HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
Transcript of HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
1/266
Basics ofBasics of
Personal ComputerPersonal Computer
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
2/266
ComputerComputer
Computers are machines that perform tasks orComputers are machines that perform tasks or
calculations according to a set of instructions, orcalculations according to a set of instructions, or
programs. The first fully electronic computers, introducedprograms. The first fully electronic computers, introduced
in the 1940s, were huge machines that required teams ofin the 1940s, were huge machines that required teams ofpeople to operate.people to operate.
Compared to those early machines, today's computersCompared to those early machines, today's computers
are amaing. !ot only are they thousands of timesare amaing. !ot only are they thousands of timesfaster, they can fit on your desk, on your lap, or e"en infaster, they can fit on your desk, on your lap, or e"en in
your pocket.your pocket.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
3/266
What is a Computer?What is a Computer?
Computer is a electronic digital data processing de"iceComputer is a electronic digital data processing de"icewhich process the data at "ery high speed and alsowhich process the data at "ery high speed and also
stores the data for future use.stores the data for future use.
#lmost all other electronic de"ices handles single task#lmost all other electronic de"ices handles single task Computer is simply all in one electronic data processingComputer is simply all in one electronic data processing
de"icede"ice
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
4/266
PCHWPCHW
Classifications of ComputersClassifications of Computers
$uper Computer$uper Computer
%ainframe Computer%ainframe Computer
%ini Computer%ini Computer
%icro Computer%icro Computer
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
5/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
6/266
Earth SimulatorEarth Simulator
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
7/266
Top 5 Super ComputersTop 5 Super Computers
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
8/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
9/266
Indian SupercomputersIndian Supercomputers
Center for Development of Advanced Computin !C"DAC#Center for Development of Advanced Computin !C"DAC#
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
10/266
PCHWPCHW
Types of %icro ComputerTypes of %icro Computer
&esktop Computers&esktop Computers
aptop Computersaptop Computers
!ote(ook Computers!ote(ook Computers
)alm Computers)alm Computers
))
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
11/266
PCHWPCHW
Classifications of )C*sClassifications of )C*s
)C)C
)C + T)C + T
)C + #T)C + #T
)C - #T)C - #T
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
12/266
PCHWPCHW
)C ardware / $oftware)C ardware / $oftware
ardware - $tudy of physical parts /ardware - $tudy of physical parts /components of a computercomponents of a computer
$oftware - $oftware is collection of programs,$oftware - $oftware is collection of programs,instructions arranged in a sequential mannerinstructions arranged in a sequential manner
to carry out some specified tasks.to carry out some specified tasks.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
13/266
Hard$areHard$are
Computers work through an interaction of hardware andComputers work through an interaction of hardware and
software. ardware refers to the parts of a computer that yousoftware. ardware refers to the parts of a computer that youcan see and touch, including the case and e"erything insidecan see and touch, including the case and e"erything inside
it.it.
The most important piece of hardware is a tiny rectangularThe most important piece of hardware is a tiny rectangular
chip inside your computer called the central processing unitchip inside your computer called the central processing unitC)2, or microprocessor. 3t's the (rain of your computer5C)2, or microprocessor. 3t's the (rain of your computer5
the part that translates instructions and performsthe part that translates instructions and performs
calculations.calculations.
ardware items such as your monitor, key(oard, mouse,ardware items such as your monitor, key(oard, mouse,
printer, and other components are often called hardwareprinter, and other components are often called hardware
de"ices, or de"ices.de"ices, or de"ices.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
14/266
%anuaes &sed in Computers%anuaes &sed in Computers
%achine e"el anguages + %%achine e"el anguages + %
#ssem(ly anguage + #ssem(ler#ssem(ly anguage + #ssem(ler
igh e"el anguage + igh e"el anguage +
3nterpreter3nterpreter
ComplierComplier
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
15/266
'um(er s)stems used in Computer'um(er s)stems used in Computer
6inary !um(er $ystems6inary !um(er $ystems 7ctal !um(er $ystems7ctal !um(er $ystems
e8a - decimal !um(er $ystemse8a - decimal !um(er $ystems
6C& - 6inary Coded &ecimal6C& - 6inary Coded &ecimal
#$C33 + #merican $tandard Code for 3nformation#$C33 + #merican $tandard Code for 3nformation
3nterchange3nterchange
6C&3C + 8tended 6inary Coded &ecimal 3nterchange6C&3C + 8tended 6inary Coded &ecimal 3nterchange
CodeCode
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
16/266
Bit CalculationBit Calculation
1 is 1 (it1 is 1 (it
0 is 1 (it0 is 1 (it
4 (its : 1 ni((le4 (its : 1 ni((le
; (its : 1 (yte; (its : 1 (yte
10
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
17/266
Parts of a ComputerParts of a Computer
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
18/266
S)stem BoardS)stem Board
*+*+
,other Board,other Board
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
19/266
A motherboard is a multi-layered printed circuit board. Copper
circuit paths called tracks that resemble a complicated roadmapcarry signals and voltages across the motherboard.
A typical motherboard provides attachment points for one or
more of the following: CPU, graphics card, sound card, hard diskcontroller, memory !A"#, and e$ternal peripheral devices.
%t contains the chipset, which controls the operation of the CPU,
the PC%, %&A, A'P, and PC% ($press e$pansion slots, and usually#the %)(*A+A controller
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
20/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
21/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
22/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
23/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
24/266
What is a Port?What is a Port?
3n computer hardware, a 'port' ser"es as an interface3n computer hardware, a 'port' ser"es as an interface
(etween the computer and other computers or peripheral(etween the computer and other computers or peripheral
de"ices.de"ices.
)hysically, a port is a specialied outlet on a piece of)hysically, a port is a specialied outlet on a piece of
equipment to which a plug or ca(le connects.equipment to which a plug or ca(le connects.
lectronically, the se"eral conductors making up thelectronically, the se"eral conductors making up the
outlet pro"ide a signal transfer (etween de"ices.outlet pro"ide a signal transfer (etween de"ices.
The term 'port' is deri"ed from a latin word 'porta' gate,The term 'port' is deri"ed from a latin word 'porta' gate,
entrance, door2.entrance, door2.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
25/266
Soft$are PortSoft$are Port
## soft$are portsoft$are port usually =ust called a 'port'2 is ausually =ust called a 'port'2 is a
"irtual>logical data connection that can (e used (y"irtual>logical data connection that can (e used (y
programs to e8change data directly.programs to e8change data directly.
The most common of these are TC) and &) ports,The most common of these are TC) and &) ports,
which are used to e8change data (etween computers onwhich are used to e8change data (etween computers on
the 3nternet.the 3nternet.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
26/266
PortsPorts
$erial )ort$erial )ort
)arallel )ort)arallel )ort
?ame )ort?ame )ort
)$>< )ort)$>< )ort
$6 )ort$6 )ort
#udio )orts#udio )orts
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
27/266
I* ConnectorsI* Connectors
D T f
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
28/266
Data TransferData Transfer
$erial &ata Transfer$erial &ata Transfer
)arallel &ata Transfer)arallel &ata Transfer
3n telecommunication and computer science,3n telecommunication and computer science, serialserial
communicationcommunication is the process of sending data one (it atis the process of sending data one (it at
a time, sequentially, o"er a communication channel ora time, sequentially, o"er a communication channel or
computer (us. This is in contrast to parallelcomputer (us. This is in contrast to parallelcommunication, where se"eral (its are sent together, on acommunication, where se"eral (its are sent together, on a
link with se"eral parallel channels.link with se"eral parallel channels.
$erial computer (uses are (ecoming more common e"en$erial computer (uses are (ecoming more common e"enat shorter distances, as impro"ed signal integrity andat shorter distances, as impro"ed signal integrity and
transmission speeds in newer serial technologies ha"etransmission speeds in newer serial technologies ha"e
(egun to outweigh the parallel (us's.(egun to outweigh the parallel (us's.
&SB
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
29/266
&SB&SB
ni"ersal $erial 6usni"ersal $erial 6us
&SB&SB &niversal Serial Bus&niversal Serial Bus2 is a specification to2 is a specification to
esta(lish communication (etween de"ices and a hostesta(lish communication (etween de"ices and a host
controller usually personal computers2, de"eloped andcontroller usually personal computers2, de"eloped and
in"ented 3ntel. $6 is intended to replace many "arietiesin"ented 3ntel. $6 is intended to replace many "arieties
of serial and parallel ports.of serial and parallel ports.
