Image: Stokkete/shutterstock.com

www.makerlabs.ovgu.de

2

The MakerLabs at Otto von Guericke University Magdeburg are ego.-INCUBATORS funded by the state of Saxony-Anhalt. In the prototype and startup workshops, students and research assistants from any university, non-university research institutions, and universities of applied sciences in the state of Saxony-Anhalt can familiarise them-selves with equipment, technologies/procedures, and organisational workflows in practice and advance their own ideas to the point of setting up in business.

BACKGROUND

WHERE DO I FIND THE RIGHT LAB?

CONTACT

Otto von Guericke University Magdeburg Transfer and Entrepreneur Centre | Incubator Officer: Dr. Ingo Böhlert | G18, Room 507 Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-57056 | ingo.boehlert@ovgu.de | www.makerlabs.ovgu.de

REQUIREMENTS FORPARTICIPATION

Image: OVGU

(G) IP-LogMoLogistics & MobilityMachinery Room 11.2

(H) Performance LabDiagnostic & Training EquipmentSports Hall 2, Test Room 2

(I) Transfer and Entrepreneur Centre (TUGZ)Services for start-ups, entrepreneurs, and scientists | G18, 5. OG

(D) FinTechFinancial ServicesG22A, Room 004

(E) FLEXtronicFlexible Printed BoardsATTENTION: CHANGE OF LOCATION!

(F) InnoLab IGT Medical TechnologyUniversity Hospital | Block 65, Zenit 1

(A) ADDITIV+Metal 3D PrintingG12, Room 005

(B) AWI-LabWork Sciences LaboratoryG10, Room 043

(C) FabLabRapid PrototypingG12, Room 005

• Idea for a new product, a new service or an innovative process

• Project presentation with objectivesand timeframes

• Students or research assistantsat a university or academic institutions in the state of Saxony-Anhalt

• Not pursuing a commercial activity

WHERE DO I FIND THE RIGHT LAB?Campus Universitätsplatz

3

CONTACT

Otto von Guericke University Magdeburg Institute of Process Technology and Quality Management | G12, Room 005Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-52808 | fablab-inkubator@ovgu.de | www.tugz.ovgu.de/additiv

Manufacturing laboratory for the production of functional prototypes

With its Selective Laser Melting system, Additiv+ provides the oppor-tunity to manufacture fatigue endurable and heavily stressed compo-nents from steel, aluminium, CoCr or even titanium. The lab targets the fields of mechanical engineering, materials engineering and medical technology. The provision of surface finishing equipment and optical measuring devices enables continuous quality control.

Images: OVGU

ADDITIV+

POSSIBILITIES/FACILITIESBACKGROUND• Additive manufacturing in metals• Residual stress measurement via

x-ray diffractometer• Surface analysis with confocal microscope• Vibratory finishing system• Drag finishing system• Electropolishing equipment

AWI-Lab — WORK SCIENCES LABORATORYSupport for startups in the “Innovative Working Environment 4.0” thematic area

Image: Jana Dünnhaupt/OVGU

4

BACKGROUNDAssembly 4.0:• Collaborative Robot (Rethink

Robotics: Sawyer)• Motion capture system

(Xsens: MVN Link) • Camera- and sensor-supported

assembly workstations

Healthcare 4.0:• Exoskeleton (German Bionic: Cray X)• Smart floor (Future Shape:

SensFloor)

Collaboration 4.0:• AR-/VR-Technology (Microsoft:

Hololens, Samsung: Odyssey• 360°-3D-Camera (Insta360: Pro 2)• Various digital aids (tablets, smartphones, smartwatches)

The AWI-(Work Sciences-) Lab provides the infrastructure for developing and testing innovative product, process, and service solutions in the “Working Environment 4.0” field. Under the expert supervision of the Department of Work Science, interested students are given the opportunity to make their business ideas reality within the pre-startup phase. Oriented towards the key markets of Machine and Plant Construction and Healthcare and Nursing, the focus in the AWI-Lab is on the different possibilities for the respective scenarios.

