Hardware for Sliding Doors (Glass) - Spinea Oy2 TEH_02G/02.2014 Hardware for Sliding Doors (Glass)...
Transcript of Hardware for Sliding Doors (Glass) - Spinea Oy2 TEH_02G/02.2014 Hardware for Sliding Doors (Glass)...
Catalogue: TEH_02G
Hardware for Sliding Doors (Glass)
2TEH_02G/02.2014
Hardware for Sliding Doors (Glass)Contents
HELM GT
General Information Page 20
HELM GT-L 60 up to 60 kg leaf weight Page 22
HELM GT-S 150 up to 150 kg leaf weight Page 26
Appendix
Sample of Request for Proposal Page 70
Enquiry Form Page 71
Accessories
Flush and Pull Handles Page 66
HELM 53
General Information Page 32
HELM 53 up to 50 kg leaf weight Page 34
HELM 73
General Information Page 32
HELM 73 up to 80 kg leaf weight Page 42
HELM 120
General Information Page 52
HELM 120 up to 120 kg leaf weight Page 54
HELM 150
General Information Page 52
HELM 150 up to 150 kg leaf weight Page 62
Information
General Information Page 3
HELM Hardware for Glass Sliding Doors Page 4
HELM Accessories Page 8
HELM Modular.Concept 80
General Information Page 10
HELM Hardware-Modules Page 12
Gen
eral
Info
rmat
ion
3TEH_02G/02.2014
Hardware for Sliding Doors (Glass)General Information
Introduction
HELM hardware for glass sliding doors always offers suitable and elegant solutions for many various fields of application. High-quality materials and precise workmanship guarantee a perfect functionality and a long life. The hardware is, of course, designed for all common door sizes, single and double door constructions, as well as for leaf weights of up to 150 kg. The GT hardware (from page 20) makes the integrated mounting of fixed panels possible. On pages 5-7 you will find an overview of all hardware and their fields of application.
The hardware excels at precise rolls, simple mounting and high-quality workmanship. The HELM hardware is, of course, tested according to DIN 1527:1998.
We would specifically like to draw your attention to the HELM Modular.Concept 80 for glass sliding doors, which you will find on pages 10-19. With only one track system and various accessory modules all applications up to 80 kg leaf weight can be very easily covered.
The range is complemented by various KWS flush and pull handles for all glass doors (from page 66).
4TEH_02G/02.2014
Hardware for Sliding Doors (Glass)
Ove
rvie
w H
ard
war
e
5TEH_02G/02.2014
Overview
HELM 53 HELM 73 HELM 120 HELM 150 HELM GT-L 60 HELM GT-S 150
Leaf weight (tempered safety glass)
50 kg 80 kg 120 kg 150 kg 60 kg 150 kg
Leaf weight (LSG) ○ ○ ○ ○ ○ 150 kg
Mounting type:
ceiling mounting ● ● ● ● ● ●wall mounting ● ● ● ● ● ●directwall mounting
● ● ○ ○ ● ●
side panel fixing ○ ● ○ ○ ● ●Field of application:
residential ● ● ● ● ● ●commercial ○ ● ● ● ● ●Type of door:
single and multiple leaf
● ● ● ● ● ●
synchronised ○ ● ● ● ○ ●Damper and soft closing device types:
damper and soft closing device
○ ● ○ ○ ● ●
door catcher ● ● ● ● ● ●Track surface:
natural finish ● ● ○ ○ ○ ○silver anodised ● ● ● ● ● ●stainless steel finish anodised
● ● ○ ○ ● ●
Pelmetting
clip-on pelmetsilver anodised orstainless steel finish anodised
●1 ●1 ● ○ ●2 ●2
● = yes ○= no 1track drilled on the side 2pelmet integrated in the track system
Hardware for Sliding Doors (Glass)Overview Hardware
6TEH_02G/02.2014
Further information from page 26
HELM GT-S 150 up to 150 kg leaf weight
Trackaluminium silver anodised or stainless steel finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 6000 mm or cut to size
•forglassslidingdoorswithathicknessof8mm,10mmand12mm•alsosuitableforLSG•compactconstruction•synchronisedopening Attention: 80 mm longer track is necessary!•optionallywithdamperandsoftclosingdevice•alsorealisablewithfixedpanel
Attention: The relation of the door height to the door width may not cross 2,5:1!
HELM GT-L 60 up to 60 kg leaf weight
Trackaluminium silver anodised or stainless steel finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 6000 mm or cut to size
•forglasssliding doors with a thickness of 8 mm and 10 mm (tempered safety glass)•compactconstruction•optionallywithdamperandsoftclosingdevice•alsorealisablewithfixedpanel
Attention: The relation of the door height to the door width may not cross 2,5:1!
Further information from page 22
Further information from page 34
HELM 53 up to 50 kg leaf weight
Trackaluminium natural finish, aluminium silver anodised or stainless steel finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable constructions•manual•clip-on pelmet• single and multiple leaf constructions
Hardware for Sliding Doors (Glass)Overview Hardware
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998200.000 cycles
up to 80kg leaf weight tested according to DIN 1527:1998200.000 cycles
Ove
rvie
w H
ard
war
e
7TEH_02G/02.2014
use ofSmartStop
possible
HELM 120 up to 120 kg leaf weight
Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolley double pair, with ball bearings
Realisable constructions•manual•synchronised opening• single and multiple leaf constructions•clip-on pelmet
HELM 73 up to 80 kg leaf weight
Trackaluminium natural finish, aluminium silver anodised or stainless steel finish anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for wall or ceiling mounting
Trolleydouble pair, with ball bearings
Realisable constructions•manual•clip-on pelmet•synchronised opening• single and multiple leaf constructions•SmartStop
Further information from page 42
Further information from page 54
HELM 150 up to 150 kg leaf weight
Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting
Trolleydouble pair, with ball bearings
Realisable constructions• manual• single and multiple leaf constructions
Further information from page 62
Hardware for Sliding Doors (Glass)Overview Hardware
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998200.000 cycles
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
8TEH_02G/02.2014
HELM pelmet for glass door clamps
Aluminium pelmets ensure an attractive look wherever HELM hardware is used. HELM pelmets are simply clipped on the door clamps outer face.
Product advantages•simplemounting•pelmettingonbothsidespossible
Further information from page 36
SmartStop for HELM 73
We put an end to sliding leaves that close noisily and bounce back. Thanks to our new SmartStop system (HELM 73) for the use on one or both sides we stop each door finishively and pull it noiselessly into the final position.
This piece of hardware makes sure that closed leaves remain closed.
Product advantages•doorissloweddowntowardsthestoppositionsandpulledintothe finalposition.•gentle,quietandcomfortableclosing•slowingdowncanbefinishedononeorbothsides•mountinginthetrackprofile•usedaircylinderismaintenance-free•doorisheldinthestopposition,thusanadditionaldoorcatcherisnot required
Further information from page 47
Hardware for Sliding Doors (Glass)Accessories
HELMatic for HELM 73, HELM 120 and HELM 150
HELMatic moves doorsThe new generation of drives for HELM 73, HELM 120 and HELM 150
With the HELMatic 230-volt drive sliding doors and light sliding gates up to 150 kg door weight can be opened and closed fully automatically. With wireless push-button, motion detector as well as comfortable push&go function, every sliding door can be operated without effort using the HELMatic. In case of power failure the door can be pushed open manually.
The HELMatic was rated with the test result "good" in the user text of the "Deutsche Gesellschaft für Gerontotechnik® (GGT)" (German service company for gerontological technology) and is certified according to DIN 18650 – low energy operation.
HELMatic 230 volt drive
Motion detector
Acc
esso
ries
9TEH_02G/02.2014
HELM projection track for pelmetting
The projection track for pelmetting has to be combined with the track for ceiling mounting. Distances as frames or baseboards can be easily leveled. Easy assembly with enclosed screws.
Product advantages• completesystemincludingpelmetinsameappearance• easyinstallation
Further information from page 14
HELM spacer profile
The spacer profile is used to extend distances to the wall when there are frames or baseboards. Wooden substructions are no longer needed. This simplifies the installation and makes a more attactive look.
Product advantages• nosubstructionsnecessary• easyinstallation
Further information from page 14
Pull handles and Flush handles
The range of various KWS flush and pull handles for all glass doors from page 67 - 69 as well as in the KWS catalogues.
Further information from page 66
Hardware for Sliding Doors (Glass)Accessories
10TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
HEL
M M
od
ula
r.Co
nce
pt
80
11TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
Sliding doors of glass can be used in a wide range of contexts in both living and working environments.
As well as their traditional application as normal doors for rooms, they are increasingly being used as room dividers. Regardless of whether they are used to separate kitchen areas, walk-in wardrobes oraspartofofficepartitions,thepossibilitiesarenumerous,andthereforesoaretherangeofcorrespondingfittingsystems.
For this reason HELM has developed the compact yet flexible Modular.Concept 80. The use of just one track system with a range of accessory modules enables us to respond to different individual requirements.
From simple single timber doors up to the double door systems with panels of glass weighing 80 kg and synchronised opening a wide range of applications can be delivered quickly and easily.
The Modular.Concept 80 is based on our tried and tested HELM 53 andHELM73fittingswhichhavebeencontinuouslydevelopedovermany years and which now have been improved by the addition of some important components (SmartStop, pelmets, synchronised operation,stainlesssteelfinishetc.).
The following list shows all available modules. Depending on the relevantapplicationandrequirements,fittingssystemsfortimberand glass doors can be compiled from this selection.
- multiple applications for glass doors, single or double door, wall, ceiling and wall pocket assembly, pelmets, projection tracks, HELM SmartStop, low headroom installation and synchronised opening and closing
- modular structure: simple price calculation, quick delivery times, compact range of stock and at the same time a wide range of different applications
- additional accessories can be easily added later
- wide range of KWS flush and pull handles
The idea
The advantages
12TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
Part no.aluminium natural finish
Part no.aluminium silver anodised
Part no.stainless steel finish anodised
for door widths of 500-700 mmtrack lenght 1300 mm
006031 006061 006036
for door widths of 710-900 mmtrack lenght 1700 mm
006032 006062 006037
for door widths of 910-1100 mmtrack lenght 2100 mm
006033 006063 006038
for door widths of 1110-1300 mmtrack lenght 2500 mm
006034 006064 006039
for door widths of 1310-1600 mmtrack lenght 3100 mm
006035 006065 006040
stock lenght 6000 mm 006050 006051 006054
Part no.aluminium natural finish
Part no.aluminium silver anodised
for door widths of 500-700 mmtrack lenght 1300 mm
00604601 00604701
for door widths of 710-900 mmtrack lenght 1700 mm
00604602 00604702
for door widths of 910-1100 mmtrack lenght 2100 mm
00604603 00604703
for door widths of 1110-1300 mmtrack lenght 2500 mm
00604604 00604704
for door widths of 1310-1600 mmtrack lenght 3100 mm
00604605 00604705
stock lenght 6000 mm 00604600 00604700
Part no.aluminium silver anodised
2 end caps 006003
HELM track no. 60 - for wall mounting with lateral drilled holes
HELM end caps - usable with HELM track no. 60
HELM track no. 60 - für ceiling mounting and for receiving the wall mounting bracket with drilled holes
These tracks are used in case of wall mounting in combination with the clip-on pelmet.