$6 can connect computer peripherals such as mice,$6 can connect computer peripherals such as mice,
key(oards, digital cameras, printers, personal mediakey(oards, digital cameras, printers, personal media
players, flash dri"es, and e8ternal hard dri"es. @or manyplayers, flash dri"es, and e8ternal hard dri"es. @or many
of those de"ices, $6 has (ecome the standardof those de"ices, $6 has (ecome the standard
connection method.connection method.
&SB&SB
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
30/266
&SB&SB
$6 "ersion 1.0 : 1< %(ps$6 "ersion 1.0 : 1< %(ps
$6 "ersion
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
31/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
32/266
USB CableUSB Cable
U& Universal &erial us# is a new technology intendedU& Universal &erial us# is a new technology intendedto replace the current dedicated ports used forto replace the current dedicated ports used forkeyboards and mice.keyboards and mice.
+he U& interface is specifically designed to allow easy+he U& interface is specifically designed to allow easyconnection of a wide variety of devices it is intendedconnection of a wide variety of devices it is intended
to be user-friendly and truly plug and play.to be user-friendly and truly plug and play. /n a system e0uipped with U&, one can hot swap/n a system e0uipped with U&, one can hot swapdevices, meaning they can be plugged into the systemdevices, meaning they can be plugged into the systemor removed without needing to power the system downor removed without needing to power the system downor doing anything to it before the change is made.or doing anything to it before the change is made.
-i Wi ./01-i Wi ./01
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
33/266
-ire Wire ./01-ire Wire ./01
The 3 1B94 interface is a serial (us interfaceThe 3 1B94 interface is a serial (us interface
standard for high-speed communications and real-timestandard for high-speed communications and real-time
data transfer, frequently used (y personal computers, asdata transfer, frequently used (y personal computers, aswell as in digital audio, digital "ideo, automoti"e, andwell as in digital audio, digital "ideo, automoti"e, and
aeronautics applications.aeronautics applications.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
34/266
2e) -eatures2e) -eatures
@ire ire can connect up to DB peripheral de"ices using@ire ire can connect up to DB peripheral de"ices using
tree chain topology.tree chain topology.
$upports plug and play.$upports plug and play.
ot swapping supported i.e. no need to switch off theot swapping supported i.e. no need to switch off the
system to connect>disconnect de"ices.system to connect>disconnect de"ices.
Ca(les can (e 4.E meters long and fle8i(le than otherCa(les can (e 4.E meters long and fle8i(le than other
parallel ca(les.parallel ca(les.
IEEE ./01 St d dIEEE ./01 St d d
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
35/266
IEEE ./01 StandardsIEEE ./01 Standards
@ireire 400 3 1B94-199E2@ireire 400 3 1B94-199E2
@ireire ;00 3 1B94(-
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
36/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
37/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
38/266
E3pansion SlotsE3pansion Slots
ISAISA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
39/266
ISAISA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
40/266
ISA " Industr) Standard ArchitectureISA " Industr) Standard Architecture
$tands for 3ndustry $tandard #rchitecture. 3$# is a type$tands for 3ndustry $tandard #rchitecture. 3$# is a typeof (us used in )Cs for adding e8pansion cards. @orof (us used in )Cs for adding e8pansion cards. @or
e8ample, an 3$# slot may (e used to add a "ideo card, ae8ample, an 3$# slot may (e used to add a "ideo card, a
network card, or an e8tra serial port.network card, or an e8tra serial port.
The original ;-(it "ersion of )C3 uses a D< pinThe original ;-(it "ersion of )C3 uses a D< pin
connection and supports clock speeds of ; and BB %.connection and supports clock speeds of ; and BB %.
1D-(it )C3 uses 9; pins and supports the same clock1D-(it )C3 uses 9; pins and supports the same clock
speeds.speeds.
ISA SlotsISA Slots
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
41/266
ISA SlotsISA Slots
T)pes of E3pansion SlotsT)pes of E3pansion Slots
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
42/266
T)pes of E3pansion SlotsT)pes of E3pansion Slots
AGPSlAGPSlt
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
43/266
AGP SlotAGP Slot Accelerated 'raphicsAccelerated 'raphics
PortPort is an interfaceis an interfacespecification that enablesspecification that enables1) graphics to display1) graphics to display
0uickly on ordinary0uickly on ordinarypersonal computers.personal computers.
A'P is designed toA'P is designed toconvey 1-) images forconvey 1-) images fore$ample, from 2eb sitese$ample, from 2eb sitesor C)-!/"s# much moreor C)-!/"s# much more0uickly and smoothly than0uickly and smoothly thanis possible today on anyis possible today on any
system other than asystem other than acostly graphicscostly graphicsworkstation.workstation.
A4P CA+DA4P CA+D
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
44/266
A4P CA+DA4P CA+D
PCISltPCISlots
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
45/266
PCI SlotsPCI Slots
PC% Peripheral Component %nterconnect# is an inter connection systemPC% Peripheral Component %nterconnect# is an inter connection system
between a microprocessor and attached devices in which e$pansion slots arebetween a microprocessor and attached devices in which e$pansion slots are
spaced closely for high speed operation. PC% transmits 13 bits at a time in aspaced closely for high speed operation. PC% transmits 13 bits at a time in a
435-pin connection the e$tra pins are for power supply and grounding# and435-pin connection the e$tra pins are for power supply and grounding# and
65 bits in a 477-pin connection in an e$panded implementation65 bits in a 477-pin connection in an e$panded implementation
PCI 1 (it e3pansion slotsPCI"1 (it e3pansion slots
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
46/266
PCI"1 (it e3pansion slotsPCI"1 (it e3pansion slots
PCI cardPCI card
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
47/266
PCI cardPCI card
PCI"1 (it cardPCI"1 (it card
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
48/266
PCI"1 (it cardPCI"1 (it card
PCI E l tPCI E press slot
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
49/266
PCI"E3press slotPCI"E3press slot
PCI"e %anesPCI"e %anes
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
50/266
PCI"e %anesPCI"e %anes
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
51/266
PCI"e 4raphics CardPCI"e 4raphics Card
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
52/266
PCI"e 4raphics CardPCI"e 4raphics Card
PCI " E3pressPCI " E3press
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
53/266
PCI " E3pressPCI E3press
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
54/266
MemoryMemory
Computer memor)Computer memor) refers to units or de"ices that arerefers to units or de"ices that are
used to store data or programs sequences ofused to store data or programs sequences of
instructions2 on a temporary or permanent (asis for useinstructions2 on a temporary or permanent (asis for use
in an electronic digital computer.in an electronic digital computer.
#lthough memory is technically any form of electronic#lthough memory is technically any form of electronic
storage, it is used most often to identify fast, temporarystorage, it is used most often to identify fast, temporary
forms of storage.forms of storage.
,emor) Hierarch),emor) Hierarch)
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
55/266
,emor) Hierarch),emor) Hierarch)
,emor) ,anaement,emor) ,anaement
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
56/266
,emor) ,anaement,emor) ,anaement
+A, 6 +*,+A, 6 +*,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
57/266
+A, 6 +*,+A, 6 +*,
!A" random access!A" random access
memory# chips hold thememory# chips hold theprogram and data that theprogram and data that theCPU is presentlyCPU is presentlyprocessing.processing.!A" is called temporary!A" is called temporary
because as soon as thebecause as soon as thecomputer is turned off,computer is turned off,everything in !A" is lost.everything in !A" is lost.!A" storage is!A" storage isfre0uently e$pressed infre0uently e$pressed inmegabytes. +hus, amegabytes. +hus, acomputer with 65" !A"computer with 65" !A"has memory that holdhas memory that holdabout 65 millionabout 65 millioncharacters of data andcharacters of data andprograms.programs.
!/" read only memory# chipshave programs built into themat the factory. Unlike !A"chips, the contents of !/"chips cannot be changed user.
!/" chips typically containspecial instructions fordetailed computer operations.
