IMPELLER PACKER - Magnum Systems Inc...IMPELLER PACKER Engineering, Design & Manufacturing to Keep...
2
IMPELLER PACKER Engineering, Design & Manufacturing to Keep the Line Moving MODEL IPO Magnum Systems Model IPO was designed for practical performance on heavy, dense, difficult-to-feed powders, and fine granular mixtures. The Model IPO utilizes felt split shaft seals on the rotating impeller and feed screw drive shaft to prevent leakage and screws are used to keep the material flowing into the impeller blades. PACKAGE HEAVY AND DENSE MATERIALS WITH SPEED AND PRECISION Features • Single spout • Hardened impeller with dual feed screws • Dust tight inflatable bag spout • Integral controls package • T4000 weigh controller with digital readout Standard Options • Stainless steel construction/contact areas • Dual set point • Container platform and lift • Storage hopper • T3000 weigh controller • Downstream sealing, conveying and palletizing equipment Materials Typically Handled • Grout mixes • Cement • Stucco • Clays • Fly ash • Limestone
Transcript of IMPELLER PACKER - Magnum Systems Inc...IMPELLER PACKER Engineering, Design & Manufacturing to Keep...
IMPELLER PACKER
Engineering, Design & Manufacturingto Keep the Line Moving
MODEL IPO
Magnum Systems Model IPO was designed for practical performance on heavy, dense, difficult-to-feed powders, and fine granular mixtures. The Model IPO utilizes felt split shaft seals on the rotating impeller and feed screw drive shaft to prevent leakage and screws are used to keep the material flowing into the impeller blades.
PACKAGE HEAVY AND DENSE MATERIALS WITH SPEED AND PRECISION
Features• Single spout• Hardened impeller with dual feed screws• Dust tight inflatable bag spout• Integral controls package• T4000 weigh controller with digital readout
Standard Options• Stainless steel construction/contact areas• Dual set point• Container platform and lift• Storage hopper• T3000 weigh controller• Downstream sealing, conveying and palletizing
equipment
Materials Typically Handled• Grout mixes• Cement• Stucco• Clays• Fly ash• Limestone
Speed Up to 8 BPM
Accuracy + 0.2 lbs
Bag Weight Range 15 lbs to 125 lbs (6.8 kg to 56.7 kg)
Construction Carbon steel blasted and painted
Electrical Requirements 230/460 Volt, 3 phase, 60 Hertz
Air Requirements 90 PSI, 0.5 cfm
Enclosures NEMA12
SPECIFICATIONS
www.magnumsystems.com
Toll Free 888.882.9567 Fax 620.421.5531
Corporate 2205 Jothi Avenue, Parsons, Kansas 67357
©2017 Magnum Systems, Inc. All rights reserved. Catalog number MS.1038.0917
Diagram dimensions are for reference only*
10.5 in(266 mm)
4.0
in(1
01 m
m)
4.0 in(101 mm)
13.0 in(330 mm)Ø 0.406 in (10 mm)
DIA. HOLES(12X)
10.75 in(273 m
m)
13.25 in(336 m
m)
26.313 in(668 mm)
13.938 in(354 mm)
65.5
in(1
,663
mm
)
ENC
LOSU
RE16
in x
14
in x
8 in
(406
mm
x 3
55m
m x
203
mm
)
55.875 in(1,419 mm)
28.938 in(735 mm)
26.688 in(677 mm)
75.25 in(1,911 m
m)
41.813 in(1,062 m
m)
43.563 in(1,106 mm)
25.375 in(644 mm)
23.875 in(606 mm)
20.7
5 in
(527
mm
)19
.5 in
(495
mm
)2.
25 in
(57
mm
)1
in(2
5 m
m)
CONTROLENCLOSURE
20.0 in x 16.0 in x 8.0 in(508 mm x 406 mm x 208 mm)
23.7
5 in
(603
mm
)
18.0
63 in
(458
mm
)
7.0
in(1
77 m
m)
ENC
LOSU
RE16 in x 14 in x 8 in
(406 mm
x 355mm
x 203 mm
)
Ø5.0 in SPOUT(127 mm)
BAG LENGTH19.0 in
(482 mm)
BAG LENGTH24.0 in
(609 mm)
Ø6.0 in SPOUT(152 mm)
IMPELLER PACKER
INFLATABLE BAG SPOUT• Dust Control • Positive seal on bag