HEL
M M
od
ula
r.Co
nce
pt
80
13TEH_02G/02.2014
HELM accessories: wall mounting brackets, pocket door kids and projection tracks
HELM wall mounting bracket sets
HELM kits for pocket door installation
HELM projection track
HELM projection track
This kit is for use in conjunc-tionwiththeHELM73soffitfixtrack
Track in timber or glass door applications
Description Part no.
1 (no.) wall mounting bracket 61/01 006161
4 (nos.) wall mounting bracket 61/01 1300 mm 006163
6 (nos.) wall mounting bracket 61/01 1700 mm 006164
7 (nos.) wall mounting bracket 61/01 2100 mm 006165
8 (nos.) wall mounting bracket 61/01 2500 mm 006166
10 (nos.) wall mounting bracket 61/01 3100 mm 006167
Description Part no.
1 kit contains:x universal mounting brackets(please specify according to your track length)1 bottom guide no. 70,1 latch screw
4 universal mounting brackets no. 73 for 1300 mm 006173
6 universal mounting brackets no. 73 for 1700 mm 006174
7 universal mounting brackets no. 73 for 2100 mm 006175
8 universal mounting brackets no. 73 for 2500 mm 006176
10 universal mounting brackets no. 73 for 3100 mm 006177
Description Part no.
1 projection track, 1300 mm long for door widths of 500-700 mm
00601660
1 projection track, 1700 mm longfor door widths of 710-900 mm
00601760
1 projection track, 2100 mm longfor door widths of 910-1100 mm
00602160
1 projection track, 2500 mm longfor door widths of 1110-1300 mm
00602560
2 end caps for projection track 006001
1 projection track, 6000 mm stock length 00601060
1 projection track, cut to length, per metre 00601160
Description Part no.
1 projection track, 1300 mm long for door widths of 500-700 mm
00602760
1 projection track, 1700 mm longfor door widths of 710-900 mm
00602860
1 projection track, 2100 mm longfor door widths of 910-1100 mm
00602960
1 projection track, 2500 mm longfor door widths of 1110-1300 mm
00603060
2 end caps for projection track 006002
1 projection track, 6000 mm stock length 00601460
1 projection track, cut to length, per metre 00601560
HELM Modular.Concept 80up to 80 kg leaf weight
aluminium silver anodised
Supplied complete with screws and washers
Interlengths and lengths from 2500 mm are available as dimension lengths (Part No. 00601560)
The projection track is installed withthesoffitfixtrackno.60 silver anodised
aluminium stainless steel finish anodised
Supplied complete with screws and washers
Interlengths and lengths from 2500 mm are available as dimension lengths (Part No. 00601560)
The projection track is installed withthesoffitfixtrackno.60stainless steel finish anodised
14TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
HELM mounting parts: wall mounting bracket sets, complementary sets for pocket door installation and projection tracks
Description Part no.
2 end caps silver anodised, glass pelmets (51 x 102 x 2,5 mm) 006376
2 end caps, stainless steel finish anodised,glass pelmets (51 x 102 x 2,5 mm) 006377
Description Part no.
2 end caps silver anodised, glass pelmets (66 x 102 x 2,5 mm)
006380
2 end caps, stainless steel finish anodised,glass pelmets (66 x 102 x 2,5 mm)
006381
for clip on pelmet
in connection with spacer profile
for clip on pelmet
HELM end cap for projection track
HELM end cap for projection track
Description Part no.
1 projection track, 6000 mm stock length 006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Description Part no.
1 projection track, 6000 mm stock length 006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
aluminium silver anodised
The projection track is used in combination with track 60 with holes for ceiling mount-ing.
aluminium stainless steel finish anodised
The projection track is used in combination with track 60 with holes for ceiling mount-ing.
HELM projection track for pelmetting
HELM projection track for pelmetting
Description Part no.
1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metre,silver anodised
0063799
1 spacer profile, 6000 mm stock length, stainless steel finish anodised
006390
1 spacer profile, cut length per metre, stainless steel finish anodised
0063999
aluminium
Thespacerprofileisusedincombination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile
Description Part no.
2 end caps silver anodised, glass pelmets (56,5 x 91,5 x 2,5 mm)
006378
2 end caps, stainless steel finish anodised,glass pelmets (56,5 x 91,5 x 2,5 mm)
006379
Description Part no.
2 end caps silver anodised, glass pelmets (72 x 91,5 x 2,5 mm)
006374
2 end caps, stainless steel finish anodised,glass pelmets (72 x 91,5 x 2,5 mm)
006375
for clip on pelmet
for clip on pelmet
HELM end cap for spacer profile
HELM end cap for spacer profile double-sided
HEL
M M
od
ula
r.Co
nce
pt
80
15TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
Complete sets for glass door applications
To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass
trolleys with tandem nylon rollers (self lubricating)
HELM 53 Description Part no.
2 trolleys no. 532 glass door clamps 70 mm (for 8 mm glass TSG)2 door stops no. 65 P1 bottom guide to suite 8 mm glass
For double doorstwo sets are required.
005381
To suit double glass doors up to 80 Kg, synchronised opening of two bi-parting doors, door thickness 8 and 10 mm tem-pered safety glass, tooth belt driven
trolleys with tandem nylon rollers and integral ball race system suitable with clip on pelmet
HELM 73 synchronised Description Part no.
4 trolleys no. 734 glass door clamps 180 mm (for 8 and 10 mm glass TSG)4 door stops no. 65 P2 bottom guides no. 120 to suite 8-12 mm2 belt guides rollers 1 coupling joint for toothed belt1 tooth belt clamp
007384
1 tooth belt (not included within the set) Please specify lengthCalculation:2 x track length + 120 mm
000110017001
To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered safety glass
trolleys with tandem nylon rollers and integral ball race system
HELM 73 Description Part no.
2 trolleys no. 732 glass door clamps 180 mm (for 8 and 10 mm glass TSG)2 door stops no. 65 P1 bottom guide to suite 8-12 mm glass
For double doorstwo sets are required.
007381
To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass
trolleys with tandem nylon rollers and integral ball race system
HELM 73 Description Part no.
2 trolleys no. 732 glass door clamps 70 mm (for 8 mm glass TSG)2 door stops no. 65 P1 bottom guide to suite 8-12 mm glass
For double doorstwo sets are required.
007398
More accessories from page 19
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998200.000 cycles
tested according to DIN 1527:1998200.000 cycles
tested according to DIN 1527:1998200.000 cycles
16TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
Complete HELM 73 sets for glass door applications
More accessories from page 19
Description Part no.
2 trolleys no. 734 cover caps no. 73 round (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731901
HELM 73
Description Part no.
2 trolleys no. 734 cover caps no. 73 round (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731902
Description Part no.
2 trolleys no. 734 cover caps no. 73 squere (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731904
Description Part no.
2 trolleys no. 734 cover caps no. 73 squere (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731903
HELM 73
HELM 73
HELM 73
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
stainless steel finish To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* rounded
not suitable with clip on pelmet
stainless steel finish To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* square
not suitable with clip on pelmet
silver anodised To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* square
not suitable with clip on pelmet
silver anodised To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* rounded
not suitable with clip on pelmet
*Attention: Cover caps made of plastic, enameled in colour tone of silver anodised and stainless steel finish anodised
HEL
M M
od
ula
r.Co
nce
pt
80
17TEH_02G/02.2014
HELM Modular.Concept 80up to 80 kg leaf weight
HELM modification sets
Description Part no.
holding fixture for glass fixed panelstock length 6000 mm
006094
holding fixture for glass fixed panelcut length
006095
kit (2 pieces) end caps fortrack with glass fixed panel
006096
U pelmet, stock length 6000 mm 0058150
U pelmet, cut to length 0058151
Description Part no.
holding fixture for glass fixed panelstock length 6000 mm
006097
holding fixture for glass fixed panelcut length
006098
kit (2 pieces) end caps fortrack with glass fixed panel
006099
U pelmet, stock length 6000 mm 0058160
U pelmet, cut to length 0058161
aluminium silver anodised
Fortheconnectionwithfixedpane glass
aluminium stainlesssteel finish anodised
Fortheconnectionwithfixedpane glass
HELM holding fixture
HELM holding fixture
HELM holding fixture
Description Part no.2 glass door clamps 70 mm (for 8 mm glass)1 bottom guide to suite 8 mm glass
For double doorstwo sets are required.
005391
Description Part no.2 glass door clamps 180 mm (for 8 and 10 mm glass)1 bottom guide no. 120 (8-12 mm glass)
For double doorstwo sets are required.
007391
To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass
Conversion Kit – converts tim-ber sliding door sets into glass door sliding door sets
Suitable only for use with HELM 53
HELM modification set 53
To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered safety glass
Conversion Kit – converts tim-ber sliding door sets into glass door sliding door sets
Suitable only for use with HELM 73
HELM modification set 73
More accessories from page 19
18TEH_02G/02.2014
HELM pelmet for glass door clamps
Description Part no.
1 clip on pelmet, 1300 mm long 00607701
1 clip on pelmet, 1700 mm long 00607702
1 clip on pelmet, 2100 mm long 00607703
1 clip on pelmet, 2500 mm long 00607704
1 clip on pelmet, 6000 mm long stock length 006076
1 clip on pelmet,cut to length, per metre 006077
2 end caps for pelmet installed on single side / side fixed 006082
2 end caps for pelmet installed on both sides of the track / soffit fixed 006083
Description Part no.
1 clip on pelmet, 1300 mm long 00607901
1 clip on pelmet, 1700 mm long 00607902
1 clip on pelmet, 2100 mm long 00607903
1 clip on pelmet, 2500 mm long 00607904
1 clip on pelmet, 6000 mm long stock length 006078
1 clip on pelmet,cut to length, per metre 006079
2 end caps for pelmet installed on single side / side fixed 006084
2 end caps for pelmet installed on both sides of the track / soffit fixed 006085
Aluminium silver anodised
The pelmet is installed on sin-gle side in side mounted or on bothsidesinsoffitmountedinstallations. Matching end caps available to suit applica-tion.
For wall mounting we recom-mendtrackandspacerprofile60pre-drilledforsidefixing.(Wall mounting brackets are not required)
Aluminium satin stainless steel finish anodised
The pelmet is installed on one side in side mounted or on bothsidesinsoffitmountedinstallations. Matching end caps available to suit applica-tion.
For wall mounting we recom-mendtrackandspacerprofile60pre-drilledforsidefixing.(Wall mounting brackets are not required)
HELM clip on pelmet
HELM clip on pelmet
HELM pelmet for glass door clamps
HELM clip on pelmet
HELM Modular.Concept 80up to 80 kg leaf weight
More accessories from page 19
Aluminium silver anodised
Description Part no.
