HOSE REELS HOSE REELS - Home - Maxquip

Click here to load reader

  • date post

    16-Mar-2022
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of HOSE REELS HOSE REELS - Home - Maxquip

190
EE LSHannay LPG Reels
PB/ DPB Manual or Power Rewind Reels To handle single 1” through 1-1/2” I.D. hose. • Series PB are explosion-proof reels. • New DPB Series reel is direct drive eliminating the use of chain and sprockets. • Choose gear-driven crank rewind, chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor. • Crank rewind reels and direct drive reels supplied with pinion brake. • Power rewind reels (chain & sprocket driven) supplied with a strap brake. Other brake and locking devices may be specified. • Standard inlet is 90° ball bearing swivel joint with 1-1/2” female NPT threads. • Standard outlet is a flanged riser with 1” female NPT threads. Standard inlet, outlet riser, and hub assembly are steel. • Other sizes and/or threads can be furnished and must be specified. • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 350 psi (24 bar). • Temperatures from -40° F to +350° F (-40° C to +177° C). • Consult factory for other pressures and temperatures.
Model Hose Capacity of Reel Approx.Weight Reel Dimensions*** Number feet Crank Rewind inches
m. lb. mm. kg.
See Note 4
I.D. (in) 1" 1-1/2" F I.D. (mm) 25 38 DIRECT O.D. (in) 1.5" 2.16" NET* SHIP A B D E F DRIVE G H X Y O.D. (mm) 38 55 POWER HYD
PB24-23-24 125 50 102 144 21 15.5 20.5 22.75 29.25 35.12 23.5 12.12 13 16.75 38 15 46 65 533 394 521 578 743 892 597 308 330 425
PB30-23-24 150 75 115 157 27.5 22 20.5 22.75 35.75 41.62 23.5 12.12 19.5 16.75 46 23 52 71 699 559 521 578 908 1057 597 308 495 425
PB24-25-26 150 75 110 152 21 15.5 25.5 24.75 29.25 35.12 27.88 15.5 13 21.75 46 23 50 69 533 394 648 629 743 892 708 394 330 552
PB28-25-26 200 100 123 165 25.5 20 25.5 24.75 33.75 39.62 27.88 15.5 17.5 21.75 61 30 56 75 648 508 648 629 857 1006 708 394 445 552
PB22-30-31 250 100 118 168 19 13.5 25.5 28.75 27.25 33.12 29.88 15.5 11 21.75 76 30 54 76 483 343 648 730 692 841 759 394 279 552
PB18-33-34 200 75 117 167 14.5 9.5 31.5 31.75 23.75 29.12 33.62 17.75 7 27.75 61 23 53 76 368 241 800 806 603 740 854 451 178 705
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected]
Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and
with disc sizes in other diameters. 3. Dimensions shown for reels up to and including 30-31 disc size reflect
pressed frames. All others are channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models: Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.)
Electric 40 40 18.1 18.1 Hydraulic 20 20 9.1 9.1 Air 20 20 9.1 9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – Supplied with control valve and hose. E = Explosion Proof Electric Rewind (1/2 HP) – Supplied with explosion proof switch, solenoid, and junction box. HD = Hydraulic Rewind – Not supplied with control valve. D = Direct Drive Hydraulic Rewind – Not supplied with control valve
6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. ***x,y indicate mounting holes.
3
For Power Rewind
See Note 5
191
SE R
EE LS
To handle single 1” through 1-1/2” I.D. hose. • Choose chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor. • Auxiliary crank rewind standard on DPB Series reels. Available on PB Series power rewind reels, at extra cost. • Direct drive hydraulic rewind reels supplied with pinion brake. Electric powered rewind reels supplied with a strap brake. • Other brake and locking devices may be specified. (See Ordering & Accessory Guide) • Standard inlet is 90° ball bearing swivel joint with 1-1/2” female NPT threads. • Standard outlet is a flanged riser with 1” female NPT threads. • Standard inlet, outlet riser, hub assembly are steel. • Other sizes and/or threads can be furnished and must be specified. • Pressures to 350 psi (24 bar). • Temperatures from -40° F to +350° F (-40° C to +177° C). • Consult factory for other pressures and temps. Series PBGMB • For PBGMB reels the assembly B bottom wind roller is standard.
