HyMesh™ - Self-Configuring and Self-Healing WiFi Mesh

Networks

hyMeshTM

Is a new technology that enables WiFi routers to communicate with eachother to share access to the internet.

Routers adaptively learn the different paths to get to a particular router.

Routers have a unique pipelining technology that enables them to learn tohand off a stream of packets without any delay. This cuts the transmissiontime of repeater packets to half.

Networks are self healing. If a router fails or loses power, other routers willperform its functions.

Is patented: difficult or impossible for other companies to copy.

Is actively updated with a strong innovative R&D team so it can continue tooutperform.

Uses standard OTS WiFi routers that are proven to be excellent for outdooruse and that are low cost elements.

Highlighting Benefits

Low cost…

Easy setup…

Extended Coverage…

Increased Throughput…

High ROI…

The SolutionCombining our propriety hyMesh™ technology with its Linux/WiFi based platform, to the inexpensive non-proprietary HW from Ubiquiti

hyMesh™ offers a robust Layer-3 mesh network technology with the added benefit of a virtual Layer-2 connectivity where required.

Different hyMesh antenna can be chosen, depending absorption characteristics of the environment.

Technical Features/Setup

Main Features:

1. Interoperable with any WiFi device2. Low cost Ubiquiti platform

(solid outdoor performance -30 to 55 DEGC)3. Multi-Channel Backhaul (Spatial Re-use)4. Mesh with multiple hops (30) have been achieved.5. Configuration free6. Supports AP & Backhaul capabilities7. Self-healing network

hyMeshTM WiFi Demo

hyMeshTM Wand 5.8 GHz Back Haul Node & 2.4 GHz Access Point

Subscriber 2.4 GHz

hyMeshTM

Gateway & Backhaul 5.8 GHz (150 - 500 Mbps)

Legend:

WiFi Deployment with hyMeshTM

1 - 4 Km

System to connect Access Points to

the Internet using hyMeshTM

Subscriber 2.4 GHz

Gateway hyMeshTM

Backhaul 5.8 GHz (150 - 500 Mbps)

Legend:

f2 f1hyMeshTM Backhaul at 5.8GHz (150 – 500 Mbps). Each unit operating at one of two frequency channels f1and f2,

Wand 1 Wand 2 Wand 3 Wand 4…….

hyMeshTM Wand 5.8 GHz Back Haul Node & 2.4 GHz Access Point

HyMesh™ with WifiBlanket Coverage

• This simple network uses a single 5.8 GHz hyMesh™ Gateway at the point of connection to Fiber.

• Two easy to mount dish antennas are connected to the Gateway to provide coverage in both directions

HyMesh™ Grid with WifiCoverage

• All other points uses hyMesh™ Wand which combines a 5.8GHz hyMesh™ Node and a 2.4GHz hyMesh™ AP in a single portable easy to mount wand.

• Connection to power is all it needs

Using Street Light Poles

200 m200 m

Network Diagram

4 Channels 2.4GHz

50Mbps AP, 20MHz

One channel

5.8GHz, 50 Mbps

Backhaul,20 MHz

Channels Used

• A single 5.8 GHz channel is used to connect all the hyMesh™ Nodes

• Four different 2.4 GHz Channels used for Wifi APs.

Authentication and Management

• Wifi can be left Open

• Or it can be managed for hotspots Access

hyMesh™/wifinetwork

Internet Cloud

Gateway

Database and Network Manager

Showcasing the hyMesh

• More than 10,000 event-goers, administrative staff, and artists were

able to enjoy internet service at all four corners of the Calgary Prince’s

Island Park.

Extend Internet Service 2014 Calgary Folk Music Festival

Internet

GATEWAY 1

Ethernet

Cable

Internet

GATEWAY 2Ethernet

Cable

ADMIN AREA

ARTISTS AREA

PUBLIC

ADMIN AREA

ARTISTSAREA

PUBLICPUBLIC

PUBLIC

PUBLIC

PUBLIC

2.4 GHz

Cost Comparison of Available Technologies

0

2

4

6

8

10

12

3G 4G WiFi hyMesh™

Comparison of User Speeds for Different Technologies

0

20000

40000

60000

80000

100000

120000

1G 2G 3G 4G WiFi

Serie3

Serie2

Serie1

Roll-out Requirements

What are the requirements for network roll out?

– Access to street level sites (cafes – lamp posts –homes) with AC power.

– Fiber or high speed ADSL access to the internet at one or more points in the network.

– Holding license for required Wi-Fi frequency bands or partner up with other ISP holding such.

How to offer this technology commercially?

• Customer can opt-in the service easily via online channels.

• Easy three steps to start using the service.

• Multiple Payment channels (SADAD, Credit Cards, Voucher…etc)

Registration

• Customer profile

• ID verification

Package Selection

• Duration (1,3,6,12 months)

• Speed (20,40,100,200 MB)

• Type (Prepaid – Post-paid)

Payment

• SADAD

• Credit Card

• Voucher

Enjoy the service!

• Receive a username and password to access the service

For more Info & Demo Contact:

Contact us on: bleivik@tarec-in.com

www.tarec-in.com

Svein Gaute Bleivik, CEOAgent & Partner for Inovatian

http://www.inovatian.com/