Set pelmet, up to 1500 mm door width, for 12 mm TSG 120070002012
Set pelmet, from 1500 mm up to 3000 mm door width, for 12 mm TSG 120070002013
Set pelmet, up to 1500 mm door width, for 8 and 10 mm TSG 120070002014
Set pelmet, from 1500 mm up to 3000 mm door width, for 8 and 10 mm TSG 120070002015
HEL
M M
od
ula
r.Co
nce
pt
80
19TEH_02G/02.2014
tested according to DIN 1527:1998 200.000 cycles
Damper and soft closing device suitable for max door weight 80 kg. Suitable only for use with HELM 73
HELM SmartStop
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 200
Door piston
Door piston for pocket door installation
Description Part no.1 piece SmartStop 0073501 upgrade kit one-sided with1 SmartStop and 1 Trolley 73 without guide
007351
1 upgrade kit one-sided with2 SmartStops and 2 Trolleys 73 without guide
007352
Description Part no.black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
Description Part no.1 door pistonstainless steel/plastic
006180
HELM accessories
HELM Modular.Concept 80up to 80 kg leaf weight
20TEH_02G/02.2014
HELM GT
HEL
M G
T
21TEH_02G/02.2014
HELM GT
Further information from page 26
HELM GT-S 150
up to 150 kg leaf weight without fixed panel
• forglassslidingdoorswithathicknessof8mm,10mmand12mm• doorweightsofupto150kg• alsosuitableforLSG• compactconstruction• synchronisedopeningfordoubledoorspossible• optionallywithdamperandsoftclosingdevice• wallandceilingmounting
up to 150 kg leaf weight with fixed panel
• forglassslidingdoorswithathicknessof8mm,10mmand12mm• doorweightsofupto150kg• alsosuitableforLSG• compactconstruction• synchronisedopeningfordoubledoorspossible Attention: 80 mm longer track is necessary!• optionallywithdamperandsoftclosingdevice• withfixedpanel• ceilingmounting
HELM GT-L 60
up to 60 kg leaf weight without fixed panel
• forglassslidingdoors with a thickness of 8 mm and 10 mm (tempered safety glass)• compactconstruction• optionallywithdamperandsoftclosingdevice• wallandceilingmounting
up to 60 kg leaf weight with fixed panel
• forglass sliding doors with a thickness of 8 mm and 10 mm (tempered safety glass)• compactconstruction• optionallywithdamperandsoftclosingdevice• withfixedpanel• ceilingmounting
Further information from page 22
tested according to DIN 1527:1998200.000 cycles
up to 80kg leaf weight tested according to DIN 1527:1998200.000 cycles
Attention: The relation of the door height to the door width may not cross 2,5:1!
Attention: The relation of the door height to the door width may not cross 2,5:1!
1
7
42 5
3
6
22TEH_02G/02.2014
HELM GT-L 60up to 60 kg leaf weight
Track GT-L 60
Track GT-L 60
1
1
without a fixed side panel, in stock lengths of 6000 mm or cut to size (please specify), drilled approx. every 400 mm, silver anodised aluminium or stainless steel anodised
with a fixed side panel, in stock lengths of 6000 mm or cut to size (please specify), drilled approx. every 400 mm, silver anodised aluminium or stainless steel anodised aluminium (see also T-shaped cover and clips GT-L 60)
Part. No.
stock length silver anodised ceiling mounting 0057010
cut length silver anodised ceiling mounting 0057020
stock length silver anodised wall mounting 0057011
cut length silver anodised wall mounting 0057021
stock length stainless steel finish anodised ceiling mounting 0057030
cut length stainless steel finish anodised ceiling mounting 0057040
stock length stainless steel finish anodised wall mounting 0057031
cut length stainless steel finish anodised wall mounting 0057041
Part. No.
stock length silver anodised ceiling mounting 0057110
cut length silver anodised ceiling mounting 0057111
stock length stainless steel finish anodised ceiling mounting 0057120
cut length stainless steel finish anodised ceiling mounting 0057121
Part no.
silver anodised right/left 0057345
stainless steel finish anodised, right/left 0057346for track without side panel, aluminium silver anodised or stainless steel finishanodised
End cap HELM GT-L 602
HEL
M G
T-L
60
23TEH_02G/02.2014
In stock lengths of6000 mm or cut to size (please specify), silver anodised aluminium or natural finish aluminium
Pelmet GT-L 603 Part. No.Stock length, silver anodised aluminium 0057130
Cut length, silver anodised aluminium 0057131
Stock length, natural finish aluminium 0057140
Cut length, natural finish aluminium 0057141
HELM GT-L 60up to 60 kg leaf weight
aluminium, with ball bearingsunit = 2 Trolleys
Part no.
aluminium 0057330VTrolley GT-L 604
Part no.
left 0057380
right 0057381aluminium
Door catcher GT-L 605
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium, adjustable for 8, 10 and 12 mm
Bottom guide no. 1206
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 200
Part no.
silver anodised right/left 0057315
stainless steel finish anodised, right/left 0057316for track with side panel, aluminium silver anodised orstainlesssteelfinishanodised
End cap HELM GT-L 60
Part no.
stock length silver anodised 0057150
cut length silver anodised 0057151
stock length stainless steel finish anodised
0057160
cut length stainless steel finish anodised 0057161
in stock lengths of6000 mm or cut to size, aluminium silver anodised orstainlesssteelfinishanodised
T-shaped pelmet GT-L 60
Part no.
stainless steel 0057152
for T-shaped pelmet stainless steel, unit 4 pieces
Clamps GT-L 60
More accessories for HELM GT-L 60 from page 24
7
2
24TEH_02G/02.2014
HELM GT-L 60Accessories
More accessories, flush and pull handles, from page 66
Accessories for HELM GT-L 60
Part no.
left 0057350
right 0057351in connection with damper and soft closing device
End stop GT-L 60
with release bolt
Damper and soft closing device GT-L 60
Complete sets for glass sliding doors
HELM GT-L 60
for single leaf glass sliding doors up to 60 kg leaf weight and 8 and 10 mm glass thickness (tempered safety glass), without side panel
Part no.kit GT-L 60, silver anodised, track length 2.000 mm, ceiling mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057450
kit GT-L 60, silver anodised, track length 2.000 mm, wall mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057451
kit GT-L 60, silver anodised, track length 2.500 mm, ceiling mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057452
kit GT-L 60, silver anodised, track length 2.500 mm, wall mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057453
kit GT-L 60, silver anodised, track length 3.000 mm, ceiling mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057454
kit GT-L 60, silver anodised, track length 3.000 mm, wall mounting, 8 and 10 mm tempered safety glass, without fixed panel
0057455
kit GT-L 60 stainless steel finish anodised, track length 2.000 mm, ceiling mounting,8 and 10 mm tempered safety glass, without fixed panel
0057460
kit GT-L 60 stainless steel finish anodised, track length 2.000 mm, wall mounting,8 and 10 mm tempered safety glass, without fixed panel
0057461
kit GT-L 60 stainless steel finish anodised, track length 2.500 mm, ceiling mounting,8 and 10 mm tempered safety glass, without fixed panel
0057462
kit GT-L 60 stainless steel finish anodised, track length 2.500 mm, wall mounting,8 and 10 mm tempered safety glass, without fixed panel
0057463
kit GT-L 60 stainless steel finish anodised, track length 3.000 mm, ceiling mounting,8 and 10 mm tempered safety glass, without fixed panel
0057464
kit GT-L 60 stainless steel finish anodised, track length 3.000 mm, wall mounting,8 and 10 mm tempered safety glass, without fixed panel
0057465
Part no.
stock length silver anodised 0057170
cut length silver anodised 0057171
stock length stainless steel finish anodised 0057172
cut length stainless steel finish anodised 0057173
in stock lengths of 6000 mm or cut to size, aluminium silver anodised or stainless steelfinishanodised
Bottom guide profile for side panel
Part no.
60 kg, one-sided 0057365
60 kg, two-sided 0057366
Complete set optains:1 Trach without side panel1 Pelmet 1 Trolley no. 0057330V1 Door catcher left no. 00573801 Door catcher right no. 00573811 Bottom guide no. 12010003009
3
387
1
1
69
5
6
5
4
4
HEL
M G
T-L
60
25TEH_02G/02.2014
HELM GT-L 60Technical Specifications
HELM GT-L 60, without side panel
1 Track GT-L 60, without side panelPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght, ceiling mounting – 0057010 0057030 22stock lenght, wall mounting – 0057011 0057031 22cut lenght, ceiling mounting – 0057020 0057040 22cut lenght, wall mounting – 0057021 0057041 22End cap, right/left 0057345 0057346 22
3 Pelmet GT-L 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght – 0057135 0057145 23cut lenght – 0057136 0057146 23
4 Trolley GT-L 60 Part no. Page
Aluminium 0057330V 23
5 Door catcher GT-L 60 Part-no. right
Part-no. left Page
Aluminium 0057381 0057380 23
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 23Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 23
2 Track GT-L 60, with side panelPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght, ceiling mounting – 0057110 0057120 22cut lenght, ceiling mounting – 0057111 0057121 22End cap, right/left 0057315 0057316 23
3 Pelmet GT-L 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght – 0057135 0057145 23cut lenght – 0057136 0057146 23
4 Trolley GT-L 60 Part no. Page
Aluminium 0057330V 23
5 Door catcher GT-L 60 Part-no. right
Part-no. left Page
Aluminium 0057381 0057380 23
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 23Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 23
7 T-shaped pelmet GT-L 60Part no.
silver anodised
Part no. stainless steel silver anodised
Page
stock lenght 0057150 0057160 23cut lenght 0057151 0057161 23
8 Clamps GT-L 60Part no.
silver anodised
Part no. stainless steel silver anodised
Page
for T-shaped pelmet 0057152 23
9 U-Track for side panelPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock lenght 0057170 0057172 24cut lenght 0057171 0057173 24
HELM GT-L 60, with side panel
1
7
4
2
5
3
6
26TEH_02G/02.2014
HELM GT-S 150up to 150 kg leaf weight
Track GT-S 150
Track GT-S 150
1
1
without side panel, in stock lengths of 6000 mm or cut to size, drilled approx. every 400 mm, aluminium silver anodised or stainless steelfinishanodised
with side panel, in stock lengths of 6000 mm or cut to size, drilled approx. every 400 mm, aluminium silver anodised or stainless steelfinishanodised (see also bottom track GT-S 150)
Part no.
stock length silver anodised ceiling mounting 0058010
cut length silver anodised ceiling mounting 0058020
stock length silver anodised wall mounting 0058011
cut length silver anodised wall mounting 0058021
stock length stainless steel finish anodised ceiling mounting 0058030
cut length stainless steel finish anodised ceiling mounting 0058040
stock length stainless steel finish anodised wall mounting 0058031
cut length stainless steel finish anodised wall mounting 0058041
Part no.
stock length silver anodised ceiling mounting 0058110
cut length silver anodised ceiling mounting 0058111
stock length stainless steel finish anodised ceiling mounting 0058120
cut length stainless steel finish anodised ceiling mounting 0058121
Part no.
silver anodised right/left 0058345
stainless steel finish anodised, right/left 0058346for track without side panel aluminium silver anodised orstainlesssteelfinishanodised,
End cap GT-S 1502
HEL
M G
T-S
150
27TEH_02G/02.2014
in stock lengths of6000 mm or cut to size, aluminium silver anodised orstainlesssteelfinishanodised
Pelmet GT-S 1503 Part no.
