High-productivity Compact Turning Center Added with Y … 220, 220L... · High-productivity Compact...
Transcript of High-productivity Compact Turning Center Added with Y … 220, 220L... · High-productivity Compact...
High-productivity Compact Turning Centerwith Y-axis Based on Lynx Series
Lynx Y series addition of stable and rigid Y-axis based on Lynx model makes possible to
complete machining in 1 set-up. The longest Y-axis off-center machining is available, and
through reducing cycle time and non cutting time provides your productivity improvement.
LM guide structure makes high precision and speed, so this helps machining ability.
Also, new Doosan operation panel designed ergonomically provides convenience.
02
03
Features
Operation Convenience
New Doosan operation panel designed ergonomically and 10.4” color LCD provides convenient operation for operators
3
Added with Y-axis
The addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity.
1
High productivity
All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity.
2
X-axisY-axis
Z-axis
04
In the Y-axis plane, tools can move in a plus or minus direction perpendicular to the Z-axis and spindle center line. Viewed from the operator's perspective, this Y-axis motion is toward or away from the door of the machine while X-axis moves from floor to ceiling. Y-axis enables various shape of cutting. Y-axis is realized virtually by the linear interpolation and synchronous movement of X1 and X2-axis that make it possible to lower machine height for stability.
Virtual Y-axis function Y SY LSY
105 (±52.5) mm (4.1 (±2.1) inch)Y-axis travel distance
10 m/minY-axis rapid traverse rate
Added with Y-axisThe addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity.
Simultaneous XYZ motion provides the capability milling complex shapes. In addition, the rigidly clamped C-axis disc brake enables heavy duty and precision machining.
All enough in single setup
LYNX 220Y series
Z-axis
Y-axis
Ys-a
xis
X-ax
is
Z-axis
Y-axis
Ys-a
xis
X-ax
is
Y-axis
Y-axis
Y-axis
Y-axis
Y-axis
YX
Y-axis
YX
On-center face groove Poly-side machine Off-center side groove Y&X-axis circular interpolation
05
Basic Structure
High Rigid & Stable Machine Structure
Having roller type LM Guide at all axes applies high rigidity and high accuracy.
Travel distance
X-axis 205 mm (8.1 inch)
Z-axis 350 mm (13.8 inch) (Y)
560 mm (22.0 inch) (LY / LSY)
Capacity
Lynx 220YA / LYA / LSYA Lynx 220YC / LYC / LSYC
Spindle speed 6000 r/min 4500 r/min
Max. Turning diameter 300 mm (11.8 inch)
Bar working diameter 51 mm (2.0 inch) 65 mm (2.6 inch)
Chuck size 6 inch 8 inch
Rapid Traverse Rate
X-axis 30 m/min
Z-axis 36 m/min
Max. Turning length
300 mm (11.8 inch) (220Y) 510 mm (20.1 inch) (220LY / LSY)
X-axisY-axis
Z-axis
High productivity
All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity.
Turret
Turret Indexing time (1 station swivel) 0.11 S
Max. Rotary tool speed 6000 r/min
06
Lynx Series added with SY-axis, enabling One Set-up Save time, reduce labor, high accuracy!
1 set-up / 1 operator 2 set-up / 2 operators
= +
Lynx 220LSY Machine 1 Machine 2
Workpiece : Machinery Component
Material : Aluminum (AL7075)
Workpiece size : Ø70 x 35 mm
Cutting tool : 16 set
Productivity Effect
Machine 1 Machine 2
manual transfer1 min
Setting30 sec
Setting10 sec
Milling Cutting6 min 20 sec
Turning Cutting1 min 10 sec
General Cutting Process
Lynx 220 LSY
Machine
Lynx 220 LSY
auto transfer12 sec
Milling Cutting5 min 30 sec
Setting10 sec
Turning Cutting1 min 5 sec
2 min 13 sec Shorter
* Cutting time curtailment : Tool change time & Rapid traverse rate Calculation
Productivity
25 %Improved
Finished processing time comparison
This function enables the position setting of tail stock automatically. In programmable tail stock, the Z-axis position of tail stock is recorded automatically as the clamped position of tail stock. When tail stock needs to move to the other position, Z-axis moves to the pre-recorded position of Z-axis and tail stock unclamps by the button of Operation Panel.
EZ automatic tail stock function (LY)
This is specially designed for improving the efficiency of CNC turning center. If a user selects target tool to be checked by Tool Setter in manual mode, its moving axis is advanced forward to make the setter easy to touch off the tools, and the axis moves backward after touching the tool automatically.
EZ tool setter function
Power Saving Function
This is smart function that can turn off the machine light automatically when no user touches key board of operation panel during specified time.
Automatic machine light turns off
If CNC operator's panel has not been used for a time, the motors for spindle, servo axis, coolant pump and chip conveyor etc. are powered off automatically. It is effective to reduce standby power. Save up stand by power from 10 to 14%.
Automatic machine sleep
07
Doosan’s New Operation Panel
1. 10.4” color LCD : Easy to control and programming
2. Unique operator panel of Doosan Infracore designed with membrane switches
3. New operator panel for all the models with enhanced accessibility
4. User configurable, detachable buttons to set up customized options
Doosan-Fanuc i series10.4" color TFT LCD monitorLarge 10.4" LCD screen showing error messages of the machine and controller improves operator’s work convenience.
PCMCIA Card
1
2
3
USB Port Ethernet Connectivity (embedded)Swing-type PanelThe operation panel can swing up to 88° to provide the operator with convenience during work.
4
5
6
12
34
5
6
EZ FunctionThis function is to support simple setting of Tool Setter and improve the function to set tail stock position automatically with recorded tail stock position.
New Doosan operation panel designed ergonomically and 10.4” color LCD provide convenient operation for operators
Operation Convenience
08
Easy Operation Package
These DOOSAN software packages have been customized to provide user-friendly functions.
ProgrammingG Code list M Code list
Operator can check the meaning of each G-code.
Operator can check the meaning of each M-code.
