hydrodynamics structure

JEFRI MG Address: Perumahan Bida Ayu

Bukit Ayu Lestari Blok Z1.No.17

Tanjung Piayu Batam Island

Mobile Phone : (62) 81266008111 / (62) 813 72 335 456

E-mail : [email protected]

Passport No : R 624161

Date of Expire : March 13th

, 2013

------------------------------------------------------------------------------------------------------ ----------------------------------------------------

SUMMARY OF EXPERIENCES

I have over 10 years continuous experience in the Protective Coating Industry, new construction and maintenance of Oil and

Gas Platforms, refineries and Petrochemical plants. I did inspecting various types of coatings including Thermal Spray Zinc /

Aluminums (TSA). Having worked my way from a surface preparator utilizing numerous methods of surface preparation and

coating application using both conventional and airless spray application in to supervision and ultimately senior / Client

Inspector. Most of my career has been in Inspecting and Supervision capacity. I am experience in a wide range of modern paint

system, such as Tank linings and fire protection coatings (Fire Proving coating system). I am capable of ensuring that call

clients specification, QC Procedures, and International standards are complied with as well as maintaining a high standard of

safety. I have always considered myself to have a good relationship with the client and my managers. I am hard working and I

follow company safety policies and procedures and I also lead a good example to those people working under me. Safety is

always my first thought. I am very ambitious and embrace new challenges.

PERSONAL DATA

Date of Birth : Dec 6th

, 1976

Nationality : Indonesia

Martial Status : Married

Sex : Male

EDUCATIONAL BACKGROUND & QUALIFICATION

Degree : Certified

Technical High School : Certified

Exellent in English Communication both oral and written

Able to operate computer and Internet as well

SCOPES OF SPECIALIST TRAINING

Corrosion and Corrosion Control

Coating Types and their protection mechanism

Surface Preparation Prior to Painting Application

Profile Measurement

Coating Material Mixing

Application of coating materials

Recoating Intervals

Inspection and Quality Control

Coating Degradation, Paint Defects and remedies

Environmental Test Instrument

WFT & DFT Gauging

Coating Inspector job and responsibilities

Safety in Blasting Painting Operation

Coating Compatibility

Heat Resistant Coating

Various Coating & Paint Systems

Surface Temperature Gauging

Relative Humidity, Dew Point, Wet Bulb

Paint Consumption Calculation

Coating Storage, MSDS, PDS, Flash Point, Induction

period

Safety in Confined Space Operation

Identification for Harmful and hazardous Materials

Toxic Material, PPE

Inspection Test Plan (ITP) & Quality Plan

Paint Application Procedure (PAP)

Recording and Reporting

Safety Signs Identification

General Quality Assurance & Quality Control

Surface Tolerant Coating

Anti Fouling Coating

Tank Coatings

Splash Zone Coating

Paint Generic Types

Water Resistant Coating

Chemical Resistant Coating

Fire Proofing Coating

Surface Preparation to SA 2, 2,5 & SA 3 Standards

Hand and Power Tool Cleaning to ST 2 & ST 3

Coating Adhesion Test (Pull Off Tester)

Chlorite, Sulphate, Nitrate Contamination Tests

Surface Profile Depth Gauging

Pin hole & holiday detection
mailto:[email protected]

COURSE & EXAMS FOR SPECIALIST

CERTIFICATION

COATING INSPECTOR LEVEL I

National Training & Certification Program

INDOCOR (Indonesian Corrosion Association)

A Certification Program Conforms

International Painting Qualification

Ref. ASTM D 3276

Cert ID No : 21 6103 0810

For Verification and other information, contact:

INDONESIAN CORROSION ASSOCIATION

Gedung Program Study Teknik Material ITB

Labtek X Lantai 1 Jln Ganesha No. 10 Bandung 40132

Phone / Fax: + 62-22-2512452, / + 62-22-7085544

Email: [email protected] / http://www.indocor.org

Reference: Dr.Ir. Bambang Widyanto, President of

Indonesian

Corrosion Association

National Cert.DEPNAKER-RI No. 089606

COATING INSPECTOR LEVEL II

National Training & Certification Program

AKN (Ahli Korosi Nasional)Professional Certification Body

for National Corrosion Expert

Corresponding to the

International Painting Qualification

Refers to: ASTM D 3276 and NS 476

Cert ID No : 12 00000 2010


LSP - AKN

Jln Badak 1, Blok B No. 45 Bekasi 17510

Phone / Fax: + 62-21-825 1881, / + 62-21- 825 1484

Reference: Ir. Lindung Silalahi, Corrosion Engineer

SK. DEPNAKER RI NO: 00 / 041 / 070. 364 /IX/ 1997 ID#

089609

Certificate no: NO: 010/IC.I/I-61/III/2008, By Mr. Ir.