stock length silver anodised 0058135
cut length silver anodised 0058136
stock length stainless steel finish anodised 0058145
cut length stainless steel finish anodised 0058146
HELM GT-S 150up to 150 kg leaf weight
aluminium, with ball bearingunit = 2 Trolleys
Part no.
aluminium 0058330VTrolley GT-S 1504
Part no.
left 0058380
right 0058381aluminium
Door catcher GT-S 1505
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium, adjustable for 8, 10 and 12 mm
Bottom guide no. 1206
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 2007
Part no.
silver anodised 120100003013
stainless steel finish anodised 120100003014aluminium
Bottom guide profile for 12 mm LSG
More accessories for HELM GT-S 150 from page 28
Part no.
stock length silver anodised 0058150
cut length silver anodised 0058151
stock length stainless steel finish anodised 0058160
cut length stainless steel finish anodised 0058161
in stock lengths of6000 mm or cut to size, aluminium silver anodised orstainlesssteelfinishanodised
Channel pelmet HELM GT-S 150
Part no.
silver anodised right/left 0058315
stainless steel finish anodised, right/left 0058316for track with side panel, aluminium silver anodised orstainlesssteelfinishanodised
End cap GT-S 1502
28TEH_02G/02.2014
HELM GT-S 150Accessories
More accessories for HELM GT-S 150 from page 58
Accessories for HELM GT-S 150
Part no.
left 0058350
right 0058351in connection with damper and soft closing device
End stop GT-S 150
with release bolt
Damper and soft closing device GT-S 150
kit for double, synchronised glass sliding doors
Synchronised*
Complete sets for glass sliding doors
HELM GT-S 150
for single leaf glass sliding doors up to 150 kg leaf weight and 8, 10 and12 mm glass thickness, without side panel
Part no.
kit GT-S 150, silver anodised,track length 2.000 mm,ceiling mounting, without side panel
0058450
kit GT-S 150, silver anodised,track length 2.000 mm,wall mounting, without side panel
0058451
kit GT-S 150, silver anodised,track length 2.500 mm,ceiling mounting, without side panel
0058452
kit GT-S 150, silver anodised,track length 2.500 mm,wall mounting, without side panel
0058453
kit GT-S 150, silver anodised,track length 3.000 mm,ceiling mounting, without side panel
0058454
kit GT-S 150, silver anodised,track length 3.000 mm,wall mounting, without side panel
0058455
kit GT-S 150, stainless steel finish anodised, track length 2.000 mm,ceiling mounting, without side panel
0058460
kit GT-S 150, stainless steel finish anodised, track length 2.000 mm,wall mounting, without side panel
0058461
kit GT-S 150, stainless steel finish anodised, track length 2.500 mm,ceiling mounting, without side panel
0058462
kit GT-S 150, stainless steel finish anodised, track length 2.500 mm,wall mounting, without side panel
0058463
kit GT-S 150, stainless steel finish anodised, track length 3.000 mm,ceiling mounting, without side panel
0058464
kit GT-S 150, stainless steel finish anodised, track length 3.000 mm,wall mounting, without side panel
0058465
Part no.
2 deflection rollers2 wire rope connector short for top1 door driver long for bottom1 rope (12 m)
0058425
Part no.
80 kg, one-sided 0058365
80 kg, two-sided 0058366
150 kg, one-sided 0058375
150 kg, two-sided 0058376
*Attention:Due to the installation conditions of the two deflection rollers the track has to be extended on both sides by 40 mm. If there is a fixed pane (side part), the track/pane has to be extended by 40 mm on each side as well.
HEL
M G
T-S
150
29TEH_02G/02.2014
HELM GT-S 150Technical Specifications
Part no.
stock length silver anodised 0057170
cut length silver anodised 0057171
stock length stainless steel finish anodised 0057172
cut length stainless steel finish anodised 0057173
in stock lengths of 6000 mm or cut to size, aluminium silver anodised orstainlesssteelfinishanodised
Bottom guide profile for side panel
Accessories for HELM GT-S 150
More accessories, flush and pull handles, from page 66
33
25
10
65,7
10
~20 ~35
103,5
45BH
GH
X
LH
4
4
6
68
17
3
3
1
5
5
30TEH_02G/02.2014
HELM GT-S 150, without side panel
HELM GT-S 150, with side panel
HELM GT-S 150Technical Specifications
1 Track GT-S 150, without side panelPart no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock lenght, ceiling mounting – 0058010 0058030 26stock lenght, wall mounting – 0058011 0058031 26cut lenght, ceiling mounting – 0058020 0058040 26cut lenght, wall mounting – 0058021 0058041 26End cap, right/left 0058345 0058346 26
3 Pelmet GT-S 150Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock lenght – 0058135 0058145 27cut lenght – 0058136 0058 146 27
4 Trolley GT-S 150 Part no. Page
Aluminium 0058330V 27
5 Door catcher GT-S 150 Part-no. right
Part-no. left Page
Aluminium 0058381 0058380 27
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel silver anodised
Page
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 27Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 27
1 Track GT-S 150, with side panelPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght, ceiling mounting – 0058110 0058120 26cut lenght, ceiling mounting – 0058111 0058121 26End cap, right/left – 0058315 0058316 27
3 Pelmet GT-S 150Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock lenght – 0058135 0058145 27cut lenght – 0058136 0058 146 27
4 Trolley GT-S 150 Part no. Page
Aluminium 0058330V 27
5 Door catcher GT-S 150 Part-no. right
Part-no. left Page
Aluminium 0058381 0058380 27
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 27Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 27Aluminium bottom guide for 12 mm TSG 120100003013 – 120100003014 27
7 U-Pelmet GT-S 150Part no.
silver anodised
Part no. stainless steel silver anodised
Page
Lagerlänge 0058150 0058160 27Maßlänge 0058151 0058161 27
8 U-Track for side panelPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock lenght 0057170 0057172 29cut lenght 0057171 0057173 29
31TEH_02G/02.2014
32TEH_02G/02.2014
HELM 53 and HELM 73
HEL
M 5
3 an
d H
ELM
73
33TEH_02G/02.2014
Further information from page 42
HELM 73
up to 80 kg leaf weight
Trackaluminium natural finish, aluminium silver anodised or stainless steel finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 6000 mm or cut to size
Trolleydouble pair, with ball bearings
Realisable constructions•manual•clip-on pelmet•synchronised opening• single and multiple leaf constructions•SmartStop
HELM 53
up to 50 kg leaf weight
Trackaluminium natural finish, aluminium silver anodised or stainless steel finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 6000 mm or cut to size
Trolley double pair, with plain bearings
Realisable constructions•manual•clip-on pelmet• single and multiple leaf constructions
Further information from page 34
use ofSmartStop
possible
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998200.000 cycles
HELM 53 and HELM 73
15 3
4
2
6
34TEH_02G/02.2014
HELM 53up to 50 kg leaf weight
Track no. 601aluminiumnaturalfinish,aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled holes approx. every 300 - 350 mm
Part no.
stock length natural finish 006050
cut length natural finish 006052
stock length silver anodised 006051
cut length silver anodised 006053
stock length stainless steel finish anodised 006054
cut length stainless steel finish anodised 006058
Mounting parts2 Part no.
zinc-plated 006162
ceiling plate no. 61/02withfixedbolt, zinc-plated
1
2
180
4021
27
HEL
M 5
3
35TEH_02G/02.2014
Track no. 601 Part no.
stock length natural finish, drilled holes on the side
00604600
cut length natural finish, drilled holes on the side
00604611
stock length silver anodised, drilled holes on the side
00604700
cut length silver anodised, drilled holes on the side
00604710
aluminiumnaturalfinish,aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size, for direct wall mounting, with lateral drilled holes
HELM 53up to 50 kg leaf weight
More accessories for HELM 53 from page 36
for 8 mm tempered safety glass, aluminium silver anodised, 70 mm long
Glass door clamps4 Part no.
70 mm long, for 8 mm tempered safety glass
050070002023
Part no.
white 120100003011plastic, with screw and plug, for 8 mm tempered safety glass
Bottom guide6
Part no.
180 mm long, for 8 and 10 mm tempered safety glass
120070002044
for 8 and 10 mm tempered safety glass, aluminium silver anodised, 180 mm long with T-section
wall mounting bracket no. 61/01withfixedbolt, zinc-plated
Mounting parts2 Part no.
zinc-plated 006161
zinc-plated, plastic
Part no.
zinc-plated/plastic 006500Door catcher no. 65 P5
Part no.
plastic 005365
double pair with plastic plain bearing, roller body black, support screw zinc-plated
Trolley no. 533
1
4
6
2
5
3
91,5
532,5
36TEH_02G/02.2014
HELM 53Accessories
Accessories for HELM 53
aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size. The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.
Clip-on pelmet Part no.
1 clip-on pelmet,stock length silver anodised
006076
1 clip-on pelmet,cut length silver anodised
006077
2 end caps for the one-sided pelmet 91,5 x 41 mm silver anodised
006082
2 end caps for the two-sided pelmetting 91,5 x 53 mm silver anodised
006083
Part no.
1 clip-on pelmet,stock length stainless steel finish anodised
006078
1 clip-on pelmet,cut length stainless steel finish anodised
006079
2 end caps for one-sidedpelmetting 91,5 x 41 mmstainless steel finish anodised
006084
2 end caps for both-sidedpelmetting 91,5 x 53 mmstainless steel finish anodised
006085
aluminium silver anodised
Pelmet for door clampsPart no.Set pelmet, up to 1500 mm door width, for 12 mm TSG 120070002012
Set pelmet, from 1500 mm up to 3000 mm door width, for 12 mm TSG 120070002013
Set pelmet, up to 1500 mm door width, for 8 and 10 mm TSG 120070002014
Set pelmet, from 1500 mm up to 3000 mm door width, for 8 and 10 mm TSG 120070002015
HELM projection track for pelmetting
aluminium silver anodised
The projection track is used in combination with track 60 with holes for ceiling mounting.
for glass pelmets51 x 102 x 2,5 mm
HELM end cap for projection track
Part no.
2 end caps, silver anodised 006376
2 end caps, stainless steel finish anodised
006377
Part no.1 projection track, 6000 mm stock length
006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
HELM projection track for pelmetting
aluminium stainless steel finish anodised
The projection track is used in combination with track 60 with holes for ceiling mounting.
Part no.1 projection track, 6000 mm stock length
006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
More accessories for HELM 53 from page 37
HEL
M 5
3
37TEH_02G/02.2014
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium, adjustable for 8, 10 and 12 mm
Bottom guide no. 120
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 200
Door piston
door piston for pocket door installation
Part no.
1 piece door pistonstainless steel / plastic
006180
More accessories, flush and pull handles, from page 66
HELM 53Accessories
Accessories for HELM 53
in connection with spacer profile
for glass pelmets66 x 102 x 2,5 mm
HELM end cap for projection track
for glass pelmets72 x 91,5 x 2,5 mm
HELM end cap for spacer profile double-sided
for glass pelmets56,5 x 91,5 x 2,5 mm
HELM end cap for spacer profile
Part no.