Operator can calcute numerical formula in relation to arc and hole easily.
Calculator
Cycle for lathe machining• Drilling
• Bar roughing (including preformed work-piece)
• Bar finishing
• Threading (General purpose thread, metric, etc.)
• Grooving (Standard, Trapezoidal)
Easy Guide iOperation Guidance, which supports entire operations on an all-in-one screen for daily machining including creating a program on the machine.
• Uses one display screen to perform all operations including programming, checking by animation, and real machining.
• User-Friendly Operation : Soft key selection of comprehensive cycle library
• Easy programming Based on ISO-code program format, complex machining motions can be created easily by this menu format.
• Machine status window Machine status such as actual position, feedrate and load meter are always displayed.
• Realistic machining simulation 3-D solid model machining simulation is available.
• Intuitive menu selecting Menu can be selected easily and intuitively by soft-keys with icons.
Programming time can be reducedCycle machining menus for both of lathe
machining and milling are available
Operation / Maintenance
A major determinant of efficiency is the cost associated with setting up the equipment to make a particular product. This software can be used to manage machine operation rate of 3 operators. Total machine operation and real machining time for a month can be recorded and measured. It helps to evaluate and monitor each operational efficiency. To keep it secure, Password setting is essential.
Operation rate - user log in Back up custom dataTool load monitor
The main function of this software is to detect overload when a tool is wrong, and change it to an other tool. Stop machine to protect a tool holder and next tools by detecting overload caused by tool breakage or its wear. Use editable tool life management for spare tools. Monitor load meter for all spindles and axes. If the tool load reaches abnormal band recorded in “Set data”, the software issues an feed hold alarm or skips the tool.
This can be used to record tool load information detected in “Tool load monitor” for all tools used during cutting. By reloading recorded data in tool table, Tool Load Monitor software can compare the actual tool load with a recorded load pattern.
opt.
09
Main Spindle
Sub Spindle Rotary Tool Spindle
Lynx 220YA / LYA / LSYA6000 r/min : 15 / 11 kW
Lynx 220LSYA [LSYC]6000 r/min : 5.5 / 3.7 kW
Lynx 220Y / SY / LSY6000 r/min : 3.7kW
Lynx 220YC / LYC / LSYC4500 r/min : 15 / 11 kW
Torque : N.m (ft-lb) Power : kW (Hp)
0 1125 60003410
Spindle speed (r/min)
Max. 47N.m (34.7ft-lb) / 30min
Max. 31N.m (22.9ft-lb) /Cont.
3.7kW (5.0Hp)/ Cont.
5.5kW (10.1Hp) / 30min
0.5N.m (0.7ft-lb)0.8N.m (1.1ft-lb)
2.7kW (3.6Hp) / Cont.
3.9kW (5.2Hp) / 30min
15 kW (20.1Hp) / 30min
11 kW (14.8Hp) / 30min
Torque : N.m (ft-lb) Power : kW (Hp)
0 1125 60002625
Spindle speed (r/min)
Max. 127N.m(93.7ft-lb) / 30min
Max. 93N.m (68.6ft-lb) / Cont.
1.2N.m (1.6ft-lb)
6.5kW (8.7Hp) / Cont.
7.5kW (10.1Hp) / 30min
1.1N.m (1.5ft-lb)
Torque : N.m (ft-lb) Power : kW (Hp)
0 844 45001969
Spindle speed (r/min)
Max. 169N.m (124.7ft-lb) / 30min
Max. 124N.m (91.5ft-lb) / Cont.
15kW (20.1Hp) / 30min
6.5kW (8.7Hp) / Cont.
7.5kW (10.1Hp ) / 30min
1.6N.m (2.1ft-lb)
1.4N.m (1.9ft-lb)
Torque : N.m (ft-lb) Power : kW (Hp)
0 1500 6000
Spindle speed (r/min)
Max. 23.5N.m (17.3ft-lb)
Max. 7N.m (5.2ft-lb)
1.1kW (1.5Hp) / Cont.
5.9 N.m (4.4ft-lb)0.8 N.m (0.6ft-lb)
3.7kW (5.0Hp) /10min, S3 25%
11kW (14.8Hp) / 30min
Lynx 220YA / LYA / LSYA6000 r/min : 15 / 11 kW
Lynx 220LSYA [LSYC]6000 r/min : 5.5 / 3.7 kW
Lynx 220Y / SY / LSY6000 r/min : 3.7kW
Lynx 220YC / LYC / LSYC4500 r/min : 15 / 11 kW
Torque : N.m (ft-lb) Power : kW (Hp)
0 1125 60003410
Spindle speed (r/min)
Max. 47N.m (34.7ft-lb) / 30min
Max. 31N.m (22.9ft-lb) /Cont.
3.7kW (5.0Hp)/ Cont.
5.5kW (10.1Hp) / 30min
0.5N.m (0.7ft-lb)0.8N.m (1.1ft-lb)
2.7kW (3.6Hp) / Cont.
3.9kW (5.2Hp) / 30min
15 kW (20.1Hp) / 30min
11 kW (14.8Hp) / 30min
Torque : N.m (ft-lb) Power : kW (Hp)
0 1125 60002625
Spindle speed (r/min)
Max. 127N.m(93.7ft-lb) / 30min
Max. 93N.m (68.6ft-lb) / Cont.
1.2N.m (1.6ft-lb)
6.5kW (8.7Hp) / Cont.
7.5kW (10.1Hp) / 30min
1.1N.m (1.5ft-lb)
Torque : N.m (ft-lb) Power : kW (Hp)
0 844 45001969
Spindle speed (r/min)
Max. 169N.m (124.7ft-lb) / 30min
Max. 124N.m (91.5ft-lb) / Cont.
15kW (20.1Hp) / 30min
6.5kW (8.7Hp) / Cont.
7.5kW (10.1Hp ) / 30min
1.6N.m (2.1ft-lb)
1.4N.m (1.9ft-lb)
Torque : N.m (ft-lb) Power : kW (Hp)
0 1500 6000
Spindle speed (r/min)
Max. 23.5N.m (17.3ft-lb)
Max. 7N.m (5.2ft-lb)
1.1kW (1.5Hp) / Cont.
