HPLC Chromeleon Software
-
Upload
gamal-abdel-hamid -
Category
Education
-
view
1.941 -
download
6
Transcript of HPLC Chromeleon Software
![Page 1: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/1.jpg)
Chromeleon HPLCSimple Introduction
Gamal A. Hamid
![Page 2: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/2.jpg)
Gamal A. Hamid
2
Contents
Introduction Chromeleon client Chromeleon Console Chromeleon Studio
Simple analysis
1. Start Chromeleon 2. Start the instrument 3. Create a sequence 4. Acquire data 5. Process data 6. Review and report results eWorkflow Getting started
![Page 3: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/3.jpg)
Is a Chromatography Data System that allows you to control chromatography instruments and evaluate, process, report, and backup data.
CHROMELEON
![Page 4: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/4.jpg)
Gamal A. Hamid
4
Chromeleon Software Components:
I. Instrument Controller Service
II. Client
III. Services Manager
IV. Instrument Configuration
Manager
V. Administration Console
![Page 5: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/5.jpg)
Gamal A. Hamid
5
I. Instrument Controller Service
The Instrument Controller (Service) controls the data exchange to and from the Instruments, such as reading the instrument method from a Data Vault and sending it to the instrument, then writing back the raw data delivered from the instrument
Data Vault
Instrument ControllerProcess
Data
RunStart / Stop
Services Manager
Client
![Page 6: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/6.jpg)
Gamal A. Hamid
6
II. Client
The Chromeleon Client provides the user interface for all tasks related to instrument operation, data analysis, and data management.
![Page 7: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/7.jpg)
Gamal A. Hamid
7
III. Service manager
No. Icon Description
1 Stopped
2 Starting or stopping
3 Running idle
4 Active
5 Error
Monitor the status of the Instrument Controller and other services.
Start/Stop the Instrument Controller service.
Launch the Instrument Configuration Manager tool.
![Page 8: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/8.jpg)
Gamal A. Hamid
8
IV. Instrument Configuration Manager
The Instrument Configuration is the tool in Chromeleon to configure chromatography Instruments before they can be controlled by Chromeleon.
![Page 9: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/9.jpg)
Gamal A. Hamid
9
V. Administration Console
The Chromeleon Administration Console is the central access point for all administrative tasks in Chromeleon. In the Chromeleon Administration Console, you can:
Manage users in the User Manager. Allocate licenses in the License Manager. Plan and organize tasks with the Scheduler. Define global policies. Configure the discovery service and
monitor other Chromeleon services. Manage data vaults. Create and manage Organizational Units
![Page 10: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/10.jpg)
10
Client
![Page 11: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/11.jpg)
Gamal A. Hamid
11
II. Chromeleon Client
The Chromeleon Client provides the user interface for all tasks related to instrument operation, data analysis, and data management.
The Chromeleon Client contains two main components:
1. Chromeleon Console
2. Chromatography Studio
![Page 12: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/12.jpg)
Gamal A. Hamid
12
Software Sequence Order
Level 1 order access to the categories “Categories bars” .
Level 2 order navigate through the objects “navigation Pane”.
Level 3 order work with that object “Work area”.
![Page 13: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/13.jpg)
Gamal A. Hamid
13
1. Chromeleon Console
The main Chromeleon window that appears after starting Chromeleon. The Console comprises three major areas: The Category Bars which provide access to the
categories Instruments, Data, and eWorkflows where you can control instruments, navigate through all data and use or manage eWorkflows.
The Navigation Pane where you can navigate through the objects related to the selected category.
The Work Area which shows the content of the object that was selected in the Navigation Pane, and allows you to work with that object.
![Page 14: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/14.jpg)
14
Console Components
![Page 15: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/15.jpg)
Gamal A. Hamid
15
1. Category Bars – These provide direct access to a. Instruments b. Data c. eWorkflows 2. Navigation Area – This displays all objects associated with a specific category bar. Details are provided in the relevant section for the category bars. 3. Work Area – This displays details about the selected object in the navigation area. More details are provided in the relevant section for the category bars. 4. The Filter Toolbar offers different views of the list in the Navigation Pane: a. Local: Items available on the local Chromeleon station. b. Global: Items available on the Chromeleon Domain. c. Custom: Filter based on text input. 5. Menu Bar – provides major commands relevant to the console.6. The Sequence Toolbar is available when a Sequence is selected in the Navigation Pane. 7. The Sequence Status Bar indicates the sequence status. 8. Status Bar shows general information such as the currently logged on user and role.
