Hot Melt Adhesive Applicators Series EP 48-V UL...

NORDSON ENGINEERING GMBH � LÜNEBURG � GERMANY

Hot Melt Adhesive ApplicatorsSeries EP 48-V

UL Design

Parts List P/N 7156338D− English −

Issued 12/10

P/N 7156338D � 2010 Nordson CorporationEP48V_UL_PARTS

NoteThis document is for products with the following P/N:

7154401

7154402

7154403

7154404

7154405

7154406

Order numberP/N = Order number for Nordson products

NoticeThis is a Nordson Corporation publication which is protected by copyright. Original copyright date 2009.No part of this document may be photocopied, reproduced, or translated to another language without theprior written consent of Nordson Corporation. The information contained in this publication is subject to

change without notice.

� 2010 All rights reserved.

TrademarksAccuJet, AeroCharge, Apogee, AquaGuard, Asymtek, Automove, Autotech, Baitgun, Blue Box, Bowtie, CanWorks, Century, CF, CleanSleeve,CleanSpray, Color-on-Demand, ColorMax, Control Coat, Coolwave, Cross-Cut, cScan+, Dispensejet, DispenseMate, DuraBlue, DuraDrum, Durafiber,DuraPail, Dura-Screen, Durasystem, Easy Coat, Easymove Plus, Ecodry, Econo-Coat, e.dot, Emerald, e.stylized, EFD, Encore, ESP, ETI−stylized, Excel2000, Fillmaster, FlexiCoat, Flexi-Spray, Flex-O-Coat, Flow Sentry, Fluidmove, FoamMelt, FoamMix, Fulfill, GreenUV, HDLV, Heli-flow, Helix, Horizon,Hot Shot, iControl, iDry, iFlow, Isocoil, Isocore, Iso-Flo, iTRAX, JR, KB30, Kinetix, Lean Cell, Little Squirt, LogiComm, Magnastatic, March, Maverick,MEG, Meltex, Microcoat, Micromark, MicroSet, Millenium, Mini Squirt, Moist-Cure, Mountaingate, Nordson, OptiMix, Package of Values, PatternView,PermaFlo, PicoDot, PluraFoam, Porous Coat, PowderGrid, Powderware, Precisecoat, Primarc, Printplus, Prism, ProBlue, Prodigy, Pro-Flo, ProLink, Pro-Meter,Pro-Stream, RBX, Rhino, Saturn, Saturn with rings, Scoreguard, SC5, S. design stylized, Seal Sentry, Select Charge, Select Coat, Select Cure, Signature,Slautterback, Smart-Coat, Solder Plus, Spectrum, Speed-Coat, Spraymelt, Spray Squirt, Super Squirt, SureBead, Sure Clean, Sure Coat, Sure-Max,Sure Wrap, Tela-Therm, Tracking Plus, TRAK, Trends, Tribomatic, TrueBlue, TrueCoat, Ultra, UniScan, UpTime, u-TAH, Vantage, Veritec, VersaBlue,Versa-Coat, VersaDrum, VersaPail, Versa-Screen, Versa-Spray, Walcom, Watermark, When you expect more. are registered trademarks − ® − ofNordson Corporation.