Lindung Silalahi, NACE ID#3841

Attended BGAS CSWIP PAINTING INSPECTOR Training Level 2 and Level 3

Conducted in Batam Island on September 5th

September 12th

,2011

PRACTICAL EXAM RESULT:

Exam was Conducted on Sept 12, 2011

BGAS CSWIP PAINTING INSPECTOR GRADE 3: PASS

BGAS CSWIP PAINTING INSPECTOR GRADE 2: PASS

BG No: 598783

CSWIP 3.0 VISUAL WELDING INSPECTOR

international certification program

CSWIP Cert ID No : 39836

In House Training

BGAS CSWIP Painting Inspector Grade 3

Well Trained by: Refference,

Mr. Rasiman Madsirad

Senior Coating Inspector

CSWIP Cert ID No : 39836

Certificate No: WIS1 / BTM / 09 / 05 / 375


Issued by:

TWI Certification Ltd, Granta Park, Great Abington,

Cambridge CB21 6 AL UK.

Telp: + 44 (0) 1223 899000; Fax: +44 (0) 1223 894219

E-mail: [email protected]

Reference: Mohamad Darus Bin Taib, General Manager -

TWISEA

Cert ID No: 22438 BGID: 560888

Telephone: (62)-778-3553403 / (62)-778-453298

Mobile: (62)-8127011304

E-mail: Rasiman [email protected]

In House Training

FROSIO, Coating Inspector Grade 3

Well Trained by: Refference,

Mr. Peter Tan

Senior Coating Inspector

Telephone: + (65) 96235593

Mobile: (62) 813 6443 8386

E-mail: [email protected]
mailto:[email protected]://www.indocor.org/mailto:[email protected]:Rasiman%[email protected]

ON JOB TRAINING ATTENDED

On Job Training of New Building, Dry-docking, and Project Procedures

On Job Training of Tank Coating Procedures

On Job Training of HSE: Hazard Identification and Risk Assessment

COATING / PAINTING, INSULATION, FIRE PROOFING ON STRUCTURAL, PIPELINE AND SHIP

INSPECTION AS FOLLOWS:

Client/End Use : Norshore Atlantic. (Norway)

Designation : Coating Inspector for PSPC Standard Requirement

Fabricating in : PT. Batamec Ship yard Indonesia Batam

Project : Multipurpose Sub Sea Support & Construction Support MT 6022 XL.

Job Description : Specification, Verify, reviews and approved, Task daily reports, attend the

Project meeting, VSCC Meeting, Production meeting, safety meeting and reporting to PJM

Client/End Use : Hellespont Steamship Corporation

Designation : Senior Coating Inspector for Owner Representative

Fabricating in : PT. Drydocks Nanindah Indonesia Batam

Project : Platform Supply Vessels, T.192 and T. 193, Hellespont Deity & Dione

Job Description : Specification, Verify, reviews and approved, Task daily reports, attend the

Progress meeting, safety meeting, recording and reporting to Project Manager

Punch listing and Documentation

Client/End Use : International Paint Singapore (Akzo Noble)

Designation : Coating Advisor (Painting Representative)

Fabricating in : PT. Myclin Offshore

Project : H-108 & H-109, two units Accommodation Barge (New Building), and Myclin

Endurance

Job Description : Carry out surface preparation inspection, and paint specification as well

Establish contact with all parties concerned, discuss and confirm final paint specification

and submit periodic progress report.

To carry out blasting / surface profile / final cleaning inspection with the owner.

Monitoring environmental condition before and during paint application

Ensure that the paint mixing and thinning if required are properly carried out;

Measure wet film thickness and dry film thickness when appropriate

Ensure maximum and minimum over coating time between coats in accordance to paint

specification

Carry out final dry film thickness inspection and acceptance with owner rep on

subsequence coats

Provide shipyard, contractor and owner rep about technical information

Compile a data plan new building report and photos captions after completion of project



Fabricating in : PT. ASL Batam Island

Project : H-871, H-874 & H-875 Supply Vessels (New Building) Tide Water Company.

: BETA & BELUGA EMOTION (Repair Project)








Ensure maximum and minimum over coating time between coats in accordance to the paint

spec


subsequence coats





Fabricating in : PT. PAN UNITED

Project : H-182, 183, 184, 185, Supply Vessels (New Building) Owner: Helline








Ensure maximum and minimum over coating time between coats in accordance to the spec


subsequence coats.





