HobartBrochure
-
Upload
canyon-fleet-outfitters -
Category
Documents
-
view
212 -
download
0
description
Transcript of HobartBrochure
Material Thickness Range (Mild Steel)
Material Thickness Range (Mild Steel)
Material Thickness Range (Mild Steel)
1/8 in. 1/4 in.
Material Thickness Range(Mild Steel)
1/8 in. 1/2 in.
Material ThicknessRange (Mild Steel)
RECEPTACLES:! (4) 120 V, 20 A; (1) 120/240 V, 50 A;
(1) 240 V, 50 A
PROCESSDC STICK: steel,stainless steel, cast iron
PROCESSAC/DC STICK: steel,stainless steel, cast iron
All-Purpose Running Gear#300396For Champion ELITE
CHAMPION® 145 CHAMPION® ELITE
145 Amp DC Welder/4500 Watt AC Generator
#500544 23 HP Kohler
All-in-One 225 Amp AC/DC Welder/11,000 Watt AC Generator
WELDER/GENERATORS
20 A,120 V
50 A,240 V
50 A,120/240 V
Weld Output (AC) 50–225 A, (DC) 50–210 A
Duty Cycle (AC) 100% @ 225 A, (DC) 100% @ 210 A
Our Champion line of Welder/Generatorsprovides you with the power you needwherever and whenever you need it. Withup to 11,000 watts of generator power youwill never be in the dark again.
RECEPTACLES:! (2) 120 VAC, 20 A GFCI,
(1) 240 VAC
Features standard 12-gal. fuel tank.Cables not included.
Features standard 6.25-gal. fuel tank. Cables not included.
#50055510 HP Briggs & Stratton Intek
Weld Output 40–145 A
Duty Cycle 30% @ 130 A
ProtectiveWeatherproof Cover#770714 For Champion 145
Protective Cover#770619 For Champion ELITE
WELDER/GENERATOR Accessories
14-50P-6-50R Adaptor Cord #770674
230 V, 20 ft. Extension Cord #770644
No. 2 Stick Cable Set 50 ft. #195195 For Champion 145 and ELITE
No. 4 Stick Cable Set 20/15 ft. #193067 For Champion 145 and ELITE
115 or 230 Volt 230 Volt115 VoltPlasma cutters use an electricalarc and compressed air to cutsteel, aluminum and otherconductive metals. Hobart’sAirForce™ models deliver amazingresults at an affordable price.
AIRFORCE® 500i AIRFORCE® 700i
INCLUDES:! 16.4-ft. (5 m) HP-25
hand-held torch and workcable with clamp
! 7-ft. (2.1 m) power cordwith 115 VAC, 20 A plug
! Built-in air compressorwith filter
! 2 extra electrodes, 2 extra tips, 1 wrench and 1 standoff guide
AIRFORCE® 250ci
#500534 #500548 #500546
INCLUDES:! 16.5-ft. (5 m) hand-held torch
and work cable with clamp! 10-ft. (3 m) power cord with
230 VAC plug! Built-in gas/air filter and
regulator! 2 extra electrodes, 2 extra
tips, 1 wrench, 1 standoff guide and 1 air fitting
1/8 in.Rated Cut
1/4 in.
Max. Cut
Material Thickness Range(Steel)
3/8 in.
Rated Cut
5/8 in.
Max. Cut
Material ThicknessRange (Steel)
1/2 in.
Rated Cut
7/8 in.
Max. Cut
Material Thickness Range(Steel)
Material Thickness Range(Mild Steel)
24 ga. 1/2 in.24 ga. 3/16 in.
Material Thickness Range (Mild Steel)
18 ga. 3/16 in. 24 ga. 1/4 in. 24 ga. 5/16 in.
Material Thickness Range(Mild Steel)
24 ga. 3/8 in.