Accubar, Advanced Plasma Systems, AeroDeck, AeroWash, AltaBlue, AltaSlot, Alta Spray, AquaCure, ATS, Auto-Flo, AutoScan, Axiom, Best Choice,BetterBook, Blue Series, Bravura, CanNeck, CanPro+, Celero, Chameleon, Champion, Check Mate, ClassicBlue, Classic IX, Clean Coat, ContourCoat,Controlled Fiberization, Control Weave, CPX, cSelect, Cyclo-Kinetic, DispensLink, DropCure, Dry Cure, DuraBraid, DuraCoat, e.dot+, E-Nordson,Easy Clean, EasyOn, EasyPW, Eclipse, Equalizer, Equi=Bead, Exchange Plus, FillEasy, Fill Sentry, FlowCoat, Fluxplus, G-Net, G-Site, Get Green WithBlue, Gluie, Ink-Dot, iON, Iso-Flex, iTrend, KVLP, Lacquer Cure, Maxima, Mesa, MicroFin, MicroMax, Mikros, MiniBlue, MiniEdge, Minimeter, MonoCure,Multifil, MultiScan, Myritex, OmniScan, Nano, OptiStroke, Origin, Partnership+Plus, PatternJet, PatternPro, PCI, Pinnacle, Plasmod, PluraMix,Powder Pilot, Powder Port, Powercure, Process Sentry, Pulse Spray, PurTech, Quad Cure, Ready Coat, RediCoat, Royal Blue, Select Series,Sensomatic, Shaftshield, SheetAire, Smart, SolidBlue, Spectral, Spectronic, SpeedKing, Spray Works, Summit, Sure Brand, SureFoam, SureMix, SureSeal,Swirl Coat, TAH, Tempus, ThruWave, TinyCure, Trade Plus, Trilogy, Ultra FoamMix, UltraMax, Ultrasaver, Ultrasmart, Universal, ValueMate, Viper, Vista,Versa, WebCure, 2 Rings (Design) are trademarks − � − of Nordson Corporation.

Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes, could lead to violation of the owners’ rights.

Table of Contents I

P/N 7156338D� 2010 Nordson Corporation EP48V_UL_PARTS

Table of ContentsHow to Use Illustrated Parts List 1. . . . . . . . . . . . . . . . . . . . . . . . . . .Model Overview 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Assembly Overview 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Front View 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back View 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ship−With−Kit 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service Kits 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pressure Regulator 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Filter Unit & Filter Cartridge 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Filter Sleeve 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Seals 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tight-Fit Screws & Disc Springs 15. . . . . . . . . . . . . . . . . . . . . . . . .Guide Plates 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Clamping Bar 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nozzle 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Threaded Bush 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Adjustable Device 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Drip Tray 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pressure Indicator 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .O-Rings for Modules 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Safety Signs 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of ContentsII


Spare Parts 1


How to Use Illustrated Parts ListThe parts lists in this section are divided into the following columns:

Item— Identifies parts that can be obtained from Nordson.

Part — Nordson part number for each spare part shown in theillustration. A row of hyphens in the column Part (- - - - -) indicates thatthis part can not be ordered separately.

Description— This column contains the name of the part and, whenappropriate, its dimensions and other properties. The points in thecolumn Description show the relationship between assemblies,subassemblies and single parts.

Quantity— The quantity needed per unit, assembly or subassembly.The abbreviation AR (as required) is used when this item is a bulk itemor when the quantity per assembly depends on the product version ormodel. Number in parentheses = additional quantity as spares.

