solid Solid Prepared for turntable Prepared for enclosure attachment*
Mounting cutout for enclosure attachment – – – left right
Width mm 610 1000 1000 1000 1000
Depth mm 645 895 895 895 895
Weight kg 11.6 24 23 23 23
Model No. IW 6902.300 6902.100 6902.1101) 6902.1201) 6902.1301)
* For CP-L enclosure attachment CP 6525.5X0, housing coupling CP 6525.0X0, angle coupling CP 6526.0X0, see Catalogue 30, page 249 – 251.1) Hole may be used in conjunction with the adaptor plate for connector grommet IW 6902.660 (see page 32) for cable entry!
With handle
(not suitable for use in enclosures with drawer section IW 6900.400)
16
Design Solid Prepared for turntable Prepared for enclosure attachment*
Mounting cutout for enclosure attachment – – left right
Width mm 1200 1200 1200 1200
Depth mm 950 950 950 950
Weight kg 34 33 33 33
Model No. IW 6902.000 6902.0101) 6902.0201) 6902.0301)
* For CP-L enclosure attachment CP 6525.5X0, housing coupling CP 6525.0X0, angle coupling CP 6526.0X0, see Catalogue 30, page 249 – 251.1) Hole may be used in conjunction with the adaptor plate for connector grommet IW 6902.660 (see page 32) for cable entry!
Rittal Industrial Workstations
I W W O R K T O P S
Every worktop has its own particular
strength: e.g. for TFT a monitor on the
support arm system CP-L, for monitor
housings on a turntable, or simply plenty of
work space.
Need a very specific format with additional
cutouts for your measurement, testing or
production technology? Give us a call!
Note:� Keyboard built into the worktop with
mousepad (including IP 67),� worktops in modified sizes and height-
adjustable,� all IW components as well as system
accessories can be supplied fully assembled,
� fitted variants IW 6901.100 (with worktop) and IW 6901.200 (with roof) also available with other worktops upon request.
IW accessories see page 26 onwards.
Detailed drawings see page 24.
17
PedestalThe panel moulding is opened for simple cable laying.
Material:Feet: Cast aluminiumCross-member, vertical support tubes: Steel Panels: Aluminium section
Colour: Feet, cross member, support tubes and worktop attachment: Textured RAL 7035Panels: Natural anodised
Note:Pedestal, height-adjustable, on request.
Width mm 600
Height mm 1093
Depth mm 700
Weight kg 33.7
Model No. IW 6141.200
WorktopPrepared for tilting enclosure attachment
Material and surface finish:Chipboard, plastic-laminated on both sides, similar to RAL 7035 (pale grey), with tough plastic edge strips, similar to RAL 7015 (slate grey).
Width mm 960
Height mm 38
Depth mm 600
Weight kg 16
Model No. IW 6902.310
18
Enclosure attachmenttiltingFor mounting underneath the worktop. Adjustable tilting angle: 40° backwards, 40° forwards.
Material:Sheet steel, spray finished in RAL 7024
Weight kg 1.6
Model No. IW 6902.640
Foot restMaterial:Connector pieces: Cast aluminium RAL 7035 (light grey)Round tube section: Aluminium, natural anodised
Supply includes:Including assembly parts
Weight kg 0.6
Model No. CP 6145.100
Trim panelMaterial:Cast aluminium, powder-coated in textured RAL 7035 (light grey)
Supply includes:Including assembly parts
Weight kg 1.6
Model No. CP 6144.100
Rittal Industrial Workstations
Base mountMaterial:Sheet steel, zinc-plated
Supply includes:Including posidrive raised countersunk screws M12
Weight kg 0.7
Model No. CP 6147.000
I W P E D E S T A L W I T H W O R K T O P
If you are prepared to sacrifice some
storage space in exchange for more
workspace, the pedestal with worktop is
the ideal choice. It boasts plenty of space
for your keyboard, mousepad and
production plans.
An ergonomic solution: The correct
inclination of the TFT monitor at the top –
e.g. in the customised Optipanel enclosure
(see Catalogue 30, from page 196) –
coupled with the foot rest at the bottom, for
a relaxed posture and changing work
positions.
The enclosure attachment can be mounted both on the support arm connection of the Optipanel enclosure as well as on the underside or rear of any given enclosures.
