““HYDRODYNAMICS FOR PUBLIC UTILITY AND HYDRODYNAMICS FOR PUBLIC UTILITY AND ENVIRONMENTENVIRONMENT PROTECTION” PROTECTION”

OUR OFFICES:OUR OFFICES:Registered Headquarters:

Via V. Donati n.14 10121 Torino

Operative Headquarters:

Via delle Cartiere 4010072 Caselle Torinese (TO)

Tel. 011/9961642 fax 0119915285Mobile 346/7947721

VAT Number 10070530018

We offer solutions for every kind of cleaning

operation, such as: encrustations;

Deposits on internal or external surfaces;

Surfaces damaged by graffiti or chewing- gums

• Innovative Technical Cleaning

I) HYDRODYNAMIC CLEANING using pressures up to 2500 bar with cold water and 500 bar with hot water.

Flow ranges from 2 to 130 litres/min Hydrodinamics cleaning of welding Hydrodinamics cleaning of welding

machinery cooling circuits.machinery cooling circuits.

II) CRYOGENIC CLEANING : It employs a sandblasting system that uses dry- ice pellets (carbon dioxide) instead of sand or other abrasive elements.

III) ELECTRONIC CLEANING : for a perfect cleaning of electric boards.

WE OFFER::

Thanks to our experience in this particular field we developed our own machinery that allows us to obtain an optimal us to obtain an optimal result using a minimum amount using a minimum amount of water, that is a fundamental and scarce resource. Our method does not generate the by-products typical of cleaning operations done with different systems and this means we fully respect environmental regulations. environmental regulations.

We can also guarantee that our personnel will cause mimum annoyance while carrying out technical cleaning in public areas, thanks to our exclusive technology that does not simply 'throw water' but cleans effectively the surfaces without damaging them.

RESPECT FOR THE ENVIRONMENT IS OUR STARTING POINTRESPECT FOR THE ENVIRONMENT IS OUR STARTING POINT

Our technology uses EXCLUSIVELY the action of water, combining three elements:

1. Pressure

2. Flow

3. Temperature

I) Hydrodynamic Cleaning up to 2500 bar

This system has the big advantage of NOT USING any chemical product or

abrasive element.

. . . . HYDRODYNAMIC CLEANING

The use of high pressure pumps is much appreciated in urban environments because it is not invasive and does not damage the surface on which it is used. This technique is suited for surfaces subject to frequent circulation because the low amount of water used does not interfere with it. This cleaning system aims to solve the problems affecting almost every urbanized area: Chewing-gums on the sidewalks:Our environment friendly system will remove completely the spent chewing-gums from

every type of surface using just high-pressure water without any chemical product. Besides removing old chewing-gums, the treatment will also clean thoroughly the

whole surface.

. . . . HYDRODYNAMIC CLEANING

Graffiti and/or writings on wallsHigh-pressure water cleaning can be used also to removegraffiti and other writings or marks that damage walls, monuments, houses and public buildings.

before after before after

Thanks to constant research and to our advanced technology we can carry out every kind of cleaning

operation where there is the need to remove superficial encrustation

or accidental polymerization in tanks, industrial chimneys,

aeration system and industrial machinery.

(pressure usually ranges from 200 to 1000 bar for cleaning

operations on 'soft' materials but it can reach 2500 bar on very hard

surfaces)

. . . . HYDRODYNAMIC CLEANING

We use last-generation nozzles that allow our personnel to clean narrow or dangerous spaces without having to enter them, as in the case of incrustations in chimneys.

The tools we use for that kind of operation are: o High-pressure pump (1000 bar; 140 l/min) o Vertical nozzle, rotating on two axis and inserted into the

well by a windlass.

. . . . HYDRODYNAMIC CLEANING

Our hydrodynamic system is perfectly suited for cleaning welding systems cooling circuits, circuits, in which the increase of water temperaturein which the increase of water temperature causes the precipitation of calcium and magnesium salts, thus leading to the formation of encrustations on the metal surfaces of the cooling circuit pipes of the welding machinery. Those incrustations can cause a decrease of the water flow and and a consequent increase in heating.