Where used— Applicator model part number

2 Spare Parts


Model Overview7154401 7154402

7154403 7154404

7154405 7154406

Spare Parts 3


Item Part Description Quantity Note

− 7154401 Applicator EP48−V LA330 side gluing:0.3x45° 1

− 7154402 Applicator EP48−VM LA330 side gluing:no 1

− 7154403 Applicator EP48−VL side gluing:0.3x45° 1

− 7154404 Applicator EP48−VL side gluing:1.1x4mm 1

− 7154405 Applicator EP48−VSB side gluing:1.1x3mm 1

− 7154406 Applicator EP48−V side gluing:1.1x4mm, reverse 1

4 Spare Parts


Assembly Overview

Front View

1013

3

4

5

11

1

2

612

5

7

128,9

Fig. 1

Spare Parts 5


Item Part Description Quantity Note Where used

1 7157158 Pressure regulator LA330−II 10:1 1 Fig. 4 7154401

7154402

2 271484 Drain valve 1 all

3 −−−−−− Filter unit EP48−V UL−design 1 Fig. 5 all

4 −−−−−− Filter cartridge MW0,4 EP48−V 1 Fig. 6 all

5 −−−−−− Guide plates 2 Fig. 9

6 −−−−−− Clamping bar 1 Fig. 10 all

7 −−−−−− Nozzle 1 Fig. 11+12

8 −−−−−− Threaded bush 1 Fig. 13

9 7150833 Pressure piece EP48−V for threaded bush 1 Fig. 13 all

10 −−−−−− Adjustable device 1 Fig. 14to

Fig. 17

11 −−−−−− Drip tray 1 Fig. 18

12 734891 Screw, double-hex, M8x16 2 all

13 7140961 Cord set w/ Ni120 temperature sensor

KO/MI/0,650/1xNI120/1xTS UL

1 all

6 Spare Parts


Back View

2

3

4

5

1

3

2

88

77

66

Fig. 2 Shown w/o drip tray

Spare Parts 7



1 −−−−−− Pressure indicator 1 Fig. 19 all

2 7157162 Control module EP48−V f. appl. fold bellow 1 A all

3 7157163 Snuff back module EP48−V tandemseal 1 A all

4 7157110 Heater cartridge 1/4”x1,5” 230V−160W UL 6 all

5 7147786 Thermostat 200°C �5°C UL 1 all

6 7133153 Bracket EP48−VSB VX compl. 1 7154402

7154405

396022 Bracket EP48−V VX compl. 1 7154401

7154403

7154404

7154406

7 7133144 Trigger bar EP48−VSB VX 1 7154405

8 −−−−−− Safety signs Fig. 21 all

Note A: Use new o-rings when replacing modules. Refer to page 23, O-Rings for Modules

8 Spare Parts


Ship−With−Kit

12

5+6

4

8

9

4

1

10+11

2

3

115 mm 83 mm

7

7147785 7130326

Fig. 3

Spare Parts 9


Item Part Part Description Quantity Note Where used

−

7157126 Kit−INST Ship−with kit EP48−V

1 B

all

7165984Kit−INST Ship−with kit EP48−V, flatpot size

1 −−−−−− −−−−−− � High−temperature grease, 250g 1

2 −−−−−− −−−−−− � Catch pan EP48−V 1

3 7147788 7147788 � Measuring magnifier 8x 1

4 −−−−−− −−−−−− � O−ring 60x3 Viton 1 (+2) A

5 −−−−−− −−−−−− � Seal EP48−V LH 1 A

6 −−−−−− −−−−−− � Seal EP48−V RH 1 A

77147785 � Drain pot EP48−V complete

17130326 � Drain pot EP48−V complete, Flat

8 −−−−−− −−−−−− � Y−plug single 1xD8/2xD6 1

9 −−−−−− −−−−−− � Reducer straight D10/8 1

10 −−−−−− −−−−−− � Air hose D6,0 d4,0 PTFE 150 mm

11 −−−−−− −−−−−− � Air hose D6,0 d4,0 PTFE 150 mm

12 7157105 7157105 � Feeler gauge EP48−V complete 1

− −−−−−− −−−−−− � � Feeler gauge 0,05−1,0 L200 20stripes 1

− −−−−−− −−−−−− � � Bead chain 300 mm

− −−−−−− −−−−−− � � Bead chain coupling 2 (+2)

− −−−−−− −−−−−− � � Allan head cap screw M4x6DIN912 SST 1 (+1)