5.9 N.m (4.4ft-lb)0.8 N.m (0.6ft-lb)
3.7kW (5.0Hp) /10min, S3 25%
11kW (14.8Hp) / 30min
Power-torque Diagram
210 (8.3)
Ø
175 (6.9)Ø
135 (5.3)
Ø
300
(11.
8)
Ø
205 (8.1)
55 (2.2)
200
(7.9
)
Ø
552 (21.7)
Ø
170 (6.7)Ø
242
(9.5
)
Ø
114 (4.5)Ø
225 (8.9)
Ø
34.5
(1.3) (22.4)68.5 13 (0.5)
Ø
40 (1
.6)
230
(9.1
)
Ø
61.5(2.4)
52
126
(5.0
)
3060(2.4)(1.2)
160 (6.3)
150 (5.9)
(2.0) [Max
.turn
ing
dia.
]
[Main spindle/6-inch chuck]
[Main spindle/8-in
ch chuck]
[Sub spindle/5-inch chuck]
[X-axis travel]
[Max.tool swing]
210 (8.3)
Ø
300
(11.
8)
Ø
205 (8.1)
55 (2.2)
175 (6.9)Ø
218 (8.6
)
Ø
218 (8.6)Ø
175 (6.9)
Ø
218 (8.6)
Ø
552 (21.7)
Ø
61.5(2.4)
150 (5.9)
3060 (2.4)(1.2)
160 (6.3)
126
(5.0
)
52(2.0)
[Max. tool swing]
[Main spindle/6-inch chuck]
[Max
.turn
ing
dia.
]
[Main spindle/8-in
ch chuck]
[X-axis travel]
52.5
(2.1)
52.5
(2.1)
105
(4.1
)
65 (2.6)160 (6.3)
175 (6.9) 25 (1.0)
200 (7.9)[X-axis travel]
[Y-a
xis
trave
l]
Spindle CenterInterference Areawith Tail Stock
160 (6.3) 1195 (7.7)44 (1.7)
59 (2.3)
[Y-a
xis
trave
l]
[X-axis travel]
Spindle CenterInterference Areawith Tail Stock
52.5
(2.1)
52.5
(2.1)
105
(4.1
)
175 (6.9) 1160 (6.3) 65 (2.6)
[Y-a
xis
trave
l]
Spindle CenterInterference Areawith Sub Spindle
[X-axis travel]
52.5
(2.1)
52.5
(2.1)
105
(4.1
)
160 (6.3) 20 (0.8)44 (1.7)
59 (2.3)
176 (6.9)[X-axis travel]
[Y-a
xis
trave
l]
Spindle CenterInterference Areawith Sub Spindle
52.5
(2.1)
52.5
(2.1)
105
(4.1
)
Tool Interference
unit : mm (inch)Lynx 220LY
Lynx 220LSY
10
A B C D E F G H I J K L M
L220Y 2233(87.9)
190 (A) / 220 (C)(7.5 / 8.7)
50(2.0)
2605(102.6)
3299(129.9)
734(28.9)
1921(75.6)
2243(88.3)
10(0.4)
1060(41.7)
1702(67.0)
2100(82.7)
448(17.6)
L220LY 2660(104.7)
190 (A) / 220 (C)(7.5 / 8.7)
50(2.0)
3249(127.9)
3726(146.7)
734(28.9)
1921(75.6)
2243(88.3)
10(0.4)
1060(41.7)
1702(67.0)
2100(82.7)
448(17.6)
unit : mm (inch)
11
External Dimensions
External Dimensions
B
C
A
I
H
E
D
F
G
L
J
K M
SIDE CHIP COVEYOR(Hinged Type)
SPINDLE CENTER
B
C
A
I
H
E
D
F
G
L
J
K M
SIDE CHIP COVEYOR(Hinged Type)
SPINDLE CENTER
Lynx 220LYA / LYC
ID Tool OD Tool
Straight Milling Face Tool
Working Range
unit : mm (inch)
65 (2.6
)
8069.5(LYA)/88(LYC)
205
(8.1
)
10(0.4)
(OT)
2 (0
.1)(O
T)30
(1.2
)17
5 (6
.9)
52 (2
.0)
26 (1.0) 84.5 (3.3)
(QUILL TRAVEL)
(TAIL STOCK TRAVEL)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
2 (0
.1)(
OT)
10(0.4)
(OT)
6030
(1.2
)(2.4
)
42 (1
.7)
150
(5.9
)55
(2.2
)
8069.5(LYA)/88(LYC)
96.5 (3.8)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)
80 (3.1)
205
(8.1
)
29(1.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
8069.5(LYA)/88(LYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
29.5 (1.2)29 (1.1)
51 (2.0
)
10(0.4)
(OT)
2 (0
.1)(
OT)
2 (0
.1)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
10(0.4)
(OT)
2 (0
.1)(
OT)
175
(6.9
)30
(1.2
)
14 (0
.6)
26(1.0)
104.5 (4.1)
205
(8.1
)
30 (1.2)
5(0
.2)(
2.4)60
8069.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
54 (2
.1)
175
(6.9
)30
(1.2
)
205
(8.1
)
80 258.5
99.5 (3.9)39(1.5)
10(0.4)
(OT)
2 (0
.1)(
OT)
65 (2.6
)
69.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1) (10.2)
(0.4)
(0.1
)(O
T)
205
(8.1
)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)
10(OT)
2
175
(6.9
)30 (1.2
) 14(0
.6)
26(1.0)
104.5(4.1)
30(1.2)
5(0
.2)
60 (2.4
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
65 (2.6
)
8069.5(LYA)/88(LYC)
205
(8.1
)
10(0.4)
(OT)
2 (0
.1)(O
T)30
(1.2
)17
5 (6
.9)
52 (2
.0)
26 (1.0) 84.5 (3.3)
(QUILL TRAVEL)
(TAIL STOCK TRAVEL)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
2 (0
.1)(
OT)
10(0.4)
(OT)
6030
(1.2
)(2.4
)
42 (1
.7)
150
(5.9
)55
(2.2
)
8069.5(LYA)/88(LYC)
96.5 (3.8)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)
80 (3.1)
205
(8.1
)
29(1.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
8069.5(LYA)/88(LYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
29.5 (1.2)29 (1.1)
51 (2.0
)
10(0.4)
(OT)
2 (0
.1)(
OT)
2 (0
.1)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
10(0.4)
(OT)
2 (0
.1)(
OT)
175
(6.9
)30
(1.2
)
14 (0
.6)
26(1.0)
104.5 (4.1)
205
(8.1
)
30 (1.2)5
(0.2
)(2.