Note:� Other pedestal widths or heights,� keyboard and mousepad built into the
worktop (including IP 67),� worktops in modified sizesavailable on request.
IW accessories see page 26 onwards.
Detailed drawings see page 25.
Twin castors see page 27.
19
20
Monitor housingFront designer door, rear door with release for designer door. With cutout at the bottom and reinforcement for support arm connection CP-XL. Component shelf, slotted, for monitor.
Material:Enclosure, rear door and component shelf: 1.5 mm sheet steelDesigner door: Vertical plastic decorative trim panels to UL 94-V0Glass pane: Safety glass ESG 4.0 mm
Dimensions (W x H x D mm)
Weight (kg)
600 x 600 x 500 38
600 x 600 x 600 43
For screen Model No. IW
17˝ 6902.510
21˝ 6902.500
Surface finish:Enclosure and rear door: Textured RAL 7035Designer door: Decorative trim panels RAL 7035, screen-printed mask on glass pane RAL 7015Component shelf: RAL 7015
Lock systems: Standard double-bit lock insert may be exchanged for lock inserts or comfort handle, see Catalogue 30, page 936 – 938.
Feetfor monitor housing, see page 28.
Spacer platefor monitor housing, see page 28.
Turntablefor spacer or support plate, see page 28.
Rittal Optipanel A special, stylish enclosure made from extruded aluminium section. For installation depths of 50, 100 and 150 mm, the width and height are adapted to suit your TFT monitors or other display and input units. All enclosure depths may be combined with support arm system CP-L,see Catalogue 30, page 196.
Support arm system CP-LThe support section CP-L allows Optipanel operating housings to be positioned in a swivel, tilting and height-adjustable arrangement depending on the respective ergonomic conditions required,see Catalogue 30, page 242.
Rittal Industrial Workstations
I W M O N I T O R H O U S I N G S , O P E R A T I N G H O U S I N G S
As well as conventional monitors, TFT flat-
screens are also becoming increasingly
popular.
Within the context of its Industrial
Workstations series, Rittal offers a wide
range of standardised and individual
accommodation options for both variants.
Versatile ergonomic requirements, security
standards, individual sizes and design
lines are met to perfection.
IW accessories see page 26 onwards.
Detailed drawings see page 25.
IW worktops prepared for enclosure attachment or turntable,see page 16.
21
22
TE C H N I C A L D E TEnclosure with door variants
900
(100
0)
604
512
362
812
(912
)
63
512
900
604
362
812
636
A I L S
Enclosure with designer door, rear panel IW 6900.000 / IW 6901.000
6
869
900
Enclosure with designer door, rear door IW 6900.100
604
512
362
812
636
512
512 512
Enclosure with glazed door, rear door IW 6900.200
Rittal Industrial Workstations
TE C H N I C A L D E T A I L SEnclosure with drawers
Enclosure with worktop, keyboard drawer, designer door, rear door IW 6901.100
Rittal Industrial Workstations
512
362
604
1043
145
75
669
512
636
526
912
118
362
604
902
889
519
145
812
86.5
60
636
608
Enclosure with roof, keyboard drawer, designer door, rear door IW 6901.200
512
362
604
1018
669
744
145
75
912
118
512
636
526
512 512
Enclosure with drawer section, designer door, rear door IW 6900.400Max. load capacity of drawer: 15 kg
512 512
Enclosure with drawer front, rear panel IW 6900.600Max. load capacity per drawer: 30 kg
900
604
655
812
518
275
100
83
7514
532
032
0
Slots for cross members
23
24
TE C H N I C A L D E TWorktops/roof
60
317.
5
895
R 1
000
618
645
400
403
480
480
512
614
640
50
300
5075
13
A I L S
38
608512
RoofIW 6902.400
761
1009
1009
1000
Worktop without handle, prepared for enclosure attachment IW 6902.120 / IW 6902.130
(155)155
162.
5
895 76
1
(162
.5)60
R 1
000
38
610 38Worktop without handle, solidIW 6902.300
1200
Worktop with handle, solid IW 6902.000,prepared for turntable IW 6902.010
38
950
155
317.
560
R 1
000
1000 38
Worktop without handle, solid IW 6902.100,prepared for turntable IW 6902.110
1200
Worktop with handle, prepared for enclosure attachment IW 6902.020 / IW 6902.030
Rittal Industrial Workstations
(155)155
950
155
162.
