Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and...

6
Model: 34105 Thank you for your purchase of the Artistic® LED Erasable Message Board with Programmable Message sign. Please follow the easy set-up instructions below: Diagram 1 Diagram 2 Diagram 3 Hanging & Installation 1) Locate pa rts (hang chains and power cord) located within the packaging 2) Hook the chains through the hanger tabs (Diagram 1 ). When ready to hang on your wall, make sure to use wall anchors (not supplied) before hanging the chain over a wall hanger hook or screws. 3) Insert barrel plug of AC adaptor into the input receptor on the right side of the sign and plug adapter into your wall (Diagram 2) 4) Use only 100-240VAC input, 50 - 60Hz, 5 V - 4A output adaptor supplied 5) To turn on the sign, press the switch on the power co rd to the "on" position (Diagram 3) and proceed below to program the message. LED Display Instructions 1) Download the Phone APP for your Android* or Apple* phone by scanning in the QR code below and install the LED PRO APP on your phone 2) If you are using an IPhone® 7* you may get an error message when trying to start the program. You will need to open the "Settings" section on your home page first.

Transcript of Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and...

Page 1: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

Model: 34105

Thank you for your purchase of the Artistic® LED Erasable Message Board with Programmable Message sign.

Please follow the easy set-up instructions below:

Diagram 1 Diagram 2 Diagram 3

Hanging & Installation 1) Locate parts (hang chains and power cord) located within the packaging

2) Hook the chains through the hanger tabs (Diagram 1 ). When ready to hang

on your wall, make sure to use wall anchors (not supplied) before hanging

the chain over a wall hanger hook or screws.

3) Insert barrel plug of AC adaptor into the input receptor on the right side of the

sign and plug adapter into your wall (Diagram 2)

4) Use only 100-240VAC input, 50 - 60Hz, 5 V - 4A output adaptor supplied

5) To turn on the sign, press the switch on the power cord to the "on" position

(Diagram 3) and proceed below to program the message.

LED Display Instructions 1) Download the Phone APP for your Android* or Apple* phone by scanning in

the QR code below and install the LED PRO APP on your phone

2) If you are using an I Phone® 7* you may get an error message when try ing to start the program. You will need to open the "Settings" section on your home page first.

Page 2: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

••ooo Verizon 9 10:02 AM

<Settings General

Date& Time

Keyboard

Language & Region

Dictionary

iTunes Wi-Fi Sync

VPN Not Connected

Device Management Shanghai ZOEHOO ..

Regulatory

Reset

Diagram 4

••ooo Verizon 9 10:03 AM -1 76% m)

< Shanghai ZOEHOO Electronic Techn ...

Apps from developer "iPhone Distribution: Shanghai ZOEHOO Electronic Technology Co., Ltd." are not trusted on this iPhone and will not run until the developer is trusted.

Trust "Shanghai ZOEHOO Electronic Techn ..

APPS FROM DEVELOPER "IPHONE DISTRIBUTION:

SHANGHAI ZOEHOO ELECTRONIC TECHNOLOGY CO.,

LTD."

LED Mobile Pro Verified

Diagram 6

••ooo Verizon 9 10:02 AM .., t 76% llllO

( General Device Management

ENTERPRISE APP

(~ Shanghai ZOEHOO Electronic Te ...

Diagram 5

••ooo Verizon • 10:03AM .., 76"-)

< Shanghai ZOEHOO Electronic Techn ••.

Trust " iPhone Distribution: Shanghai ZOEHOO Electronic Technology Co., Ltd ." Apps

on This iPhone Trust ing will allow any app from this fied enterprise developer to be used on

your iPhone and may allow access to your data.

Cancel Trust

Diagram 7

3) Next, press the "Genera l" tab and then press the "Device Management. " tab (Diagram 4 ).

4) Select the "Shanghai ZOEHOO Electric Te ... " tab (Diagram 5). 5) Press the "Trust "Shanghai ZOEHOO Electroni c Techn ... " tab (Diagram 6)

and then Press the Trust button (Diagram 7). 6) Open the LED Mobi le App and you w ill see the fo llowing screen (Diagram 8).

Page 3: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

Menu

B [:J ;tl: EB 0 iiii I I I I I I 'w 111 , _____

Size v ~ Kerning u 0 Leading u 0 Speed ~ Stop 0

Text Display In Type Continuous Move Left v j Style

Border None v] @]

Connect to Apply Display Setting

Diagram 8 7) Before you can edit the text, you must connect to the built-in Wifi network.

Open up your "Wifi " settings under the Settings tab on your phone. Se lect the Wifi network, "ZH-WX_XXX" . The Password is 12345678.

8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button.

9) To change the Wifi Password, after you have connected to the network, open the Menu button (D iagram 9) and select "ChangeWIFIPassword". Select your new password as desired .

10) Next, go to the top right of the screen and open the Menu button (Diagram 9) and select ScreenSet.