4)60
8069.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
54 (2
.1)
175
(6.9
)30
(1.2
)
205
(8.1
)
80 258.5
99.5 (3.9)39(1.5)
10(0.4)
(OT)
2 (0
.1)(
OT)
65 (2.6
)
69.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1) (10.2)
(0.4)
(0.1
)(O
T)
205
(8.1
)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)
10(OT)
2
175
(6.9
)30 (1.2
) 14(0
.6)
26(1.0)
104.5(4.1)
30(1.2)
5(0
.2)
60 (2.4
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
12
Angular Milling Cut Off Holder
unit : mm (inch)
65 (2.6
)
8069.5(LYA)/88(LYC)
205
(8.1
)
10(0.4)
(OT)
2 (0
.1)(O
T)30
(1.2
)17
5 (6
.9)
52 (2
.0)
26 (1.0) 84.5 (3.3)
(QUILL TRAVEL)
(TAIL STOCK TRAVEL)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
2 (0
.1)(
OT)
10(0.4)
(OT)
6030
(1.2
)(2.4
)
42 (1
.7)
150
(5.9
)55
(2.2
)
8069.5(LYA)/88(LYC)
96.5 (3.8)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)
80 (3.1)
205
(8.1
)
29(1.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
8069.5(LYA)/88(LYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
29.5 (1.2)29 (1.1)
51 (2.0
)
10(0.4)
(OT)
2 (0
.1)(
OT)
2 (0
.1)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1)
10(0.4)
(OT)
2 (0
.1)(
OT)
175
(6.9
)30
(1.2
)
14 (0
.6)
26(1.0)
104.5 (4.1)
205
(8.1
)
30 (1.2)
5(0
.2)(
2.4)60
8069.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
54 (2
.1)
175
(6.9
)30
(1.2
)
205
(8.1
)
80 258.5
99.5 (3.9)39(1.5)
10(0.4)
(OT)
2 (0
.1)(
OT)
65 (2.6
)
69.5(LYA)/88(LYC) (QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
(2.7) (3.5) (3.1) (10.2)
(0.4)
(0.1
)(O
T)
205
(8.1
)
46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)
45 (1.8)(LYA) / 63.5 (2.5)(LYC)
10(OT)
2
175
(6.9
)30 (1.2
) 14(0
.6)
26(1.0)
104.5(4.1)
30(1.2)
5(0
.2)
60 (2.4
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
80 (3.1)
560 (22.0)80
205
(8.1
)
20 (0
.8)
185
(7.3
)
560 (22.0)
2 (0
.1)(
OT) 10
(0.4)(OT)
7 (0
.3)
29(1.1)
81.5 (3.2)
69.5(2.7) (3.5) (3.1)
(LYA)/88(LYC)
55 (2.2
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
205
(8.1
)
29(1.1)
81.5 (3.2)
(2.7) (3.5) (3.1)80
10(0.4)
(OT)
2 (0
.1)(
OT)
56 (2
.2)1
49 (5
.9)
43 (1
.7)
69.5(LYA)/88(LYC)
91.1
(3.6
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)80
205
(8.1
)
20 (0
.8)
185
(7.3
)
560 (22.0)
2 (0
.1)(
OT) 10
(0.4)(OT)
7 (0
.3)
29(1.1)
81.5 (3.2)
69.5(2.7) (3.5) (3.1)
(LYA)/88(LYC)
55 (2.2
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
80 (3.1)
560 (22.0)
560 (22.0)
205
(8.1
)
29(1.1)
81.5 (3.2)
(2.7) (3.5) (3.1)80
10(0.4)
(OT)
2 (0
.1)(
OT)
56 (2
.2)1
49 (5
.9)
43 (1
.7)
69.5(LYA)/88(LYC)
91.1
(3.6
)
(QUILL TRAVEL)
(X-A
XIS
TRAV
EL)
(Z-AXIS TRAVEL)
(TAIL STOCK TRAVEL)
68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)
Triple ID Tool Triple ID Tool
13
Working Range
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
30 (1
.2)1
75 (6
.9)
117 66 125
2 (0.1
)(O
T)
10(0.4)
(OT)
5 (0
.2)
113
(4.4
)
65 (2.6
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)65 (2.6)(LSYA) / 83.5 (3.3)(LSYC)
(7.5) (8.2)
(4.6) (2.6) (4.9)
560 (22.0)
(0.4)
(0.1
)
560 (22.0)
205
(8.1
)
20 (0
.8)
185
(7.3
)
124(4.9) (1.9) (5.2)
(3.1)
47 133
(2.2
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)69 (2.7)(LSYA) / 87.5 (3.4)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
(4.9) (1.4) (4.8)
10(OT)(0.4)
2(0
.1)(
OT)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
560 (22.0)(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
56 (2
.2)
149
(5.8
)
21 (0
.8)
12 (0
.4)
101
(3.9
)
124 37 122
91 (3.5
)
68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)
22 (0.9)
10(OT)2
(0.1
)(O
T)560 (22.0)
118(4.6) (2.6) (5.7)
65 145
73 (2
.9)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
190(LSYA)/208.5(LSYC)
65
560 (22.0)
(0.4)
(2.6
)5
(0.2
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)45 (1.8)(LSYA) / 63.5 (2.5)(LSYC)
(7.5) (8.2)
78
65
140
190(LSYA)/208.5(LSYC)
2
10(OT)
105(4.1) (3.1) (5.5)
106
(4.2
)
(0.1
)(O
T)
560 (22.0)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
560 (22.0)
(0.4)
(2.6
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)
85 (3.3
)
560 (22.0)
10 (0.4) (OT)
2(0
.1)(O
T)
205
(8.1
)
50 (2
.0)
155
(6.1
)
141 (5.6) (1.7)(1.8)
43 46
14 (0
.6)
121
(4.8
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)144 (5.7)(LSYA) / 162.5 (6.4)(LSYC)
(7.5) (8.2)
