Including Solar Panel and Inverter PV Manufacturers - Pallet ......HIGH EFFICIENCY MULTICRYSTAL...

2
CUTTING EDGE TECHNOLOGY As a pioneer with four decades of experience in the development of photovoltaic systems, Kyocera drives the market as a leading provider of PV products. We demonstrate our Kaizen philosophy, or commitment to continuous improvement, by setting the industry standard in the innovation of best-in-class solar energy equipment. QUALITY BUILT IN UV-stabilized, anodized aluminum frame in black Supported by major mounting structure manufacturers Easily accessible grounding points on all four corners for fast installation Proven junction box technology with 12 AWG PV wire works with transformerless inverters Locking plug-in connectors provide safe, quick connections PROVEN RELIABILITY Kyocera modules confirmed by the Desert Knowledge Australia Solar Centre to have the highest average output of any crystalline module First module manufacturer in the world to pass long- term sequential testing performed by TÜV Rheinland This series construction also passed TÜV Rheinland’s Salt Mist Corrosion Test at Severity Level 6, the most intense test conditions available Only module manufacturer to achieve the rank of “Performance Leader” in all six categories of GTM Research’s 2014 PV Module Reliability Scorecard CERTIFICATIONS UL1703 Certified and Registered, UL Module Fire Performance: Type 2, CEC NEC2008 Compliant, IEC 61215/61730, and ISO 14001 IEC61701 Ed.2 Severity 6 (Salt Mist Corrosion Test) KD 200-60 F Series KD260GX-LFB2 KD265GX-LFB2 HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE OUR VALUED PARTNER

Transcript of Including Solar Panel and Inverter PV Manufacturers - Pallet ......HIGH EFFICIENCY MULTICRYSTAL...

Page 1: Including Solar Panel and Inverter PV Manufacturers - Pallet ......HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax 032114 OUR VALUED

CUTTING EDGE TECHNOLOGYAs a pioneer with over 39 years in the solar energy

industry, Kyocera demonstrates leadership in the

development of solar energy products. Kyocera’s

Kaizen Philosophy, commitment to continuous

improvement, is shown by repeatedly achieving

world record cell efficiencies.

QUALITY BUILT IN• UV stabilized, aesthetically pleasing black

anodized frame

• Supported by major mounting structure

manufacturers

• Easily accessible grounding points on

all four corners for fast installation

• Proven junction box technology with 12 AWG

PV wire to work with transformerless inverters

• Quality locking plug-in connectors to

provide safe and quick connections

RELIABLE• Proven superior field performance

• Tight power tolerance

• First module manufacturer to pass rigorous

long-term testing performed by TÜV Rheinland

QUALIFICATIONS AND CERTIFICATIONS

HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE

KD 200-60 F SeriesKD250GX-LFB3 KD 255GX-LFB3

UL Listing

QIGU.E173074

NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001

UL1703 Certified and Registered, UL Fire Safety Class C

CUTTING EDGE TECHNOLOGYAs a pioneer with four decades of experience in the development of photovoltaic systems, Kyocera drives the market as a leading provider of PV products. We demonstrate our Kaizen philosophy, or commitment to continuous improvement, by setting the industry standard in the innovation of best-in-class solar energy equipment.

QUALITY BUILT IN• UV-stabilized, anodized aluminum frame in black

• Supported by major mounting structure manufacturers

• Easily accessible grounding points on all four corners for fast installation

• Proven junction box technology with 12 AWG PV wire works with transformerless inverters

• Locking plug-in connectors provide safe, quick connections

PROVEN RELIABILITY• Kyocera modules confirmed by the Desert Knowledge

Australia Solar Centre to have the highest average output of any crystalline module

• First module manufacturer in the world to pass long-term sequential testing performed by TÜV Rheinland

• This series construction also passed TÜV Rheinland’s Salt Mist Corrosion Test at Severity Level 6, the most intense test conditions available

• Only module manufacturer to achieve the rank of “Performance Leader” in all six categories of GTM Research’s 2014 PV Module Reliability Scorecard