11) Under Line Type choose "Shortcut Configuration: w ithin conventional household" (Diagram 1 0).

12) Set the Width to 64, Height 16, OEType-- OE Negative, Data Type-Data Positive and hit the " Load" button.

13) Hit the arrow on the top of the screen to return to the Main sc reen. Type in your desired message and adjust the speed and direction and hit "Send" to load your message (Diagram 11 ).

14) If you message is not centering in the middle of the sc reen, you may need to adjust the lead ing until it is centered.

15) To slow the speed of you r message, increase the number by sliding the button to the right. (Diagram 11 ).

Page 4: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

Font

Size

Speed

Find

Type: ZH-Wm

Version: 3.08.05

LineType Shortcut Co .. nal household v

ZH-Wm_A002CD

3.08.05

Color

Load

64 v

16 v

OE Negative v

Data Positive v

Diagram 9 Diagram 10

[welcome :

Font [ Copperplate v J [I] IT] •

Size ~

Kerning \...) 0 Leading \...) 0 Speed

ZH-Wm_A002CD

3.08.05

Diagram 11

Page 5: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

Using Erasable Message Board 1. Use the included dry eraser marker to write you r message. Before use, shake

vigorously with the cap on and the marker up-right. 2. Press the tip on the glass board for a few seconds to allow the ink to fill up and

proceed to write your message. 3. Store the marker with the cap on in a horizontal position. 4. To erase your message, use the included erasure and wipe the message off of

the glass surface. The marker is water based so if you are having difficulty removing the message you can use a soft cloth with some water on it to help.

Changing Color of Written Message 1. To change the color of your message, press the button (Diagram 8) as indicated.

There are several colors and modes available. 2. A fl ashing mode for each color is included, as well as a mode that cycles

through each color including red, blue, green and purple.

CAUTION: To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons: • This product is intended for indoor use only. Do not use in damp or wet locations • Not for use with light dimmer circuits • To reduce the likelihood of injury or damage mount only on a surface that is

mechanically sound • Do not use extension cords or outlets with inadequate cu rrent carrying capacity • It is recommended to use a surge protector. Power surges ARE NOT covered

under the warranty for this product • Only use 100-240VAC input, 50 - 60Hz, 5 V - 4A output adaptor • Do not hand le adapter or sign with wet hands • Disconnect power before handling or cleaning • Do not spray liquid or aerosol cleaners directly onto sign. Use a dry or damp

cloth for cleaning • This product is full y assembled and ready to use. Do not attempt to disassemble

or service as it will void the warranty • Do not alter the plug or power supply cord in any way

*/Phone is registered trademark of APPLE" and Android ™ is a trademark of Google Inc.

Page 6: Hanging Installation · 8) Once you are connected to the Wifi network return to the LED PRO app and press the "Find" button. 9) To change the Wifi Password, after you have connected

LIMITED WARRANTY

Artistic Products LLC ("Artistic") warrants to the verified purchaser of the original product (herei nafter 'the Customer') that the Artistic product for which the Customer received this warranty was designed, developed and/or fabricated used all due reasonable commercia l care and good manufacturing practices. Artistic's product shall be free from defects in material and workmanship for 1 Year from date of purchase as evidenced by a valid receipt. Artistic's sole obligation under this warranty is to repair or replace the product, at Artistic's option. Artistic must be notified in writing of any claim under this warranty within 30-days of any claimed lack of conformity of the product at the address hereinafter set forth.

WARRANTY LIMITATIONS: The duration of any implied warranty or condition, of merchantability, fitness for a particular purpose, or otherwise, on this product shall be limited to the duration of the express warranty set forth above. In no event, shall Artistic be liable for any loss, inconvenience or damage, whether direct, incidental, consequential or otherwise, resulting from breach of any express or implied warranty or condition, of merchantability, fitness for a particular purpose or otherwise with respect to this product, except as set forth herein. Some states or countries do not al low limitation on how long an implied warranty lasts and some do not allow exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which may vary, from location to location. This warranty shall be interpreted pursuant to the laws of the United States and the State of New York. The original English language version (meaning) of this warranty controls over all translations; Artistic is not responsible for any errors in translation of this warranty and/or any product instructions. This warranty is not intended to confer any additional legal, jurisdictional or warranty rights to you other than those set forth herein or required by law. If any portion of this warranty is held to be invalid or unenforceable for any reason, such finding will not invalidate any other provision. For products purchased in countries other than the United States, please contact the retailer from wh ich the product was purchased.

WARRANTY EXCLUSIONS: This warranty does not cover products that have been modified, neglected, poorly maintained, misused or abused.

Return Authorization Requests: Requests for return authorization should be sent to Artistic Products LLC, 125 Commerce Drive, Hauppauge, NY 11788. 631-435- 0200, attention: Customer Service.

Artistic Products LLC, 125 Commerce Drive, Hauppauge, NY 11788 (800)-2 7 4-7824