10(OT)
2(O
T)16 (0.6
)
48(1
.9)
55
77.55
65(2
.6) 29
(1.1
)
393
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
(0.1
)(3
.7)
Lynx 220LSYA / LSYC
ID Tool Double ID Tool
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
30 (1
.2)1
75 (6
.9)
117 66 125
2 (0.1
)(O
T)
10(0.4)
(OT)
5 (0
.2)
113
(4.4
)
65 (2.6
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)65 (2.6)(LSYA) / 83.5 (3.3)(LSYC)
(7.5) (8.2)
(4.6) (2.6) (4.9)
560 (22.0)
(0.4)
(0.1
)
560 (22.0)
205
(8.1
)
20 (0
.8)
185
(7.3
)
124(4.9) (1.9) (5.2)
(3.1)
47 133
(2.2
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)69 (2.7)(LSYA) / 87.5 (3.4)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
(4.9) (1.4) (4.8)
10(OT)(0.4)
2(0
.1)(
OT)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
560 (22.0)(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
56 (2
.2)
149
(5.8
)
21 (0
.8)
12 (0
.4)
101
(3.9
)
124 37 122
91 (3.5
)
68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)
22 (0.9)
10(OT)
2 (0
.1)(
OT)
560 (22.0)
118(4.6) (2.6) (5.7)
65 145
73 (2
.9)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
190(LSYA)/208.5(LSYC)
65
560 (22.0)
(0.4)
(2.6
)5
(0.2
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)45 (1.8)(LSYA) / 63.5 (2.5)(LSYC)
(7.5) (8.2)
78
65
140
190(LSYA)/208.5(LSYC)
2
10(OT)
105(4.1) (3.1) (5.5)
106
(4.2
)
(0.1
)(O
T)
560 (22.0)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
560 (22.0)
(0.4)
(2.6
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)
85 (3.3
)
560 (22.0)
10 (0.4) (OT)
2(0
.1)(O
T)
205
(8.1
)
50 (2
.0)
155
(6.1
)
141 (5.6) (1.7)(1.8)
43 46
14 (0
.6)
121
(4.8
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)144 (5.7)(LSYA) / 162.5 (6.4)(LSYC)
(7.5) (8.2)
10(OT)
2(O
T)16 (0.6
)
48(1
.9)
55
77.55
65(2
.6) 29
(1.1
)
393
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
(0.1
)(3
.7)
Triple ID Tool Face Tool
190(LSYA)/208.5(LSYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
19 (0
.7)
130
(5.1
)
125(4.9) (2.3)(2.8)
58 70
51 (2.0
)
2(0
.1)(
OT)
10(0.4)
(OT)
560 (22.0)
560 (22.0)(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)120 (4.7)(LSYA) / 138.5 (5.5)(LSYC)
(7.5) (8.2)
6030
(1.2
)(2.4
)
124 59 137
48 (1
.9)
10(OT)
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
(4.9) (2.3) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
(0.4)
2(0
.1)(
OT)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
565 (22.2)
190(LSYA)/208.5(LSYC)
205
(8.1
)
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)
560 (22.0)190(LSYA)/208.5(LSYC)
560 (22.0)
205
(8.1
)
1378697(3.8) (3.4) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
78 (3.1
)
10(0.4)
(OT)
2(0
.1)(
OT)
6030
(2.4
)(1
.2)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)(B-AXIS TRAVEL)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
12 (0.5)
OD Tool
14
unit : mm (inch)
unit : mm (inch)
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
30 (1
.2)1
75 (6
.9)
117 66 125
2 (0.1
)(O
T)
10(0.4)
(OT)
5 (0
.2)
113
(4.4
)
65 (2.6
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)65 (2.6)(LSYA) / 83.5 (3.3)(LSYC)
(7.5) (8.2)
(4.6) (2.6) (4.9)
560 (22.0)
(0.4)
(0.1
)
560 (22.0)
205
(8.1
)
20 (0
.8)
185
(7.3
)
124(4.9) (1.9) (5.2)
(3.1)
47 133
(2.2
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)69 (2.7)(LSYA) / 87.5 (3.4)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
(4.9) (1.4) (4.8)
10(OT)(0.4)
2(0
.1)(
OT)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
560 (22.0)(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
56 (2
.2)
149
(5.8
)
21 (0
.8)
12 (0
.4)
101
(3.9
)
124 37 122
91 (3.5
)
68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)
22 (0.9)
10(OT)
2 (0
.1)(
OT)
560 (22.0)
118(4.6) (2.6) (5.7)
65 145
73 (2
.9)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
190(LSYA)/208.5(LSYC)
65
560 (22.0)
(0.4)
(2.6
)5
(0.2
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)45 (1.8)(LSYA) / 63.5 (2.5)(LSYC)
(7.5) (8.2)
78
65
140
190(LSYA)/208.5(LSYC)
2
10(OT)
105(4.1) (3.1) (5.5)
106
(4.2
)
(0.1
)(O
T)
560 (22.0)
5 (0
.2)17
5 (6
.9)
30 (1
.2)20
5 (8
.1)
560 (22.0)
(0.4)
(2.6
)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)
85 (3.3
)
560 (22.0)
10 (0.4) (OT)
2(0
.1)(O
T)
205
(8.1
)
50 (2
.0)
155
(6.1
)
141 (5.6) (1.7)(1.8)
43 46
14 (0
.6)
121