![Page 16: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/16.jpg)
Gamal A. Hamid
16
2. Chromatography Studio
A separate window that is launched from the Console, in which you can work with data and objects related to a selected sequence.
Here you can view and optimize all aspects of the data, modify instrument methods and processing methods, define and generate reports, and manage spectral libraries.
![Page 17: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/17.jpg)
Gamal A. Hamid
17
Studio Components
![Page 18: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/18.jpg)
Gamal A. Hamid
18
Chromatography Studio
In the Chromatography Studio you can edit all objects related to the selected sequence:
I. Injection List
II. Instrument Methods
III. Data Processing
IV. View Settings
V. Report Templates
VI. Electronic Reports
VII. Spectral Libraries
![Page 19: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/19.jpg)
Gamal A. Hamid
19
I. Injection List
The injection list is the primary element of a Sequence.
The injection list groups injections in the order in which they will be processed and includes injection variables (name, type, etc.) that characterize each injection.
![Page 20: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/20.jpg)
Gamal A. Hamid
20
II. Instrument Methods
The instrument method contains the control commands that are executed in chronological order by an instrument when running an analysis.
The tool used to create an instrument method is the Instrument Method Wizard;
the tool used to view and modify methods is the Instrument Method Editor.
Double-clicking an existing instrument method automatically launches the Instrument Method Editor in the Chromatography Studio.
![Page 21: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/21.jpg)
Gamal A. Hamid
21
instrument method
![Page 22: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/22.jpg)
Gamal A. Hamid
22
III. The Data Processing
![Page 23: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/23.jpg)
Gamal A. Hamid
23
IV. View Settings
View settings define how the results for a sequence are represented in the data processing window.
This includes information such as:The panes displayed in the data processing window, The zoom level and any layout properties of the chromatogram plot, calibration plot, spectral plot, contour plot, and 3D plot, The sheets (tables), columns, auto formats, and properties of the interactive results tables.
![Page 24: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/24.jpg)
Gamal A. Hamid
24
Reports and libraries
V. Report Templates
VI. Electronic Reports
VII. Spectral Libraries
Will cover later.
![Page 25: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/25.jpg)
25
Simple Analysis
![Page 26: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/26.jpg)
Gamal A. Hamid
26
Simple Analysis
1. Start Chromeleon
2. Start the instrument
3. Create a sequence
4. Acquire data
5. Process data
6. Review and report results
Every analysis using Chromeleon follows the same 6 basic steps:
![Page 27: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/27.jpg)
Gamal A. Hamid
27
1. Start the Chromeleon
Start Chromeleon Controller (in the notification area).
Wait until the Instrument Controller is running idle before stopping the service.
(To stop the Controller Right-click the Chromeleon tray
icon in the notification area of the
Windows taskbar. Click Stop Chromeleon Instrument Controller.)
![Page 28: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/28.jpg)
Gamal A. Hamid
28
Configure Instruments
Configure instruments to open the Instrument Configuration Manager, where you can add new instruments or change the current instrument configuration.
![Page 29: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/29.jpg)
Gamal A. Hamid
29
Modules Selection
Retrieving the configuration from module given the right setting of each module.
Select the modules according to the configuration of the system
![Page 30: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/30.jpg)
Gamal A. Hamid
30
2. Start Instrument
To start the Chromeleon software: Double-click the Chromeleon 7
icon on the desktop: The Chromeleon Console
window opens. If user management is active,
you will be prompted to log on to the software.
Enter the credentials provided by your Chromeleon administrator to proceed
![Page 31: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/31.jpg)
Gamal A. Hamid
31
Establishing a Connection
Before you can control an instrument, communication must be established between the modules and the Chromeleon Instrument Controller.
For all installed modules, the Connect command is executed automatically when the Chromeleon instrument service is running.
To connect the modules follow these steps: 1. In the Console, choose the
Instruments category and click your instrument’s name in the Navigation Pane.
2. Select the ePanel tab for the required module in the Work Area (for example Pump).
![Page 32: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/32.jpg)
Gamal A. Hamid
32
Controlling and Monitoring the Instrument
To issue instrument commands follow these steps:
1. In the Console, choose the Instruments category. Select the instrument by clicking its name in the Navigation Pane.
2. In the Work Area select the ePanel tab for the required module.3. Use the controls on the ePanel to issue instrument commands (for example setting the wavelength of a UV/VIS detector or starting mobile phase flow on a pump).