2 end caps, silver anodised 006380
2 end caps, stainless steel finish anodised
006381
aluminium
Thespacerprofileisused in combination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile Part no.1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metresilver anodised
0063799
1 spacer profile, 6000 mm stock length, stainless steel finish anodised
006390
1 spacer profile, cut length per metre, stainless steel finish anodised
0063999
Part no.
2 end caps, silver anodised 006378
2 end caps, stainless steel finish anodised
006379
Part no.
2 end caps, silver anodised 006374
2 end caps, stainless steel finish anodised
006375
Further accessories
31
25
20
10
7+8
33,3
16,6
8
30
45,8
2
19
5,8
31
91,5
8
5,5
40
217+8
19
33,3
10
20
25
93,3
42
27
13
2
1
4
4
7
6
6
3
5
51
8
3
38TEH_02G/02.2014
HELM 53Technical Specifications
HELM 53HELM 53 – Wall mounting, with wall mounting bracket no. 61/01
HELM 53 – Wall mounting, track with drilled holes on the side and one-sided pelmetting
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 34cut length 006052 006053 006058 34
2 Wall mounting bracket no. 60/01 Part no. Page
zinc-plated 006166 35
3 Trolley no. 53 Part no. Page
plastic 005365 35
4 Glass door clamp Part no. Page
70 mm long, for 8 mm TSG 050070002023 35180 mm long, for 8 and 10 mm TSG 120070002044 35
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
6 Bottom guide Part no. Page
plastic 120100003011 35
7 Pelmet for glass door clamps Part no. Page
silver anodised 120070002012 36
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 34cut length, drilled holes on the side 00604611 00604710 – 34
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006076 006078 361 clip on pelmet, cut length – 006077 006079 362 end caps, one-sided – 006082 006084 36
3 Trolley no. 53 Part no. Page
plastic 005365 35
4 Glass door clamp Part no. Page
70 mm long, for 8 mm TSG 050070002023 35180 mm long, for 8 and 10 mm TSG 120070002044 35
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
6 Bottom guide Part no. Page
plastic 120100003011 35
8
10
20
25
27
3153
91,5
93,3
5,5
33,3
40
21
137+8
1
3
5
6
4
8
3115
57
40
21
27
114
91,5
18
~28
8
16
1020
25
494
~5,5
91,8
1
3
5
6
4
8
8
10
HEL
M 5
3
39TEH_02G/02.2014
HELM 53Technical Specifications
HELM 53HELM 53 – Ceiling mounting, with double-sided pelmetting
HELM 53 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 34cut length, drilled holes on the side 00604611 00604710 – 34
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006076 006078 361 clip on pelmet, cut length – 006077 006079 36
10 Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 spacer profile, stock length – 006370 006390 371 spacer profile, cut length – 0063799 0063999 372 end caps – 006378 006379 37
3 Trolley no. 53 Part no. Page
plastic 005365 35
4 Glass door clamp Part no. Page
70 mm long, for 8 mm TSG 050070002023 35180 mm long, for 8 and 10 mm TSG 120070002044 35
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
6 Bottom guide Part no. Page
plastic 120100003011 35
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 34cut length 006052 006053 006058 34
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
2x1 clip on pelmet, stock length – 006076 006078 362x1 clip on pelmet, cut length – 006077 006079 362 end caps, two-sided – 006083 006085 36
3 Trolley no. 53 Part no. Page
plastic 005365 35
4 Glass door clamp Part no. Page
70 mm long, for 8 mm TSG 050070002023 35180 mm long, for 8 and 10 mm TSG 120070002044 35
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
6 Bottom guide Part no. Page
plastic 120100003011 35
51,5319,5
102,3
91,511
440
21
27
~5,5
16
8
25
10
20
12,5
~22
35,6
4
1 3
4
5
8
6
9
40TEH_02G/02.2014
HELM 53Technical Specifications
HELM 53HELM 53 – Wall mounting (with projection track and pelmetting)
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 34cut length 006052 006053 006058 34
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 clip on pelmet, stock length – 006076 006078 361 clip on pelmet, cut length – 006077 006079 36
9 Projection trackPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedSeite
1 Projection track, stock length – 006350 006330 361 Projection track, cut length – 0063599 006399 361 Srew set - 006351 362 End caps – 006376 006377 36
3 Trolley no. 53 Part no. Page
plastic 005365 35
4 Glass door clamp Part no. Page
70 mm long, for 8 mm TSG 050070002023 35180 mm long, for 8 and 10 mm TSG 120070002044 35
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 35
6 Bottom guide Part no. Page
plastic 120100003011 35
HEL
M 5
3
41TEH_02G/02.2014
15 3
4
2
6
7
42TEH_02G/02.2014
use ofSmartStop
possible
HELM 73up to 80 kg leaf weight
Track no. 601aluminiumnaturalfinish,aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled holes approx. every 300 - 350 mm
Part no.
stock length natural finish 006050
cut length natural finish 006052
stock length silver anodised 006051
cut length silver anodised 006053
stock length stainless steel finish anodised 006054
cut length stainless steel finish anodised 006058
Mounting parts2 Part no.
zinc-plated 006162
ceiling plate no. 61/02withfixedbolt, zinc-plated
1
2
180
4021
27
HEL
M 7
3
43TEH_02G/02.2014
for 8 and 10 mm tempered safety glass, aluminium silver anodised, 180 mm long with T-section
Glass door clamp4 Part no.
180 mm long, for 8 and 10 mm tempered safety glass
120070002044
180 mm long, for 12 mm tempered safety glass
120070002045
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium, adjustable for 8, 10 and 12 mm
Bottom guide no. 1206
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 2007
Trolley no. 733 Part no.
plastic 007365
double pair with ball bearing, roller body white, without flange, support screw zinc-plated
zinc-plated, plastic
Part no.
zinc-plated/plastic 006500Door catcher no. 65 P5
HELM 73up to 80 kg leaf weight
More accessories for HELM 73 from page 44
Track no. 601 Part no.
stock length natural finish, drilled holes on the side
00604600
cut length natural finish, drilled holes on the side
00604611
stock length silver anodised, drilled holes on the side
00604700
cut length silver anodised, drilled holes on the side
00604710
aluminiumnaturalfinish,aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size, for direct wall mounting, with lateral drilled holes
wall mounting bracket no. 61/01withfixedbolt, zinc-plated
Mounting parts2 Part no.
zinc-plated 006161
4
6
7
3
5
1
2
91,5
532,5
44TEH_02G/02.2014
HELM 73Accessories
Accessories for HELM 73
HELM projection track for pelmetting
HELM projection track for pelmetting
aluminium silver anodised
The projection track is used in combination with track 60 with holes for ceiling mounting.
aluminium stainless steel finish anodised
The projection track is used in combination with track 60 with holes for ceiling mounting.
for glass pelmets51 x 102 x 2,5 mm
HELM end cap for projection track
Part no.
2 end caps, silver anodised 006376
2 end caps, stainless steel finish anodised
006377
Part no.1 projection track, 6000 mm stock length
006350
1 projection track, cut length per metre 0063599
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
Part no.1 projection track, 6000 mm stock length
006330
1 projection track, cut length per metre 0063399
1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm
006351
aluminium silver anodised
Pelmet for glass door clamps
aluminium silver anodised orstainlesssteelfinishanodised, in stock lengths of 6000 mm or cut to size. The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.
Clip-on pelmet Part no.
1 clip-on pelmet,stock length silver anodised
006076
1 clip-on pelmet,cut length silver anodised
006077
2 end caps for the one-sided pelmet 91,5 x 41 mm silver anodised
006082
2 end caps for the two-sided pelmetting 91,5 x 53 mm silver anodised
006083
Part no.
1 clip-on pelmet, stock length stainless steel finish anodised
006078
1 clip-on pelmet,cut length stainless steel finish anodised
006079
2 end caps for one-sidedpelmetting 91,5 x 41 mmstainless steel finish anodised
006084
2 end caps for both-sidedpelmetting 91,5 x 53 mmstainless steel finish anodised
006085
Part no.Set pelmet, up to 1500 mm door width, for 12 mm TSG 120070002012
Set pelmet, from 1500 mm up to 3000 mm door width, for 12 mm TSG 120070002013
Set pelmet, up to 1500 mm door width, for 8 and 10 mm TSG 120070002014
Set pelmet, from 1500 mm up to 3000 mm door width, for 8 and 10 mm TSG 120070002015
HEL
M 7
3
45TEH_02G/02.2014
HELM 73Accessories
Accessories for HELM 73
in connection with spacer profile
for glass pelmets66 x 102 x 2,5 mm
HELM end cap for projection track
for glass pelmets, 72 x 91,5 x 2,5 mm
HELM end cap for spacer profile double-sided
for glass pelmets, 56,5 x 91,5 x 2,5 mm
HELM end cap for spacer profile
aluminium
Thespacerprofileis used in combination with track no. 60 with holes on the side for wall mounting.
HELM spacer profile
Part no.
2 end caps, silver anodised 006380
2 end caps, stainless steel finish anodised
006381
Part no.1 spacer profile, 6000 mm stock length, silver anodised
006370
1 spacer profile, cut length per metresilver anodised
0063799
1 spacer profile, 6000 mm stock length, stainless steel finish anodised
006390
1 spacer profile, cut length per metre, stainless steel finish anodised
0063999
Part no.
2 end caps, silver anodised 006378
2 end caps, stainless steel finish anodised
006379
Part no.
2 end caps, silver anodised 006374
2 end caps, stainless steel finish anodised
006375
Single components for double doors synchronised
Part no.
kit for double door synchronised 007325
2 deflection rollers1 coupling joint for tooth belt1 tooth belt clamp 4 support screws M8 x 45(without tooth belt)
Synchronised*
Part no.
tooth belt, sold by metre 000110017001
calculation: tooth belt length =2 x track length + 120 mm
sold by metre, black
Tooth belt
*Attention:Due to the installation conditions of the two deflection rollers the track has to be extended on both sides by 65 mm. If there is a fixed pane (side part), the track/pane has to be extended by 65 mm on each side as well.
More accessories for HELM 73 from page 46
46TEH_02G/02.2014
HELM 73Accessories
Accessories for HELM 73 - Sets
More accessories for HELM 73 from page 47
Description Part no.
2 trolleys no. 734 cover caps no. 73 round (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731901
HELM 73
Description Part no.
2 trolleys no. 734 cover caps no. 73 round (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731902
Description Part no.
2 trolleys no. 734 cover caps no. 73 squere (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731904
Description Part no.
2 trolleys no. 734 cover caps no. 73 squere (TSG/LSG)2 flange incl. mounting material and support screws M8 x 55 mm2 door stops no. 65 P1 bottom guide no. 120 to suite 8-12 mm
For double doorstwo sets are required.