5
(162
.5)
R 1
000
60
589
TE C H N I C A L D E T A I L SPedestal with worktop/monitor housing/accessories
312
Worktop for pedestal IW 6902.310
A – A
AA
600
11
15
521
946
285
660
M12
18
13
A
B C
950
484
490
38
260
600
Enclosure attachment, tilting IW 6902.640
Rittal Industrial Workstations
600
512
636
(536
)
502
(402
)
510
458
597
460
385
600
456
700
140
CP 6147.000
Ø 7
0
133
171
101
211
66
+40° –40°
70
42.5
40
95
22.5
M6
A
B
C
62
IW 6902.310
Prepared for enclosure with CP-L corner connection or CP-L connection console CP 6508.0X0
Prepared for connector gland SZ 2400.300 / SZ 2400.500
A
B
C
350
380
350
90
2
PedestalIW 6141.200
400
400
25
Ø 278
400
400
278
60 25
Preparation for worktop IW 6902.310
Preparation for trim panel CP 6144.100or foot rest CP 6145.100
Preparation for twin castors CP 6148.000 or base mount CP 6147.000
A
B
C
Monitor housingIW 6902.500 / IW 6902.510
Support plateIW 6902.650
TurntableIW 6902.620
262
328
Ø 276
Ø 315Ø 6.5
M6
Ø 11.42.5 14
for flat-headed screw M6
Spacer plateIW 6902.630
25
26
A C C E S S O R I E S
Base/plinth componentsfront and rearBase/plinth component consisting of one trim panel and two pre-configured square pieces. In 200 mm high base/plinth elements, one trim panel is divided into two for cable entry.
Supply includes:1 set = 2 base/plinth components, 4 cover caps,4 screws and captive nuts M12 for attachment to the enclosure.
Accessories:
Base/plinth trim, see below.Base assembly plates SO 2817.000, see Catalogue 30, page 886.
For width mm
Packs of
Model No. TS
100 mmhigh
200 mmhigh
600 1 set 8601.600 8602.600
Material Colour
Components Sheet steel RAL 7022
Cover caps Plastic RAL 9005
To order in RAL 7035 please add the extension .605 to the Model No.
Base/plinth trim, sideFor mounting between the base/plinth components. With 200 mm height, two 100 mm base/plinth trims may also be used.
Material:Sheet steel
Colour:RAL 7022 (umbra grey)
Supply includes:1 set = 2 base/plinth trim panels, including parts for attaching to the base/plinth compo-nents.
Accessories:
Assembly bolts for cable clamp rails SO 2819.000,see Catalogue 30, page 887.
Detailed drawingssee Catalogue 30, page 880.
For depthmm
Packs of
Model No. TS
100 mm high
200 mm high
600 1 set 8601.060 8602.060
To order in RAL 7035 please add the extension .065 to the Model No.
Base/plinth trimwith brush strip for TSTo supplement the modular base/plinth concept (see above). May also be retrospectively exchanged for the front or rear trim panel of the base/plinth components 100 or 200 mm.By rotating the trim panel, the T-head strip for cable attachment may optionally be positioned at the top or bottom.
Material:Sheet steel
Supply includes:Base/plinth trim including brush strip.
Accessories:
Cable tie for quick assembly,see Catalogue 30, page 1010.
Width HeightModel No. TS
RAL 7022 RAL 7035
600 mm 100 mm 8601.610 8601.615
800 mm 100 mm 8601.810 8601.815
Rittal Industrial Workstations
Levelling feetTo compensate for height differences in the event of floor irregularities.
Adjustment range 0 – 30 mmThread length 40 mm.Thread M12 for direct screw-fastening into the enclosure corner pieces.Maximum permissible static load:approx. 300 kg per levelling foot.
Accessories:
For mounting on the TS base/plinth:Base/plinth adaptor TS 8800.220,see Catalogue 30, page 882.
Packs of Model No. PS
4 4612.000
A C C E S S O R I E S
Rittal Industrial Workstat
Base/plinth, stationaryIntegrated into the design of the enclo-sure, height 100 mm, with projection at the front, extremely versatile.