![Page 33: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/33.jpg)
Gamal A. Hamid
33
ePanel/ePanel Set
An ePanel is the window where you monitor and control a module's operation. ePanels are displayed on the
Console in the Instruments view.
If an Instrument includes more than one module, ePanels are grouped into collections, called ePanel Sets.
![Page 34: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/34.jpg)
Gamal A. Hamid
34
ePanels
ePanel For Pump ePanel For UV Detector
![Page 35: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/35.jpg)
Gamal A. Hamid
35
Monitoring
![Page 36: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/36.jpg)
Gamal A. Hamid
36
Other Commands
Command Most common commands are
available from the ePanels. If you need to execute a
command that is not available in the ePanel,
you can access all available instrument commands from a dialog box that is accessible via the Command button in the Instruments toolbar
![Page 37: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/37.jpg)
Gamal A. Hamid
37
3. Creating a Sequence
A sequence determines how a group of injections should be processed.
Sequences can be created in the Console or by using an eWorkflow.You create a sequence using the Sequence Wizard within theConsole. the following files should be created:I. Instrument Method (Must)
II. Processing Method
III. Report Template
But first
![Page 38: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/38.jpg)
Gamal A. Hamid
38
I. Instrument Method
The instrument method contains the instrument commands that will be executed for a sample analysis.
All data entry values are checked against the allowed values.
The commands available depend on the instrument that the program file is connected to.
![Page 39: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/39.jpg)
Gamal A. Hamid
39
Creating an Instrument Method1. In the Instruments category of the Console, select the instrument from the Navigation Pane 2. On the Create menu, click Instrument Method.3. Complete all wizard steps and click Finish. The created instrument method opens in the Chromatography Studio.4. Review the instrument method by selecting the module views in the Navigation Pane. 5. Edit settings, if required. 6. Save the instrument method 7. Close the Chromatography Studio.
![Page 40: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/40.jpg)
Gamal A. Hamid
40
Instrument Method Wizard
Create Instrument method Select Instrument System General Setting Pump Flow Gradient Pump general Setting Sampler General Setting Sampler Injection Mode Sampler Temp. Control Column Oven general
Setting
![Page 41: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/41.jpg)
Gamal A. Hamid
41
Cont.
Column Oven Columns Column Oven Time
Program DAD Channels Setting DAD Time Table FLD General Setting FLD General Setting page 2 Completion Check Method.
![Page 42: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/42.jpg)
Gamal A. Hamid
42
II. Processing Method
A processing method is used to detect and quantify peaks and to evaluate the recorded chromatographic data.
The processing method contains all the data processing instructions (e.g. detection parameters, peak names, etc.).
![Page 43: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/43.jpg)
Gamal A. Hamid
43
Creating a Processing Method
1. In the Console, on the Create
menu, click Processing Method.2. Select one of the predefined layouts and click Next.3. Enter a name, select a file location and optionally enter a comment.4. Click Finish to save the processing method and close the wizard. The new processing method opens in the Chromatography Studio.
![Page 44: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/44.jpg)
Gamal A. Hamid
44
Processing Method Wizard
Create
Processing Method
Processing Method
Template
Named the Method &
Finish
Processing Method in
Studio
![Page 45: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/45.jpg)
Gamal A. Hamid
45
Processing Method Components
Detection
Components Table
Calibration
Unidentified peak G.
table
Chromatogram
Subtraction
Advance Setting
SST/ IRC
![Page 46: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/46.jpg)
Gamal A. Hamid
46
Detection Parameters
Cobra Wizard Integration area Baseline noise range Smoothing width Minimum Area Channels and Injection types
![Page 47: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/47.jpg)
Gamal A. Hamid
47
III. Creating a Report Template
1. In the Console, on the Create
menu, click Report Template.2. Select one of the predefined templates and click Next.3. Select a file location and enter a file name.4. Click Finish to save the report template and close the wizard.
![Page 48: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/48.jpg)
Gamal A. Hamid
48
Report Pages
![Page 49: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/49.jpg)
Gamal A. Hamid
49
Sequence
A sequence determines how a group of injections is processed.
