HYDRAULIC EXCAVATOR CX800 - · PDF fileSix cylinder Tier 3A compliant engine utilises...
Transcript of HYDRAULIC EXCAVATOR CX800 - · PDF fileSix cylinder Tier 3A compliant engine utilises...
CX800
P R O F E S S I O N A L P A R T N E R
HYDRAULIC EXCAVATOR
Engine Horsepower 369 kW - 495 hpOperating weight (max) 82 tBucket range 2.4 m3 to 5.3 m3
2
ECONOMY ANDPRODUCTIVITYSix cylinder Tier 3A compliant engine utilises electronic control to
optimise performance while minimising fuel consumption, lowering
running costs and boosting operating revenues.
Power to perform, environmental responsibility.
LOWERINGOWNERSHIPCOSTSExtended service intervals, ultra-clean
hydraulic filters and easy service
access cut downtime.
Reduced maintenance, increasedproductivity.
RAPIDPERFORMERTwin main pumps offer the hydraulic power to get the
job done. Maximum bucket force of 470kN and arm
force of 347kN with auto power up provide the
breakout for the toughest site conditions.
Designed to perform, whatever the task.
OPERATORRESPONSEFour operating modes match the engine and hydraulic
performance to the application. Revolutionary auto
setting uses Intelligent Computer Command Control
System (ICCCS) to instantly change between modes,
offering rapid response. Auto power boost increases
power for maximum breakout.
Instant power, total control.
WORKING ENVIRONMENTCase operators benefit from superb cab comfort. Climate control, high levels of visibility and isolation
mountings make the CX800 the best office on site.
Comfortable operator, productive operator.
3
RAPIDMOVEMENTTwo speed tracking provides speed and
gradeability. Oiled track roller bearings
reduce heat build up, increasing track life.
Variable track width provides stability for
heavy digging.
Strong foundations, sturdy build.
POWER TOPERFORMStructural integrity of work equipment
offers high breakout forces with a range
of boom and dipper arm configurations.
Designed to work, built to last.
REGULARMAINTENANCEWide opening service panels, with walkways to
both sides of the machine, allow excellent levels of
service access to engine and hydraulic components.
Fan reverse clears debris from the cooling pack
on engine start-up. On-board diagnostics monitor
machine systems.
Serviceability, reliability, durability.
EXTENDED HOURS1000 hour greasing on boom and arm pins (except bucket). EMS chrome plated pins and brass
bushes offer durable solution.
Minimum downtime, maximum productivity.
BUILT TO LASTIncreased strength from top to bottom. Slew bearing
hub extends through top plate for added rigidity.
Track guards and strut-type chain links reduce
twisting and point loading.
Heavy duty design, heavy duty construction.
4
The CX800 enables the operator to have a choice on how the
machine is operated. Simply choose the work mode that matches
the machine output to the job application.
Four operating modes are available.
H Mode (Heavy)For heavy excavation or whenever you need extra power.
S Mode (Standard)For standard digging and loading operations reducing fuel
consumption.
L Mode (Light)For lifting and other operations that need fingertip accuracy.
Auto-ModeThe most revolutionary approach to maximizing power & fuel
efficiency available today. Just select the Auto-Mode with the
switch panel. Using actual working pressure readings, ICCCS
instantly changes modes assuring the best combination of speed
and power while you can stay focused on the work at hand.
The Case CX800 is equipped with a proven Isuzu AH-6WG1X
diesel engine, providing 495 hp (369 kW) of power at an unstressed
1800 rpm. With high pressure common rail fuel injection, this
electronically-controlled engine meets the requirements of the
EU directive 97/68/EC Tier 3A on engine emissions.
The Case Intelligent Computer Command Control System (ICCCS),
working with electronic engine control, optimises the fuel injection
to meet the load on the engine and hydraulic cylinders. This
results in a high level of responsiveness for the operator and
more efficient use of the engine, reducing fuel consumption and
engine emissions.
The engine incorporates an automatic warm-up system, which
increases engine speed gradually as the correct operating
temperatures are reached, preventing premature wear of engine
components.