For depth mm Model No. PC
600 8800.920
Supply includes Design Material Colour
2 depth stays With attachment facility for� Twin castors PC 4634.500,
see page 27� Levelling feet PS 4612.000,
see page 26� Mounting bolts for cable clamp
rails SO 2819.000,see Catalogue 30, page 887
� Support bracket PS 4183.000,see Catalogue 30, page 979
Sheet steel 2.0 mm Textured RAL 7035(light grey)
With 2 cover caps Cast aluminium RAL 7035
1 trim panel at the rear
For screw-fastening to depth stays Sheet steel 2.0 mm TexturedRAL 7035
1 trim panel at the front
For screw-fastening to depth stays Aluminium section RAL 7015(slate grey)
Twin castorsFor mobile use, easily fitted. Thread M12.
Max. load capacity (per castor):120 kgGround clearance:125 mm
Colour:Black
Supply includes:1 set =2 twin castors with brake,2 twin castors without brake.
Accessories:
For mounting on the base/plinth compo-nents front and rear:Base/plinth adaptor TS 8800.290,see Innovations 2002, page 73.
Packs of Model No. PC
1 set 4634.500
Handle setSee Innovations 2002, page 53.
Ring board, clipboardSee Catalogue 30, page 212.
Square and U-handleSee Catalogue 30, page 211.
Metal gland platefor module plate
Lock systemsSee Catalogue 30,
27
ions
May be exchanged for the cable gland plate included with the supply.
Metal gland platesee Catalogue 30, page 264.
Module platesSee Catalogue 30, page 908.
page 936 – 938.
Handle adaptorfor designer and glazed door
See Catalogue 30, page 53.
28
A C C E S S O R I E S
Feetfor monitor housingThread length 29 mm.Attachment thread M8.Static load per foot: 300 kg.
Packs of Model No. IW
4 6902.610
Support platefor monitorsRotates in conjunction with turntable IW 6902.620.
Material:Chipboard, plastic-laminated on both sides, similar to RAL 7035 (pale grey), with tough plastic edge strips, similar to RAL 7015 (slate grey).
Note:� Other sizes� With drilled holesavailable upon request.
Accessories:
Turntable,see below.
Detailed drawingsee page 25.
Width mm
Height mm
Depth mm
Model No. IW
400 25 400 6902.650
Spacer platefor monitor housingCreates distance between the enclosure and worktop to prevent damage to the mouse and keyboard.
Material:Chipboard, plastic-laminated on both sides, similar to RAL 7035 (pale grey), with tough plastic edge strips, similar to RAL 7015 (slate grey).
Note:If a wider gap is required, 2 spacer plates may also be screw-fastened on top of one another.
Accessories:
Turntable,see below.
Detailed drawingsee page 25.
Width mm
Height mm
Depth mm
Model No. IW
400 25 400 6902.630
Turntablefor spacer plate IW 6902.630 and support plate IW 6902.650.Rotation range 350°, may be limited by 3 limit stops.Diameter: 328 mmHeight: 14 mmLoad capacity: 300 kg
Material:Cast aluminium
Colour:Black, powder-coated
Supply includes:Turntable including assembly parts.
Detailed drawingsee page 25.
Packs of Model No. IW
1 6902.620
Rittal Industrial Workstations
A C C E S S O R I E S
Rittal Industrial Workstations
IW 6902.640
IW 6902.670
Stay for monitor housingsCompression spring for automatic latching of turntable IW 6902.620.Released via a knob handle mounted on the side of the monitor housing. Delivery times available on request.
Packs of Model No. IW
1 6902.680
Enclosure attachment, tiltingFor external mounting beneath:
Packs of Model No. IW
1 6902.640
For external mounting on:� Surfaces� Housing coupling/enclosure attachment
CP-L, square, see Catalogue 30, from page 250
� Housing coupling/enclosure attachment CP S, see Innovations 2002, page 46
To fit enclosures with cutout:� CP-S, see Innovations 2002, page 12� CP-L square,
see Catalogue 30, page 250� CP-L round,
see Catalogue 30, page 250� VESA Standard 75
With cable tube for protected cable entry.
Packs of Model No. IW
1 6902.670
� Worktop with pedestal� Sufficiently large surfaces.
To fit enclosures with mounting cutout:� CP-L, square (e.g. Optipanel)
see Catalogue 30, page 206.