» In order to melt these encrustations it is necessary to use de-encrusting pumps to let suitable cleansing acids flow through the pipes.

WELDING MACHINERY

. . . . HYDRODYNAMIC CLEANING

“ Nuove Tecnologie Applicate” has vertically-swinging anti-encrustation pumps with tanks, in order to work effectively on every type of plant and machinery.NTA anti-encrustation pumps are made of high-quality acid-resistant materials and are tested thoroughly. A special flux-invertes (see picture) allows the system to attack encrustations from both sides, while a self-regulating device controls flow and pressure adjusting them according to the consistency of the deposit and allows the machine to work effectively also on almost obstructed pipes. The new tank makes operations easier thanks to its ergonomical shape and to a user-friendly system that blocks the rubber hoses.

The tests carried out on the welding machinery in the Mirafiori bodywork plant demonstrated the efficiency of our system in re-establishing water circulation in industrial welding clamps. In some cases, a one-hour intervention increased the flow from 20% to 90%.

. . . . HYDRODYNAMIC CLEANING of welding systems

OUR EQUIPMENT AND HYDRODYNAMICS

Our experience in technical cleaning allows us to perform accurate interventions using specific equipment:

Different models of high-pressure cleaning machines that can be chosen according to the material that must be cleaned or to the operational space.

All our machines are designed as autonomous and independent units.

We have special vehicles to carry our machines on the spot.

SOME APPLICATION FIELDS OF HYDRODYNAMICS

Hydrodynamic cleaning does not use any chemical, but just water and this makes it suitable

for a wide range of applications in different fields, such as:

CHEMICAL INDUSTRYCHEMICAL INDUSTRY:

- preparation of metallic surfaces- paint removal- cleaning of tools and machinery- removal of polymerization by-products- removal of encrustations in pipes, grates, etc...

FOODFOOD INDUSTRY:

- Storage-tanks washing- Cleaning of machinery and conveyor belts

...HYDRODYNAMICS APPLICATION FIELDS

AND MANY OTHERS…AND MANY OTHERS…

CONSTRUCTION: CONSTRUCTION: - Hydrodemolition- Concrete cutting and scarification- Damaged coverings removal- Preparation of the internal surface of tanks- Cleaning of frontages and pavings

ENVIRONMENTAL: ENVIRONMENTAL: - Tanks' cleaning- Cleaning of filter-presses- Water-jet tanks' cutting- Decontamination and cleaning of industrial machinery

and plants

INDUSTRIAL: INDUSTRIAL: - Cleaning of paint booths and paint ovens - Cleaning of machinery and plants

This procedure has peculiar characteristics, such as:

The system works using compressed air and dry-ice (solid carbon dioxide) pellets.

It uses a mechanical process that does not produce chemical reactions (thus being environment-friendly).

It is a completely non-abrasive cleaning system.

Does not imply any risk for the environment.

II) CRYOGENIC cleaning

THE MAIN APPLICATION FIELDS ARE:

- Rubber industry

It provides fast cleaning (10-15 min) and does not leave any by-product or waste

that need to be disposed of.

- Graphic industry

Cleaning of lithographic cylindres without their removal from the

printing machines.

. . . . CRYOGENIC CLEANING

- Automotive industry

Improvement of the efficiency of productive systems.

Environmental protection through reduction of smoke, dust and chemicals in working areas.

Improvement of the employees' working conditions.

. . . . CRYOGENIC CLEANING

cleaning operations carried out by NTA, either cryogenic or made by using high-pressure water

jets, have a significantly lower impact on the environment in comparison to the mechanical

systems previously used; moreover, our interventions are

time-saving, because their biggest part is made 'on the

spot'.

In conclusion we can state that :

ELECTRO-CLEANERcreated for cleaning operations in presence of tension up to 1000V

It must be applied using the specifichigh-pressure pump

The electro-cleaner is composed of acetylenic alcohols and isoparaffins and has been created to clean electryc system (in tension) distribution boards, electric control panels, electric and electronic systems, electronic boards, engines, power transformers, screens, video-recorders, telephones and many other industrial appliances.