ENGINE
Case excavators offer the power and speed to perform, whatever
the application. Using an Intelligent Computer Command Control
System (ICCCS), the CX800 provides the optimum balance of
speed, power and fuel efficiency to meet the operator’s needs.
Boom priority permits faster cycle times in loading operations
as the hydraulic oil is prioritised to the main boom circuit during
the raise function. The energy created by oil returning from the
boom and the dipper arm is regenerated to increase the
excavating speed.
In addition there is an auto power boost function which automatically
increases the system pressure by 8-10 per cent to power through
heavy ground, or to help with heavy lifting duties.
The CX800 features an ultra-clean 1 micron hydraulic filter,
which provides an exceptional level of filtration, even removing
water from the oil. This results in extended hydraulic oil life, with
change intervals now set at 5000 hours, reducing downtime
and cutting operating costs.
HYDRAULIC SYSTEM
OPERATING MODES
5
OPERATOR’S CABAs befits a range-topping machine, the CX800’s cab offers high
levels of comfort, low noise and a climate-controlled working
environment. The entire cab is mounted on six shock absorbing
rubber and fluid mounts, reducing vibration and noise in the cab
for the operator.
A fully adjustable suspension seat is standard equipment, offering
height, reach and rake options to ensure that all sizes of operator
can find their ideal working position. Automatic climate control
maintains the desired temperature in the cab whatever the
weather outside.
The cab is a full 1 metre wide, with plenty of room for the operator
to store coats and bags out of the working area. Large windscreens
and side glazing, along with low bodywork to the rear of the machine,
provide excellent all round visibility from the cab. Rear view safety
mirrors are also included in the standard specification.
6
As the biggest machine in the Case range, the CX800 continues
a long tradition of durable, highly productive mining and heavy
earthmoving excavators. A modified X-style carbody is welded
internally for added strength, and the turntable bearing hub
extends down through the top plate of the carbody for additional
structural integrity.
The machine has two speed travel motors, with a top speed of
4.2 km/h, making it easy to reposition on site when necessary.
The track motors will downshift automatically when climbing,
and compact high torque final drives ensure traction on the
steepest grades.
There are large, wide opening doors to both sides of the machine,
making it easy for technicians to access the engine and hydraulic
componentry. The CX800 is equipped with a hydraulically-driven
cooling fan, which can be reversed on start-up to blow dust and
debris away from the excavator’s cooling pack.
The machine benefits from a 900 litre fuel tank, to maximise
working time. An auto-stop electric fuel pump is fitted as standard
to the machine, to reduce refuelling times and make life easier
for the operator.
All boom pins (except the bucket pins) are extended maintenance
system (EMS) chrome plated for increased hardness, with
lubricated brass bushings fitted through the boom and dipper.
Dust seals are double structured to prevent the ingress of dirt
and dust on site.
This combination makes it possible to extend lubrication intervals
on the boom pins to six months/1000 hours of operation, cutting
downtime and ensuring that the machine keeps working longer.
UNDERCARRIAGE/TRANSMISSION
EMS chrome plated pins with brass bushing
IMPROVED PIN AND BUSHING LIFE
MAINTENANCE/ACCESSIBILITY
7
ATTACHMENTS/BUCKETSCX800 customers can choose from a variety of main booms and dipper arms to suit different applications, all of which areconstructed of heavy duty steel box section with internal baffles to increase torsional rigidity. Deep groove welding ensuresthat the booms and arms can withstand the stress of high breakout forces, heavy lifting and attachments such as hydraulicbreakers, compactors, demolition shears and crushers.With a choice of two main booms and four dipper sticks, along with a range of buckets from 2.4 m3 - 5.3 m3, there is aconfiguration to meet the requirements of every customer’s job site.
8
9
l
mm
kg
2400 2780 3300 3700 4100 5000
1300 1450 1650 1800 1900 2300
2960 3110 3400 3540 3640 4120
l
mm
kg
2550 2960 3510 3900 4210 5330
1300 1450 1650 1800 1900 2300
3570 3740 - 4290 4410 5020
l
mm
kg
2550 2960 3510 3900 4210 5330
1300 1450 1650 1800 1900 2300
3570 3740 - 4290 4410 5020
l
mm
kg
4100
1800
4500
10
SPECIFICATIONSENGINE
Latest generation engine, meeting European requirements for
“low exhaust emissions” Tier 3A, in accordance with directive
97/68/EC.