PBGMT/PBGMB Power Rewind Reels Hannay LPG Reels
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] 5
S E R I E S
Model Cable Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind inches
m. lb. mm. kg.
O.D. (in) 1" 1-1/2" F O.D. (mm) 25 38 DIRECT O.D. (in) 1.5" 2.16" NET SHIP A B D E F DRIVE G H J K L M X Y O.D. (mm) 38 55 PWR HYD
PBGMT 24-23-24 125 50 168 193 21 15.5 20.5 22.75 29.25 35.12 29.5 12.12 33 36.75 30 31.5 13 16.75 38 15 76 88 533 394 521 578 743 892 749 308 838 933 762 800 330 425
PBGMT 30-23-24 150 75 178 208 27.5 22 20.5 22.75 35.75 41.62 29.5 12.12 33 40.62 36.75 31.5 19.5 16.75 46 23 81 94 699 559 521 578 908 1057 749 308 838 1032 933 800 495 425
PBGMT 28-25-26 200 110 181 211 25.5 20 25.5 24.75 33.75 39.62 33 15.5 34 39 34.75 35 17.5 21.75 61 34 82 96 648 508 648 629 857 1006 838 394 864 991 883 889 445 552
PBGMB 24-23-24 125 50 160 185 21 15.5 20.5 22.75 29.25 35.12 23.5 12.12 49 36.75 30 – 13 16.75 38 15 73 84 533 394 521 578 743 892 597 308 1245 933 762 – 330 425
PBGMB 30-23-24 150 75 170 200 27.5 22 20.5 22.75 35.75 41.62 23.5 12.12 49 36.75 36.75 – 19.5 16.75 46 23 77 91 699 559 521 578 908 1057 597 308 1245 933 933 – 495 425
PBGMB 28-25-26 200 100 191 221 25.5 20 25.5 24.75 33.75 39.62 27.88 15.5 47.75 39 34.75 – 17.5 21.75 61 30 87 100 648 508 648 629 857 1006 708 394 1213 991 883 – 445 552
PBGMB 18-33-34 PBGMT 28-25-26 200 75 175 225 14.5 9.5 31.5 31.75 23.75 29.12 33.62 17.75 56.75 33.5 26.75 – 7 27.75 61 23 79 102 368 241 800 806 603 740 854 451 1441 851 679 – 178 705
Parts Drawing: Both Series PBGMT and Series PBGMB – ISO 18 and ISO 195
For Power Rewind
See Note 3
C 10.5 267
L
Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters. 3. When ordering power rewind models, prefix model number with:
A = Air Rewind–Supplied with control valve and hose. E = Explosion Proof Electric Rewind (1/2 HP)–Supplied with explosion proof switch, solenoid, and junction box. HD = Hydraulic Rewind–Not supplied with control valve. D = Direct Drive Hydraulic Rewind–Not supplied with control valve.
4. Dimension J is maximum, with Guidemaster in operating position. Dimension K is maximum, with Guidemaster in traveling position opposite rewind motor, as shown in dimensional drawing. Dimension L is maximum, with Guidemaster in traveling position on same side as rewind motor.
5. Guidemaster weight is approximately 21 lbs. Guidemasters are shipped as parts.
6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. ***x,y indicate mounting holes.
Series PBGMT
Series PBGMB
192
SWIVEL JOINTS, RISERS, HUB ASSEMBLIES
HANNAY REELS PARTS ID GUIDE
ITEM
C1
C2
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C16
C17
PART
9927.8138
9929.8538
9927.8151
9929.8551
Specify
9930.4210
9930.4610
9936.0642
9930.5703
9936.0659
9929.0501
9930.0531
9901.1600
9901.3760
9965.0024
9965.0025
9901.2840
DESCRIPTION
1/2” 90° MxF Super Swivel (FxF also Avail.) 9927.8551
1” 90° FxF Super Swivel (Buna)
Super Swivel Repair Kit (Specify Size)
1-1/2” 90° FxFxV Swivel (WHJ1590)
1-1/2” Straight FxFxV Swivel (WHJ15180)
1-1/2” PK-1 BUNA-N Packing (Merkel)
1-1/2” Straight Victaulic H-5 Joint
H-5C Rope Packing Seal for H-5 Joint
1” 90° Full Circle Swivel
1-1/2” 90° FxF Full-Circle Swivel
1” FIPT Iron Welded Hub Assembly (Specify Model)
1-1/2” FIPT Iron Flanged Riser
O-Ring for 1-1/2” Risers (2-5/8” Diam.)