00731903
HELM 73
HELM 73
HELM 73
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
use ofSmartStop
possible
stainless steel finish To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* rounded
not suitable with clip on pelmet
stainless steel finish To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* square
not suitable with clip on pelmet
silver finish To suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* square
not suitable with clip on pelmet
silver finishTo suit a single glass door up to 80 kg, door thickness 8 and 10 mm tempered/laminated safety glass
cover caps* rounded
not suitable with clip on pelmet
*Attention: Cover caps made of plastic, enameled in colour tone of silver anodised and stainless steel finish anodised
HEL
M 7
3
47TEH_02G/02.2014
Damper and soft closing device integrated in the track up to 80 kg leaf weight.
SmartStop Part no.
1 piece SmartStop 007350
1 upgrade kit one-sided with1 SmartStop and 1 Trolley no. 73 without guide
007351
1 upgrade kit one-sided with2 SmartStops and 2 Trolleys no. 73 without guide
007352
Spring-loaded door piston
Door piston for pocket door installation
Part no.
1 piece door pistonstainless steel / plastic
006180
HELM 73Accessories
Accessories for HELM 73
More accessories, flush and pull handles, from page 66
tested according to DIN 1527:1998 200.000 cycles
aluminium silver anodised
For the connection with fixedpaneglass
HELM holding fixture
aluminium stainlesssteel finish anodised
For the connection with fixedpaneglass
Accessories holding fixture for HELM 73
Description Part no.
holding fixture for glass fixed panelstock length 6000 mm
006094
holding fixture for glass fixed panelcut length
006095
kit (2 pieces) end caps fortrack with glass fixed panel
006096
U pelmet, stock length 6000 mm 0058150
U pelmet, cut to length 0058151
Description Part no.
holding fixture for glass fixed panelstock length 6000 mm
006097
holding fixture for glass fixed panelcut length
006098
kit (2 pieces) end caps fortrack with glass fixed panel
006099
U pelmet, stock length 6000 mm 0058160
U pelmet, cut to length 0058161
Part no.
stock length silver anodised 0057170
cut length silver anodised 0057171
stock length stainless steel finish anodised 0057172
cut length stainless steel finish anodised 0057173
in stock lengths of 6000 mm or cut to size, aluminium silver anodised orstainlesssteelfinishanodised
Bottom guide profile for side panel
33
25
21
40
10
31
9+8
1933,3
~5
11
91,5
93,3
42
27
10[8]
4
6
3
5
1
8
33
25
21
40
10
31
9+8
1933,3
~5
11
91,5
93,3
42
27
10[8]
2
1
3
4
5
7
6
4
6
3
5
1
8
48TDH_02G/02.2014
HELM 73Technische Angaben
HELM 53HELM 73 – Wandmontage, mit Wandwinkel Nr. 61/01
HELM 73 – Wandmontage, mit seitlich gebohrter Laufschiene und einseitiger Verblendung
1 Laufschiene Nr. 60 Art.-Nr. pressblank
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiert
Seite
Lagerlänge 006050 006051 006054 42Maßlänge 006052 006053 006058 42
2 Befestigungen Art.-Nr. Seite
Wandwinkel Nr. 61/01, galv. verzinkt 006161 43
3 Rollapparat Nr. 73 Art.-Nr. Seite
Kunststoff 007365 43
4 Glasklemmstück Art.-Nr. Seite
180 mm lang, für 8 und 10 mm ESG 120070002044 43180 mm lang, für 12 mm ESG 120070002045 43
5 Fangstopper Nr. 65 P Art.-Nr. Seite
galvanisch verzinkt/Kunststoff 006500 43
6 Untere Anschlagpuffer/Führung Art.-Nr. schwarz
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiertSeite
U. Anschlagpuffer Nr. 200 200040006001 200040006002 200040006003 43U. Führung Nr. 120 120100003008 120100003009 120100003010 43
7 Blende für Glasklemmstück Art.-Nr. Seite
Aluminium EV1 eloxiert 120070002012 44
1 Laufschiene Nr. 60Art.-Nr.
pressblankArt.-Nr.
EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiert
Seite
Lagerlänge, seitlich gebohrt 00604600 00604700 – 42Maßlänge, seitlich gebohrt 00604611 00604710 – 42
8 Blende zum Aufklipsen Art.-Nr. pressblank
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiertSeite
1 Blende zum Aufklipsen, Lagerlänge – 006076 006078 441 Blende zum Aufklipsen, Maßlänge – 006077 006079 442 Abdeckkappen, einseitig – 006082 006084 44
3 Rollapparat Nr. 73 Art.-Nr. Seite
Kunststoff 007365 43
4 Glasklemmstück Art.-Nr. Seite
180 mm lang, für 8 und 10 mm ESG 120070002044 43180 mm lang, für 12 mm ESG 120070002045 43
5 Fangstopper Nr. 65 P Art.-Nr. Seite
galvanisch verzinkt/Kunststoff 006500 43
6 Untere Anschlagpuffer/Führung Art.-Nr. schwarz
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiertSeite
U. Anschlagpuffer Nr. 200 200040006001 200040006002 200040006003 43U. Führung Nr. 120 120100003008 120100003009 120100003010 43
48TEH_02G/02.2014
HELM 73Technical Specifications
HELM 53HELM 73 – Wall mounting, with wall mounting bracket no. 61/01
HELM 73 – Wall mounting, track with drilled holes on the side and one-sided pelmetting
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 42cut length 006052 006053 006058 42
2 Wall mounting bracket no. 60/01 Part no. Page
zinc-plated 006161 43
3 Trolley no. 73 Part no. Page
plastic 007365 43
4 Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43180 mm long, for 12 mm TSG 120070002045 43
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 43
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
7 Pelmet for glass door clamps Part no. Page
silver anodised 120070002012 44
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 42cut length, drilled holes on the side 00604611 00604710 – 42
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 clip on pelmet, stock length – 006076 006078 441 clip on pelmet, cut length – 006077 006079 442 end caps, one-sided – 006082 006084 44
3 Trolley no. 73 Part no. Page
plastic 007365 43
4 Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43180 mm long, for 12 mm TSG 120070002045 43
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 43
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
3115
57
40
21
27
134
91,5
18
~26[27]~5
10[8]
16
1025
33
1,8
514
1
3
5
6
4
10
33
1025
27
10[8]
~5
93,3
91,5
3153
2111
409+8
33,3 1
88
3
4
5
6
HEL
M 7
3
49TEH_02G/02.2014
HELM 73Technical Specifications
HELM 53HELM 73 – Ceiling mounting, with pelmetting on both sides
HELM 73 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 42cut length, drilled holes on the side 00604611 00604710 – 42
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 clip on pelmet, stock length – 006076 006078 441 clip on pelmet, cut length – 006077 006079 44
10 Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 spacer profile, stock length – 006370 006390 451 spacer profile, cut length – 0063799 0063999 452 end caps, one-sided – 006378 006379 45
3 Trolley no. 73 Part no. Page
plastic 007365 43
4 Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43180 mm long, for 12 mm TSG 120070002045 43
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 43
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 42cut length 006052 006053 006058 42
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
2x1 clip on pelmet, stock length – 006076 006078 442x1 clip on pelmet, cut length – 006077 006079 442 end caps, one-sided – 006083 006085 44
3 Trolley no. 73 Part no. Page
plastic 007365 43
4 Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43180 mm long, for 12 mm TSG 120070002045 43
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 43
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
15 31 1572
91,5
93,3
36,850
,8
17,5
4021
27
2,5
10[8]
10
25
33
~20~26[28]
6
51,5319,5
102,3
91,513
440
21
27
~516
10[8]
33
1025
12,5
~21[22]
37,6
4
1
1
8
1112
4
10
10
8
3
9
6
6
3
4
5
50TEH_02G/02.2014
HELM 73Technical Specifications
HELM 53HELM 73 – Wall mounting (with projection track and pelmetting)
HELM 73 – Synchronised, track with drilled holes on the side and one-sided pelmetting
1 Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 42cut length 006052 006053 006058 42
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 clip on pelmet, stock length – 006076 006078 441 clip on pelmet, cut length – 006077 006079 44
9 Projection trackPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 Projection track, stock length – 006350 006330 441 Projection track, cut length – 0063599 0063399 441 Srew set - 006351 442 End caps – 006376 006377 44
3 Trolley no. 73 Part no. Page
plastic 007365 43
4 Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43180 mm long, for 12 mm TSG 120070002045 43
5 Door catcher no. 65 P Part no. Page
zinc-plated/plastic 006500 43
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
stock length, drilled holes on the side 00604600 00604700 – 42
cut length, drilled holes on the side 00604611 00604710 – 42
Trolley no. 73 Part no. Page
plastic 007365 43
Glass door clamp Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002044 43
180 mm long, for 12 mm TSG 120070002045 43
Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
1 clip on pelmet, stock length – 006076 006078 44
1 clip on pelmet, cut length – 006077 006079 44
Spacer profilePart no.
natural finishPart no.
silver anodised
Part no. stainless steel silver anodised
Page
2x1 spacer profile, stock length – 006370 006078 45
2x1 spacer profile, cut length – 0063799 006079 45
End caps f. spacer profile, double-sided – 006374 006375 45
HELM 73 Synchronised Part no. Page
Set 007325 45optains: 2 deflection rollers, 1 coupling joint for tooth belt, 1 tooth belt clamp, 4 support screws M8 x 45
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel silver anodised
Page
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43
Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 43
1
3
6
4
8
10
11
12Calculation for synchronised: tooth belt length = 2 x track length + 120 mmTooth belt (sold by metre) 000110017001
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 42
cut length 006052 006053 006058 42
Set HELM 73Part no.
silver anodised
Part no. stainless steel silver anodised
Page
End cap rounded 00731901 00731902 46End cap squere 00731903 00731904 46
Set optains: – 2 trolley no. 73 – 4 cover caps (ESG/VSG), – 2 flange incl. mounting material and support screw M8 x 55 mm – 2 door stop no. 65 P, – 1 bottom guide no. 120 (8-12 mm)
For double doors two sets are required.
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120* 120100003008 120100003009 120100003010 43
1
6
13
1 5
34
8
14
15
6
HEL
M 7
3
51TEH_02G/02.2014
HELM 73Technical Specifications
HELM 53HELM 73 – Ceiling mounting, with pelmetting on both sides (Flange for TSG/LSG glass)
Calculation for synchronised: tooth belt length = 2 x track length + 120 mm
Track no. 60Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
stock length 006050 006051 006054 42
cut length 006052 006053 006058 42
Set HELM 73Part no.
silver anodised
Part no. stainless steel silver anodised
Page
End cap rounded 00731901 00731902 46End cap squere 00731903 00731904 46
Set optains: – 2 trolley no. 73 – 4 cover caps (ESG/VSG), – 2 flange incl. mounting material and support screw M8 x 55 mm – 2 door stop no. 65 P, – 1 bottom guide no. 120 (8-12 mm)
For double doors two sets are required.