8or e$ample, !/" instructionsmay start
the computer, give keyboardkeys their special controlcapabilities, and putcharacters on the screen.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
58/266
+EAD *'%7 ,E,*+7 !+*,#+EAD *'%7 ,E,*+7 !+*,#
F7%F7%
)F7%)F7%
)F7%)F7%
)F7%)F7%
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
59/266
+andom Access ,emor) !+A,#+andom Access ,emor) !+A,#
$F#%$F#% &F#%&F#%
@)%@)% &7 F#%&7 F#%
$&F#%$&F#% &&F$&F#%&&F$&F#%
&&F
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
60/266
ED* +A,ED* +A,
&7 &F#%, sometimes referred to as yper )age&7 &F#%, sometimes referred to as yper )age
%ode ena(led &F#%, is similar to @ast )age %ode%ode ena(led &F#%, is similar to @ast )age %ode
&F#% with the additional feature that a new access&F#% with the additional feature that a new access
cycle can (e started while keeping the data output of thecycle can (e started while keeping the data output of the
pre"ious cycle acti"e.pre"ious cycle acti"e.
This allows a certain amount of o"erlap in operationThis allows a certain amount of o"erlap in operation
pipelining2, allowing somewhat impro"ed performance.pipelining2, allowing somewhat impro"ed performance.
3t was EG faster than @ast )age %ode &F#%.3t was EG faster than @ast )age %ode &F#%.
ED* +A,ED* +A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
61/266
ED* +A,ED* +A,
/8 Pins ED* +A,/8 Pins ED* +A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
62/266
/8 Pins ED* +A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
63/266
9: Pins ED* +A,9: Pins ED* +A,
128MB100MhzSDRAMDIMM128MB100MhzSDRAMDIMM
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
64/266
128MB 100Mhz SDRAM DIMM128MB 100Mhz SDRAM DIMM
Pictured here is the 437 megabyte "# 499 megahert ";# &)!A"Pictured here is the 437 megabyte "# 499 megahert ";# &)!A"un-buffered )%"". +his product is available for both 2orkstationsun-buffered )%"". +his product is available for both 2orkstations
and &ervers.and &ervers.
A )%"" dual in-line memory module# is a double &%"".
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
65/266
5000584 MEM DDR 512MB PC266B 32X8 R05000584 MEM DDR 512MB PC266B 32X8 R0
+he >43-megabyte "# )ouble )ata !ate-&ynchronous )!A"+he >43-megabyte "# )ouble )ata !ate-&ynchronous )!A"))!-&)!A"# module supports data transfers on both edges of))!-&)!A"# module supports data transfers on both edges ofeach clock cycle, effectively doubling the memory chip=s dataeach clock cycle, effectively doubling the memory chip=s datathroughput. ))!-&)!A" is also called &)!A" %%. ))!throughput. ))!-&)!A" is also called &)!A" %%. ))!
&)!A" double data rate &)!A"# is synchronous dynamic !A"&)!A" double data rate &)!A"# is synchronous dynamic !A"&)!A"# that can theoretically improve memoryclock speed to&)!A"# that can theoretically improve memoryclock speed toat least 399 ";?. %t activates output on both the rising andat least 399 ";?. %t activates output on both the rising andfalling edge of the system clock rather than on @ust the risingfalling edge of the system clock rather than on @ust the risingedge, potentially doubling output.edge, potentially doubling output.
DD+:SD+A,DD+:SD+A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
66/266
&&F< $&F#% is a dou(le data rate synchronous&&F< $&F#% is a dou(le data rate synchronous
dynamic random access memory interface. 3n addition todynamic random access memory interface. 3n addition to
dou(le pumping the data (us as in &&F $&F#%dou(le pumping the data (us as in &&F $&F#%
transferring data on the rising and falling edges of thetransferring data on the rising and falling edges of the
(us clock signal2, &&F< allows higher (us speed and(us clock signal2, &&F< allows higher (us speed and
requires lower power.requires lower power.
The two factors com(ine to require a total of 4 dataThe two factors com(ine to require a total of 4 data
transfers per internal clock cycle.transfers per internal clock cycle.
DD+:"SD+A,DD+:"SD+A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
67/266
3n addition &&F
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
68/266
DD+SD+A, 6 DD+:SD+A,DD+SD+A, 6 DD+:SD+A,
DD+/SD+A,DD+/SD+A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
69/266
DD+/SD+A,DD+/SD+A,
&&FB $&F#% is an impro"ement o"er its predecessor,&&FB $&F#% is an impro"ement o"er its predecessor,&&F< $&F#%, and the&&F< $&F#%, and the two are not compati(letwo are not compati(le. The. The
primary (enefit of &&FB is the a(ility to transfer at twiceprimary (enefit of &&FB is the a(ility to transfer at twice
the data rate of &&Fs.
DD+: 6 DD+/ +A,DD+: 6 DD+/ +A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
70/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
71/266
DD+:"SD+A,DD+:"SD+A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
72/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
73/266
+A,+A,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
74/266
+A,+A,
$3%% B0-pin - &7 F#%2$3%% B0-pin - &7 F#%2
$3%% A
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
75/266
,emor) ,odules,emor) ,odules
$&F#% -$&F#% - HB.B" + 1D; pinsHB.B" + 1D; pins
&&F$&F#% -&&F$&F#% - H
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
76/266
A )%"" dual in-line memory module# is a double &%"" single in-A )%"" dual in-line memory module# is a double &%"" single in-line memory module#.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
77/266
DD+: 6 DD+/ SD+A, DI,, S%*TSDD+: 6 DD+/ SD+A, DI,, S%*TS
FloppyConnectionFlo
ppyConnection
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
78/266
Floppy ConnectionFloppy Connection
+his is where the floppy disk drive cable connects to+his is where the floppy disk drive cable connects tothe motherboard. Pin 4 orientation is indicated inthe motherboard. Pin 4 orientation is indicated inthe graphic. +he slot is keyed and only accepts athe graphic. +he slot is keyed and only accepts akeyed cable in the proper orientationkeyed cable in the proper orientation
Panasonic 1.44MB Floppy Disk DrivePanasonic 1.44MB Flo
ppy Disk Drive
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
79/266
+he ma@or parts of a 8)) include:+he ma@or parts of a 8)) include:
!ead*2rite ;eads:
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
80/266
The cable end that has a split and twist in it connects to the floppydisk drive. The bottom pin connector gets attached to the
motherboard's floppy disk controller.The ribbon cable contains a red dotted edge which aligns with pinone. It can be identified by the silk-screened markings on themotherboard and it is normally the end closest the rear edge of thesystem board.
Hard Dis; DriveHard Dis; Drive
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
81/266
HDDHDD
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
82/266
SecondaryIDEConnectorSecondaryIDEConnector
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
83/266
Secondary IDE ConnectorSecondary IDE Connector
+his connector is used for all %)( devices, most+his connector is used for all %)( devices, most
commonly A+A or UA+A66*499 hard disks or C)*)B)commonly A+A or UA+A66*499 hard disks or C)*)B)
drives.drives.
IDE ca(leIDE ca(le
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
84/266
Sti th D tSt i
th D t ) i d h f f) t i t d th f f
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
85/266
Storing the DataStoring the Data )ata is stored on the surface of a)ata is stored on the surface of aplatter in sectors and tracks. +racksplatter in sectors and tracks. +racksare concentric circles, and &ectors areare concentric circles, and &ectors arepie-shaped wedges on a tracks.pie-shaped wedges on a tracks.
A typical +rack is shown in yellow aA typical +rack is shown in yellow a&ector is shown in blue. A sector&ector is shown in blue. A sectorcontains a fi$ed number of bytescontains a fi$ed number of bytes >43>43bytes. &ectors are not read individuallybytes. &ectors are not read individuallyon most PCs they are groupedon most PCs they are groupedtogether into continuous chunks calledtogether into continuous chunks calledclusters.clusters.
A typical @ob, such as loading a fileA typical @ob, such as loading a fileinto a spreadsheet program, can involveinto a spreadsheet program, can involvethousands or even millions of individualthousands or even millions of individualdisk accessesdisk accesses
+he process of low-level formatting a+he process of low-level formatting adrive establishes the tracks anddrive establishes the tracks andsectors on the platter. +he startingsectors on the platter. +he startingand ending points of each sector areand ending points of each sector arewritten onto the platter.written onto the platter.