CONTACT

Otto von Guericke University Magdeburg Institute of Ergonomics | G10, Room 415 Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-52604 | awilab@ovgu.de | www.tugz.ovgu.de/awilab

POSSIBILITIES/FACILITIES

Manufacturing laboratory for the production of display and functional models

The FabLab is the Swiss Army knife of the Maker Labs. Equipped with a multitude of digital and conventional manufacturing machines, the FabLab is ideal for low to mid-threshold product developments in the fields of mechanical engineering and mechatronics. Based on the first FabLab of Professor Neil Gershenfeld, the prototype workshop strives to adjust to the needs of users continually and to implement new manufacturing potential from the maker and hacker scene into its own machinery pool.

FabLab — FABRICATION LABORATORY

Images: Chris Rößler/OVGU

5

BACKGROUND

CONTACT

Otto von Guericke University Magdeburg Institute of Process Technology and Quality Management | G12, Room 005Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-52808 | fablab-inkubator@ovgu.de | www.tugz.ovgu.de/FabLab

• Rapid Prototyping via 3D printing (FFF/FDM, SLA, Polyjet)

• CNC milling and turing• Water jet cutting • Laser cutter• Hand tools and assembly workstations• Rapid tooling and manufacturing

via injection moulding machine• Small soldering workstation• Various electrical hand tools• CAD and CAM workstations• 3D scanning via a hand scanner

POSSIBILITIES/FACILITIES

FinTech — FINANCIAL TECHNOLOGYReal-world laboratory at the interface between technology and finance

The FinTech — Financial Technology Maker Lab is a real-world laboratory for the development and testing of innovative concepts and potential solutions. In future, the progressive digitalisation and increasing acceptance of cryptocurrencies, especially blockchain technology, will have a considerable influence on the real industrial and banking sectors. The aim of the FinTech lab is to support the development of relevant new product and service ideas in the field of financial technologies. To this end, the use of state-of-the-art hardware and software applications is consistently advanced.

Images: Guido Henkel

6

BACKGROUND• Development and use of

blockchain/smart contract system solutions

• SIX Financial Service (Zurich) capital market licence

• MATLAB/Simulink(1 x commercial licence)

• Prototype solar plant Smart Grid/Smart Metering

• 8 PC work areas plus a dual- monitor PC workstation for

commercial use• Raspberry Pi 4• 2 x high-performance computers for

deep learning and AI applications

CONTACT

Otto von Guericke University Magdeburg Chair of Business Administration, esp. Innovation and Financial Management & Innovation Finance | G22A, Room 004 Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-50170 | fintech@ovgu.de | www.tugz.ovgu.de/Fintech

POSSIBILITIES/FACILITIES

7

Manufacturing laboratory for printed circuit boards and electronics

FLEXtronic

Images: OVGU

BACKGROUND

CONTACT

Otto von Guericke University Magdeburg Transfer and Entrepreneur Centre | G18,| Room 508Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-57049 | jonas.crackau@ovgu.de | www.tugz.ovgu.de/Flextronic

Attention: Change of Location!

From January 2020 FLEXtronic is moving to its new building in the 'Science Harbour' ('Wissenschaftshafen').

For enquiries and registration please contact the TUGZ directly during this time. Your contact person during this period is Dipl.-Wirtsch.-Ing. Jonas Crackau.

An overview of the equipment and machinery available in the laboratory can be found here: www.tugz.ovgu.de/Flextronic.html

INNOLAB IGT — IMAGE GUIDED THERAPY

The concept of the InnoLab IGT (Image Guided Therapy) Maker Lab follows a combination of “design thinking” and the BIODESIGN concept from Stanford University (identify, invent and implement) of so-called “unmet clinical needs”. Initially, the NEEDS are identified in close cooperation with clinical users. Then a subsequent translation of ideas for possible solutions are devised and tested for practical suitability in the IGT incubator. In addition to creative office for brainstorming, a lab for electronics and prototyping, there is a simulations operating room for test and evaluation.