The following elements can be included in a sequence: Injection list (a group of injections that are analyzed) Injection results (the chromatographic data acquired for
each injection) Instrument method (the commands used for controlling the
Instrument) Processing method (the parameters used for evaluating the injection
results)
View settings (the settings used for displaying data in the Chromatography Studio)
Report template (the template used for printing injection results)
Spectral library (a group of spectra used for identifying unknown substances)
![Page 50: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/50.jpg)
Gamal A. Hamid
50
Sequence
Is a collection of injections that are analyzed and processed together in series.
Unknown: A sample for which the quantity, presence, or absence of components is to be determined during the analysis.
Calibration Standard: A sample with known concentration(s) of component(s). Calibration Standards are used in the construction of calibration curves.
Check Standard: A sample with known component concentration(s). Check Standards are used to verify a calibration.
![Page 51: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/51.jpg)
Gamal A. Hamid
51
Cont.
Blank: An injection used to characterize the background signal (baseline), and/or to ensure that unwanted components are not detected. Blank “injections” can be made without an actual injection taking place.
Matrix: The sample matrix. The peak areas in the Matrix can be subtracted from the corresponding peak areas in all the other injections in the sequence.
Unspiked: An Unknown sample to be analyzed with the Standard Addition method.
Spiked: An Unknown sample to be analyzed with the Standard Addition method, with known amounts of components added.
![Page 52: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/52.jpg)
Gamal A. Hamid
52
Creating a Sequence
To create a sequence using the Sequence Wizard within the Console:1. In the Instruments category
of the Console, select the instrument from the Navigation Pane.2. In the Console, on the Create
menu, click Sequence.
![Page 53: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/53.jpg)
Gamal A. Hamid
53
3. Complete the injection configuration settings for the injections4. Click Next. Note: When you are creating a sequence using the wizard, you can only add injections with type Unknown. After the sequence has been created, you can modify the injection types and positions.5. Select methods and reporting preferences: For each field use the button to navigate to and select the file you want to use. When all fields are completed click Next.6. Enter a comment for the sequence (optional) and click Finish.7. The Save dialog box opens.8. Specify where to save the sequence, enter a file name, click Save.
Cont.
![Page 54: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/54.jpg)
Gamal A. Hamid
54
New Sequence Wizard
![Page 55: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/55.jpg)
Gamal A. Hamid
55
4. Acquire Data
1- Starting an Analysis After the sequence has been created and the instrument is ready, you can start data acquisition. Checking that the Instrument is Ready Check the baseline, for example, select the detector’s ePanel
and click the Monitor Baseline button. When you are satisfied that the instrument is ready for analysis, start the sequence. Starting the Sequence 1. Select the Data category in the Console. 2. In the Navigation Pane, select the sequence you want to run by clicking on it. Sequence then opens in the Work Area.
![Page 56: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/56.jpg)
Gamal A. Hamid
56
2- Monitoring an Ongoing Analysis During analysis it is useful to monitor the detector signal and other
instrument parameters (such as pressure and temperature). To monitor an ongoing analysis: 1. In the Console, choose the Instruments category and click your instrument’s name in the Navigation Pane. 2. Select the Home ePanel in the Work Area to monitor the detector signal and audit trail.Note: The settings of other modules can be monitored on their respective ePanels.
![Page 57: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/57.jpg)
Gamal A. Hamid
57
5. Processing Data
After chromatographic has been acquired, it can be processed.
All processing steps are performed in the Studio and saved in a processing method.
![Page 58: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/58.jpg)
Gamal A. Hamid
58
Data Processing Home
![Page 59: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/59.jpg)
Gamal A. Hamid
59
Data Processing Steps
I. Reviewing Data in the Chromatography Studio
II. Working with Chromatograms
III. Detecting and Integrating Peaks
IV. Identifying Peaks
V. Calibration and Quantitation
![Page 60: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/60.jpg)
Gamal A. Hamid
60
I. Reviewing Data in the Studio
After data for all samples in a sequence has been acquired, it is useful to review the chromatograms and peak data before reporting the results.
Often, peak detection, integration and calibration settings need to be modified before results are reported.
![Page 61: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/61.jpg)
Gamal A. Hamid
61
View Options
There are several views in Chromeleon which can be selected from the Presets group on the Data Processing Home tab.
You can also create new views and store these to be used again.
![Page 62: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/62.jpg)
Gamal A. Hamid
62
II. Working With Chromatograms
You can view the integrated chromatogram of the current injection in the chromatogram .
If the evaluation of data is not what you want, you can adapt the layout of the chromatogram to your needs.