+his process prepares the drive to hold+his process prepares the drive to holdblocks of bytes. ;igh-level formattingblocks of bytes. ;igh-level formattingthen writes the file-storagethen writes the file-storagestructures, like the file-allocationstructures, like the file-allocationtable, into the sectors. +his processtable, into the sectors. +his processprepares the drive to hold filesprepares the drive to hold files
Track
Sector
HDDHDD
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
86/266
&ata Fecording Technique + rite )re Compensation&ata Fecording Technique + rite )re Compensation
#ccess Time#ccess Time
atency Timeatency Time
anding Ioneanding Ione
SATASATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
87/266
TheThe serial ATAserial ATA oror SATASATA computer (us, is a storage-computer (us, is a storage-
interface for connecting host (us adapters to massinterface for connecting host (us adapters to mass
storage de"ices such as hard disk dri"es and opticalstorage de"ices such as hard disk dri"es and optical
dri"es. The $#T# host adapter is integrated into almostdri"es. The $#T# host adapter is integrated into almost
all modern consumer laptop computers and desktopall modern consumer laptop computers and desktop
mother(oards.mother(oards.
$#T# offers se"eral compelling ad"antages o"er the$#T# offers se"eral compelling ad"antages o"er the
older parallel #T# )#T#2 interfaceJ reduced ca(le-(ulkolder parallel #T# )#T#2 interfaceJ reduced ca(le-(ulk
and cost reduced from ;0 wires to se"en2, faster andand cost reduced from ;0 wires to se"en2, faster and
more efficient data transfer, and hot swapping.more efficient data transfer, and hot swapping.
SATASATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
88/266
$erial #T# was designed to replace the older #T# #T$erial #T# was designed to replace the older #T# #T
#ttachment2 standard also known as 3&2. 3t is a(le to#ttachment2 standard also known as 3&2. 3t is a(le to
use the same low le"el commands, (ut serial #T# host-use the same low le"el commands, (ut serial #T# host-
adapters and de"ices communicate "ia a high-speedadapters and de"ices communicate "ia a high-speed
serial ca(le o"er two pairs of conductors.serial ca(le o"er two pairs of conductors.
SATASATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
89/266
PATA < SATAPATA < SATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
90/266
SATASATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
91/266
SATA +evision .=8 !SATA .=54(s.1.E ?(it>s, communicate at a rate of 1.E ?(it>s.
SATA +evision :=8 !SATA /4(s.throughput from 1E0 %6>s to B00 %6>s.
SATA +evision /=8 !SATA 4(s to D00%6>s or D?(ps.
SASSAS
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
92/266
Serial Attached SCSISerial Attached SCSI SASSAS2 is a computer (us, which2 is a computer (us, which
mo"es data to and from computer storage de"ices suchmo"es data to and from computer storage de"ices such
as hard dri"es and tape dri"es. $#$ depends on a point-as hard dri"es and tape dri"es. $#$ depends on a point-
to-point serial protocol that replaces the parallel $C$3to-point serial protocol that replaces the parallel $C$3
(us technology that first appeared.(us technology that first appeared.
$#$ offers (ackwards-compati(ility with second-$#$ offers (ackwards-compati(ility with second-
generation $#T# dri"es. $#T# B ?(it>s dri"es may (egeneration $#T# dri"es. $#T# B ?(it>s dri"es may (e
connected to $#$ (ackplanes, (ut $#$ dri"es may notconnected to $#$ (ackplanes, (ut $#$ dri"es may not(e connected to $#T# (ackplanes.(e connected to $#T# (ackplanes.
SASSAS
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
93/266
$#$ stands for $erial #ttached $C$3. 6asically, a $#$$#$ stands for $erial #ttached $C$3. 6asically, a $#$
dri"e utilies the same form factor as a $#T# dri"e (utdri"e utilies the same form factor as a $#T# dri"e (ut
has se"eral high performance ad"antages. @irst of all,has se"eral high performance ad"antages. @irst of all,
there's the platter speed. hile typical $#T# dri"esthere's the platter speed. hile typical $#T# dri"esoperate at A
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
94/266
SAS 6 SATASAS 6 SATA
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
95/266
SAS HDD ConnectorSAS HDD Connector
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
96/266
SCSI " HDDSCSI " HDD
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
97/266
SCSI " HDDSCSI " HDD
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
98/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
99/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
100/266
+AID *vervie$+AID *vervie$
,anain lare sets of Data,anain lare sets of Data
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
101/266
)re"ent failed disks from making data una"aila(le.)re"ent failed disks from making data una"aila(le.
%ore efficiently (alance the 3>7 load across disks.%ore efficiently (alance the 3>7 load across disks.
#llow file systems to grow while they are in use.#llow file systems to grow while they are in use.
#llow dual-host fail-o"er configurations with redundant#llow dual-host fail-o"er configurations with redundant
disks.disks.
f
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
102/266
Techni>ues for ,anain DataTechni>ues for ,anain Data
ot $paresot $pares
&isk $triping&isk $triping F#3& EF#3& E
&isk %irroring&isk %irroring
Common +AID implementationsCommon +AID implementations
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
103/266
F#3& 0JF#3& 0J $triping$triping
F#3& 1JF#3& 1J %irroring%irroring
F#3& EJF#3& EJ $triping with distri(uted parity$triping with distri(uted parity
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
104/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
105/266
%ultiple physical disks are com(ined into a single "irtual%ultiple physical disks are com(ined into a single "irtual
diskdisk
The address space is contiguousThe address space is contiguous
There is no data redundancy less relia(le2There is no data redundancy less relia(le2
oss of one num(er equates to loss of all dataoss of one num(er equates to loss of all data %in < disks to %a8 B< &isks%in < disks to %a8 B< &isks
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
106/266
#llows to grow "irtual disk (y concatenating additional#llows to grow "irtual disk (y concatenating additional
physical disk to itphysical disk to it 100G disk capacity is a"aila(le100G disk capacity is a"aila(le
6est Fead > rite )erformance %ore Controllers26est Fead > rite )erformance %ore Controllers2
!o redundancy!o redundancy
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
107/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
108/266
@ull redundant copy of data is a"aila(le on one or more@ull redundant copy of data is a"aila(le on one or moredisksdisks
$lower write performance$lower write performance
6oth dri"es can (e used for reads to impro"e performance6oth dri"es can (e used for reads to impro"e performance
E0G disk capacity is only a"aila(leE0G disk capacity is only a"aila(le
+AID .+AID .
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
109/266
3n case of failure, applications can continue to use the3n case of failure, applications can continue to use the
remaining half of the mirrorremaining half of the mirror
Feco"ering from a disk failure + duplicating the contentsFeco"ering from a disk failure + duplicating the contentsof the failed disk*s mirror into a new dri"eof the failed disk*s mirror into a new dri"e
This is the only method which supports 7$ redundancy.This is the only method which supports 7$ redundancy.
Stripin $ith Distri(uted Parit) +AID 5Stripin $ith Distri(uted Parit) +AID 5
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
110/266
p )p )
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
111/266
+AID 5+AID 5
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
112/266
6oth parity and data are striped across a group of disks6oth parity and data are striped across a group of disks
@ailure rates are lower than dedicated parity@ailure rates are lower than dedicated parity
7nly one disk failure will (e supported7nly one disk failure will (e supported
+AID +AID
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
113/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
114/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
115/266
F#3& D &istri(uted &ual )arityF#3& D &istri(uted &ual )arity
8tension of F#3& E8tension of F#3& E
)ro"iding additional fault tolerance)ro"iding additional fault tolerance
Fead performance same as F#3& EFead performance same as F#3& E
6ut write performance slow due to dual parity6ut write performance slow due to dual parity
&isk usage less compared to F#3& E&isk usage less compared to F#3& E
Two disk failures are supportedTwo disk failures are supported
Bac;up and +estoreBac;up and +estore
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
116/266
+easons to ta;e Bac;up+easons to ta;e Bac;up
ne8pected ard &isk @ailuresne8pected ard &isk @ailures
@ailures of $upport ardware@ailures of $upport ardware
)hysical &amage)hysical &amage
$oftware )ro(lems$oftware )ro(lems KirusesKiruses
uman rroruman rror
Festore - hene"er there is an une8pected completeFestore - hene"er there is an une8pected complete
failure of a system, the (acked up data to (e restored tofailure of a system, the (acked up data to (e restored to
the specific system within a short period of time, tothe specific system within a short period of time, to
continue the (usinesscontinue the (usiness
Hih Availa(ilit) 6 -ault ToleranceHih Availa(ilit) 6 -ault Tolerance
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
117/266
Hih Availa(ilit)Hih Availa(ilit)
Can pro"ide access to data most of the time whileCan pro"ide access to data most of the time whilemaintaining the integrity of that data.maintaining the integrity of that data.