Note A: Also part of seals kit P/N 7157143

B: Use kit P/N 7165984 for binders which need flat sized pots

10 Spare Parts


Service Kits

Pressure Regulator

2

10

6

9

5

4

12

78

1 11

Fig. 4

Spare Parts 11



1 7157158 Kit−SVC EP48−V pressure regulator LA330−II 1 10:1 7154401

7154402


− 7157186 Kit−SVC EP48−V regulator bush for LA330−II 1 7154401

7154402

2 −−−−−− � Bush 20H7/8H7 L70 ICER+ 1

3 −−−−−− � O−RING 20x2 VITON 1

4 −−−−−− � O−RING 22x2 VITON 1

5 −−−−−− � O−Ring 24x2 Viton 1


− 7157185 Kit−SVC EP48−V piston for LA330−II 1 7154401

7154402

6 −−−−−− � Piston D20/D8 L52 1

7 −−−−−− � Tight−fit screw M4x14,4 D5,1 ICER+ 1

8 −−−−−− � Turcon−Variseal−M2S outside seal D8 1


10 −−−−−− � Guide ring Turcite 20 1

11 7106940 Assembly tool LA330−II piston 1 A

Note A: To be ordered separately


− 7108773 Kit−SVC EP48−V sealings LA330−II 1 7154401

7154402



10 −−−−−− � Guide ring Turcite 20 1

3 −−−−−− � O−RING 20x2 VITON 1

4 −−−−−− � O−RING 22x2 VITON 1

5 −−−−−− � O−Ring 24x2 Viton 1


12 271484 Drain valve 1 all

12 Spare Parts


Filter Unit & Filter Cartridge

2

4

3

1

56

Fig. 5


1 7157130 Filter unit EP48−V UL−design 1 all

2 7140961 � Cord set w/ Ni120 temperature sensorKO/MI/0,650/1xNI120/1xTS UL

1

3 7147786 � Thermostat 200°C �5°C UL 1

4 7157111 � Heater cartridge 3/8”x1,5” 230V−75W UL 8

5 −−−−−− � O-Ring 16x2.5 Viton 1 A

6 411381 Filter cartridge MW0,4 EP48−V 1 Fig. 6 all

Note A: Also part of seals kit P/N 7157143

Spare Parts 13


Filter Sleeve

1

2

Fig. 6


− 7157147 Kit−SVC EP48−V filter sleeve 1 all

1 −−−−−− � Filter sleeve MW0,4 GR06−121 GT new 1

2 −−−−−− � Sealing ring 33x39 DIN7603 form A 1 (+1)

14 Spare Parts


Seals

1

4

4

2

3

Fig. 7

Spare Parts 15


Seals (contd.)


− 7157143 Kit−SVC EP48−V seals 1 Fig. 7 all

1 −−−−−− � O−ring 60x3 Viton 1 (+3)

2 −−−−−− � Seal EP48−V LH 1 (+1)

3 −−−−−− � Seal EP48−V RH 1 (+1)

4 −−−−−− � O-Ring 16x2.5 Viton 2 (+2)

Tight-Fit Screws & Disc Springs

12

7773

Fig. 8


− 7157144 Kit−SVC EP48−V tight−fit screws & disc springs 1 all

1 −−−−−− � Tight−fit screw M6x30 D8 7 (+1)

2 −−−−−− � Disc spring A16x8,2x0,9 DIN2093 type A 56 (+4)

3 −−−−−− � Tight−fit screw M5x10 D6 4 (+4)

16 Spare Parts


Guide Plates

2

32

3

1

1

4

45

5

or

Fig. 9


− 7157178 Kit−SVC EP48−V guide plates sd.glue: 0.3 1 A 7154401

7154403

− 7157177 Kit−SVC EP48−V guide plates sd.glue: 0 mm 1 A 7154402



− 7157175 Kit−SVC EP48−V guide plates sd.glue: 4, reverse 1 7154406

− 7157176 Kit−SVC EP48−V guide plates sd.glue: 0, reverse 1 7154406

− see above Kit−SVC EP48−V guide plates 1

1 −−−−−− � Tight−fit screw M5x10 D6 4 B all

2 −−−−−− � Seal EP48−V LH 1 (+1) C all

3 −−−−−− � Seal EP48−V RH 1 (+1) C all

4+5 −−−−−− � Guide plate 1+1

Note A: Can also be used with other applicators, with the exception of P/N 7154406

B: Also part of tight−fit screws&disc springs kit P/N 7157144

C: Also part of seals kit P/N 7157143

Spare Parts 17


Clamping Bar

1

2

3

Fig. 10


− 7157149 Kit−SVC EP48−V clamping bar 1 all

1 −−−−−− � Clamping bar EP48−V VX w/ chamfer 1

2 −−−−−− � Tight−fit screw M6x30 D8 7 A

3 −−−−−− � Disc spring A16x8,2x0,9 DIN2093 type A 56

8pc (7x)