![Page 63: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/63.jpg)
Gamal A. Hamid
63
Layout Options
![Page 64: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/64.jpg)
Gamal A. Hamid
64
III. Detecting and Integrating Peaks
For correct quantification or qualification of a chromatogram, all peaks of interest must be detected and correctly integrated.
To achieve this you can either: Create a new set of detection parameters. or Modify an existing processing method.
![Page 65: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/65.jpg)
Gamal A. Hamid
65
Creating a New Set of Cobra Detection Parameters
Modifying an existing Processing Method
Insert a New Detection Parameter
Modify and Delete Detection Parameters
Integrate Unresolved Peaks
Steps
![Page 66: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/66.jpg)
Gamal A. Hamid
66
Smart peaks
The SmartPeaks™ assistant helps you to quickly
calculate the baseline of unresolved peaks.
All you need to do is drag a window over the peaks of interest in your chromatogram.
Cobra + Smart peaks together are enough to integrate 99% of chromatograms.
![Page 67: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/67.jpg)
Gamal A. Hamid
67
IV. Identifying Peaks
After peaks have been detected and satisfactorily integrated, they can be used for reporting or results calculations.
When reporting, it is useful to name components in a chromatogram.
Creating a Component Table
Modifying Retention Times and Windows
![Page 68: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/68.jpg)
Gamal A. Hamid
68
Component Table
The component table is part of the Processing Method Editor and contains all parameters required to identify a peak and to determine the amounts of the substances serving as standards.
The Name variable, is set to a generated name (Component 1, Component 2, etc.).
The Window variable is set to an absolute value, which represents one-fourth of the distance from a peak to either the preceding peak or the next peak, depending on which peak is nearer.
The Peak Type variable is set to AutoDetect, indicating that Chromeleon determined the peak type.
The Comment variable is set to auto generated, indicating the component was created with the wizard.
![Page 69: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/69.jpg)
Gamal A. Hamid
69
Create a Component Table
There are three ways to create a component table: Via the Component Table Wizard Interactively in the chromatogram pane Via the component table (processing method)
![Page 70: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/70.jpg)
Gamal A. Hamid
70
V. Calibration and Quantitation
In order to convert the area below a peak or the peak height into absolute amount or concentration values, calibration
is required before the analysis. The calibration coefficients
obtained during calibration can then be used to calculate unknown amounts.
![Page 71: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/71.jpg)
Gamal A. Hamid
71
Specifying the type. Creating and Assigning Calibration
Levels. Entering Calibration Standard
Amounts or Concentrations. Viewing Calibration
Curves.
![Page 72: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/72.jpg)
Gamal A. Hamid
72
6. Reviewing and Reporting Results
After data has been acquired and calibration performed you can review and report results.
You can create report templates in any format and layout you require, or use one of Chromeleon's default templates.
![Page 73: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/73.jpg)
Gamal A. Hamid
73
To Start a Report
Open the injection for which you want to view the report. On the Navigation Pane of the Chromatography Studio, click
Report Designer. As an alternative, you can double-click a report template file
in a sequence (under Associated Items). This will open the report showing the first injection in the injection list.
Chromeleon opens the report with the default report template that is assigned to the sequence. If the sequence does not contain a report template yet, the Create a Report Template wizard is opened
To create a new report template In the Chromeleon Console, on the Create menu, click Report Template.
![Page 74: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/74.jpg)
Gamal A. Hamid
74
Report Template
![Page 75: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/75.jpg)
75
eWorkflow
Routine Analysis
![Page 76: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/76.jpg)
Gamal A. Hamid
76
eWorkflow
An eWorkflow is an electronic procedure for automating the laboratory processes related to a chromatographic analysis.
It assists the user in creating an appropriate sequence with predefined associated files and a well-defined structure.
An eWorkflow is typically created and configured by an administrator or lab manager in the eWorkflow Editor.
![Page 77: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/77.jpg)
Gamal A. Hamid
77
Creation
1. Click eWorkflow in bars2. Create, create
eWorkflow.3. Add the required field:
Instrument, Methods, Attached files.
4. Select the state Ready for Use.
![Page 78: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/78.jpg)
Gamal A. Hamid
78
Sequence General
Select : The Report Template . The View Settings. The channel to be
displayed during injection. Sequence name . Data Vault, Path - select
the Storage Location for the Sequence.