3n case of failure within few minutes the data will (e3n case of failure within few minutes the data will (e
a"aila(le.a"aila(le.
-ault Tolerance-ault Tolerance )ro"ide data integrity and continuous data a"aila(ility.)ro"ide data integrity and continuous data a"aila(ility.
&ata is a"aila(le e"en in case of failure.&ata is a"aila(le e"en in case of failure.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
118/266
Sound CardsSound Cards
'2 &ound Card w* "edia Bision Chipset'2 &ound Card w* "edia Bision Chi
pset
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
119/266
A sound card also referred to as an audio card# is aA sound card also referred to as an audio card# is aperipheral device that attaches to the %&A or PC% &lot onperipheral device that attaches to the %&A or PC% &lot ona motherboard to enable the computer to input, process,a motherboard to enable the computer to input, process,
and deliver sound. +he sound card=sand deliver sound. +he sound card=s four main functionsfour main functionsare: as aare: as a synthesiersynthesiergenerating sounds#, as agenerating sounds#, as a "%)%"%)%interface,interface, analog to digital conversionanalog to digital conversionused,used,
for (.g., in recording sound from a microphone#, andfor (.g., in recording sound from a microphone#, and digitaldigitalto analog conversionto analog conversionused, for (.g., to reproduce soundused, for (.g., to reproduce soundfor a speaker#.for a speaker#...
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
120/266
Video CardsVideo Cards
A'P 'raphics AcceleratorA'P 'ra
phics Accelerator
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
121/266
A'P offers high-speed data transfer to and fromA'P offers high-speed data transfer to and from!A", optimiing the use of memory and minimiing!A", optimiing the use of memory and minimiingthe amount of memory necessary for high-the amount of memory necessary for high-
performance graphics.performance graphics. +he A'P main memory use is dynamic, meaning that+he A'P main memory use is dynamic, meaning that
when not being used for accelerated graphics, mainwhen not being used for accelerated graphics, mainmemory is restored for use by the /perating &ystemmemory is restored for use by the /perating &ystemor by other applications.or by other applications.
Modem
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
122/266
ModemWhat is a ,odem ?
,odem ta;es diital information from computer and
converts it to an analo sinal@ $hich is then
transmitted throuh a phone line=
There are four (asic t)pes of modemsM E3ternalM &SBM InternalM Built"in
The e3ternal and &SB set on )our des; outside the
PC $hile internal and (uilt"in are inside the PC
Modemstands for
,*d l t
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
123/266
,*dulator
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
124/266
+his is the cable that ships with the modems for+his is the cable that ships with the modems for
connection to a telephone @ack. +he green codedconnection to a telephone @ack. +he green codedend fits in the modem
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
125/266
$hort for$hort for 'et$or; Interface Card'et$or; Interface Card, a, a 'IC'IC is alsois also
commonly referred to as acommonly referred to as a net$or; adapternet$or; adapter and is anand is an
e8pansion card or an integrated card that ena(les ae8pansion card or an integrated card that ena(les a
computer to connect to a network such as a homecomputer to connect to a network such as a homenetwork and>or the 3nternet using a thernet ca(le with anetwork and>or the 3nternet using a thernet ca(le with a
FN-4E connector.FN-4E connector.
'IC'IC
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
126/266
Wi"-i
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
127/266
'IC'IC
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
128/266
UTP/STP Network CablesUTP/STP Network Cables
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
129/266
+he Unshielded +wisted Pair U+P# network+he Unshielded +wisted Pair U+P# network
cable is used to save money on a hub whencable is used to save money on a hub whenconnecting two computers together withconnecting two computers together with
twisted pair. +he !5> cable is crossedtwisted pair. +he !5> cable is crossed
over, meaning that when attached to theover, meaning that when attached to the
machines, the !5> connector is crimpedmachines, the !5> connector is crimpedopposite of the other connector. twoopposite of the other connector. two
computers may connect to one another bycomputers may connect to one another by
the use of an !-5> Crossover cable.the use of an !-5> Crossover cable.
Remote keyboard and mouse kitRemote k
eyboard and mouse kit
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
130/266
The Destination II input kit consists of a remotekeyboard, a remote mouse, a remote receiver, and the driverCD.. The remote receiver is used to transfer the radio frequency
signal from the keyboard and mouse to the computer. n thegraphic, click the hyperlinks for more information. Thereceiver must be placed at least ! inches or "# centimetersfrom any electromechanical device, including the computer,the computer monitor, and e$ternal storage drives.
Cd - Rom DrivesCd - Rom Drives
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
131/266
M#com&ata#com&ata
MpsonpsonMitachiitachiM&$&$M??Mite7nite7nM%itsumi%itsumi
M!C!CM)anasonic)anasonicM)hilips)hilipsM)le8tor)le8torM$anyo$anyoM$ony$onyMTeacTeacMToshi(aToshi(aMearnesearnes
These are the
different vendors
whose CD-Drivesare given by
Gateway along with
its systems..
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
132/266
Cd-drives are only IDE devies!
CD- rom drives an only read data from the CDs"
data annot be written onto the CDs!
If a Blan# Cd$Cd-R%&Blan# 'edia( is )laed in a
CD-rom" it will not reogni*e the CD$ Cd-rw!
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
133/266
DDDD
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
134/266
hat is &K&Ohat is &K&O
&K& stands for P&igital Kersatile &iskQ or P&igital&K& stands for P&igital Kersatile &iskQ or P&igital
Kideo &iskQKideo &iskQ
&K& was first created =ust to (e a (igger C&&K& was first created =ust to (e a (igger C&
capa(le of holding more infocapa(le of holding more info
# &K& disk can hold (etween 4.4 and 1Dg( of# &K& disk can hold (etween 4.4 and 1Dg( of
data, depending on the diskdata, depending on the disk
&K& disks read information off of < layers using a&K& disks read information off of < layers using a(lue laser.(lue laser.
,onitor,onitor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
135/266
## monitormonitor oror displa)displa) sometimes called asometimes called a visualvisual
displa) unitdispla) unit2 is an electronic "isual display for2 is an electronic "isual display for
computers. The monitor comprises the display de"ice,computers. The monitor comprises the display de"ice,
circuitry, and an enclosure.circuitry, and an enclosure.
The display de"ice in modern monitors is typically a thinThe display de"ice in modern monitors is typically a thin
film transistor liquid crystal display T@T-C&2, whilefilm transistor liquid crystal display T@T-C&2, while
older monitors use a cathode ray tu(e CFT2.older monitors use a cathode ray tu(e CFT2.
,onitors,onitors
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
136/266
4A Ca(le < Connector4A Ca(le < Connector
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
137/266
DIDI
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
138/266
TheThe Diital isual InterfaceDiital isual Interface DIDI2 is a "ideo interface2 is a "ideo interface
standard designed to pro"ide "ery high "isual quality onstandard designed to pro"ide "ery high "isual quality on
digital display de"ices such as flat panel C& computerdigital display de"ices such as flat panel C& computer
displays and digital pro=ectors.displays and digital pro=ectors.
&K3 Connection &K3 keeps data in digital form from the&K3 Connection &K3 keeps data in digital form from the
computer to the monitor. There's no need to con"ertcomputer to the monitor. There's no need to con"ert
data from digital information to analog information. C&data from digital information to analog information. C&
monitors work in a digital mode and support the &K3monitors work in a digital mode and support the &K3
format.format.
,onitor,onitor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
139/266
DI"DDI"Ddigital only2digital only2
DI"ADI"Aanalog only2analog only2
DI"IDI"Iintegrated, digital / analog2integrated, digital / analog2
,."DA,."DAintegrated, digital, analog / $62integrated, digital, analog / $62
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
140/266
S"ideoS"ideo
Separate ideoSeparate ideo, more commonly known as, more commonly known as S"ideoS"ideo,,
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
141/266
Separate ideop , more commonly known as, y S ideo,,
also calledalso called7
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
142/266
3n computing, a3n computing, a printerprinteris a peripheral which produces ais a peripheral which produces a
hard copy permanent reada(le te8t and>or graphics2 ofhard copy permanent reada(le te8t and>or graphics2 of
documents stored in electronic form, usually on physicaldocuments stored in electronic form, usually on physical
print media such as papers.print media such as papers.