Make_________________________________________ISUZU
Type _____________________________________AH-6WG1X
Common rail, turbo, intercooler, fuel cooler ____________yes
Injection ________________________electronically controlled
No. of cylinders_____________________________________6
Bore - Stroke___________________________147 x 154 mm
Cubic capacity ____________________________15 700 cm3
Horsepower EEC 80/1269 _____________369 kW/495 hp
Engine speed_______________________________1800 rpm
HYDRAULIC SYSTEM
Linked to the engine power management electronic system, a
second electronic system manages all the hydraulic parameters
so as to obtain the highest possible available hydraulic power,
under optimum condition of efficiency and economy.
The system consists of two axial piston, variable flow pumps.
Max output _____________________________2 x 500 l/min
Max safety valve pressure
Attachment/Auto Power Boost_____________314/343 bar
Upperstructure swing _________________________279 bar
Travel_______________________________________343 bar
Oil filtration (Ultra Clean)_______________________1 micron
CONTROL VALVES
4 sections for: RH track travel, boom, bucket, and dipper acceleration.
5 sections for: LH track travel, swing, dipper, auxiliary circuit
and boom acceleration.
SWING
Axial piston, fixed flow motor.
Max upperstructure swing speed ________________6.4 rpm
Swing torque _____________________________26 500 daN
TRAVEL
The travel circuit is equipped with two axial piston, variable
flow motors.
Planetary reduction gears, automatic multi-disc brake.
Max travel speed ______________________________4.3 kph
Low travel speed ______________________________2.9 kph
Speed change is controlled from the instrument panel.
Automatic downshift
Gradeability ________________________________70% (35°)
Tractive force ____________________________56 500 daN
ELECTRICAL SYSTEM
Circuit _________________________________________24 V
Batteries___________________________2 x 12 V - 140 A/h
Circuit equipped with water-proof connectors
Alternator ______________________________24 V - 50 A/h
UNDERCARRIAGE
Specifications (per track set):
Upper rollers ______________________________________3
Lower rollers ______________________________________9
Number of track pads ______________________________51
Type of shoes __________________________Double grouser
Standard track pad width ______________________750 mm
CIRCUIT AND COMPONENT CAPACITIES
Fuel tank_______________________________________900 l
Hydraulic reservoir ______________________________310 l
Hydraulic system ________________________________720 l
Travel reduction gear (per side) ____________________13.8 l
Swing reduction gear ____________________________13.5 l
Engine (including filter change) ______________________52 l
Engine coolant circuit_____________________________133 l
TRANSPORT
The variable track width facilitates transportation by reducing,
the width to 3.58 m (with 750 mm pads). The CX800 can be
equipped (optional) with an auto-demountable counterweight.
A system of 3 hydraulically controlled cylinders allows for quick
dismounting without the need for any special re-handling machine.