O-Ring for 3” Risers (3-3/4” Diam.)
1-1/2” Hub Assy Complete (Specify Model)
ITEM
E3
E4
E5
E6
E7
1-1/2” S.A. Bronze Bearing Complete (E-coated)
1-1/2” S.A. Bronze Bearing Complete (304 S.S.)
1-1/2” S.A. Bronze Bearing Insert
1” S.A. Bronze Bearing insert
C8
C9
C14
C15
C16
C11
ITEM
C1
C2
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C16
C17
PART
9927.8138
9929.8538
9927.8151
9929.8551
Specify
9930.4210
9930.4610
9936.0642
9930.5703
9936.0659
9929.0501
9930.0531
9901.1600
9901.3760
9965.0024
9965.0025
9901.2840
DESCRIPTION
1/2” 90° MxF Super Swivel (FxF also Avail.) 9927.8551
1” 90° FxF Super Swivel (Buna)
Super Swivel Repair Kit (Specify Size)
1-1/2” 90° FxFxV Swivel (WHJ1590)
1-1/2” Straight FxFxV Swivel (WHJ15180)
1-1/2” PK-1 BUNA-N Packing (Merkel)
1-1/2” Straight Victaulic H-5 Joint
H-5C Rope Packing Seal for H-5 Joint
1” 90° Full Circle Swivel
1-1/2” 90° FxF Full-Circle Swivel
1” FIPT Iron Welded Hub Assembly (Specify Model)
1-1/2” FIPT Iron Flanged Riser
O-Ring for 1-1/2” Risers (2-5/8” Diam.)
O-Ring for 3” Risers (3-3/4” Diam.)
1-1/2” Hub Assy Complete (Specify Model)
ITEM
E3
E4
E5
E6
E7
1-1/2” S.A. Bronze Bearing Complete (E-coated)
1-1/2” S.A. Bronze Bearing Complete (304 S.S.)
1-1/2” S.A. Bronze Bearing Insert
1” S.A. Bronze Bearing insert
C8
C9
C14
C15
C16
C11
Bearings
193
ITEM
Not Shown
9910.3128
9910.1321
9910.2100
Specify
DESCRIPTION
12 Volt Flange Mount Non-Exp-Proof Motor 12 Volt Flange Mount Explosion-Proof Motor 12 Volt Base Mount Explosion-Proof Motor Pair of Brushes for 12 Volt Non-Exp-Proof Motor (#572008) Two Pairs of Brushes for 12 Volt Explosion Proof Motor (#572000) Flange Mount Motor Plate for Non-Exp- Proof Motor P66A-00090 Motor Mounting Plate Right Angle for Non-Exp-Proof Motor 10’ Length #35 Chain w/Connecting Link 10’ Length #40 Chain w/Connecting Link Connecting Link for #35 Chain Connecting Link for #40 Chain 138T35 Disc Sprocket, 16-5/8” Diameter (E-Coated) 146T40 Disc Sprocket, 23-1/2” Diameter (E - coated) 112T35 Disc Sprocket, 13-3/8” Diameter (E-coated) 11T35 Motor Sprocket, 3/4” Long 11T35 Motor Sprocket, 1-1/16” Long 11T35 Motor Sprocket, 1-5/16” Long 11T35 Motor Sprocket, 1-3/4” Long Disc & Sprocket for Caliper Brake (#35 Chain) Disc & Sprocket for Caliper Brake (#40 Chain) Molded Chain Guard (left or right)
ITEM B1
Red Dot Internal Switch
#6 Wire Nut (For Red Dot Junction Box)
Insulated “Bug” Connector
CB-2 Mounting Bracket (for Circuit Breaker)
Push-Button 12 Volt Switch (Less Cap)
Rubber Cap (For Push Button Switch)
EPS-1 Switch (Used with Guidemaster)
EPS-2 Mounting Bracket (Used with EPS-1)
Extension Bracket for EPS-2
Not Shown
9910.3128
9910.1321
9910.2100
Specify
DESCRIPTION
