UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand...
Transcript of UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand...
![Page 1: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/1.jpg)
Dan Putzstuck
(716) 375-3547
UG/Post and NX TurningUG/Post and NX TurningTools for Greater ProductivityTools for Greater Productivity
![Page 2: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/2.jpg)
2PLM World ‘06
AgendaAgenda
Dresser-Rand Company
Change process to NX turning architecture and Postbuilder
Demonstration
Wrap up - successes, additional benefits
Questions
![Page 3: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/3.jpg)
3PLM World ‘06
A leader in energy conversion technology, positioned to deliver complete solutions -- from initial concept to equipment retirement -- for the oil and gas, refining, and petrochemical industries.
DresserDresser--RandRand
Global Operations Corporate CenterHouston, TX
![Page 4: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/4.jpg)
4PLM World ‘06
DD--R Centrifugal CompressorsR Centrifugal CompressorsDATUM compressors
Used in oil & gas production, refining, and petrochemical applications to produce fuels, lubricants, plastics, fibers, fertilizer and chemicals
Flow rates up to 500,000 acfm
Pressure to 10,500 psia
®
![Page 5: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/5.jpg)
5PLM World ‘06
DD--R Reciprocating CompressorsR Reciprocating Compressors
Process Reciprocating CompressorsUsed in petroleum and refinery applications, chemical manufacturing and oil & gas productionPower ranges to 38,000 HP
![Page 6: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/6.jpg)
6PLM World ‘06
Single & Multi Stage Steam TurbinesSingle & Multi Stage Steam Turbines
Single and Multi Stage Steam Turbines
Used in process compressor drivers; chiller drivers; pump, fan and mill drives; power generation, naval applications
Sugar Mill
![Page 7: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/7.jpg)
7PLM World ‘06
DresserDresser--RandRand’’s Global Presences Global Presence
Suzhou,Jiangsu Province, PRC
Kemanan,Terengganu, Malaysia
Cilegon, Banten, Indonesia
Naroda, India
Chirchik, Uzbekistan
Kongsberg, Norway Spijkenisse,The Netherlands
Oberhausen,Germany
Aberdeen,Scotland, U.K.
Le Havre,France
Genoa, Italy
Campinas - SP, Brazil
Campinas, Brazil
Maracaibo, Edo.Zulia Venezuela
Edmonton, AlbertaCanada
Seattle, WA
Rancho Dominguez, CA
Chula Vista, CA
Tulsa, OK
Midland, TX
Houston, TXBaton Rouge, LAChesapeake, VA
Naperville, ILHamilton, OH
Horsham, PA
Olean, NYWellsville, NYPainted Post, NY
WW Corporate Center
Regional CentersKuala Lumpur, MalaysiaHouston, TexasLe Havre, France
Houston, TX
Service Centers (24)
Global OperationsOlean, Wellsville, Painted Post, New YorkMillbury, MassachusettsBurlington, IowaHouston, TexasOberhausen, GermanyBielefeld, GermanyLe Havre, FranceKongsberg, NorwayCampinas, BrazilNaroda, India
Kuala Lumpur, Malaysia
Burlington, IA Millbury, MA
Bielefeld,Germany
![Page 8: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/8.jpg)
8PLM World ‘06
DresserDresser--RandRand’’s Global Presences Global Presence
World class manufacturing operations
OLEAN, PAINTED POST, WELLSVILLENew York *
OLEAN, PAINTED POST, WELLSVILLENew York *HOUSTON
TexasHOUSTON
Texas
CAMPINASBrazil
CAMPINASBrazil
BURLINGTONIowa*
BURLINGTONIowa*
MILLBURYMassachusetts *
MILLBURYMassachusetts *
* NORTH AMERICAN OPERATIONS
![Page 9: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/9.jpg)
9PLM World ‘06
NAO NC support NAO NC support
160 NC machines
2-axis through 5-axis
Approx. 23,000 new NC programs / year
30 NC programmers
Approx. half of NC machines involve turning
70% of programs are turning programs
![Page 10: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/10.jpg)
10PLM World ‘06
Why change? Why change?
Legacy lathe inefficiencies
Tcl Posts - developed in V15
Built in traps - such as bad notes
Safety issues - tool probing
Lack of consistency in tape output format
Most importantly - support improvement initiatives
![Page 11: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/11.jpg)
11PLM World ‘06
Direction Direction
NX turning architecture
Postbuilder - version control
Eliminate as many “traps” as possible
Safer
Consistency in tape format output
Get the most out of the software
![Page 12: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/12.jpg)
12PLM World ‘06
Main areas of understandingMain areas of understanding
NX turning architecture
Tcl language
UG/Post Postbuilder
NC machine requirements
![Page 13: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/13.jpg)
13PLM World ‘06
NX Turning ArchitectureNX Turning Architecture
Parent / Child structure
In-process Workpiece (IPW)
Great material removal animation
There is a learning curve
It is worth it
![Page 14: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/14.jpg)
14PLM World ‘06
TclTcl LanguageLanguage
Rapid development - get job done faster
Cross platform applications - tcl 8.0.4 for windows
Easy to learn
Easy to deploy
It’s free
![Page 15: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/15.jpg)
15PLM World ‘06
UG/Post UG/Post PostbuilderPostbuilder
GUI
Many helpful tools
Debugger
MOM Variables Browser
Event flow
Initial Move and First Move logic
![Page 16: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/16.jpg)
16PLM World ‘06
First Tool First Tool
1
23
4
5
![Page 17: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/17.jpg)
17PLM World ‘06
Continuation with Same Tool Continuation with Same Tool
1
2
![Page 18: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/18.jpg)
18PLM World ‘06
Change to New Tool Change to New Tool
1
2
3
![Page 19: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/19.jpg)
19PLM World ‘06
Machine Requirements Machine Requirements
G&L twin vtl parts and processes - G&L 8000 control
Tool probe capability
Spindle control
Must be near the workpiece before turning on
Machining across center requirements
Grooving tools - each offset has corresponding tool number
Established tape format requirements
![Page 20: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/20.jpg)
20PLM World ‘06
G&L Twin Vertical LathesG&L Twin Vertical Lathes
![Page 21: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/21.jpg)
21PLM World ‘06
ObjectivesObjectives
Automate tool list at top of tape file
Automate operator notes
operation sequence descriptions and tooling notes
Automate tool probe cycles
Automate Crossing-Center process
Eliminate need for any startup and end commands
Maintain tape output format requirements
![Page 22: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/22.jpg)
22PLM World ‘06
DemoDemo
Legacy Lathe inefficiencies
NX architecture
Tape format requirements
HEADER Operation( before posting and after)
Automated Tool List
Automated operator notes
Tool Probing
Tool pre-selects (caveat issue)
Tool continuation
Tool definitions & naming considerations
Automated tool notes
From & Gohome point usage
Crossing center
Cross-Posting to Bert’s
How we structure out posts
Spindle considerations
![Page 23: UG/Post and NX Turning Tools for Greater Productivity Putzstuck Dresser-Rand daniel_j_putzstuck@dresser-rand.com (716) 375-3547 UG/Post and NX Turning Tools for Greater Productivity](https://reader038.fdocuments.net/reader038/viewer/2022110222/5aaba7eb7f8b9a2b4c8c543c/html5/thumbnails/23.jpg)
23PLM World ‘06
SummarySummary
Accomplished 99%
Stock notes
Programmers use it
20% increase in programmer efficiency
Cross-posting benefit
Works in NX4 (from tests so far)