SAE capacity
Width
Weight
GENERAL PURPOSE
SAE capacity
Width
Weight
ROCK
BUCKETS
SAE capacity
Width
Weight
HEAVY DUTY WITH TOPLOCK
SAE capacity
Width
Weight
VERY HEAVY DUTY WITH TOPLOCK
B
E
J
K
L
M
A
G
C
D
F
I
H
650 mm 750 mm
11
GENERAL DIMENSIONSWITH 7.25 m MASS EXCAVATION BOOM - 2.98 m DIPPER
DIPPER LENGTH
Overall height (with attachment)
Height (cab / handrail)
Overall length (with attachment)
Overall length (w/o attachment)
Width of upperstructure (without / with cat walks)
Upperstructure ground clearance
Swing (rear end) radius
Track overall length
Centre/centre (idler to sprocket)
Track gauge (work)
(travel)
Track shoes width (std)
Track overall width (with steps) - Shoes 650 mm (work)
- Shoes 650 mm (travel)
- Shoes 750 mm (work)
- Shoes 750 mm (travel)
Ground clearance
A
B
C
D
E
F
G
H
I
J
K
L
M
m
m
m
m
m
m
m
m
m
m
m
mm
m
m
m
m
m
WEIGHT AND GROUND PRESSURE
2.98 m
5.05
3.56/3.88
13.23
7.46
3.47/4.25
1.59
4.28
6.36
5.07
3.45
2.83
650
4.36
3.74
4.46
3.84
0.89
Dipper 2.98 m
With operator, full fuel tank,
lubricant, coolant, bucket*
GROUNDWEIGHT PRESSURE
(kg) (bar)
80 400 1.10
*Bucket weight: 3400 kg
GROUNDWEIGHT PRESSURE
(kg) (bar)
81 100 -
12
9 8 7 5 4 3 2 1 0610111213m
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8m
G
F
C D
E
H
A
B
2,44 m
PERFORMANCE DATAWITH 7.25 m MASS EXCAVATION BOOM, 2.98 m DIPPER
m
m
m
m
m
m
m
m
daN
daN
daN
daN
Maximum digging reach
Maximum digging reach at ground level
Maximum digging depth
Digging depth - 2.44 m level bottom
Max dump height
Overall reach height
Minimum swing radius - attachment
Vertical straight wall dig depth
Digging force (w/o PowerBoost)
Breakout force (w/o PowerBoost)
Digging force (with PowerBoost)
Breakout force (with PowerBoost)
DIPPER LENGTH 2.98 m
A
B
C
D
E
F
G
H
12.31
12
7.03
6.90
7.89
11.75
5.40
4.25
31 700
43 000
34 700
47 000
LIFTING CAPACITY3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At max reach
REACH
With 7.25 m boom, 2.98 m dipper, 650 mm tracks and 3420 kg bucket
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m
-1.5 m
-3.0 m
-4.5 m
Front
360°
Values are expressed in kilos
m
11 976* 11976*
12 732* 12 732* 11 874* 11 874*
17 690* 17 690* 15 848* 14 948 12 202* 12 202*
32 866* 32 866* 23 907* 23 907* 19 383* 19 383* 16 701* 14 302 12 932* 11 502
37 917* 37 917* 27 009* 26 066 21 097* 18 328 17 618* 13 613 14 144* 10 796
29 282* 29 281* 29 037* 24 456 22 380* 17 335 18 309* 13 011 15 965* 10 574
33 885* 33 885* 29 571* 23 562 22 877* 16 675 18 485* 12 591 16 396* 10 841
26 331* 26 331* 37 767* 37 767* 28 597* 23 244 22 326* 16 376 17 786* 12 422 16 838* 11 742
37 512* 37 512* 33 497* 33 497* 26 005* 23 387 20 350* 16 449 17 151* 13 693
26 845* 26 845* 21 166* 21 166* 16 919* 16 919*
8.14
9.12
9.76
10.14
10.29
10.22
9.91
9.35
8.49
7.21
� Machine in «LIGHT» mode � Lift capacities are taken in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2 � Lift capacities shown in kg do not exceed 75% of the
tipping load or 87% of the hydraulic lift capacity � Capacities that are marked with an asterisk are hydraulic limited
13
B
E
J
K
L
M
A
G
C
D
F
I
H
650 mm 750 mm 900 mm
GENERAL DIMENSIONSWITH 8.40 m STANDARD BOOM
DIPPER LENGTH
Overall height (with attachment)
Height (cab / handrail)
Overall length (with attachment)
Overall length (w/o attachment)