Images: Chris Rößler/OVGU

8

BACKGROUNDSimulations Operating Room:• Endoscopy (Olymus)• Ultrasound (Clarius, GE, Well.D)• Tracking (Brainlab)• Navigation (Piur Imaging)• RF Generator• Robotic arms (Franka Emika)Prototyping Lab:• 3D printing• Tools for mechanical and electronic

processing • Measurement and test benchs• Phantomes/phantom constructionCreative Office:• Individual and group workstations• Smartboard• PCs

CONTACT

Otto von Guericke University Magdeburg Faculty of Medicine| Block 65, Zenit 1Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-57037 | igt-innolab@ovgu.de | www.tugz.ovgu.de/igt

Innovation laboratory for the development of tools and equipment for image guided therapy

POSSIBILITIES/FACILITIES

IP-LogMoIntelligent prototypes for logistics and mobility

The IP-LogMo – Intelligent Prototypes for Logistics and Mobility – MakerLab has portable machine tools, a very well-equipped prototype assembly area for aluminium and steel processing, plus a prototype workshop with hand tools. The MakerLab provides the conditions for producing prototypes for intelligent transport and mobility solutions as well as for intralogistics, for example.

Images: Judith Zadek/OVGU, Chris Rößler/OVGU

9

BACKGROUND

CONTACT

Otto von Guericke University Magdeburg Institute of Logistics and Material Handling Systems | Machinery Hall 11.2Universitätsplatz 2 | D-39106 Magdeburg +49 391 67-52240 | iplogmo@ovgu.de | www.tugz.ovgu.de/ip-logmo

Countless possibilities for metal and wood processing, including: • Aluminium- & steel welding• Grinding of tubes and sheet plates• Chamfering of sheet plates• Bending of tubesVarious machines for tube, sheetand wood processing, including:• combined tube, profile and belt

sander• Notching machine• Folding machine/sheet metal

bender • Pipe bending machine• Routing machine• Plasma cutter• Workshop/indoor cranes• Lifting table and workbenches

POSSIBILITIES/FACILITIES

Workspace & laboratory for testing and development of innovative ideas in the field of human performance

Performance Lab

Images: Harald Krieg/OVGU

10

BACKGROUND

The Performance Lab offers the infrastructure for testing and developing innovative methods as well as diagnostic and workout devices for measuring and/or enhancing human physical capabilities. The laboratory's objective is to support the founding of ventures offering products or services in the field of human performance.

Neurophysiology and Perception:• Neuro-feedback (HEG)• Mobile EEG• Eye tracking

Psychological Diagnostics:• Concentration tests• Intelligence tests

Sports Science Diagnostics:• Electromyography (EMG)• Motion capturing• Biofeedback – breathing sensor

technology• Lactate measurement• Functional movement screening• Heart rate variability & ECG

CONTACT

Otto von Guericke University Magdeburg Institute 3 - Sports Science Zschokkestr. 32 | D-39104 Magdeburg +49 391 67-57343 | performancelab@ovgu.de | www.tugz.ovgu.de/performancelab

POSSIBILITIES/FACILITIES

Services for start-ups, entrepreneurs, and scientists

TRANSFER AND ENTREPRENEUR CENTRE

Image: Shutterstock

11

BACKGROUND

The Transfer and Entrepreneur Centre at Otto von Guericke University Magdeburg coordinates the knowledge and technology transfer of the university and in particular has the objective of transferring high-potential research findings into the regional and national economy and making them accessible for all market participants. It facilitates contacts and markets the results of research. Furthermore, it supports spin-off companies in all stages of the startup process.

CONTACT

Otto von Guericke University Magdeburg Transfer and Entrepreneur Centre | Leader: Dr. Gerald Böhm | G18, 5. OGUniversitätsplatz 2 | D-39106 Magdeburg +49 391 67-57777 | tugz@ovgu.de | www.tugz.ovgu.de

• Individual consultancy on startup matters

• Upskilling through trainingsessions, workshops and coachings

• Creative workspace throughvarious coworking programmes

• Application for property rights and exploitation of research results• Marketing of innovations at trade

fairs and exhibitions • Facilitating partner contacts via

networking events, specialist conferences, competitions

• Coordination of the OVGU MakerLabs

POSSIBILITIES/FACILITIES

IMPRESSIONS

Images: Harald Krieg/OVGU, Chris Rößler/OVGU12

13

Images: Harald Krieg/OVGU, Stefan Berger/OVGU, Chris Rößler/OVGU

IMPRESSIONS

IMPRINT

Published byOtto von Guericke University MagdeburgTransfer and Entrepreneur CentreUniversitätsplatz 239106 Magdeburg (Germany)

Editor/Layout: Transfer and Entrepreneur CentreCirculation: 500

+49 391 67-57777tugz@ovgu.de www.tugz.ovgu.de www.facebook.com/TUGZOVGU www.twitter.com/tugz_ovguwww.instagram.com/tugz_ovgu_magdeburg

Rev 1. Last updated 03/2020, subject to alterations.