%any printers are primarily used as local peripherals,%any printers are primarily used as local peripherals,
and are attached (y a printer ca(le or, in most newerand are attached (y a printer ca(le or, in most newer
printers, a $6 ca(le to a computer which ser"es as aprinters, a $6 ca(le to a computer which ser"es as adocument source.document source.
PrinterPrinter
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
143/266
3mpact )rinters + &aisy wheel, &rum )rinter, ine )rinter3mpact )rinters + &aisy wheel, &rum )rinter, ine )rinter
and &ot-%atri8 )rinterand &ot-%atri8 )rinter
!on-3mpact )rinters + 3nk=et, 6u((le =et and aser!on-3mpact )rinters + 3nk=et, 6u((le =et and aser
)rinters)rinters
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
144/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
145/266
%aser Printer%aser Printer
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
146/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
147/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
148/266
Printer Ca(lesPrinter Ca(les
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
149/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
150/266
%/&%/&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
151/266
+he %/& is special software that interfaces the+he %/& is special software that interfaces thema@or hardware components of your computer with thema@or hardware components of your computer with the/perating system, %t is usually stored on a 8lash/perating system, %t is usually stored on a 8lash"emory chip on the motherboard, but sometimes the"emory chip on the motherboard, but sometimes the
chip is another type of !/"chip is another type of !/"
%/&%/&
When you turn on your computer, the BIOSWhen you turn on your computer, the BIOS
)uring this boot se0uence, the %/&)uring this boot se0uence, the %/&does a remarkable amount of work todoes a remarkable amount of work to
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
152/266
e youtu o youco pute,te OSy y p ,
does several things. This is its usualdoes several things. This is its usual
sequence:sequence:
1.1. Check the CMOS Setup for custom settingsCheck the CMOS Setup for custom settings
2.2. Load the interrupt handlers and deviceLoad the interrupt handlers and device
driversdrivers
3.3. Initialize registers and power managementInitialize registers and power management
4.4. Perform the power-on self-test (POST)Perform the power-on self-test (POST)
5.5. Display system settingsDisplay system settings
6.6. Determine which devices are bootableDetermine which devices are bootable
7.7. Initiate the bootstrap sequenceInitiate the bootstrap sequence
Booting the ComputerBooting the Computer
Whenever the Computer is turned onWhenever the Computer is turned on
computer, the first thing you see is thecomputer, the first thing you see is theBIOS software doing its thing. BIOSBIOS software doing its thing. BIOS
displays text describing things like thedisplays text describing things like the
amount of memory installed, the type ofamount of memory installed, the type of
hard disk and so on.hard disk and so on.
does a remarkable amount of work tom m fget the computer ready to run. Afterget the computer ready to run. Afterchecking the C"/& &etup and loadingchecking the C"/& &etup and loading
the interrupt handlers, the %/&the interrupt handlers, the %/&determines whether the Bideo card isdetermines whether the Bideo card isoperational.operational.
De$t, the %/& checks to see if thisDe$t, the %/& checks to see if thisis a cold boot or a reboot. %t doesis a cold boot or a reboot. %t doesthis by checking the value at memorythis by checking the value at memoryaddress 9999:953. A value of 4315haddress 9999:953. A value of 4315hindicates a reboot, and the %/&indicates a reboot, and the %/&
skips the rest of P/&+.skips the rest of P/&+. %f it is a cold boot, the %/& verifies%f it is a cold boot, the %/& verifies!A" by performing a read*write test!A" by performing a read*write testof each memory address. %t checksof each memory address. %t checksthe P&*3 ports or U& ports for athe P&*3 ports or U& ports for akeyboard and a mouse. %t looks forkeyboard and a mouse. %t looks forPC% bus and, if it finds one, checks allPC% bus and, if it finds one, checks allthe PC% cards. %f the %/& finds anythe PC% cards. %f the %/& finds any
errors during the P/&+, it will notifyerrors during the P/&+, it will notifyyou by a series of beeps or a te$tyou by a series of beeps or a te$tmessage displayed on the screen. Anmessage displayed on the screen. Anerror at this point is almost always aerror at this point is almost always ahardware problem.hardware problem.
C"/&C"/& Also known as aAlso known as a!+C*DB!A" or C"/&!+C*DB!A" or C"/&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
153/266
!+C*DB!A" or C"/&!+C*DB!A" or C"/&!A", C"/& is short!A", C"/& is short
for Complementaryfor Complementary"etal-/$ide"etal-/$ide&emiconductor&emiconductor
C"/& is an on-boardC"/& is an on-board
semiconductor chipsemiconductor chippowered by a C"/&powered by a C"/&battery inside %"battery inside %"compatible computerscompatible computers
that stores such asthat stores such asthe system time andthe system time andsystem settings forsystem settings foryour computer.your computer.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
154/266
CP&CP&
ProcessorProcessor
BrainBrain
ProcessorProcessor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
155/266
The C) is the (rain of the computer. $ometimesThe C) is the (rain of the computer. $ometimes
referred to simply as the central processor , (ut morereferred to simply as the central processor , (ut more
commonly called processor, the C) is where mostcommonly called processor, the C) is where most
calculations take place. 3n terms of computing power, thecalculations take place. 3n terms of computing power, theC) is the most important element of a computerC) is the most important element of a computer
system.system.
CP&CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
156/266
The C) itself is an internal component of theThe C) itself is an internal component of thecomputer. %odern C)s are small and square andcomputer. %odern C)s are small and square and
contain multiple metallic connectors or pins on thecontain multiple metallic connectors or pins on the
underside. The C) is inserted directly into a C)underside. The C) is inserted directly into a C)
socket, pin side down, on the mother(oard.socket, pin side down, on the mother(oard.
CP&CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
157/266
Two typical components of a C) are the followingJTwo typical components of a C) are the followingJ
The arithmetic logic unit #2, which performsThe arithmetic logic unit #2, which performs
arithmetic and logical operations.arithmetic and logical operations.
The control unit C2, which e8tracts instructions fromThe control unit C2, which e8tracts instructions from
memory and decodes and e8ecutes them, calling on thememory and decodes and e8ecutes them, calling on the
# when necessary.# when necessary.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
158/266
CISC s +ISCCISC s +ISC
This tradeoff in (asic instruction set design philosophy isThis tradeoff in (asic instruction set design philosophy is
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
159/266
This tradeoff in (asic instruction set design philosophy isg p p y
reflected in the two main la(els gi"en to instruction sets.reflected in the two main la(els gi"en to instruction sets.
CISCCISCstands forstands for complex instruction setcomplex instruction set computer and iscomputer and isthe name gi"en to processors that use a large num(er ofthe name gi"en to processors that use a large num(er of
complicated instructions, to try to do more work withcomplicated instructions, to try to do more work with
each one.each one.
RISCRISCstands forstands for reduced instruction set computerreduced instruction set computerand isand is
the generic name gi"en to processors that use a smallthe generic name gi"en to processors that use a small
num(er of simple instructions, to try to do less work withnum(er of simple instructions, to try to do less work with
each instruction (ut e8ecute them much faster.each instruction (ut e8ecute them much faster.
Processor < CP& < BrainProcessor < CP& < Brain
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
160/266
ChipsetChipset
The chipset consists of two ma=or microchips These areThe chipset consists of two ma=or microchips These are
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
161/266
The chipset consists of two ma=or microchips. These areThe chipset consists of two ma=or microchips. These are
known as the !orth (ridge and the $outh 6ridge. Theknown as the !orth (ridge and the $outh 6ridge. The
!orth 6ridge andles data for the #?) )ort and the!orth 6ridge andles data for the #?) )ort and the
main memory which includes the @$6 @ront side (us2.main memory which includes the @$6 @ront side (us2.
#lthough (oth chips are required for the )C to work the#lthough (oth chips are required for the )C to work the
!orth 6ridge handles most of the "ery important tasks!orth 6ridge handles most of the "ery important tasks
such as the connection (etween the C) and mainsuch as the connection (etween the C) and main
memory. The $outh 6ridge handles data from the )C3memory. The $outh 6ridge handles data from the )C3
and 3$# slots and can also ha"e integrated componentsand 3$# slots and can also ha"e integrated components
such as #udio codec's etc.such as #udio codec's etc.