Properties: Very high dielectric rigidity: 229,3kV/cm, it incorporates dust and greasy materials.

III) ELECTRONIC cleaning

before after

ENVIRONMENTAL SERVICES

A) Collection, transport, treatment and disposal of dangerous and non-dangerous special waste.

B) Disposal of liquid civil and

industrial waste.

C) Emptying and cleaning of tanks and septic tanks

D) Unblocking of pipelines and sewage systems

WE CAN ALSO PROVIDE:

CATEGORY 4:Collection and transport of special non-dangerous waste, produced by third-parties.

CLASS E: Overall yearly-processed amount superior to 3000 tons and inferior to 6000 tons.

Categories:

CATEGORY 5: Collection and transport of dangerous waste.

CLASS F: Overall yearly-processed amount inferior to 3000 tons

CATEGOY n. 1: Collection and transport of special non-dangerous waste, produced by third-parties.

CLASS E: overall population of the area assisted by the service inferior to 20.000 and superior or equal to 5.000 inhabitants.

Registration Number: TO15194 del 05/04/2011TO15194 del 05/04/2011

The company is regularly registered in the National Register of waste transport and disposal companies, so we can transport special waste materials, both dangerous and non-dangerous, on the entire national territory.NTA puts particular care on the safety aspects related to this sector of its activities, therefore, all the equipment and the vehicles undergo strict controls and periodical maintenance . Our personnel carries out a preventive analysis before each mission, so we will be able to recommend the best combination of equipment and service in order to provide the customer with top-quality reliability, safety, respect of environmental regulations and, last but not least, an affordable price.

A) COLLECTION, TRANSPORT, HANDLING AND DISPOSAL OF DANGEROUS AND NON-DANGEROUS WASTE.

NTA can manage every phase of waste disposal, thanks also to its efficient vehicle fleet, that complies with all the current laws and regulations, allowing the company to optimize its performance and to provide a service that, nowadays, is able to solveone of the most burdensome problems afflicting both companies and communities.

. . . . Collection, transport, treatment and disposal of dangerous and non-dangerous special waste

B) DISPOSAL OF CIVIL AND INDUSTRIAL LIQUID WASTEOur canal jet range can satisfy every operational need, thanks to its wide range of

dimensions, technical solutions, equipment and machinery. Our vehicles are tested and respect the ADR (“Accord euroopÈen relatif au transport

international des merchandises Dangereuses par Route”) regulations concerning the handling and transporto of dangerous waste.

Our service is made complete by the use of our wide range of tools and accessories, such as manhole covers and grate removers, shaft localizers, probes of different types and

dimensions, etc...

The knowledge we acquired, together with our technical know-how and our time-proven procedures, developed by our technical personnel over the years, and completed by the use of our technological equipment, enables us to perform cleaning operations on tanks and artificial basins, wheter buried or not, and to issue all the valid certifications that allow the owner to dismiss the structures or to re-use them according to the current laws and regulations (gas free and resistance-tested).The operations are carried out either using conventional methods, with our specifically equipped personnel entering the structure, or by using technologically advanced equipment that allows the operator to work from a distance providing, however, reliable and safe results. We can give a further guarantee of the quality of our intervention by providing the client with evidence and data collected with our professional video-inspection systems, that can check and certify the operations carried out by our personnel.

C) EMPTYING AND CLEANING OF TANKS AND ARTIFICIAL BASINS

NTApplicate can also privide:

LOGISTICS & PORTERAGE

We can provide a goods handling and transport service by employing machinery, advanced logistics techniques and other equipment.

We carry out all activities paying attention to organization and quality in order to provide the customer with flexible and efficient solutions.

WE WOULD LIKE TO INVITE YOU TO VISIT OUR SHOWROOM

OUR WEBSITE

www.ntapplicate.itIn our website you can find information, pictures and videos about our activities and services and also about the use of new technology in the field of industrial

cleaning.

We are available to provide further information, please contact us at the following email addresses:

lamesta@ntapplicate.it - ronco@ntapplicate.it

We operate on the whole national territory and abroad.