Width of upperstructure (without / with cat walks)
Upperstructure ground clearance
Swing (rear end) radius
Track overall length
Centre/centre (idler to sprocket)
Track gauge (work)
(travel)
Track shoes width (std)
Track overall width (with steps) - Shoes 650 mm (work)
- Shoes 650 mm (travel)
- Shoes 750 mm (work)
- Shoes 750 mm (travel)
Ground clearance
A
B
C
D
E
F
G
H
I
J
K
L
M
m
m
m
m
m
m
m
m
m
m
m
mm
m
m
m
m
m
4.81
3.56/3.88
14.36
7.46
3.47/4.25
1.59
4.28
6.36
5.07
3.45
2.83
650
4.36
3.74
4.46
3.84
0.89
3.66 m
WEIGHT AND GROUND PRESSURE
Dipper 3.66 m
Dipper 4.44 m
Dipper 5.62 m
With operator, full fuel tank,
lubricant, coolant, bucket*
GROUNDWEIGHT PRESSURE
(kg) (bar)
80 300 1.10
80 506 1.10
81 073 1.15
*Bucket weight: 3000 kg
GROUNDWEIGHT PRESSURE
(kg) (bar)
GROUNDWEIGHT PRESSURE
(kg) (bar)
81 100 -
81 306 -
81 873 -
81 500 -
81 706 -
82 273 -
5.00
3.56/3.88
14.32
7.46
3.47/4.25
1.59
4.28
6.36
5.07
3.45
2.83
650
4.36
3.74
4.46
3.84
0.89
6.30
3.56/3.88
13.83
7.46
3.47/4.25
1.59
4.28
6.36
5.07
3.45
2.83
650
4.36
3.74
4.46
3.84
0.89
4.44 m 5.62 m
E
F
C
8
9
10
11
12m
6
7
5
4
3
2
1
A
2.44 m
G
H
B
1234567891213141517m 16 1011 0
1
2
3
4
5
6
7
10
11
12
15
13
14
9
8
0
D
PERFORMANCE DATAWITH 8.40 m STANDARD BOOM - 5.62 m DIPPER
m
m
m
m
m
m
m
m
daN
daN
daN
daN
Maximum digging reach
Maximum digging reach at ground level
Maximum digging depth
Digging depth - 2.44 m (8’) level botton
Max dump height
Overall reach height
Minimun swing radius
Vertical strainght wall dig depth
Digging force (w/o PowerBoost)
Breakout force (w/o PowerBoost)
Digging force (with PowerBoost)
Breakout force (with PowerBoost)
DIPPER LENGTH 3.66 m 4.44 m 5.62 m
A
B
C
D
E
F
G
H
14.12 14.94 16.11
13.84 14.68 15.86
8.69 9.47 10.67
8.57 9.36 10.56
8.92 9.51 10.17
12.91 13.60 14.30
6.27 6.13 6.21
6.44 7.75 9.11
27 400 23 200 19 500
33 000 33 000 33 000
30 000 25 300 21 400
36 100 36 100 36 100
15
ba
c
CX800
2
LIFTING CAPACITY
� Machine in «LIGHT» mode � Lift capacities are taken in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2 � Lift capacities shown in kg do not exceed 75% of the
tipping load or 87% of the hydraulic lift capacity � Capacities that are marked with an asterisk are hydraulic limited
TRAVEL
(each)
7.25 m
8.40 m
(2)
2.98 m
3.66 m
a b c
5.84 m 3.48 m 2.95 m 25 200 kg
3.47 m 0.83 m 1.39 m 12 500 kg
6.36 m 0.70 m 1.50 m 12 600 kg
7.85 m 1.47 m 2.56 m 7920 kg
8.75 m 1.47 m 2.31 m 8300 kg
2.93 m 1.00 m - 1600 kg
4.38 m 0.74 m 1.50 m 4250 kg
5.20 m 0.74 m 1.40 m 4100 kg
See bucket table
- - - 167 kgSafety rails/other
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m At max reach
REACH
With 8.40 m boom, 3.66 m dipper, 650 mm tracks and 3000 kg bucket
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m
-1.5 m
-3.0 m
-4.5 m
-6.0 m
Front
360°m
10.37
11.15
11.68
12.00
12.13
12.06
11.81
11.34
10.65
9.66
8.3
With 8.40 m boom, 4.44 m dipper, 650 mm tracks and 2890 kg bucket
10.5 m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m
-1.5 m
-3.0 m
-4.5 m
-6.0 m
-7.5 m
10.47
11.45
12.16
12.65
12.94
13.06
13.00
12.76
12.33
11.69
10.81
9.61
7.94
With 8.40 m boom, 5.62 m dipper, 650 mm tracks and 2590 kg bucket
10.5 m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m
-1.5 m
-3.0 m
-4.5 m
-6.0 m
-7.5 m
-9 m
11.98
12.84
13.47
13.91
14.18