(4.8
)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)144 (5.7)(LSYA) / 162.5 (6.4)(LSYC)
(7.5) (8.2)
10(OT)
2(O
T)16 (0.6
)
48(1
.9)
55
77.55
65(2
.6) 29
(1.1
)
393
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
(0.1
)(3
.7)
Angular Milling Angular Milling (offset)
190(LSYA)/208.5(LSYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
19 (0
.7)
130
(5.1
)
125(4.9) (2.3)(2.8)
58 70
51 (2.0
)
2(0
.1)(
OT)
10(0.4)
(OT)
560 (22.0)
560 (22.0)(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)120 (4.7)(LSYA) / 138.5 (5.5)(LSYC)
(7.5) (8.2)
6030
(1.2
)(2.4
)
124 59 137
48 (1
.9)
10(OT)
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
(4.9) (2.3) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
(0.4)
2(0
.1)(
OT)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
565 (22.2)
190(LSYA)/208.5(LSYC)
205
(8.1
)
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)
560 (22.0)190(LSYA)/208.5(LSYC)
560 (22.0)
205
(8.1
)
1378697(3.8) (3.4) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
78 (3.1
)
10(0.4)
(OT)
2(0
.1)(
OT)
6030
(2.4
)(1
.2)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)(B-AXIS TRAVEL)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
12 (0.5)
Double OD Tool (Main)
190(LSYA)/208.5(LSYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
19 (0
.7)
130
(5.1
)
125(4.9) (2.3)(2.8)
58 70
51 (2.0
)
2(0
.1)(
OT)
10(0.4)
(OT)
560 (22.0)
560 (22.0)(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)120 (4.7)(LSYA) / 138.5 (5.5)(LSYC)
(7.5) (8.2)
6030
(1.2
)(2.4
)
124 59 137
48 (1
.9)
10(OT)
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
(4.9) (2.3) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
(0.4)
2(0
.1)(
OT)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
565 (22.2)
190(LSYA)/208.5(LSYC)
205
(8.1
)
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)
560 (22.0)190(LSYA)/208.5(LSYC)
560 (22.0)
205
(8.1
)
1378697(3.8) (3.4) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
78 (3.1
)
10(0.4)
(OT)
2(0
.1)(
OT)
6030
(2.4
)(1
.2)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)(B-AXIS TRAVEL)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
12 (0.5)
Double OD Tool [Main / Sub] Straight Milling
190(LSYA)/208.5(LSYC)
205
(8.1
)
16 (0
.6)
189
(7.4
)
19 (0
.7)
130
(5.1
)
125(4.9) (2.3)(2.8)
58 70
51 (2.0
)
2(0
.1)(
OT)
10(0.4)
(OT)
560 (22.0)
560 (22.0)(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)120 (4.7)(LSYA) / 138.5 (5.5)(LSYC)
(7.5) (8.2)
6030
(1.2
)(2.4
)
124 59 137
48 (1
.9)
10(OT)
190(LSYA)/208.5(LSYC) 560 (22.0)
560 (22.0)
205
(8.1
)
(4.9) (2.3) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
(0.4)
2(0
.1)(
OT)
(Z-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
565 (22.2)
190(LSYA)/208.5(LSYC)
205
(8.1
)
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)
(Z-AXIS TRAVEL)
(B-AXIS TRAVEL)
(X-A
XIS
TRAV
EL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
(7.5) (8.2)
560 (22.0)190(LSYA)/208.5(LSYC)
560 (22.0)
205
(8.1
)
1378697(3.8) (3.4) (5.4)
55 (2
.2)
150
(5.9
)
20 (0
.8)
78 (3.1
)
10(0.4)
(OT)
2(0
.1)(
OT)
6030
(2.4
)(1
.2)
(X-A
XIS
TRAV
EL)
(B-AXIS TRAVEL)
(Z-AXIS TRAVEL)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)53 (2.1)(LSYA) / 71.5 (2.8)(LSYC)
(7.5) (8.2)
2 (0.1
)(O
T)
10(0.4)
(OT)
123(4.8) (1.9) (5.5)
48 140
60 (2
.4)
145
(5.7
)
24 (0
.9)
3 (0
.1)
48 (1
.9)
95 (3.7
)
560 (22.0)(B-AXIS TRAVEL)
560 (22.0)(Z-AXIS TRAVEL)
205
(8.1
)(X
-AXI
S TR
AVEL
)
46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)50 (2.0)(LSYA) / 68.5 (2.7)(LSYC)
190(LSYA)/208.5(LSYC)(7.5) (8.2)
12 (0.5)
15
Tooling System
16
Lynx 220Y / LY
ø32 (1.3)
ø20 (0.8)
Boring Bar
StraightMilling Head
AngularMilling Head
O.D Tool Head
O.D Tool
Collet Adapter
Milling ArborAdapter
Milling Collet
Weldon Adapter
Boring Bar
Drill
Boring Bar Sleeves
Boring Bar Sleeves II ø8 (0.3) ø12 (0.5) ø10 (0.4) ø16 (0.6)
Drill SocketMT #1MT #2MT #3
U-Drill
O.D Tool
Cutting Tool
U-Drill Cap
24 station Turret(BMT 45P)
I.D Tool Holder
Face Tool Holder
U-Drill Sleevesø20 (0.8)ø25 (1.0)
ER20Ø2~Ø13 (1/16~8/16)
ø32 (1.3)
□20 (0.8)
□20 (0.8)
Double O.D Tool Holder (F)□20 (0.8)
Cut-Off Tool Holder□20 (0.8)
Triple I.D Tool Holderø20 (0.8)
□20 (0.8)
ø10 (0.4) ø20 (0.8)ø12 (0.5) ø25 (1.0)
ø16 (0.6)ø32 (1.3)
Standard
opt.
