Iad configuration(ip) 20
-
Upload
tushar-kumar -
Category
Devices & Hardware
-
view
222 -
download
1
description
Transcript of Iad configuration(ip) 20
CN D&T Group
IAD Configuration (IP)
V1.1
2
Objects
After this course, you will know how to
configure the IP addresses for IAD
device
3
Set up the PC address
Step 1:
At first we need to change IAD IP address to our network IP using one PC.
So now connect PC and IAD.
Change PC IP address to IAD’s network IP address .So that we can put PC and IAD in same network.
Example:
IAD IP address - 168.1.1.2 /30
PC IP address - 168.1.1.1 /30
4
Set up the PC address
5
To enter IAD
Step 2:
Ping IAD IP address to check whether connection between PC and IAD has been established or not.
Then give telnet command to enter IAD IP address.
To enter in to IAD IP address we should give login ID and password.
6
To enter IAD
Here we are entering into IAD using telnet command.
7
To enter IAD
We should give login and password to enter into IAD.
Login/Password: root/root
8
Assigning server IP
Step 3:
After entering in to IAD IP address …….
Check IAD IP configuration using ifconfig command.
Assign server IP for IAD using server command.
9
Assigning server IP
Here we are assigning the server for our IAD using server command
10
Changing IAD’S IP address
Step 4:
After assigning server IP , change IAD’s IP address to Chennai VSNL’s IP network using ifconfig command .
After this step IAD IP address changes from 168.1.1.2 / 30 to 10.64.2.22 / 30.
Then save our works using save command .
Also give reboot command to save the changes in IAD’s IP address.
11
Changing IAD’S IP address
12
Changing IAD’S IP address
13
Changing IAD’S IP address
14
Checking IAD ’s new IP
Step 5:
Now we finished IAD IP configuration . We are going to ping IAD’s gateway from IAD. For that we assigned PC as IAD’s gateway.
IAD IP address - 10.64.2.22 / 30
IAD gateway ( PC) - 10.64.2.21 / 30
15
Checking IAD ’s new IP
Then enter in to IAD using telnet command then check the IP address, gateway , server all those things using ifconfig command.
16
Checking IAD ’s new IP
Ping IAD from PC ( IAD’s gateway).
17
Checking IAD ’s new IP
Here we are entering into IAD
18
Checking IAD ’s new IP
Now we are going to check our IAD IP address using ifconfig command.
19
Checking IAD ’s new IP
At last we configured our IAD IP address. So now…………
IAD IP address : 10.64.2.22 /30
Server IP of IAD: 10.64.2.12
Now, we have completed the IP configuration for IAD device.
univ.zte.com.cn