Output Amperage 30 –125 A
Duty Cycle 20% @ 85 A
Output Amperage 25 –140 A
Duty Cycle 20% @ 90 A
115 Volt 115 or 230 Volt
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Flux-cored wire onlyno gas required
INCLUDES:! 8-ft. (2.4 m) gun assembly! 10-ft. (3 m) work cable with clamp ! Sample spool of .030-in. flux-cored wire! Extra .030-in. contact tips! Weld set-up chart
MIG Accessories
INCLUDES:! 10-ft. (3 m) gun assembly
and work cable with clamp! Sample spool of .030-in.
flux-cored wire! 8-in. (203 mm) spool adapter! Dual-gauge regulator! Gas hose, extra
.030-in. contact tips
INCLUDES:! 10-ft. (3 m) gun assembly
and work cable with clamp! Sample spool of .030-in.
flux-cored wire! 8-in. (203 mm) spool adapter! Dual-gauge regulator! Gas hose, extra
.030-in. contact tips
Output Amperage 25 –190 A
Duty Cycle 30% @ 130 A
Output Amperage 25 – 210 A (230 V), 25 –140 A (115 V)
Duty Cycle 30% @ 150 A (230 V), 20% @ 90 A (115 V)
115 Volt
#500521 #500500
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Flux-cored wire,no gas required
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Solid wire, shielding gas
OR APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Flux-cored wire,no gas required
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Solid wire, shielding gas
OR APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Flux-cored wire,no gas required
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Solid wire, shielding gas
OR
230 Volt
#500554 #500553
HANDLER® 140 HANDLER® 190 HANDLER® 210 MVP
INCLUDES:! 10-ft. (3 m) gun assembly
and work cable with clamp! Sample spool of .030-in.
flux-cored wire! 8-in. (203 mm) spool adapter! Dual-gauge regulator! Gas hose, extra
.030-in. contact tips
Most Powerful115V Welder
OurEZ DialJust Set and Weld!
Output Amperage 30 –125 A
Duty Cycle 20% @ 85 A
INCLUDES:! 8-ft. (2.4 m) gun assembly! 10-ft. (3 m) work cable
with clamp ! Sample spool of .030-in.
flux-cored wire! Extra .030-in. contact tips! Weld set-up chart
115 Volt
#500495
HANDLER® 125
MIG ReadyWith Built-in Gas Valve
230 Volt
IRONMAN™ 230
#500536
INCLUDES:! 15-ft. (4.6 m) gun assembly ! 10-ft. (3 m) work cable with clamp! Built-in running gear/
cylinder rack! Dual-gauge regulator! Gas hose, extra
.030-in. contact tips
WIRE FEED WELDERS
HANDLER® 125 EZ ™
Output Amperage 30–250 A
Duty Cycle 60% @ 175 A
Protective Cover#195186 For Handler models
Protective Cover#770589For IronMan models
Running Gear/Cylinder Rack #770187For Handler models and EZ-TIG 165i
Small Running Gearw/Cylinder Rack #194776For Handler models
DP 3545-20 Spool Gun #30034920 ft. (6 m) cable.For IronMan 230 only (direct connection)
SpoolRunner™ 100 Spool Gun #30079610 ft. (3 m) cable. Includes rugged plastic carrying case.For Handler 190 and 210 MVP (direct connection)
Material Thickness Range(Mild Steel)
18 ga. 5/16 in.
TREK® 180
#500539
INCLUDES:! 10-ft. (3 m) gun assembly and work
cable with clamp! Sample spool of .030-in. flux-cored wire! Extra .030-in. contact tips! 115 V, 4-ft. (1.2 m) cord for
recharging the unit! (2) 12 V integrated batteries
Output Amperage 25–180 A
Duty Cycle 20% @ 120 A
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Flux-cored wire,no gas required
Solid wire, shielding gasOR APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
MIG (GMAW)! Use solid wire and
shielding gas(required)
! Better control withthin metals
! Cleaner welds! Welds steel, stainless
and aluminum
FLUX-CORED (FCAW)! Use flux-cored wire
(no gas required)! Great for outdoor use! Deep weld penetration! Welds steel including
dirty, rusted orpainted
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Hobart’s line of wire feed welders are designed for easy operation withprofessional results. Our Handler® seriescomes ready-to-weld with flux-coredwire, out of the box.