14.29
14.23
14.02
13.63
13.06
12.27
11.23
9.85
7.95
Values are expressed in kilos
7407* 7407*
12 897* 12 897* 11 340* 11 340* 7394* 7394*
13 848* 13 848* 12 550* 11 371 7579* 7579*
32 768* 32 768* 22 649* 22 649* 17 823* 17 823* 15 013* 14 218 13 216* 10 867 8006* 8006* 7957* 7957*
25 897* 24 998 19 739* 17 828 16 187* 13 383 13 916* 10 346 9959* 8126 8561* 7964
15 503* 15 503* 27 968* 23 380 21 216* 16 742 17 159* 12 668 14 504* 9884 10 274* 7859 9458* 7785
20 309* 20 309* 28 671* 22 539 22 014* 16 024 17 745* 12 145 14 829* 9536 10 788* 7881
17 964* 17 964* 26 876* 26 876* 28 226* 22 229 22 037* 15 654 17 799* 11 845 14 724* 9343 12 833* 8299
25 277* 25 277* 34 482* 34 482* 26 759* 22 283 21 211* 15 585 17 151* 11 776 13 908* 9355 13 601* 9171
33 261* 33 261* 30 491* 30 491* 24 152* 22 646 19 336* 15 802 15 463* 11 974 13 847* 10 808
24 690* 24 690* 19 943* 19 943* 15 839* 15 839* 13 709* 13 709*
4571* 4571*
8304* 8304* 4324* 4324*
10 491* 10 491* 5225* 5225* 4232* 4232*
12 709* 12 709* 11 603* 11 578 8007* 8007* 4262* 4262*
16 439* 16 439* 13 983* 13 983* 12 376* 11 034 10 036* 8528 4407* 4407*
26 429* 26 429* 24 161* 24 161* 18 574* 18 321 15 309* 13 634 13 203* 10 467 11 757* 8175 4675* 4675*
18 460* 18 460* 26 888* 24 069 20 369* 17 101 16 482* 12 841 13 949* 9945 12 173* 7844 5091* 5091*
9625* 9625* 19 732* 19 732* 28 323* 22 887 21 553* 16 221 17 320* 12 222 14 478* 9524 12 409* 7580 5705* 5705*
15 072* 15 072* 23 871* 23 871* 28 542* 22 305 21 996* 15 690 17 679* 11 813 14 649* 9241 10 577* 7428 6614* 6614*
20 705* 20 705* 29 712* 29 712* 27 684* 22 147 21 632* 15 468 17 421* 11 624 14 280* 9130 8013* 7737
27 007* 27 007* 33 503* 33 503* 25 723* 22 320 20 330* 15 525 16 330* 11 668 13 001* 9242 10 359* 8867
34 511* 34 511* 28 584* 28 584* 22 383* 22 383* 17 752* 15 876 13 884* 12 006 12 300* 10 933
21 277* 21 277* 16 908* 16 908* 12 898* 12 898* 11 629* 11 629*
3837* 3837*
6385* 6385* 3617* 3617*
7751* 7751* 3513* 3513*
10 156* 10 156* 8922* 8922* 5443* 5443* 3502* 3502*
12 295* 12 295* 11 040* 11 040* 10 152* 8792 6724* 6724* 3579* 3579*
29 718* 29 718* 20 990* 20 990* 16 492* 16 492* 13 791* 13 791* 12 012* 10 779 10 770* 8363 7632* 6540 3744* 3744*
25 500* 25 500* 24 479* 24 479* 18 675* 17 756 15 213* 13 219 12 950* 10 157 11 369* 7947 8131* 6277 4012* 4012*
20 742* 20 742* 26 880* 23 503 20 366* 16 600 16 377* 12 434 13 730* 9618 11 851* 7583 7864* 6054 4407* 4407*
12 670* 12 670* 22 087* 22 087* 28 074* 22 453 21 394* 15 800 17 138* 11 850 14 234* 9205 12 106* 7309 6055* 5912 4977* 4977*
16 893* 16 893* 25 856* 25 856* 28 150* 21 936 21 677* 15 337 17 381* 11 486 14 334* 8946 11 981* 7157 5809* 5809*
21 866* 21 866* 31 441* 31 441* 27 152* 21 821 21 138* 15 171 16 969* 11 343 13 851* 8865 10 084* 7180 7076* 6945
27 883* 27 883* 32 995* 32 995* 24 971* 22 047 19 605* 15 284 15 661* 11 437 12 410* 9010 9180* 8173
35 600* 35 600* 27 579* 27 579* 21 236* 21 236* 16 654* 15 707 12 860* 11 840 10 662* 10 393
14 999* 14 999* 11 043* 11 043* 9739* 9739*
www.casece.com
Worldwide Case ConstructionEquipment Contact Information
EUROPE/AFRICA/MIDDLE EAST:
Centre D’affaires EGB
5, Avenue Georges Bataille - BP 40401
60671 Le Plessis-belleville - FRANCE
NORTH AMERICA/MEXICO:
700 State Street
Racine, WI 53404 U.S.A.