Sinle core processorSinle core processor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
162/266
Dual core processorDual core processor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
163/266
Dual core processorDual core processor
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
164/266
&AD C*+E CP&&AD C*+E CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
165/266
Intel uad"Core Technolo)Intel uad"Core Technolo)
&eli"ering four complete e8ecution cores within&eli"ering four complete e8ecution cores within
a single processor, 3ntel quad-core technology isa single processor, 3ntel quad-core technology isthe ideal choice when it comes to your high-the ideal choice when it comes to your high-
performance computing needs.performance computing needs.
uad Coreuad Core
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
166/266
Intel i9 CP&Intel i9 CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
167/266
i9 < i5 CP&i9 < i5 CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
168/266
i/ CP&i/ CP&
The 3ntelR CoreS iB processor family with 3ntelR &The 3ntelR CoreS iB processor family with 3ntelR &
? hi d li l ti hit t f? hi d li l ti hit t f
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
169/266
?raphics deli"ers a re"olutionary new architecture for an?raphics deli"ers a re"olutionary new architecture for an
unparalleled computing e8perience. #s the first le"el inunparalleled computing e8perience. #s the first le"el in3ntel's new processor family, the 3ntel Core iB processor3ntel's new processor family, the 3ntel Core iB processor
is the perfect entry point for a fast, responsi"e )Cis the perfect entry point for a fast, responsi"e )C
e8perience.e8perience.
This processor comes equipped with 3ntel & ?raphics,This processor comes equipped with 3ntel & ?raphics,
an ad"anced "ideo engine that deli"ers smooth, high-an ad"anced "ideo engine that deli"ers smooth, high-
quality & "ideo play(ack, and ad"anced B&quality & "ideo play(ack, and ad"anced B&
capa(ilities, pro"iding an ideal graphics solution forcapa(ilities, pro"iding an ideal graphics solution fore"eryday computing.e"eryday computing.
i/ CP&i/ CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
170/266
/ chip to : chip Architecture/ chip to : chip Architecture
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
171/266
Intel i9 coreIntel i9 core -eatures-eatures
The new ?# 1BDD socket is incompati(le with earlierThe new ?# 1BDD socket is incompati(le with earlier
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
172/266
The new ?# 1BDD socket is incompati(le with earlierp
processors.processors.
7n-die memory controllerJ the memory is directly7n-die memory controllerJ the memory is directly
connected to the processor.connected to the processor.
Three channel memoryJ each channel can support oneThree channel memoryJ each channel can support one
or two &&FB &3%%s. %other(oards for Core iA ha"eor two &&FB &3%%s. %other(oards for Core iA ha"e
four BH12 or si8 &3%% slots instead of two or four, andfour BH12 or si8 &3%% slots instead of two or four, and&3%%s should (e installed in sets of three, not two.&3%%s should (e installed in sets of three, not two.
$upport for$upport for &&FB&&FBonly.only.
!o CC support.!o CC support.
The front side (us is replaced (y uick )ath interface.The front side (us is replaced (y uick )ath interface.
%other(oards must use a chipset that supports%other(oards must use a chipset that supports
uick)ath.uick)ath.
Intel i9 coreIntel i9 core The following cachesJThe following cachesJ
B< L6 1 instruction and B< L6 1 data cache per coreB< L6 1 instruction and B< L6 1 data cache per core
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
173/266
B< L6 1 instruction and B< L6 1 data cache per coreB< L6 1 instruction and B< L6 1 data cache per core
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
174/266
i5 Intel CP&i5 Intel CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
175/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
176/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
177/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
178/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
179/266
1 (it CP&1 (it CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
180/266
A,D !Advanced ,icro Devices# " CP&sA,D !Advanced ,icro Devices# " CP&s
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
181/266
CP& " C)ri3CP& " C)ri3
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
182/266
Data Transfer ,anaement B) CP&Data Transfer ,anaement B) CP&
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
183/266
)37 %ode)37 %ode
3nterrupt Controller %ode3nterrupt Controller %ode
&%# %ode&%# %ode
PI*PI*
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
184/266
)rogramma(le 3nput 7utput %ode)rogramma(le 3nput 7utput %ode
3n this mode C) is responsi(le for 3nstruction3n this mode C) is responsi(le for 3nstruction
processing as well as data transferprocessing as well as data transfer
$o less performance$o less performance
%ore latency%ore latency
PICPIC
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
185/266
3n computing, a3n computing, a proramma(le interrupt controllerproramma(le interrupt controller
PICPIC2 is a de"ice that is used to com(ine se"eral sources2 is a de"ice that is used to com(ine se"eral sources
of interrupt onto one or more C) lines, while allowingof interrupt onto one or more C) lines, while allowing
priority le"els to (e assigned to its interrupt outputs.priority le"els to (e assigned to its interrupt outputs.
hen the de"ice has multiple interrupt outputs to assert,hen the de"ice has multiple interrupt outputs to assert,
it will assert them in the order of their relati"e priority.it will assert them in the order of their relati"e priority.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
186/266
D,AD,A
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
187/266
Direct memor) accessDirect memor) access D,AD,A2 is a feature of modern2 is a feature of modern
computers and microprocessors that allows certaincomputers and microprocessors that allows certain
hardware su(systems within the computer to accesshardware su(systems within the computer to access
system memory for reading and>or writing independentlysystem memory for reading and>or writing independentlyof the central processing unit.of the central processing unit.
igh performance (ecause data transfer work is done (yigh performance (ecause data transfer work is done (y
&%# controller. C) is doing only instruction processing&%# controller. C) is doing only instruction processingwork.work.
D,AD,A
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
188/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
189/266
)ower $upply)ower $upply
Po$er Suppl)Po$er Suppl)
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
190/266
#C#C
&C&C
6rownout or sag6rownout or sag
6lackout6lackout
S,PSS,PS
## it h d d ls$itched mode po$er suppl) it hi ds$itchin mode
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
191/266
## s$itched"mode po$er suppl)s$itched"mode po$er suppl) s$itchin"modes$itchin"mode
po$er suppl)po$er suppl)>>S,PSS,PS, or simply, or simply s$itchers$itcher2 is an2 is anelectronic power supply unit )$2 that incorporates aelectronic power supply unit )$2 that incorporates a
switching regulator in order to pro"ide the requiredswitching regulator in order to pro"ide the required
output "oltages &C2.output "oltages &C2.
7utput &C Koltages7utput &C Koltages
HB.B ", HE ", H 1
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
192/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
193/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
194/266
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
195/266
ServerServer
# d i k h# t d i t k th t
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
196/266
# computer or de"ice on a network that manages# computer or de"ice on a network that manages
network resources. @or e8ample, a file ser"er is anetwork resources. @or e8ample, a file ser"er is a
computer and storage de"ice dedicated to storing files.computer and storage de"ice dedicated to storing files.
# print ser"er is a computer that manages one or more# print ser"er is a computer that manages one or more
printers.printers.
# network ser"er is a computer that manages network# network ser"er is a computer that manages network
traffic.traffic.
# data(ase ser"er is a computer system that processes# data(ase ser"er is a computer system that processesdata(ase queries.data(ase queries.
ServerServer
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
197/266
$er"ers are often dedicated, meaning that they perform$er"ers are often dedicated, meaning that they perform
no other tasks (esides their ser"er tasks. 7nno other tasks (esides their ser"er tasks. 7n
multiprocessing operating systems, howe"er, a singlemultiprocessing operating systems, howe"er, a single
computer can e8ecute se"eral programs at once.computer can e8ecute se"eral programs at once.
3n the client>ser"er programming model, a ser"er is a3n the client>ser"er programming model, a ser"er is a
program that awaits and fulfills requests from clientprogram that awaits and fulfills requests from client
programs in the same or other computers.programs in the same or other computers.
ClientClient
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
198/266
# client does not share any of its resources, (ut requests# client does not share any of its resources, (ut requests
a ser"er's content or ser"ice function. Clients thereforea ser"er's content or ser"ice function. Clients therefore
initiate communication sessions with ser"ers which awaitinitiate communication sessions with ser"ers which awaitlistenlistento2 incoming requests.to2 incoming requests.
To$er ,odel ServersTo$er ,odel Servers
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
199/266
P" Series ServerP" Series Server
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
200/266
Blade ServerBlade Server
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
201/266
## (lade server(lade server is a stripped down ser"er computer withis a stripped down ser"er computer with
a modular design optimied to minimie the use ofa modular design optimied to minimie the use of
physical space and energy.physical space and energy.