Magdeburg

Dessau-Roßlau

Halle (Saale)

Merseburg

Bernburg

14

Magdeburg-Stendal University of Applied Sciences• Competence in Quality (Magdeburg)• Medical Technology (Magdeburg)• Materiacl Surfaces (Magdeburg)• Friction Welding / Industry 4.0 (Magdeburg)

Anhalt University of Applied Sciences • Image.Knowledge.Gestaltung (Dessau-Roßlau)• Hybrid AR-VR Lab (Bernburg)• User Experience and Resilience (Bernburg)

14

Martin Luther University Halle-Wittenberg• Startup Workshop Life Sciences (Halle/Saale)• Startup Workshop NanoWerk (Halle/Saale)• Incubator IT & Media (Halle/Saale)• Incubator Nutrition & Agricultural Technology (Halle/Saale)

Merseburg University of Applied Sciences• Startup Workshop Rapid Prototyping

Otto von Guericke University Magdeburg• Additiv+• AWI-Lab• FabLab• FinTech• FLEXtronic• InnoLab IGT• IP-LogMo• Performance Lab

OVERVIEW OF ALL ego.-INCUBATORS IN THE STATE OF SAXONY-ANHALT

Hurg-Stendal

The laboratory is used to develop new surface properties (area for modern technical measuring technology).

The laboratory aids the creation of optimum process chains in medical technology.

The laboratory makes available resources for specific surface technology and diagnostics.

A modern friction welding centre with industry skills 4.0-compatible integration of operating data is available in the laboratory.

An

The aim of the Image.Knowledge.Gestaltung ego.-INCUBATOR is to realise applications, equipment and methods in the context of data and image acquisition.

The Hybrid Environment and Product Visualisation using Augmented, Mixed and Virtual Reality Technologies ego.-INCUBATOR is a laboratory for the development of services (through to applications) in these areas.

The User Experience and Resilience ego.-INCUBATOR supports startups for the development and quality improvement of technical products and systems in terms of their user-friendliness and sustainability.

Wittenberg

The equipment in the laboratories in the Life Sciences Startup Workshop, includes the following: Electrophoresis machines, flow cytometers, plate washers/plate readers, PCR and gel documentation.

In the NanoWerk startup workshop, the well-equipped laboratories contain, among other things, a combined atomic force microscope/scanning tunnel microscope (AFM/STM), a near-field optical microscope, a microscope camera and an ion beam preparation tool.

The equipment in the IT and Media Workshop enables users to develop and test their own products for virtual and augmented reality applications and in the field of artificial intelligence/robotics as well as for 3D cinema, and to carry out acceptance studies.

In the field of nutrition and agricultural technology, laboratories are equipped for the development and manufacture of food prototypes and their analysis.

Wittenberg

In the laboratory techniques and technologies are provided for product development in the fields of art and design, architecture and engineering.

Wittenberg1515

OVERVIEW OF ALL ego.-INCUBATORS IN THE STATE OF SAXONY-ANHALT

Magdeburg-Stendal University of Applied Sciences

Competence in Quality

Medical Technology

Material Surfaces

Friction Welding / Industry 4.0

Anhalt University of Applied Sciences

Image.Knowledge.Gestaltung

Hybrid AR-VR Lab

User Experience and Resilience

Martin Luther University Halle-Wittenberg Startup Workshop Life Sciences

Startup Workshop NanoWerk

Incubator IT & Media

Incubator Nutrition & Agricultural Technology

Merseburg University of Applied Sciences

Startup Workshop Rapid Prototyping

Otto von Guericke University Magdeburg

MakerLabs (Page 2-10)

Hereinspaziert in unsere MakerLabs

REGELMÄSSIGE SPRECHZEITENMONATLICHE FÜHRUNGEN

Image: Stokkete/shutterstock.com

Come and develop in our MakerLabs

www.makerlabs.ovgu.de