LATIN AMERICA:
Av. General David Sarnoff 2237
32210 - 900 Contagem - MG
Belo Horizonte BRAZIL
ASIA PACIFIC:
Unit 1 - 1 Foundation Place - Prospect
New South Wales - 2148 AUSTRALIA
CHINA:
No. 29, Industrial Premises, No. 376.
De Bao Road, Waigaoqiao Ftz, Pudong,
SHANGHAI, 200131, P.R.C.
CX800STANDARD EQUIPMENT & OPTIONS
STANDARD EQUIPMENTHydraulic control
� 4 working modes (3 manual + 1 auto)
� 2 travel speeds with automatic speed change
� Swing brake control
� Load-holding valves on boom and dipper
� Power control - automatic powerboost
� Hydraulic control lever locking, lever position adjustment
� Auxiliary circuit control valve section
� High performance “Ultra Clean” filtration system (1 µ)
Engine control
� Common rail engine Tier 3A European Standards
� Electrical control on injection pump
� Automatic /manual engine return to idle
� Fuel level check
� Emergency stop
� Automatic engine pre-heating
� Pump electric fuel fill
System Monitor, with 14 language display
� Messages (Function, safety, etc.)
� Working modes (H-S-L and Auto)
� Operating modes (travel mode, swing locking, etc.)
� Audible warning device
� Digital clock
� Water temperature
� Hydraulic oil temperature
� Diagnostic system
Electrical system
� Leak-proof connectors
� Double horn
Lighting
� 1 working light on the fuel tank
� 2 working lights on the boom
� 2 working lights on the cab
Operator environment
� Modern cab, 1 meter wide
� Safety glass
� Suspended cab (6 mounting points with rubber/fluid shock
absorbing mountings)
� Windscreen with lockable opening
� “LCD” display
� Water and dust-proof membrane type touch controls
� Windscreen washer and wiper
� Adjustable heater
� Floor mat
� Sun visor
� Rear-view mirror and safety mirrors
� Self adjusting air conditioning
� Anti-theft device
Operator seat
� Air suspension
� Height and tilt adjustment
� Adjustable heat-rest
� Adjustable seat-back angle
� Adjustable arm-rests
� Reel-type safety belt
Equipment
� EMS Extended Maintenance System (articulation greasing every 1000 hours)
OPTIONS� Auxiliary hydraulic circuit
� Possible options and combinations:
- Hammer circuit with pedal control
� Track guide (over full chassis length)
� Safety valve
� Auto-demountable counterweight (hydraulic)
� Cab protection
� Windscreen protection
Fo
rm
No
. 2
60
51
07
5G
B - P
rin
te
d in
Ita
ly - L
EA
DER
Fir
en
ze
- 0
2/
07
NOTE: Standard and optional fittings
can vary according to the demands
and specific regulations of each
country. The illustrations may
include optional rather than
standard fittings - consult your Case
dealer. Furthermore, CNH reserves
the right to modify machine
specifications without incurring any
obligation relating to such changes.
Case Construction EquipmentCNH UK Ltd.
Armstrong House
The Finningley Estate
Hayfield Lane
Doncaster
DN9 3XA
Fax +44 (0)1302 802126
Conforms to directive 98/37/CE
Standard and optional equipment shown can vary by country.