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 43Aluminium bottom guide no. 120* 120100003008 120100003009 120100003010 43
1
13
6
* Included in set
HELM 73 – Ceiling mounting, with holding fixture for glass fixed panel
1 Position 1 up to 6 same as HELM 73, Wall mounting, with wall mounting bracket no. 61/01*
8 Clip on pelmetPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
1 clip on pelmet, stock length – 006076 006078 441 clip on pelmet, cut length – 006077 006079 44
14 Holding fixture (with u-pelmet)Part no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodised
Page
1 Holding fixture, stock length – 006094 006097 471 Holding fixture, cut length – 006095 006098 472 End caps – 006096 006099 471 U-pelmet, stock length – 0058150 0058160 471 U-pelmet, cut length – 0058151 0058161 47
15 U-Track for side panelPart no.
natural finishPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
stock lenght – 0057170 0057172 47cut lenght – 0057171 0057173 47
* Please see page 48
52TEH_02G/02.2014
HELM 120 and HELM 150
HEL
M 1
20 a
nd
HEL
M 1
50
53TEH_02G/02.2014
HELM 120 and HELM 150
HELM 120
up to 120 kg leaf weight
Trackaluminium silver anodisedwith drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size
Trolley double pair, with ball bearings
Realisable constructions•manual•synchronised opening• single and multiple leaf constructions•clip-on pelmet
Further information from page 54
HELM 150
up to 150 kg leaf weight
Trackaluminium silver anodisedwith drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size
Trolleydouble pair, with ball bearings
Realisable constructions• manual• single and multiple leaf constructions
Further information from page 62
tested according to DIN 1527:1998100.000 cycles
tested according to DIN 1527:1998100.000 cycles
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
15 3
4
2
7
6
54TEH_02G/02.2014
HELM 120up to 120 kg leaf weight
Track no. 1201aluminium silver anodised, in stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm
Part no.
stock length silver anodised 120020000006
cut length silver anodised 120020000010
aluminium natural finish, including locking screw, (fixingspacing:every 600 mm)
Wall mounting bracket no. 120-012 Part no.
aluminium 120010001001
Part no.
plastic/stainless steel 120050091001
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M8x45
Trolley no. 1203
HEL
M 1
20
55TEH_02G/02.2014
HELM 120up to 120 kg leaf weight
More accessories for HELM 120 from page 56
for 8, 10 and 12 mm tempered safety glass, aluminium silver anodised, 180 mm with T-section
Glass door clamps4 Part no.
180 mm long, for 8 and 10 mm tempered safety glass
120070002016
180 mm long, for 12 mm tempered safety glass
120070002021
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium, adjustable for 8, 10 and 12 mm tempered safety glass
Bottom guide no. 1206
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm tempered safety glass
Bottom end stop no. 2007
stainless steel/plastic, door catcher force adjustable
Part no.
plastic/stainless steel 120040001002Door catcher no. 120 P5
10
8
9
56TEH_02G/02.2014
HELM 120Accessories
Part no.
aluminium natural finish 120110023001
Part no.
stock length natural finish 150110003020
cut length natural finish 150110003022
stock length silver anodised 150110003007
cut length silver anodised 150110003009
Pelmets for HELM 120
aluminium natural finish for pelmet no. 150 W/D,every 700 mm
Adapter piece no. 120
Pelmets no. 150 W
for wall mounting,aluminiumnaturalfinishor aluminium silver anodised, in mill lengths of 6000 mm or cut to size
End cap no. 150 W
for wall mounting, aluminiumnaturalfinishorRAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015024
aluminium natural finish/right 150110015025
light grey/left 150110015011
light grey/right 150110015012
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
9
9
8
HEL
M 1
20
57TEH_02G/02.2014
HELM 120Accessories
More accessories for HELM 120 from page 58
Pelmet no. 150 D
for ceiling mounting, aluminiumnaturalfinishoraluminium silver anodised, in mill lengths of 6000 mm or cut to size
Part no.
stock length natural finish 150110003021
cut length natural finish 150110003023
stock length silver anodised 150110003008
cut length silver anodised 150110003010
End cap no. 150 D
for ceiling mounting, aluminiumnaturalfinishor RAL 7035 (light grey)
Part no.
aluminium natural finish/left 150110015029
aluminium natural finish/right 150110015030
light grey/left 150110015027
light grey/right 150110015028
Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.
10
9
58TEH_02G/02.2014
HELM 120Accessories
More accessories, flush and pull handles, from page 66
Part no.
kit for double door synchronised 120110022023
2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp 4 support screws M8 x 70(without tooth belt)
Synchronised
Part no.
tooth belt, sold by metre 000110017001
calculation: tooth belt length =2 x track length + 120 mm
sold by metre, black
Tooth belt
Pelmet for glass door clamps
Single parts for double door synchronised
aluminium silver anodised
Pelmet for door clampsPart no.Set pelmet, up to 1500 mm door width, for 12 mm TSG 120070002012
Set pelmet, from 1500 mm up to 3000 mm door width, for 12 mm TSG 120070002013
Set pelmet, up to 1500 mm door width, for 8 and 10 mm TSG 120070002014
Set pelmet, from 1500 mm up to 3000 mm door width, for 8 and 10 mm TSG 120070002015
Track no. 120Part no.
natural finishPart no.
silver anodised
Page
stock length – 120020000006 54cut length – 120020000010 54
Wall mounting bracket no. 120/01 Part no. Page
zinc-plated 120010001001 54
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 54
Glass door clamps Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002016 55180 mm long, for 12 mm TSG 120070002021 55
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 55
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 55Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 55
Adapter piece no. 120 Part no. Page
natural finish 120110023001 56
Pelmets/End caps no. 150 WPart no.
natural finishPart no.
silver anodisedPart no.
light grey Page
Pelmet no. 150 W, stock length 150110003020 150110003007 – 56Pelmet no. 150 W, cut length 150110003022 150110003009 – 56End cap no. 150 W, left 150110015024 – 150110015011 56End cap no. 150 W, right 150110015025 – 150110015012 56
33
10
25
10
~29
27
11,5+5
4019
4061
3453,5
125
6
3
8
7
4
5
2
1
33
10
25
10
~29
27
11,5+5
4019
4061
3453,5
125
1
2
6
6
3
3
8
7
4
4
10
5
5
2
1H
ELM
120
59TDH_02G/02.2014
HELM 120Technische Angaben
HELM 120 – Wandmontage, mit Wandwinkel Nr. 120/01
HELM 120 – Wandmontage, mit Wandwinkel Nr. 120/01 und Verblendung
1 Laufschiene Nr. 120Art.-Nr.
pressblankArt.-Nr.
EV 1 eloxiert
Seite
Lagerlänge – 120020000006 54Maßlänge – 120020000010 54
2 Befestigungen Art.-Nr. Seite
Wandwinkel Nr. 120/01 120010001001 54
3 Rollapparat Nr. 120 Art.-Nr. Seite
Kunststoff/Edelstahl-Rostfrei 120050091001 54
4 Glasklemmstück Art.-Nr. Seite
180 mm lang, für 8 und 10 mm ESG 120070002016 55180 mm lang, für 12 mm ESG 120070002021 55
5 Fangstopper Nr. 120 P Art.-Nr. Seite
Kunststoff/Edelstahl-Rostfrei 120040001002 55
6 Untere Anschlagpuffer/Führung Art.-Nr. schwarz
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiertSeite
U. Anschlagpuffer Nr. 200 200040006001 200040006002 200040006003 55U. Führung Nr. 120 120100003008 120100003009 120100003010 55
10 Blende für Glasklemmstück Art.-Nr. Seite
Aluminium EV1 eloxiert 120070002012 58
Laufschiene Nr. 120Art.-Nr.
pressblankArt.-Nr.
EV 1 eloxiert Seite
Lagerlänge – 120020000006 54Maßlänge – 120020000010 54
Befestigungen Art.-Nr. Seite
Wandwinkel Nr. 120/01 120010001001 54
Rollapparat Nr. 120 Art.-Nr. Seite
Kunststoff/Edelstahl-Rostfrei 120050091001 54
Glasklemmstück Art.-Nr. Seite
180 mm lang, für 8 und 10 mm ESG 120070002016 55180 mm lang, für 12 mm ESG 120070002021 55
Fangstopper Nr. 120 P Art.-Nr. Seite
Kunststoff/Edelstahl-Rostfrei 120040001002 55
Untere Anschlagpuffer/Führung Art.-Nr. schwarz
Art.-Nr. EV 1 eloxiert
Art.-Nr. Edelstahl-Effekt
eloxiertSeite
U. Anschlagpuffer Nr. 200 200040006001 200040006002 200040006003 55U. Führung Nr. 120 120100003008 120100003009 120100003010 55
Adapterstück Nr. 120 Art.-Nr. Seite
pressblank 120110023001 56
Blende/Abdeckkappe Nr. 150 WArt.-Nr.
pressblankArt.-Nr.
EV 1 eloxiertArt.-Nr.
Lichtgrau Seite
Blende Nr. 150 W, Lagerlänge 150110003020 150110003007 – 56Blende Nr. 150 W, Maßlänge 150110003022 150110003009 – 56Abdeckkappe Nr. 150 W, links 150110015024 – 150110015011 56Abdeckkappe Nr. 150 W, rechts 150110015025 – 150110015012 56
1
2
3
4
5
6
7
8
HEL
M 1
20
59TEH_02G/02.2014
HELM 120Technical Specifications
HELM 53HELM 120, with wall mounting brackets no. 120/01 and pelmetting of the door clamps
HELM 120, with wall mounting brackets no. 120/01 and pelmetting
1 Track no. 120Part no.
natural finishPart no.
silver anodised
Page
stock length – 120020000006 54cut length – 120020000010 54
2 Wall mounting bracket no. 120/01 Part no. Page
zinc-plated 120010001001 54
3 Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 54
4 Glass door clamps Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002016 55180 mm long, for 12 mm TSG 120070002021 55
5 Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 55
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 55Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 55
10 Pelmet for glass door clamps Part no. Page
silver anodised 120070002012 58
Track no. 120Part no.
natural finishPart no.
silver anodised
Page
stock length – 120020000006 54cut length – 120020000010 54
Wall mounting bracket no. 120/01 Part no. Page
zinc-plated 120010001001 54
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 54
Glass door clamps Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002016 55180 mm long, for 12 mm TSG 120070002021 55
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 55
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 55Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 55
Adapter piece no. 120 Part no. Page
natural finish 120110023001 56
Pelmets/End caps no. 150 WPart no.
natural finishPart no.
silver anodisedPart no.
light grey Page
Pelmet no. 150 W, stock length 150110003020 150110003007 – 56Pelmet no. 150 W, cut length 150110003022 150110003009 – 56End cap no. 150 W, left 150110015024 – 150110015011 56End cap no. 150 W, right 150110015025 – 150110015012 56
1
2
3
4
5
6
7
8
3453,5
40
11,5+5
40
10
33
10
25
934,5
27
~29
21
34
4030+5
40
21
27
10
~12 ~12
33
25
10
6
6
1112
3
3
9
7
4
4
5
5
1
1
60TEH_02G/02.2014
HELM 120Technical Specifications
HELM 53HELM 120, ceiling mounting and pelmetting
HELM 120, synchronised
Track no. 120Part no.
natural finishPart no.