unit : mm (inch)
17
Lynx 220LSY
ø32 (1.3)
ø20 (0.8)
Boring Bar
StraightMilling Head
Angular(offset)Milling Holder
AngularMilling Head
O.D Tool Head
O.D Tool
Collet Adapter
Milling ArborAdapter
Milling Collet
Weldon Adapter
Boring Bar
Drill
Boring Bar Sleeves
Boring Bar Sleeves II
Drill SocketMT #1MT #2MT #3
U-Drill
Cutting Tool
U-Drill Cap
24 station Turret(BMT 45P)
I.D Tool Holder
U-Drill Sleevesø20 (0.8)ø25 (1.0)
ø32 (1.3)
ER20Ø2~Ø13(1/16~8/16)
ø32 (1.3)
□20 (0.8)
Double O.D Tool Holder (R+L)□20 (0.8)
Double O.D Tool Holder (F)□20 (0.8)
Double O.D Tool Holder (R)□20 (0.8)
Cut-Off Tool Holder□20 (0.8)
Double I.D Tool Holderø20 (0.8)
Triple I.D Tool Holderø20 (0.8)
□20 (0.8)
U-Drill
U-Drill Cap
U-Drill Sleevesø20 (0.8)ø25 (1.0)
O.D Tool
Face Tool Holder□20 (0.8)
ø10 (0.4) ø20 (0.8)ø12 (0.5) ø25 (1.0)ø16 (0.6)
ø10 (0.4) ø16 (0.6)ø12 (0.5) ø20 (0.8)
Standard
opt.
opt.
unit : mm (inch)
18
Machine Specifications
Description Unit Lynx 220YA Lynx 220YC Lynx 220LYA Lynx 220LYC Lynx 220LSYA Lynx 220LSYC
Capacity
Swing over bed mm (inch) 600 (23.6)Swing over saddle mm (inch) 400 (15.7)Recom. Turning diameter mm (inch) 170 (6.7) 210 (8.3) 170 (6.7) 210 (8.3) 170 (6.7) 210 (8.3)Max. Turning diameter mm (inch) 300 (11.8)Max. Turning length mm (inch) 300 (11.8) 510 (20.1)Chuck size inch 6 8 6 8 6 8Bar working diameter mm (inch) 51 (2.0) 65 (2.6) 51 (2.0) 65 (2.6) 51 (2.0) 65 (2.6)
Travels
Travel distance X-axis mm (inch) 205 (8.1)Z-axis mm (inch) 350 (13.8) 560 (22.0)Y-axis mm (inch) 105 (±52.5) (4.1 (±2.1))C1, C2-axis mm (inch) 360 (in 0.001) (14.2)
Feedrate
Rapid Traverse Rate X-axis m/min (ipm) 30 (1181.1)Z-axis m/min (ipm) 36 (1417.3)Y-axis m/min (ipm) 10 (393.7)C-axis m/min (ipm) 200 (7874.0)
Main spindle
Max. Spindle speed r/min 6000 4500 6000 4500 6000 4500Spindle nose ASA A2-5 A2-6 A2-5 A2-6 A2-5 A2-6Spindle bearing diameter (Front) mm (inch) 90 (3.5) 110 (4.3) 90 (3.5) 110 (4.3) 90 (3.5) 110 (4.3)Spindle through hole mm (inch) 61 (2.4) 76 (3.0) 61 (2.4) 76 (3.0) 61 (2.4) 76 (3.0)Min. spindle Indexing angle (C-axis) deg 0.001
Turret
No. of tool stations ea 12 (24 Position Index)OD tool size mm (inch) 20 x 20 (0.8 x 0.8)Max. boring bar size mm (inch) 32 / 20 (1.3 / 0.8)Turret Indexing time (1 station swivel) s 0.11
Max. Rotary tool speed r/min 6000
Tail StockQuill diameter mm (inch) - - 65 (2.6) - -Quill bore taper MT - - #4 - -Quill travel mm (inch) - - 80 (3.1) - -
Sub spindle
Spindle speed r/min - - - - 6000Spindle nose FLAT - - - - Ø110Spindle bearing diameter (Front) mm (inch) - - - - 70 (2.8)Spindle through hole mm (inch) - - - - 43 (1.7)Min. spindle Indexing angle (C-axis) deg - - - - 0.001
Motors
Main spindle motor power (30min / cont.) kW (Hp) 15 / 11 (20.1 / 14.8)
Sub spindle motor power kW (Hp) - - - - 5.5 / 3.7 (7.4 / 5.0)Rotary tool motor power kW (Hp) 3.7 (5.0)Coolant pump motor power kW (Hp) 0.4 (0.5)
Power source
Electric power supply(rated capacity) kVA 27.8 33.7
Machine Dimensions
Height mm (inch) 1920 (75.6)Width mm (inch) 1710 (67.3)Depth mm (inch) 2425 (95.5) 2455 (96.7) 2850 (112.2) 2880 (113.4) 2850 (112.2) 2880 (113.4)Weight kg (Ib) 3400 (7495.6) 3500 (7716.1) 3900 (8597.9) 4000 (8818.4) 3900 (8597.9) 4000 (8818.4)
NC CONTROL DOOSAN Fanuc i series
• Coolant supply equipment
• Foot switch
• Front door interlock
• Full enclosure chip and coolant shield
• Hand tool kit (including small tool for operations)
• Hydraulic chuck and actuating cylinder (tool holders & boring sleeves)
• Hydraulic power unit
• Levelling jack screw and plates
• Lubrication equipment
• Soft jaws
• Standard tooling kit
• Sub spindle (Lynx 220 LSYA / LSYC)
• Tail stock (Lynx 220 LYA / LYC)
• Work light
• Workpiece cut off confirmation (electrical type) (Lynx 220 LSYA / LSYC)
Standard features
• The specifications and information above-mentioned may be changed without prior notice.• For more details, please contact Doosan
• Coolant chiller
• Hardened & ground jaws
• Mist collector
• Oil skimmer
• Parts catcher (Lynx 220 : ø 65 x L140)
• Pressure switch for chucking pressure check
• Programmable Tail stock (Lynx 220 LYA / LYC)
• Proximity switches for chuck clamp detection
• Proximity switches for tail stock quill position detection*1
• Signal tower (yellow, red, green)
• Special chucks
• Tool pre-setter (Electric type)
• Tool pre-setter (manual type)
• Additional tool holders & sleeves
• Air blast for chuck jaw cleaning
• Air gun
• Automatic door
• Automatic measuring system (in process touch probe)
• Automatic power off
• Automatic work loading
• Bar feeder interface
• Chip conveyor
• Chip bucket*1 : This is available as option when tail stock
is applied to the machine.