A

Note A: Also part of tight−fit screws&disc springs kit P/N 7157144

18 Spare Parts


Nozzle

1

2

2

Fig. 11


− 7157148 Kit−SVC EP48−V nozzle 1 7154401

to

7154405

1 −−−−−− � Coating nozzle EP48−V 1−60 slot 1.1 VX 1

2 −−−−−− � Parallel pin D6m6x20 DIN6325−D 4

2

1

2

2

Fig. 12


− 7157159 Kit−SVC EP48−V nozzle reverse 1 7154406

1 −−−−−− � Coating nozzle EP48−V 1−60 slot 1.1 VX rev 1

2 −−−−−− � Parallel pin D6m6x20 DIN6325−D 4

Spare Parts 19


Threaded Bush

3

2

1

4

Fig. 13


− 7157184 Kit−SVC EP48−V threaded bush M10x1 LH 1 7154401

7154403

7154406

− 7157183 Kit−SVC EP48−V threaded bush M10x1 1 7154404

− 7157182 Kit−SVC EP48−V threaded bush M10x1,75 1 7154402

7154405


− see above Kit−SVC EP48−V threaded bush 1

1 −−−−−− � Threaded bush EP48−V 1

2 −−−−−− � Allan head cap screw M3x8 DIN912 SST 3 (+5)

3 −−−−−− � Parallel pin D3m6x16 DIN6325−D 1 (+1)


4 7150833 Pressure piece EP48−V for threaded bush 1 all

20 Spare Parts


Adjustable Device

1

Fig. 14


1 7157151 Kit−SVC EP48−V adjustable device 1 7154401

7154403

1

Fig. 15



Spare Parts 21


1

Fig. 16



7154405

1

Fig. 17


1 7157153 Kit−SVC EP48−V adjustable device reverse 1 7154406

22 Spare Parts


Drip Tray

12

33

Fig. 18


− 7157150 Kit−SVC EP48−V drip tray 1 7154401

7154402

7154403

7154404

7154405

− 7157154 Kit−SVC EP48−V drip tray 1 7154406


− see above Kit−SVC EP48−V drip tray 1

1 −−−−−− � Drip tray EP48−V VX 1

2 −−−−−− � Allan head cap screw M6x8 1 (+1)

3 −−−−−− � Allan head cap screw M4x8 DIN6912 SST 2 (+2)

Pressure Indicator

1

2

Fig. 19


− 7157145 Kit−SVC EP48−V pressure indicator 1 all

1 −−−−−− � Pressure indicator 0−100 bar D40 1

2 −−−−−− � Sealing ring 17x21 DIN7603 form A 1 (+1)

Spare Parts 23


O-Rings for Modules

(206090)

(250254)

1

2

(250257)3

Fig. 20


− 7162005 Kit−SVC EP48−V o−rings for modules 1 all

1 −−−−−− � O−RING 17x1,5 Viton 70Shore A black 5

2 −−−−−− � O−RING 12x2,5 VITON 70 shore A black 5

3 −−−−−− � O−RING 16x2 Viton 80 shore A black 5

24 Spare Parts


Safety Signs

1 2

1

11

Fig. 21


− 7157181 Kit−SVC EP48−V warning sign Hot surface 1 all

1 −−−−−− � Sign, hot surface, general UL 1

2 −−−−−− � NOTCHED TAPER PIN 1,7x4 DIN1476 2 (+1)

Continued...

Spare Parts 25


1

5

78

6

2

1

4

33

Fig. 22 E.g. electrical cover of filter unit


1 7157173 Electrical cover EP48−V electric box complete 1 all

2 7157172 Electrical cover EP48−V body complete 1 all

3 206162 Electrical cover EP48−V filter unit complete 1 all


− see above Electrical cover EP48−V complete 1

4 −−−−−− � Sign “Dangerous voltage” 1

5 −−−−−− � Blind rivet cl.end 3,2x6,5 DIN7337 2

6 −−−−−− � Electrical cover 1

7 −−−−−− � Serrated lock washer D3,2 DIN6798 A 1

8 −−−−−− � Flat plug non−insolated type:A 1

26 Spare Parts


Hot Melt Adhesive Applicators Series EP 48-V UL...

Documents

Transcript of Hot Melt Adhesive Applicators Series EP 48-V UL...