Material ThicknessRange (Mild Steel)
1/8 in. 1/2 in.
(DC) 1/4 in.
Material ThicknessRange (Mild Steel)
1/8 in. 3/8 in.
230 Volt
STICK WELDERS
230 Volt 230 VoltThe Hobart Stickmate® is the top performer in its class, with a model to fit your budget andwelding application.
The EZ-TIG™165i is a completeAC/DC TIG welding package.All you need is a bottle ofargon shielding gas and youare ready to start welding.
STICKMATE® 235 AC/DC
INCLUDES:! 15-ft. (4.6 m)
electrode cable with holder
! 10-ft. (3 m) workcable with clamp
! 5-ft. (1.5 m)power cord with plug
Single-Phase AC/DC Welding Package
INCLUDES:! 12.5-ft. (3.8 m) 150 A
TIG torch! 12-ft. (3.7 m) work cable
with clamp! Gas regulator, flowmeter
and shielding gas hose! RFCS-RJ45 Foot Control
INCLUDES:! 15 ft. (4.6 m)
electrode cable with holder
! 10-ft. (3 m) workcable with clamp
! 5-ft. (1.5 m) powercord with plug
STICKMATE® 205 AC & 235 AC
Output Current (205) 30–205 A (235) 30–235 A
Duty Cycle (205) 20% @ 165 A (235) 20% @ 225 A
Output Current (AC) 30 –235 A, (DC) 30–160 A
Duty Cycle (AC) 20% @ 225 A, (DC) 20% @ 150 A
#500502 Stickmate 205 AC#500420 Stickmate 235 AC
AC Stick (SMAW)Arc WeldingPower Source
#500421
AC/DC Stick(SMAW) Arc WeldingPower Source
TIG AccessoriesSTICK Accessories
Running Gear #043927Mounts easily to unit andprovides convenient portability.Includes two wheels, two feetand a handle.
EZ-TIG™ 165i
Material Thickness Range(Aluminum)
3/16 in.
INCLUDES:! 16.5-ft. (5 m) hand-held torch
and work cable with clamp! 10-ft. (3m) power cord with
115 VAC, 15 A and 230 VAC, 50A plug adaptors
! Built-in gas/air filter andregulator
! 2 extra electrodes, 2 extra tips, 1 wrench, 1 standoff guide and 1 air fitting
C02 Kit #770626For Handler modelsexcept Handler 125 EZ
PROCESSTIG: most metals150 A, 16 V (DC/AC) at 20% Duty CycleOutput Amperage 10–165 A
#500551
RCCS-RJ Remote Contactor and CurrentControl #770669
Up-and-down rotary-motion fingertip control. Great for applications that require finer amperagecontrol. Includes 28-ft. (8.5 m) control cord with RJ connector.
22 ga.
PLASMA CUTTERS
Air CompressorBuilt-in
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
Flux-cored wire,no gas required
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Solid wire, shielding gas
OR
Spool GunReady!
115 or 230Volts!
Works on Either
For Use withOptionalSpoolRunner™ 100
TIG WELDERS
Spool Gun Readyfor OptionalSpoolRunner™ 100
Easy to UsePowerful and
Battery-PoweredMIG Welding Package
APPLETON, WI
.030"GaslessFlux-Cored WireAlambre con núcleo de fundente que no usa gasFil fourré pour soudage sans gaz
HobartWelders.com1-800-626-9420 Technical Help
Part No. H222106-R19
Made in USA
Net Wt. 2 lb Alloy E71T-11 AWS A5.20
APPLETON, WI
.024"MIGSolid WireAlambre sólido MIG Fil plein pour soudage MIG
HobartWelders.com1-800-626-9420 Technical Help
Part No. H305401-R19
Packaged in USA
Net Wt. 2 lb Alloy ER70S-6 AWS A5.18
Flux-cored wire,no gas required
Solid wire, shielding gasOR
A Trifold Broch INS-145_Trifold Broch Ins.qxd 8/30/11 10:40 AM Page 1