Hand and Cardboard prints

By Zoe Davidson and Georgia Vaughan

SeahorsesYou will need an piece of art paper.

Red and yellow paint on a paper plate News paper

A tiny bit of black paintAnd your own hand!!

Paper towel to clean your hands

Step 1Pour two shades of paint onto a piece

of newspaper.

Step 2To make the seahorses head, dip the top of your fingers in the paint. Place your fingers on the paper.

Step 3

Press your knuckles into the paint. Turn your hands sideways and print a

body for your seahorse.

Step 4

Dip one of your fingers in the paint and paint on a long snout.

Step 5Use the same finger to print three fins. Also paint on more of the tail.

Step 6

Use two finger tips and dip them in the paint. Print a two circles at the end of the snout. also print some

along the head.

Step 7

Finish the tail by doing several prints with a fingertip. Curve them around

as you go.

Step 8

To make the eye dip a finger tip in black paint and print a dot in the

middle of the head.

Little Rainbow fish

What you needPink and orange paint on a paper

plate Black paint

Step 1Press the fat part of your thumb into

the mixed paint.Print it onto the page

Step 2Add a tail with a fingertip. For the eye

place a dot of black paint

How to make Crabs.You will need,A piece of normal white cardboard, orange paint, piece of A4 white paper per person and some black paint.

Step 1

Print the crab’s body with your thumb. Cut a piece of thin cardboard, about 3cm long, then cut a 2nd piece of cardboard about 3cm long, them cut the 3rd piece of cardboard 4cm long!

Step 2

Dip the edge of the cardboard into paint and use it to print legs. Curve it as you print.

Step 3Use a small piece of cardboard to print V-shaped pincers on the front legs

Step 4

Print stalks for eyes. Do the eyes with a fingertip. Add dots when the paint is dry.

THEN ENJOY

How to make Fan Fish1- Dip the end of a thin piece of cardboard into two or three types of colours.

2-press it onto your paper, then twist one end to make a fan shape. Turn the paper.

3- Print another fan to finish the body. Then print a narrow one for the tail.

4- Print the fins with cardboard. Do the eye with a fingertip when the paint is dry.