With mounting cutout for connector gland for sealed cable entry.
Tilt angle:+ 40°/– 40°
Material:Sheet steel, spray finished in RAL 7024 (graphite grey)
Accessories:
Connector gland,see page 32.
Worktop
max
. 62
70
+ 40° – 40°
66
171
211
min. 101
Tilt angle:+ 100°/– 60°
Material:Sheet steel, spray finished in RAL 7024 (graphite grey)Plastic cable tube,RAL 7035 (light grey)
29
30
A C C E S S O R I E S
Component shelf, static installationCorresponding to the enclosure depth, for direct mounting in the vertical system punchings. Simply locate into 4 pre-fitted screws and secure.
Usable surface W x D: 505 x 550 mmClearance between component shelf and– side panel: 44.5 mm– rear panel/door: 25 mm
Material:Sheet steel
Colour:RAL 7015 (slate grey)
Load capacity:50 kg
Accessories:
Fan extension kit DK 7980.000,see Catalogue 30, page 959.
For depth mm Model No. PC
600 8800.900
Component shelf, pull-outFor direct attachment on the enclosure
For depth mm Model No. IW
600 6902.9601)
frame. Additional punched sections are not required.
Usable surface W x D: 465 x 545/745 mmClearance between component shelf and– side panel: 44.5 mm– rear panel/door: 65 mm
Material:Sheet steel
Colour:RAL 7015 (slate grey)
Load capacity:40 kg
Supply includes:Component shelf with 2 telescopic slides (supplied loose).
Note:Suitable for installation in all enclosures, without mounting plate, with W x D 600 x 600/800 mm based on TS (rear attachment of telescopic slides extendible).
800 6902.9801) May also be mounted in 800 mm deep enclo-sures based on TS (rear attachment extendible).
Drawer traypull-outIndividual sub-division is possible via the use of cross members.Tray height: 83 mm
Usable surface W x D: 465 x 515 mmClearance between drawer tray and– side panel: 44.5 mm– rear panel/door: 65 mm
Material:Sheet steel
Colour:RAL 7035 (light grey)
Load capacity:40 kg
Supply includes:Drawer tray with 2 telescopic slides (supplied loose).
Note:Suitable for installation in all enclosures, without mounting plate, with W x D 600 x 600/800 mm based on TS (rear attachment of telescopic slides extendible).
Accessories:
Cross members, see below.
For depth mm Model No. IW
600 6902.700
see note belowIW 6902.710
Cross membersfor drawer trayFor individual sub-division of the drawer tray.
Material:Sheet steel
Colour:RAL 7035
Supply includes:Cross members including plastic holder.
Note:When sub-dividing the drawer tray, one cross-member is always needed for the entire width (IW 6902.710).
For sub-division in Packs of Model No. IW
full width 4 6902.710
half-width 6 6902.720
Rittal Industrial Workstations
A C C E S S O R I E S
Rittal Industrial Workstations
Fig. 1
Fig. 2
Telescopic slidesFor locating into the vertical frame section. Additional punched sections are not required. Full withdrawal.
Material:Sheet steel, zinc-plated, passivated.
Load capacity:40 kg per pair.
Supply includes:Telescopic slides, including assembly parts.
Note:Suitable for installation in all enclosures, without mounting plate, with W x D 600 x 600/800 mm based on TS (rear attachment of telescopic slides extendible).
Packs of Model No. IW
1 pair 6902.800
Slot-in bracket for shelvesSimply slot into the vertical TS section. May be additionally secured with screws. Support surface for shelves: 200 mm.
Material:Sheet steel
Colour:RAL 7035
Delivery times available on request.
Packs of Model No. IW
3 pairs 6902.690
Mouse, mousepad IP 67An ideal input device for all areas where heavy contamination is unavoidable, or where high standards of hygiene are crucial, for example in the food industry or medical technology.Because position sensing of the mouse is based on an inductive process, there is no need for a roller mechanism and the housing is completely sealed at the top via a protective film. This achieves a high protection category of IP 67.The mouse operates in conjunction with the inductive mouse pad IP 67 which is available for connection to either a COM or a PS/2 interface.