6lade ser"ers ha"e many components remo"ed to sa"e6lade ser"ers ha"e many components remo"ed to sa"e
space, minimie power consumption and otherspace, minimie power consumption and other
considerations, while still ha"ing all the functionalconsiderations, while still ha"ing all the functional
components to (e considered a computer.components to (e considered a computer.
Blade ServerBlade Server
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
202/266
Blade ServerBlade Server
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
203/266
+ac; < & Sie+ac; < & Sie
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
204/266
quipment designed to (e placed in a rack is typicallyquipment designed to (e placed in a rack is typically
descri(ed asdescri(ed as rac;"mountrac;"mount,, rac;"mount instrumentrac;"mount instrument, a, a
rac; mounted s)stemrac; mounted s)stem, a, a rac; mount chassisrac; mount chassis,, su(su(
rac;rac;,, rac; mounta(lerac; mounta(le, or occasionally simply, or occasionally simply shelfshelf..
The height of the electronic modules is also standardiedThe height of the electronic modules is also standardied
as multiples ofas multiples of .=95 inches !1=115 cm# or one rac;.=95 inches !1=115 cm# or one rac;
unit or F&F=unit or F&F=
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
205/266
*peratin S)stem " *S*peratin S)stem " *S
#n operating system is a program designed to manage#n operating system is a program designed to manage
and run hardwares / other programs on a Computer. #and run hardwares / other programs on a Computer. #
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
206/266
computer*s operating system is its most importantcomputer*s operating system is its most importantprogram. 3t is considered the (ack(one of a computer,program. 3t is considered the (ack(one of a computer,
managing (oth software and hardware resources.managing (oth software and hardware resources.
7perating systems are responsi(le for e"erything from7perating systems are responsi(le for e"erything fromthe control and allocation of memory to recogniing inputthe control and allocation of memory to recogniing input
from e8ternal de"ices and transmitting output tofrom e8ternal de"ices and transmitting output to
computer displays. They also manage files on computercomputer displays. They also manage files on computer
hard dri"es and control peripherals, like printers andhard dri"es and control peripherals, like printers and
scanners.scanners.
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
207/266
Soft$are < *SSoft$are < *S
$oftware refers to the instructions, or programs, that tell$oftware refers to the instructions, or programs, that tell
the hardware what to do # word processing programthe hardware what to do # word-processing program
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
208/266
the hardware what to do. # word-processing programthe hardware what to do. # word-processing program
that you can use to write letters on your computer is athat you can use to write letters on your computer is a
type of software.type of software.
TheThe operatin s)stemoperatin s)stem 7$2 is software that manages7$2 is software that manages
your computer and the de"ices connected to it. indowsyour computer and the de"ices connected to it. indows
is a well-known operating system.is a well-known operating system.
*S*S
7$ does C) %anagement7$ does C) %anagement
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
209/266
7$ does %emory %anagement7$ does %emory %anagement 7$ does ardware %anagement7$ does ardware %anagement
7$ (ridges users with computer7$ (ridges users with computer
7$ gi"es life to a Computer7$ gi"es life to a Computer
ithout 7$ Computer is a &ead %achineithout 7$ Computer is a &ead %achine
pon 7$ only #ll #pplication $oftware's will runpon 7$ only #ll #pplication $oftware's will run
Boot Se>uence G Win 05Boot Se>uence G Win 05
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
210/266
)ower 7! + 637$ + )7$T + 6$ + %6F + 37.$V$ +)ower 7! + 637$ + )7$T + 6$ + %6F + 37.$V$ +
$V$3!3T + %$&7$.$V$ + C7!@3?.$V$ +$V$3!3T + %$&7$.$V$ + C7!@3?.$V$ +
#T7C.6#T + C7%%#!&.C7%#T7C.6#T + C7%%#!&.C7%
Boot Se>uence Win PBoot Se>uence Win P
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
211/266
)ower on + 637$ + )7$T + 6$ + %6F + !T&F +)ower on + 637$ + )7$T + 6$ + %6F + !T&F +677T.3!3 + !T&TCT.C7% + !T7$LF!. +677T.3!3 + !T&TCT.C7% + !T7$LF!. +
#.& + $V$T% F?3$TFV + 3!7?7!. +#.& + $V$T% F?3$TFV + 3!7?7!. +
$#$$.$#$$.
P Boot Se>uenceP Boot Se>uence
@irst is the )7$T this stands for )ower 7n $elf Test for@irst is the )7$T this stands for )ower 7n $elf Test for
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
212/266
@irst is the )7$T, this stands for )ower 7n $elf Test, for@irst is the )7$T, this stands for )ower 7n $elf Test, for
the computer. This process tests memory as well as athe computer. This process tests memory as well as anum(er of other su(systems. Vou can usually monitornum(er of other su(systems. Vou can usually monitor
this as it runs each test.this as it runs each test.
#fter that is complete the system will run )7$T for any#fter that is complete the system will run )7$T for any
de"ice that has a 637$ 6asic 3nput-7utput $ystem2. #nde"ice that has a 637$ 6asic 3nput-7utput $ystem2. #n
#?) has its own 637$, as do some network cards and#?) has its own 637$, as do some network cards and
"arious other de"ices."arious other de"ices.
P Boot Se>uenceP Boot Se>uence
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
213/266
7nce the )7$T is complete and the 637$ is sure that7nce the )7$T is complete and the 637$ is sure that
e"erything is working properly, the 637$ will thene"erything is working properly, the 637$ will then
attempt to read the %6F %aster 6oot Fecord2.attempt to read the %6F %aster 6oot Fecord2.
This is the first sector of the first hard dri"e called theThis is the first sector of the first hard dri"e called the
%aster or &02. hen the %6F takes o"er it means that%aster or &02. hen the %6F takes o"er it means that
indows is now in control.indows is now in control.
P Boot Se>uenceP Boot Se>uence
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
214/266
The %6F looks at the 677T $CT7F the first sector ofThe %6F looks at the 677T $CT7F the first sector ofthe acti"e partition2. That is where !T&F is located,the acti"e partition2. That is where !T&F is located,
!T&F is the 677T 7#&F for indows ).!T&F is the 677T 7#&F for indows ).
!T&F will allow memory addressing, initiate the file!T&F will allow memory addressing, initiate the filesystem, read the (oot.ini and load the (oot menu.system, read the (oot.ini and load the (oot menu.
!T&F has to (e in the root of the acti"e partition as do!T&F has to (e in the root of the acti"e partition as do
!T&TCT.C7%, 677T.3!3, 677T$CT.&7$ for!T&TCT.C7%, 677T.3!3, 677T$CT.&7$ formulti-7$ (ooting2 and !T677T&&.$V$ if you ha"emulti-7$ (ooting2 and !T677T&&.$V$ if you ha"e
$C$3 adapters2$C$3 adapters2
P Boot Se>uenceP Boot Se>uence
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
215/266
7nce ) is selected from the 6oot %enu, !T&F will7nce ) is selected from the 6oot %enu, !T&F will
run !T&TCT.C7%, 677T.3!3 and 677T$CT.&7$run !T&TCT.C7%, 677T.3!3 and 677T$CT.&7$
to get the proper 7$ selected and loaded. The systemto get the proper 7$ selected and loaded. The system
starts in 1D-(it real mode and then mo"es into B
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
216/266
!T&F will then load !T7$LF!. and #.&.!T&F will then load !T7$LF!. and #.&.ffecti"ely, these two files are windows ). They mustffecti"ely, these two files are windows ). They must
(e located in G$ystemFootG$ystemB
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
217/266
Trou(le ShootinTrou(le Shootin
Beep CodesBeep Codes
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
218/266
Error CodesError Codes 188188 -- $ystem 6oard errors$ystem 6oard errors
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
219/266
B88B88 -- Ley(oard errorLey(oard error
488488 -- %onochrome "ideo pro(lem%onochrome "ideo pro(lem
E88E88 -- Colour "ideo pro(lemColour "ideo pro(lem
D88D88 -- @loppy disk pro(lem@loppy disk pro(lem
1D11D1 -- C%7$ (attery failureC%7$ (attery failure
1A011A01 -- && pro(lems&& pro(lems
1A;01A;0 -- &ri"e 0 pro(lem&ri"e 0 pro(lem
1A;11A;1 -- &ri"e 1 pro(lem&ri"e 1 pro(lem
S)stem Slo$S)stem Slo$
Fun &efragmentation
-
7/25/2019 HARDWARE AND NETWORKING TRAINING IN CHENNAI - IICT DOCS
220/266