CERTIFICATIONS • UL1703 Certified and Registered, UL Module Fire

Performance: Type 2, CEC

• NEC2008 Compliant, IEC 61215/61730, and ISO 14001

• IEC61701 Ed.2 Severity 6 (Salt Mist Corrosion Test)

KD 200-60 F SeriesKD260GX-LFB2 KD265GX-LFB2

HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

OUR VALUED PARTNER

Page 2: Including Solar Panel and Inverter PV Manufacturers - Pallet ......HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax 032114 OUR VALUED

Standard Test Conditions (STC)STC=1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

Cells per module: 60 (6 x 10)

MODULE CHARACTERISTICS

PACKAGING SPECIFICATIONS

Dimensions:length/width/height

65.43in/38.98in/1.81in(1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

Modules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: length/width/height

66in/40in/47in(1675mm/1005mm/1175mm)

Pallet box weight: 990lbs (450kg)

ELECTRICAL SPECIFICATIONS

Pmax

Vmp

260

31.0

Imp 8.39 A

Voc 38.3 V

Isc 9.09 A

Ptolerance +5/-0 %

KD260GX-LFB2

Nominal Operating Cell Temperature Conditions (NOCT)NOCT=800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT

Pmax

45

187

Vmp 27.9 V

Imp 6.71 A

Voc 35.1 V

Isc 7.36 A

PTC 232.9 W

oC

W

Pmax

Vmp

-0.45

-0.48

Imp 0.02 %/oC

Voc -0.36 %/oC

Isc 0.06 %/oC

Operating Temp -40 to +90 oC

Temperature Coefficients

%/oC

%/oC

Series Fuse Rating

Maximum DC System Voltage (UL)

Hailstone Impact in (25mm) @ 51mp (23m/s)

System Design

15 A

600 V

*Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 www.kyocerasolar.com

W

V

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

NEC 2008 COMPLIANTUL 1703 LISTED070914

KYOCERA Solar, Inc. 800-223-9580 800-523-2329 fax www.kyocerasolar.com

OUR VALUED PARTNER032114

KD 200-60 F Series

ELECTRICAL SPECIFICATIONS MODULE CHARACTERISTICSDimensions: 65.43in/38.98in/1.81in length/width/height (1662mm/990mm/46mm)

Weight: 44.1lbs (20.0kg)

PACKAGING SPECIFICATIONSModules per pallet: 20

Pallets per 53’ container: 36

Pallet box dimensions: 66in/40in/47in length/width/height (1675mm/1005mm/1175mm)

Pallet box weight: 990 lbs (450kg)

Standard Test Conditions (STC) STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*

KD245GX-LFB2 KD250GX-LFB2

Pmax 245 250 W

Vmp 29.8 29.8 V

Imp 8.23 8.39 A

Voc 36.9 36.9 V

Isc 8.91 9.09 A

Ptolerance +5/-0 +5/-0 %

Nominal Operating Cell Temperature Conditions (NOCT) NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*

TNOCT 45 45 oC

Pmax 176 180 W

Vmp 26.8 26.8 V

Imp 6.58 6.72 A

Voc 33.7 33.7 V

Isc 7.21 7.36 A

PTC 219.1 223.7 W

Temperature Coefficients

Pmax -0.46 -0.46 %/oC

Vmp -0.52 -0.52 %/oC

Imp 0.0065 0.0065 %/oC

Voc -0.36 -0.36 %/oC

Isc 0.060 0.060 %/oC

OperatingTemp -40 to +90 -40 to +90 oC

System Design

Series Fuse Rating 15 A

Maximum DC System Voltage (UL) 600 V

Hailstone Impact in (25mm) @ 51mph (23m/s)

* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.

NEC 2008 COMPLIANTUL 1703 LISTED

WARNING: Read the instruction manual in its entirety prior to handling, installing & operat-

ing Kyocera Solar modules.

KD 200-60 F Series

KD265GX-LFB2

265

31.0

8.55

38.3

9.26

+5/-0

45

191

27.9

6.85

35.1

7.49

238.1

-0.45

-0.48

0.02

-0.36

0.06

-40 to +90

www.kyocerasolar.com | tel. 800.223.9580 | [email protected]