Material:Mousepad: Plastic PBTMouse: Plastic ABS
Colour:Mousepad: Grey (similar to RAL 7035)Mouse: Grey (similar to RAL 7032)
Technical specifications:
IP 67 mouseMouse connector: DIN 7-pole
Mousepad COM interfaceMousepad – PC connection:9-pole D-SUB socketDIN 5-pole connector
Mousepad PS/2 interfaceMousepad – PC connection:PS/2 connector
Temperature range: 0 °C to + 55 °CCurrent rating: < 20 mAPad size (W x H x D in mm):250 x 205 x 15Cable lengths: 2,000 mmRuns under DOS, Windows 3.1/3.11,Windows 95/98, Windows NT
Accessories:
Connector gland (SZ 2400.500),see page 32.
Packs of Model No. SM
Inductive mousepad IP 67COM interface (Fig. 1) 1 6444.000*
Inductive mousepad IP 67PS/2 interface (Fig. 2) 1 6444.500*
Mouse IP 67For COM and PS/2 interface 1 6445.000
* German patent no. 198 51 619
31
32
A C C E S S O R I E S
Ø 8
35
55
SZ 2400.300
4
41.5
Connector glandFor simple entry of cables which are pre-assembled with connectors. Simply insert the cables, screw-fasten, and voilà! The high protection category of IP 65 is retained in full.
Technical specifications:� For mounting on any sufficiently large
surface, e.g. front panels.� To fit 2 cables up to a diameter of 8 mm
or 3 cables up to a diameter of 6 mm.� For material thicknesses of 4 mm,
e.g. in front panels, sheet steel panels.� Strain relief of the pre-assembled
cables can be achieved with cable ties.
Material:Plastic
Colour:RAL 9005 (black)
Supply includes:Dividable connector gland,including assembly parts.
Rittal service:
Cutouts can be made by our service centres.
42
22
Ø 6
35
55
4 4
41.5
21.5
11 25
36 3
SZ 2400.500
Mounting cutout
To fit Packs of Model No. SZ
2 cables 1 2400.300
3 cables 5 2400.500
Adaptor platefor connector entryFor mounting on the worktop, with cutout and holes for turntable or enclosure attach-ment.
Material:Sheet steel, zinc-plated, passivated.
Supply includes:Adaptor plate with seal, including assem-bly parts.
Also required:
Connector gland SZ 2400.300 or SZ 2400.500, see above.
Packs of Model No. IW
1 6902.660
Rittal Industrial Workstations
A C C E S S O R I E S
Rittal Industrial Workstations
Mobile workstationfor tower PC, printer, USB, server etc.
Material:Sheet steel
Colour:Similar to RAL 7035 (light grey)
Load capacity: 75 kg
Supply includes:Mobile workstation consisting of:1 mounting frame,2 shelves, top/bottom,1 set of telescopic slides,1 handle,1 cable support, hinged,mounting accessories.
Also required:
2 punched sections with mounting flanges TS 8612.060,see Catalogue 30, page 974.
Accessories:
Fastening bolts DK 7115.000, see Catalogue 30, page 993.
471
471
550
25
391
451
19
25
4552
445
614
55
220
Packs of Model No. PC
1 4641.000
Shelffor mobile workstationTo accommodate additional equipment such as modems, power packs etc. or simply as a paper tray.The shelf may be attached to the mobile PC workstation with height adjustment on a 25 mm pitch pattern.
Material:Sheet steel
Colour:Similar to RAL 7035 (light grey)
Supply includes:Shelf including assembly parts.
Accessories:
Fastening bolts DK 7115.000,see Catalogue 30, page 993.
Packs of Model No. PC
1 4642.000
33
34
A C C E S S O R I E S
System lightsSee Catalogue 30, page 997 – 999.
Socket stripsSee Catalogue 30, page 1006/1007.
Signal pillarsSee Catalogue 30, page 1000 – 1002and Innovations 2002, page 86.
Partial mounting Interior installation,
plates for TS See Catalogue 30, page 968.rail systemsSee Catalogue 30, page 970 – 985.
Climate controlSee Catalogue 30, page 446 – 573.
ElectronicsSee Catalogue 30, page 314 – 445.
Cable attachmentSee Catalogue 30, page 1010.
482.6 mm (19˝) installation system See Catalogue 30, page 1014 – 1059.