silver anodised
Page
stock length – 120020000006 54cut length – 120020000010 54
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 54
Glass door clamps Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002016 55180 mm long, for 12 mm TSG 120070002021 55
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 55
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 55Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 55
HELM 73 Synchronised Part no. Page
kit for double doors synchronised 120110022023 58
optains: – 2 deflection rollers – 1 coupling joint for tooth belt – 1 tooth belt clamp – 4 support screws M8 x 70
Tooth belt (sold by metre) 000110017001 58
Calculation for syncronised: tooth belt length = 2 x track length - 120 mm
Track no. 120Part no.
natural finishPart no.
silver anodised
Page
stock length – 120020000006 54cut length – 120020000010 54
Trolley no. 120 Part no. Page
plastic/stainless steel 120050091001 54
Glass door clamps Part no. Page
180 mm long, for 8 and 10 mm TSG 120070002016 55180 mm long, for 12 mm TSG 120070002021 55
Door catcher no. 120 P Part no. Page
plastic/stainless steel 120040001002 55
Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel
finish anodisedPage
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 55Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 55
Adapter piece no. 120 Part no. Page
natural finish 120110023001 56
Pelmets/End caps no. 150 DPart no.
natural finishPart no.
silver anodisedPart no.
light grey Page
Pelmet no. 150 D, stock length 150110003021 150110003008 – 57Pelmet no. 150 D, cut length 150110003023 150110003010 – 57End cap no. 150 D, left 150110015029 – 150110015027 57End cap no. 150 D, right 150110015030 – 150110015028 57
1
3
4
5
6
7
9
1
3
4
5
6
11
12
HEL
M 1
20
61TEH_02G/02.2014
15 3
4
2
7
6
62TEH_02G/02.2014
HELM 150up to 150 kg leaf weight
Part no.
stock length silver anodised 150020000006
cut length silver anodised 150020000010
1 track no. 150, 1400 mmfor door widths of 710-900 mm
150020000013
1 track no. 150, 2100 mmfor door widths of 810-1000 mm
150020000014
1 track no. 150, 2500 mmfor door widths of 1010-1200 mm
150020000015
1 track no. 150, 3000 mmfor door widths of 1210-1500 mm
150020000016
1 track no. 150, 3300 mmfor door widths of 1510-1800 mm
150020000017
Track no. 1501aluminium silver anodised,in stock lengths of6000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: every 600 mm)
Part no.
aluminium 150030003001
Track connector no. 150-03aluminiumNote: for one track connection 2 pieces track connectors are required.
HEL
M 1
50
63TEH_02G/02.2014
HELM 150up to 150 kg leaf weight
More accessories, flush and pull handles, from page 66
Part no.
black 120100003008
silver anodised 120100003009
stainless steel finish anodised 120100003010
aluminium adjustable for 8, 10 and 12 mm
Bottom guide no. 1206
Part no.
black 200040006001
silver anodised 200040006002
stainless steel finish anodised 200040006003
aluminium, adjustable for 8, 10 and 12 mm
Bottom end stop no. 200
for 8, 10 and 12 mm tempered safety glass, aluminium silver anodised, 180 mm long
Glass door clamps4 Part no.
180 mm long, for 8 mm tempered safety glass
150070002026
180 mm long, for 10 mm tempered safety glass
150070002024
180 mm long, for 12 mm tempered safety glass
150070002025
wall mounting bracket no. 150-01, aluminium casting material, with stainless special steel screws, nut and serrated lock washers (fixingspacing:every 600 mm)
Mounting parts2 Part no.
1 piece aluminium 150010001001
7 pieces aluminium 150010001002
Part no.
1 piece aluminium 150010002001
7 pieces aluminium 150010002002
Ceiling plate no. 150-02aluminium casting material, with stainless special steel screws, nut and serrated lock washers (fixingspacing:every 600 mm)
plastic/stainless steel, Door catcher force adjustable
Part no.
plastic/stainless steel 150040001002Door catcher no. 150 P5
Part no.
plastic/stainless steel 150050091001
plastic/stainless steel, with precision ball bearing, support screw: stainless steel M10x55
Trolley no. 1503
44
2546
16+1
2
27
52
33
10
10
33
25
1
4
6
3
5
2
64TEH_02G/02.2014
HELM 150Technical Specifications
HELM 53HELM 150, with wall mounting brackets no. 150/01
1 Track no. 150Part no.
natural finishPart no.
silver anodised Page
stock length – 150020002006 62cut length – 150020002010 62
2 Wall mounting bracket no. 150/01 Part no. Page
zinc-plated 150010001001 63
3 Trolley no. 150 Part no. Page
plastic/stainless steel 150050091001 63
4 Glass door clamp Part no. Page
180 mm long, for 8 mm ESG 150070002026 63180 mm long, for 10 mm ESG 150070002024 63180 mm long, for 12 mm ESG 150070002025 63
5 Door catcher no. 150 P Part no. Page
plastic/stainless steel 150040001002 63
6 Bottom GuidePart no.
blackPart no.
silver anodised
Part no. stainless steel silver anodised
Page
Aluminium bottom end stop no. 200 200040006001 200040006002 200040006003 63Aluminium bottom guide no. 120 120100003008 120100003009 120100003010 63
HEL
M 1
50
65TEH_02G/02.2014
66TEH_02G/02.2014
Hardware for Sliding Doors (Glass)Flush and Pull Handles
Flu
sh a
nd
Pu
ll H
and
les
67TEH_02G/02.2014
Flush handles
stainless steel brushedfor glass sliding doors of 8-12 mm glass thickness
Further information from page 68
Pull handles
stainless steel brushedas a pair for two-sided operation and as piece for one-sided operation
Further information from page 68
Hardware for Sliding Doors (Glass)Flush and Pull Handles
68TEH_02G/02.2014
KWS Flush Handles
KWS 5250..
65 x 65 mmSliding door flush handle for glass doors 8 -10 mm
4 x adhesive tape
KWS 5260..
KWS Pull Handles
D L H
Ø 25 from 200 75
KWS 8170..
as a pair for two-sided operation and as piece for one-sided operation
For more finishesandtherelevantfixingmaterialplease request the brochure "Pull Handles and Accessories".
Hardware for Sliding Doors (Glass)Flush and Pull Handles
Part no.
aluminium machined according to E 6
KWS 1 silver anodised 5250.41
KWS 2 nickel silver nodised 5250.42
brass
brushed 5250.62
polished 5250.66
stainless steel
brushed 5250.82
polished 5250.83
Ø 65 mm sliding door flushpull for glass doors 8 - 12 mm
Outer rings of light metal,brass or stainless steel, inner part of light metal anodised
Part no.
stainless steel
brushed 5260.8265 x 65 mmSliding door flush handle for glass doors 8 -10 mm
4 x adhesive tape
Hardware for Sliding Doors (Glass)Flush and Pull Handles
D L H
Ø 25 from 200 75
Part no.
stainless steel
brushed 8170.82
Flu
sh a
nd
Pu
ll H
and
les
69TEH_02G/02.2014
KWS Pull Handles
D H TL Supports
Ø 30 80 from 200 Ø 25
KWS 8179..Part no.
stainless steel
brushed 8179.82as a pair for two-sided operation and as piece for one-sided operation
Formorefinishesand the relevantfixingmaterial please request the brochure "Pull handles and Accessories".
TLTL
TL
KWS 8525..Part no.
stainless steel
brushed 8525.82
TL L H
400 300 80
500 400 80
KWS 8537..Part no.
stainless steel
brushed 8537.82Handle bar of stainless steel 40 x 10 mmHandle supports of aluminium, stainless steel finishanodised
as a pair for two-sided operation and as piece for one-sided operation
For morefinishesandtherelevantfixingmaterial please request the brochure "Pull Handles and Accessories".
TL L H
400 300 60
500 400 60
Hardware for Sliding Doors (Glass)Flush and Pull Handles
Handle bar of stainless steel 30 x 30 x 2 mmHandle supports of aluminium, stainless steel finishanodised
as a pair for two-sided operation and as piece for one-sided operation
Formorefinishesand the relevantfixingmaterialplease request the brochure "Pull Handles and Accessories".
Hardware for Sliding Doors (Glass)Flush and Pull Handles
70TEH_02G/02.2014
Sample of Request for Proposal
_______ sets HELM GT-L 60
Installation type: single leaf installation (see illustration below)
Leaf width: 900 mm
Glass thickness: 10 mm
Leaf weight 60 kg
Track mounting: ceiling mounting
Accessories: flush handle KWS 5260
Side panel: no
damper and soft closing device: yes
single leaf construction Two leaves run in one track profile and can: • bemovedindependentlyofeachother• bemovedsimultaneouslyinoppositedirections(synchronised)
Installation types
Hardware for Sliding Doors (Glass)Sample of Request for Proposal
Woelm GmbH I Hasselbecker Str. 2- 4 I D - 42579 Heiligenhaus I Tel.: + 49 (0) 20 56 - 18 - 0 I Fax: + 49 (0) 20 56 - 18 - 21
Ap
pen
dix
Ap
pen
dix
71TEH_02G/02.2014
Required information:
Hardware: ______________________
Installation type: ____________________
Leaf width: ______________________________________________ mm
Leaf weight _____________________________________________ kg
Leaf thickness: ___________________________________________ mm
Side panel:
Track mounting:
ceiling mounting
wall mounting
Track pelmetting: __________________________________________________
Additional accessories: damper and soft closing device:
KWS handles
Order Enquiry
Company ____________________________________________
Name ______________________________________________
Street ______________________________________________
Postcode/city _________________________________________
Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: ______________________________
Required information for glass sliding doors
Telephone ____________________________________________
Fax ______________________________________________
E-mail ______________________________________________
Contact person _____________________________
Other ________________________________________________________________________________
tempered safety glass
LSG
yes no
Hardware for Sliding Doors (Glass)Enquiry Form
Woelm GmbHHasselbecker Str. 2- 4D - 42579 HeiligenhausPhone: + 49 (0) 20 56 - 18 - 0Telefax: + 49 (0) 20 56 - 18 - [email protected]
Woelm Austria GmbHSeewalchen 5aA - 5201 SeekirchenPhone: + 43 (0) 62 12 - 25 02Telefax: + 43 (0) 62 12 - 69 [email protected]
The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission.
Part no. TEH_02G/02.2014This catalogue supersedes all previous catalogues.
TEK_0102 TEK_0308 TEK_0506
TEK_0407
TEH_01 TEH_02H TEH_02G
TEH_02D TEH_06 TEH_09
TEH_11 TEH_12 TEH_40
HELM Range
TEH_01 Hardware for Sliding Wardrobe Doors
TEH_02H Hardware for Sliding Doors (Timber)
TEH_02G Hardware for Sliding Doors (Glass)
TEH_02DDesign Hardware forSliding Doors (Timber and Glass)
TEH_06 Hardware for Sliding Gates
TEH_09 Hardware for Gateway Gates
TEH_11 Hardware for Curtains and Tarpaulins
TEH_12Safety Equipment against Falls from a Height (PSE)
TEH_40 Hardware for Sliding Shutters
KWS Range
TEK_0102 Door Holders and Door Stops
TEK_0308 Pull Handles, Door Handles and Accessories
TEK_0506 Flush Handles and Locks
TEK_0407Hardware for Handrails, Floor Rails,Coat Racks and Toilet Partition Walls