Headpaint Blondes Step-By-Steps

7
NEW HEADPAINT BLONDES STEP-BY-STEPS

description

3 professional techniques for using the new Fudge Headpaint Blondes.

Transcript of Headpaint Blondes Step-By-Steps

Page 1: Headpaint Blondes Step-By-Steps

NEW HEADPAINT BLONDESSTEP-BY-STEPS

Page 2: Headpaint Blondes Step-By-Steps
Page 3: Headpaint Blondes Step-By-Steps

COLOURS USED

A—Headpaint 12.12 + 12% Catalyst Crème Developer

B—Speed Bleach + 3% Catalyst Creme Developer

C—Headpaint 9.23 + 10.0 + 3% Catalyst Crème Developer

ANGULAR MOMENTUMCOLOUR BY TRACY HAYES @ FUDGEINITIAL HAIR COLOUR

7/0

STEP 1. The hair was sectioned as shown. Formula A was applied to the mid lengths and ends throughout section 1 and developed as a first time application. Freshly mixed product is then applied to the root area.

STEP 2. Formula B was then applied to sections 2, using back to back foils to ensure an even lift. Once the desired colour has been achieved and development time is complete, rinse, shampoo and condition.

STEP 3. Then sections 2 were toned with formula C and then developed until the desired colour has been achieved. Then rinse, shampoo and condition with Fudge Colour Lock shampoo and Dynamite conditioner.

Page 4: Headpaint Blondes Step-By-Steps
Page 5: Headpaint Blondes Step-By-Steps

STEP 1. The hair was pre-bleached using formula A.

INITIAL HAIR COLOUR 7/0 WITH EXISTING BLEACH ON THE MID LENGTHS AND ENDS

STEP 4 The remaining hair was then toned with formula B.

Develop until the desired colour has been achieved, and then rinse, shampoo and condition with Fudge Colour Lock shampoo and Dynamite conditioner.

STEP 3. A further section was taken to the right hand side of the head and tinted with formula D.

STEP 2. Nine triangular triangles sections were taken on the top of the head and tinted with formulas C and D as shown.

GEOMETRIC DIMENSIONCOLOUR BY TRACY HAYES @ FUDGE

COLOURS USED

A—Speed Bleach + 6% Catalyst Crème Developer

B—40grms Headpaint 9.03 + 20grms 10.0 + 3% Catalyst Crème Developer

C—40 grms Headpaint 10.0 + 20grms 10.1 + 3% catalyst Crème Developer

D—30grms Headpaint 9.23 + 0.5grms 5.22 + 3% Catalyst Crème Developer

Page 6: Headpaint Blondes Step-By-Steps
Page 7: Headpaint Blondes Step-By-Steps

CRESCENT SYMMETRYINITIAL HAIR COLOUR 7/0 MID LENGTHS AND ENDS EXISTING BLEACH

COLOURS USED

A—Speed Bleach + 6% Catalyst Crème developer

B—Headpaint 9.23 + 10.0 + 3% Catalyst Crème Developer

C—Paintbox Pink Moon + Whiter shade of Pale

D—Paintbox Purple Haze + Whiter shade of Pale

E—Paintbox Blue Velvet + Whiter shade of Pale

F—Paintbox Green Envy + Turquoise Blue + Whiter shade of Pale

G—Paintbox Turquoise Blue + Whiter shade of Pale

COLOUR BY TRACY HAYES @ FUDGE

STEP 1. The hair was pre-bleached with formula A then toned with formula B and then gently dried.

STEP 2. Leave out a fine oval section on the top of the head and a fine section all around the hairline as shown.

STEP 3. Following the shape of the head as shown, take slices of Colours C,D,E,F and G alternating as you go, leaving a section of hair out in-between each slice.

STEP 4 Then repeat exactly the same on the opposite side, develop as per instructions.

Once development time has been completed, rinse with tepid water and condition with Fudge Colour Lock conditioner.