Rittal Industrial Workstations
I N D E X
35
Rittal Industrial Workstations
Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page
Numerics482.6 mm (19˝) installation system 34
AAccessories 26 – 34Adaptor plate for connector entry 32
BBase mount for pedestal 18Base/plinth 26Base/plinth components front and rear 26Base/plinth trim, side 26
CCable attachment 34Castors
see twin castors 27Climate control 34Clipboard 27Component shelves 30Connector cable
see connector gland 32Connector gland 32Cross members for drawer tray 30
DDoor variants 12Drawer tray, pull-out 30Drawings 22 – 25
EElectronics 34Enclosure– with door variants 12– with drawers 14Enclosure attachment, tilting 29Enclosure lights
see system lights 34
FFeet for monitor housing 28Foot rest for pedestal 18
GGland plates
see metal gland plates 27
HHandle adaptor
see lock systems 27Handle set 27Handle systems
see lock systems 27
IInterior installation 34
LLevelling feet 26Lights
see system lights 34Lock systems 27
MMetal gland plates for module plates 27Mobile workstation for tower PC,
printer, USB, server etc. 33Module plates for metal gland plates 27Monitor housing 20
– stay 29Mounting plates
see partial mounting plates 34Mouse, mousepad IP 67 31
OOperating housings 20Optipanel 20
PPartial mounting plates for TS 34PC mobile workstation
see mobile workstation 33Pedestal 18
RRail systems
see interior installation 34Ring board 27Roof 16
SShelf for mobile workstation 33Shelves
see component shelves 30Signal pillars 34Slot-in bracket for shelves 31Socket strips 34Spacer plate for monitor housing 28Square and U-handle 27Stay for monitor housings 29Support arm system CP-L 20Support plate for monitors 28System lights 34
TTabletops
see worktops 16Telescopic slides 31Trim panel for pedestal 18Turntable 28Twin castors 27
UU-handle 27
WWorktops– for enclosure 16– for pedestal 18
2400.300 32
2400.500 32
4612.000 26
4634.500 27
4641.000 33
4642.000 33
6141.200 18
6144.100 18
6145.100 18
6147.000 18
6444.000 31
6444.500 31
6445.000 31
6900.000 12
6900.100 12
6900.200 12
6900.400 14
6900.600 14
6901.000 12
6901.100 14
6901.200 14
6902.000 29
6902.010 16
6902.020 16
6902.030 16
6902.100 16
6902.110 16
6902.120 16
6902.130 16
6902.300 16
6902.310 18
6902.400 16
6902.500 20
6902.510 20
6902.610 28
6902.620 28
6902.630 28
6902.640 29
6902.650 28
6902.660 32
6902.670 29
6902.680 29
6902.690 31
6902.700 30
6902.710 30
6902.720 30
6902.800 31
6902.960 30
6902.980 30
8601.060 26
8601.600 26
8601.610 26
8601.615 26
8601.810 26
8601.815 26
8602.060 26
8602.600 26
8800.900 30
8800.920 27
We reserve the right to further develop-ments and technical modifications of our products. Such modifications, along with errors and printing errata, shall not constitute grounds for compensation. We refer customers to our Terms of Sale and Delivery.
Rittal GmbH & Co. KG
�
P. O. Box 16 62
�
D-357Telephone: (0 27 72) 5 05-0
�
Fax: (0 27 72) 5 05
Rittal – Holistic expertise for
successful teamwork between man
and machine
Clear, safe and ergonomically correct
conditions for the operation and
monitoring of complex machine
processes are a key factor of success.
PC enclosure and case systemsComputer, monitor, keyboard and printer are accommodated to perfection, with high standards of safety and user-friendliness.
Console systemsNumerous variants and modular combinations to tackle all machine control and control room tasks.
Command panel systemsfor virtually all panel combinations and to suit all design requirements. Either customised or in standard sizes, they may be combined with support arm systems in three load capacity levels depending on requirements.
Rittal offers an extensive and versatile product range at the interface between man and machine: One segment of the Rittal enclosure systems division.
Capitalise on the holistic expertise of a powerful partner:
-w.d
e
� Industrial enclosures� Electronic packaging� System climate control
� Power distribution� IT solutions� Communication systems
Switch to perfection
R26 Herborn-2319 � eMail: [email protected] � www.rittal.com
08/0
2E
120
Kon
zep
t und
Lay
out
gm