Fabricating in : PT. BATAMEC

Project : H-7047, 7048, 7049, & H-7050, Supply Vessels, MOSVOLD PROJECT (New

Building)

Project 5150 HP Anchor Handling, Towing and supply vessels

Classification: ABS Classification (+A1, Towing Vessel, AH, Fire Fighting

Vessel Class 1, Offshore Support Vessel, +AMS, +ACCU, +DPS) H-7020 (JASCON 39)

H-7021 (JASCON 40)


Vessel Class 1, Offshore Support Vessel, +AMS, +ACCU, +DPS)

Owner: Jascon

H-7022 (PETRA ADVENTURER)

H-7023 (PETRA TRAVELLER)


Vessel Class 1, Offshore Support Vessel, +AMS, +ACCU, +DPS

Owner: Thome Offshore

H-7025 (ARK TORI)

H-7026 (ARK CATH)

H-7031 (ARK LIZZIE)

H-7032 (ARK CRIS)


Vessel Class 1, Offshore Support Vessel, +AMS, +ACCU, +DPS)

Owner: RK Offshore








Ensure maximum and minimum over coating time between coats in accordance to

pain specification


subsequence coats


Compile a data plan new building report and photos captions after completion of

project



Fabricating in : PT.DRYDOCK NANINDAH

Project : H-173, H-174, H-175, & H-176, Supply Vessels (New Building),

Owner: TIDE WATER

H-181 & H-182, Supply Vessels (New Building)

Owner: SEACORE








Ensure maximum and minimum over coating time between coats in accordance to the spec

required


subsequence coats

General Job Function: Assure that proper coating has been applied and is acceptable for intended field facility. Verify that required coating inspection

methods are performed properly, including DFT, Holiday testing, etc. Monitoring mixing & application of coatings by

contractor, maintain daily log or diary of activities regularly everyday.

EMPLOYMENT HISTORY

Reference contacts:

Rasiman Madsirad, BGAS Grade 3, Senior Painting Inspector, Nor shore Atlantic Batam. Email: Rasiman [email protected]

Jason Ross (Tlccor), NACE III, QC Cryogenic Insulation Inspector at AGC Industries, Woodside Pluto LNG Project, Western Australia

Email: [email protected]

Millan, FROSIO Coating Inspector Grade III, Senior Coating Inspector for Norshore Atlantic Project, Multi Purpose drilling ship.

Email: [email protected]

Petros Giannopapas, Project Manager at Hellespont Dione, Hellespont Steamship Corp,

Batamec shipyard June 2010 Jan 2012

Hellespont corporation (Greece company) December 2008 march 2010

International paint Singapore (Akzo Nobel) February 2005 November 2008

Nexus March 2003 Dec 2004

Berger Batam June 2002 Feb 2003
mailto:Rasiman%[email protected]:[email protected]

HOME CATEGORIES CERTIFICATE VERIFICATION OTHER CERTIFICATION NEWS & EVENTS CONTACT US

Welding Inspection Plant Inspection Offshore Inspection Non-destructive Testing Plastics Welders Welding Instructors Welding Supervisors Welders Cathodic Protection Personnel Review of Welding Procedures Certification Scheme for Welder

Training Organisations

National Welder Training Standard Welding Fabricator Certification Scheme

CSWIP Certificate Verification Thank you for using our online verification system. Details on this valid certificate are displayed

below.

Details Certificate Number 39836

Expiry date 19-MAY-2014

Holders name Jefri Manahan Gultom

Name of Certificate Visual Welding Inspector

Level 1

Issue date 17-JUN-2009

SITE MAP

Copyright CSWIP 2009
http://www.cswip.com/home/index.jspjavascript:void(0);http://www.cswip.com/verification/index.jspjavascript:void(0);javascript:void(0);http://www.cswip.com/news/index.jsphttp://www.cswip.com/contact/index.jsphttp://www.cswip.com/categories/awelding_inspection.jsphttp://www.cswip.com/categories/plant_inspection.jsphttp://www.cswip.com/categories/offshore_inspection.jsphttp://www.cswip.com/categories/non_destructive_testing.jsphttp://www.cswip.com/categories/plastics.jsphttp://www.cswip.com/categories/bwelding_instructors.jsphttp://www.cswip.com/categories/cwelding_supervisors.jsphttp://www.cswip.com/categories/dwelders.jsphttp://www.cswip.com/categories/cathodic_inspection.jsphttp://www.cswip.com/categories/welding_procedures.jsphttp://www.cswip.com/wto-2.htmlhttp://www.cswip.com/wto-2.htmlhttp://www.cswip.com/nwtst.htmlhttp://www.iso3834.org/home/index.jsphttp://www.cswip.com/site_map/index.jsp

hydrodynamics structure

Documents

Transcript of hydrodynamics structure