Optional features
19
NC Unit Specifications DOOSAN Fanuc i series
AXES CONTROL- Controlled path 1 path [2 path]- Controlled axes X, Z, C, Y [C2, B]- Simultaneous controlled axes 4 axes- Angular axis control - Axis control by PMC - Backlash compensation 0 ~ ±9999 pulses- Backlash compensation for each - Chamfering on / off - Chuck and tail stock barrier - Cs contouring control - HRV2 control - Least input command 0.001 / 0.0001 mm/inch- Machine lock All axis / each axis- Mirror image - Overtravel - Rapid traverse and cutting feed - Stored pitch error compensation - Stored stroke check 1 - Stored stroke 2 and 3 - Stroke limit check before move - Torque control - Unexpected disturbance torque detection function
OPERATION- Automatic operation (memory) - DNC Operation (Reader / puncher interface is required)
- DNC Operation with Memory card - Dry run - Handle incremental feed X1, X10, X100- JOG feed - MDI operation - Manual handle feed 1unit- Manual intervention and return - Manual reference position return - Program number search - Program restart - Refernce position setting without dog - Reference position shift - Sequence number search - Single block - Wrong operation prevention
INTERPOLATION FUNCTIONS- 1st. Reference position return Manual, G28- 2nd. reference position return G30- 3rd / 4th reference point reurn - Circular interpolation G02- Continuous threading - Cylindrical interpolation - Dwell (per sec) G04- Helical interpolation - Linear interpolation G01- Multiple threading - Nano interpolation - Polygon machining with two spindle - Polar coordinate interpolation - Positioning G00- Reference position return check G27- Skip G31- Thread cutting / Synchronous cutting - Thread cutting retract - Torque limit skip - Variable lead threading
FEED FUNCTION- Automatic acceleration / deceleration - Cutting feedrate clamp - Feedrate override (10% unit) 0 - 200 %- Jog feed override (10% unit) 0 - 2000 mm/min- Override cancel - Rapid traverse override F0, 25, 100 %
AUXILIARY / SPINDLE SPEED FUNCTION - Actual spindle speed output- Auxiliary function lock- Constant surface speed control- M-code function- Multi spindle control- Rigid tapping- S-code function- Spindle orientation- Spindle serial output- Spindle speed override- [Spindle sychronous control]
PROGRAM INPUT- Absolute / incremental programming - Addition of custom macro common variables
#100~#199,#500~#999- Automatic coordinate system setting - Canned cycle for drilling / Turning - Circular interpolation by R programming - Coordinate system setting G50- Custom macro - Diameter/radius programming (X axis) - Direct drawing dimension programming - Direct input of coordinate system shift - G code system A / B / C - Interruption type custom macro - Label skip - Macro executor - Manual absolute on and off - Maximum program dimension ±9 digit- Multiple repetitive canned cycle G70 - G76- Multiple repetitive canned cycle II - Optional block skip 9 piece- Pattern data input - Parity check - Plane selection G17, G18, G19- Pocket calculator type decimal point programming - Program file name 32 characters- Program stop / end (M00, M01 / M02, M30) - Programmable data input G10- Sequence number N8 digit- SUB program call 10 folds nested- Work coordinate system G52-G59
TOOL FUNCTION / TOOL COMPENSATION- Automatic tool offset - T-code function T2+2 digits- Tool geometry / wear compensation - Tool life management - Tool Load Monitoring system * - Tool nose radius compensation - Tool offset G43, G44, G49- Tool offset pairs ±6 digits : 64 [128] pairs- Tool offset value counter input - Y-axis offset
EDITING OPERATION- Number of registered programs 400 [800] ea- Part program editing - Part program storage size
1280m (512kB) [ 2560m (1MB) ] - Play back
SETTING AND DISPLAY- Alarm history display - Multi-language display - Operating monitor screen - Program comment display 31 characters- Run hours / part count display - Self-diagnosis function - Soft operator's panel - Tool path graphic display
DATA INPUT / OUTPUT- External work number search 15 points- Memory card input / output - RS232C interface - Screen hard copy
OTHERS- Cycle start and lamp- Display unit- Feed hold and lamp- MDI unit- NC and servo ready- PCMCIA port in the front of LCD display unit- PMC system- USB port in the front of LCD display unit
INTERFACE FUNCTION- Ethernet function Embedded ethernet
OPERATION GUIDANCE FUNCTION - EZ Guidei (Conversational Programming Solution)- EZ Operation package
OPTIONAL SPECIFICATIONS
INTERPOLATION FUNCTIONS- Multi step skip
FEED FUNCTION- Advanced preview control
TOOL FUNCTION / TOOL COMPENSATION- Tool offset pairs 99 [200] pairs
DATA INPUT / OUTPUT- Fast ethernet / Data server- Automatic data backup
OPERATION- Manual handle feed 2unit- Manual handle interruption- Part program storage size 5120m (2MB)
ROBOT INTERFACE- Robot interface with PMC I / O module (Hardware between PMC I / O modules)- Robot interface with PROFIBUS-DP
[ ] : LYNX 220LSY only* : According to the business contract made Doosan,
some regions haveTool Load Monitoring system as option.
Head OfficeDoosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699
Doosan Infracore America Corp.19A Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501
Doosan Infracore Germany GmbHEmdener Strasse 24 D-41540 Dormagen Germany Tel : ++49-2133-5067-100 Fax : ++49-2133-5067-001
Doosan Infracore Yantai Co., LTD13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389
- The specifications and information above-mentioned may be changed without prior notice.- For more details, please contact Doosan.
EN 140829SU
http://www.doosaninfracore.com/machinetools/