12 Volt Flange Mount Non-Exp-Proof Motor 12 Volt Flange Mount Explosion-Proof Motor 12 Volt Base Mount Explosion-Proof Motor Pair of Brushes for 12 Volt Non-Exp-Proof Motor (#572008) Two Pairs of Brushes for 12 Volt Explosion Proof Motor (#572000) Flange Mount Motor Plate for Non-Exp- Proof Motor P66A-00090 Motor Mounting Plate Right Angle for Non-Exp-Proof Motor 10’ Length #35 Chain w/Connecting Link 10’ Length #40 Chain w/Connecting Link Connecting Link for #35 Chain Connecting Link for #40 Chain 138T35 Disc Sprocket, 16-5/8” Diameter (E-Coated) 146T40 Disc Sprocket, 23-1/2” Diameter (E - coated) 112T35 Disc Sprocket, 13-3/8” Diameter (E-coated) 11T35 Motor Sprocket, 3/4” Long 11T35 Motor Sprocket, 1-1/16” Long 11T35 Motor Sprocket, 1-5/16” Long 11T35 Motor Sprocket, 1-3/4” Long Disc & Sprocket for Caliper Brake (#35 Chain) Disc & Sprocket for Caliper Brake (#40 Chain) Molded Chain Guard (left or right)
ITEM B1
Red Dot Internal Switch
#6 Wire Nut (For Red Dot Junction Box)
Insulated “Bug” Connector
CB-2 Mounting Bracket (for Circuit Breaker)
Push-Button 12 Volt Switch (Less Cap)
Rubber Cap (For Push Button Switch)
EPS-1 Switch (Used with Guidemaster)
EPS-2 Mounting Bracket (Used with EPS-1)
Extension Bracket for EPS-2
194
ITEM D1 D2 D3 D4 D5 D6 D7 D8 D9
D10 D11
D12a D12b
Not Shown
D21
9922.0210
9940.0010 9940.0003 9940.0009 9940.0071 9940.0072 9939.1062
DESCRIPTION Top Wind FH-3 Mtg. Brkt. (Specify Model) FH-3 Roller & Spool Assy. (Specify Model) FH-307 Delrin-Over-Steel Step Bolt FH-309-P Black Plastic Cap FH-301 Spool FH-302 Block FH-303-15 (1.5”) Trunnion Bearing FH-303-2 (2”) Trunnion Bearing Utility Hose Roller Assy. “C” (Spec. Model) EH-650 Mounting Block (Plated) EH-714 Roller Assembly HS-3 Hose Stop (Specify OD of Hose) HS-35 Hose Stop For Single Hose (Specify OD of Hose) HS-35 Hose Stop For Twin Hoses (Specify OD of Hose) HS-45 Hose Stop (Specify OD of Hose) GR-4A Guide Arm Positioner GR-4 Guide Arm GR-5 Scoop Cable Guide “R200” Series Roller Assembly “N200” Series Roller Assembly “R300” Series Roller Assembly Roller Mounting Arm (2) per reel (For “N” Series Spring Reels) FH-303 1 1/2“Trunnion Bearing (New Style) (No Through Hole) FH-305 2” SST Roller Tubing 1 1/2” SST Roller Tubing FH-304 Roller Rod LEFT HAND roller mounting block (plated) RIGHT HAND roller mounting block (plated) Assy C2 Roller with 1 1/2” Diam. Roller (Style 2) (Specify Model)
ITEM
G1
G2
G3
G5
G6
G7
G8
G10
G11
G12
G15
G16
G17
G18
9945.0026
9945.0044
9945.0019
9944.0040
9945.0009
9945.0011
9945.1001
9945.1005
9945.1003
9945.1004
9945.0035
9945.0036
9945.0037
9939.0069
DESCRIPTION
GM-609 Roller w/GM Bearing
GM Mounting Yoke w/Bronze Bushing
GM Oil-Impregnated Bronze Bushing
GM Roller Mtg. Bolts
GM Cross Member Assembly (3 Pieces) (Specify Model)
GM Bottom-Wind Brackets (Pair)
GM Top-Wind Brackets (Pair)
D1
D2
ITEM D1 D2 D3 D4 D5 D6 D7 D8 D9
D10 D11
D12a D12b
Not Shown
D21
9922.0210
9940.0010 9940.0003 9940.0009 9940.0071 9940.0072 9939.1062
DESCRIPTION Top Wind FH-3 Mtg. Brkt. (Specify Model) FH-3 Roller & Spool Assy. (Specify Model) FH-307 Delrin-Over-Steel Step Bolt FH-309-P Black Plastic Cap FH-301 Spool FH-302 Block FH-303-15 (1.5”) Trunnion Bearing FH-303-2 (2”) Trunnion Bearing Utility Hose Roller Assy. “C” (Spec. Model) EH-650 Mounting Block (Plated) EH-714 Roller Assembly HS-3 Hose Stop (Specify OD of Hose) HS-35 Hose Stop For Single Hose (Specify OD of Hose) HS-35 Hose Stop For Twin Hoses (Specify OD of Hose) HS-45 Hose Stop (Specify OD of Hose) GR-4A Guide Arm Positioner GR-4 Guide Arm GR-5 Scoop Cable Guide “R200” Series Roller Assembly “N200” Series Roller Assembly “R300” Series Roller Assembly Roller Mounting Arm (2) per reel (For “N” Series Spring Reels) FH-303 1 1/2“Trunnion Bearing (New Style) (No Through Hole) FH-305 2” SST Roller Tubing 1 1/2” SST Roller Tubing FH-304 Roller Rod LEFT HAND roller mounting block (plated) RIGHT HAND roller mounting block (plated) Assy C2 Roller with 1 1/2” Diam. Roller (Style 2) (Specify Model)