![Page 79: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/79.jpg)
79
Sequence layout
1. Sequence header( Once)
2. Sample Block (repeated)
3. Bracket ( repeated)4. Sequence footer
( Once)
Sequence layout
![Page 80: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/80.jpg)
80
No. Option Description
1 Max. Samples per Bracket
that is, the repetitions of the sample block allowed per bracket. (e g. 4 samples)
2Max. Brackets per Sequence
Define the maximum number of bracketed sample blocks allowed in a sequence. ( e g. 3 Brackets)( 3 Brackets, 4 is Max Number of samples per Bracket) so this sequence can contains 12 samples max.
No. of Alternate Brackets
As complex sequences may require different types of brackets, Define the number of alternating brackets in the layout. Max 5
4 Use Bracket Block after Sequence
Header
Select this check box to insert a bracket block directly after the header block and before the first sample block.
5Layout template
The layout template is divided into several blocks, each in a different color. To add a new injection to a block, click the bottom line of the block.
6Sequence Preview
Type or select a number in the Number of Samples box to see what the injection list will look like. The preview will be refreshed as soon as you change the above settings or layout.
Sequence layout
![Page 81: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/81.jpg)
Gamal A. Hamid
81
Sequence layout
- preview
1. Header2. 12 Samples,3
Samples per Brackets,4 Brackets
3. Footer
Sequence layout
![Page 82: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/82.jpg)
Gamal A. Hamid
82
Run eWorkflow click the category eWorkflows Select which eWorkflow Click Launch Set the number of samples to 12 Set the start position to 1. Click Finish.
![Page 83: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/83.jpg)
Gamal A. Hamid
83
Start
![Page 84: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/84.jpg)
84
Getting started A. Tarek
![Page 85: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/85.jpg)
Gamal A. Hamid
85
Getting Started Steps
1- Switch on the instrument (open each module)2- Switch on the PC .3- Make sure the dongle is inserted at USB port.4- Make Sure server is ON if not follow the following a- click on server icon b- click "start Instrument controller“ c- close service manager5- Double Click on the Chromeleon icon6- The "Home page" will open, make sure all modules are connected.
![Page 86: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/86.jpg)
Gamal A. Hamid
86
7- Open purge valve from Pump Module.8- Open "Pump" page, Press the purge button.9- Make sure to get all air bubble out of the lines then close the purge.10- Open the "Sampler" page.11- Press the "Prime syringe" & "Wash buffer loop" & "Wash needle" button respectively .
![Page 87: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/87.jpg)
Gamal A. Hamid
87
12- Open the "Detector" page.13- Switch on the Lamps and enter the wavelength14- Go to "Data" Page15- Create New Folder and name it.16- Press "create" and create sequence17- Follow the wizard to create your sequence.18- Press "create" and create your inst. Method.19- Follow the wizard to create your method.20- "Start" your sequence.
![Page 88: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/88.jpg)
Gamal A. Hamid
88
21- Create your processing Method Using "Cobra" wizard22- Create & print Report using "Report Page“
![Page 89: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/89.jpg)
Gamal A. Hamid
89
Using Calibration
1- From sequence need to choose standards. 2- Choose level (create levels equal to no. of different concentration)3- Save Sequence4- double click on any sample to open processing method5- Enter the concentration of each point at Levels box6- To View Calibration curve click on "Calibration Plot"7- To view result you will find Amount, Tab active NOW
![Page 90: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/90.jpg)
90
Shutdown
![Page 91: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/91.jpg)
Gamal A. Hamid
91
The instrument is automatically shut down. The pump flow is stopped at the end of the method. Certain system components (for example, detector lamps and
temperature-controlled modules) are turned off. Shutdown procedures are launched from the Console. You can specify whether the procedure starts immediately or
automatically, as part of a queue. Before launching Smart Shutdown, make sure the mobile phase in the
flow path does not contain dissolved salts (such as those in buffer solutions). Salt crystals that can form after the flow stops will shorten the lifetime of piston seals and may cause damage to columns. To avoid such problems, flush the flow path with a non-ionic fluid that is compatible with your column, such as deionized water and/or an organic solvent.
Smart Shutdown
![Page 92: HPLC Chromeleon Software](https://reader035.fdocuments.net/reader035/viewer/2022062219/5878b3b91a28ab724c8b619b/html5/thumbnails/92.jpg)
Gamal A. Hamid
92
To run Smart Shutdown
Display the queue Click the down arrow next to
After running the queue, and then click run Smart Shutdown or run Smart Standby.