ITEM
G1
G2
G3
G5
G6
G7
G8
G10
G11
G12
G15
G16
G17
G18
9945.0026
9945.0044
9945.0019
9944.0040
9945.0009
9945.0011
9945.1001
9945.1005
9945.1003
9945.1004
9945.0035
9945.0036
9945.0037
9939.0069
DESCRIPTION
GM-609 Roller w/GM Bearing
GM Mounting Yoke w/Bronze Bushing
GM Oil-Impregnated Bronze Bushing
GM Roller Mtg. Bolts
GM Cross Member Assembly (3 Pieces) (Specify Model)
GM Bottom-Wind Brackets (Pair)
GM Top-Wind Brackets (Pair)
D1
D2
195
REWIND ASSEMBLIES, BRAKES, RATCHETS ITEM
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
Not Shown
Not Shown
Spec. Model
9947.0043
9947.0130
9922.0008
9922.0301
9922.0302
9922.0311
9922.0322
DESCRIPTION 30° Rewind Bracket (specify right or left) Vertical Rewind Bracket Only H-26 Ring Gear H-28 Ring Gear H-27 Pinion Gear H-29 Pinion Gear Pinion Shaft Pinion Shaft Collar Pinion Gear Guard (E-Coated) H-2A Pinion Shaft Bearing H-30A Brake Wheel H-31 Brake Spring H-3 Brake Pad H-18 Hand Crank Air Caliper Brake Manual Caliper Brake Pair of Brake Pads (For Air Caliper Brake) Comet Brake Strap Only (IV Style) Comet Brake Iron Hub (IV Style) Ratchet Wheel (new 2 position) PL-1 Pinlock PL-4 Pinlock with Extended Mounting Ears Comet Brake Assembly (Bearing Mounted Style)
Comet Brake Assembly (Bearing Mounted Style with Stub Shaft)
Cam Lever Drag Brake Kit 3-Position Lever (including mounting hardware)
Ratchet Locking Spring
Left Hand Pawl & Pin (304 SST)
Right Hand Pawl & Pin (304 SST)
Left Hand Ratchet Locking Assy for HGR, SCR, SGCR, Reverse N-Series
Right Hand Ratchet Locking Assy for N-series Left Hand Ratchet Locking Assy for Rollform Reels
Right Hand Ratchet Locking Assy for Reverse Rollform Reels
F1
F10
F14
Hannay Reels, Inc., 553 State Route 143 Westerlo, New York 12193 Telephone 518-797-3791 Toll Free 1-877-GO-Reels (467-3357) FAX 1-800-REELING (733-5464) INT’L FAX (518) 797-3259 Website: www.hannay.com E-mail: [email protected]
F12
F13
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
196
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
197
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
198
199
Hannay Reels, Inc., 553 State Route 143 Westerlo, NY 12193 Telephone 518-797-3791; Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) INT’L FAX (518) 797-3259 Website: www.hannay.com E-mail: [email protected]
ISO 115 PARTS LIST
Hannay ISO Parts Lists are available at www.hannay.com
ROLLER MOUNTING BRACKET (PRESSED FRAME & ROLL FORM FRAME)
ROLLER MOUNTING BRACKET (TRAPEZOIDAL FRAME)
ASSEMBLY “A” OR “A2”
ASSEMBLY “B” OR “B2”
ASSEMBLY “C” OR “C2”
PARTS LIST ISO 115
Item No. Description PART NUMBER Quantity Utillity Roller Parts:
25b 3/8" - 16 x 1-1/4" Spinlock Bolt ...................................................................... 9904.2203 2 25c 3/8" - 16 x 1-1/2" Spinlock Bolt ...................................................................... 9904.2204 2 27 3/8" - 16 Spinlock Nut ................................................................................... 9904.6200 4 70a Assembly "C2" Mounting Block (Left) ............................................................ 9940.0071 2 70b Assembly "C2" Mounting Block (Right) .......................................................... 9940.0072 2 – Assembly "C" Mounting Block (Universal)....................................Not Shown 9940.0076** 4
70c Trunion Bearing Short - 1-1/2" ....................................................................... 9940.0007 4 70d Trunion Bearing Long - 1-1/2" ........................................................................ 9940.0016 4 81a 1/2" x 1-3/4" SST Roller Rod ......................................................................... 9940.0015 4 81b 1/2" x (Specify Roller Length) SST Roller Rod .............................................. 9940.0009 2 91 1-1/2" O.D. x (Specify Roller Length) SST Roller Tubing ............................. 9940.0003 4
Complete Utility Roller Assemblies:
Assembly "A" Rollers -- Complete .........................................Specify Length 9939.0060 Assembly "B" Rollers -- Complete .........................................Specify Length 9939.0061 Assembly "C" Rollers -- Complete .........................................Specify Length 9939.0062
Roller Mounting Bracket Parts -- (Pressed Frame & Roll Form Frame):
25a 3/8" - 16 x 1" Spinlock Bolt............................................................................. 9904.2202 4 27 3/8" - 16 Spinlock Nut .................................................................................... 9904.6200 4 70e Top Wind Welded Cross Brace ...............................................Specify Model 9941.0046 1 70f Top Wind Vertical Upright -- (with provision for crank) ............Specify Model 9941.0037 1 70g Top Wind Vertical Upright -- (No provision for crank)..............Specify Model 9941.0036 1
– Top Wind Mounting Bracket - Assy B & B2 -- Complete .........Specify Model 9941.0041 – Top Wind Mounting Bracket - Assy C & C2 -- Complete.........Specify Model 9941.0040
Roller Mounting Bracket Parts -- (Trapezoidal Frame):
70h Top Wind Cross Member Brace ..............................................Specify Model 9941.0034 1 70j Top Wind Mounting Brackets (Pair).........................................Specify Model 9941.0033 1
– Top Wind Mounting Bracket - Assy C & C2 -- Complete.........Specify Model 9941.0035 1
BE SURE TO SPECIFY COMPLETE MODEL NUMBER and SERIAL NUMBER OF REEL. USE PART NUMBER!
When ordering parts
3M HP 3-10 H-8511-P Rev. 11
** Note: If Assembly "A", "B", or "C" is chosen instead of Assembly "A2", "B2", or "C2", the mounting block part number changes to 9940.0076
Hannay Reels, Inc., 553 State Route 143 Westerlo, NY 12193 Telephone 518-797-3791; Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) INT’L FAX (518) 797-3259 Website: www.hannay.com E-mail: [email protected]
ISO 115 PARTS LIST
Hannay ISO Parts…