Guía de inicio 3 vídeo 2 · 2014. 8. 28. · If the Alarm lamp (B) flashes orange, press the ON...
Transcript of Guía de inicio 3 vídeo 2 · 2014. 8. 28. · If the Alarm lamp (B) flashes orange, press the ON...
3
2
1
XXXXXXXX © CANON INC. 2013
1
2
4
1
2
3
4
(B)
(A)
1
2
3
4
1
2
3
1 2
EN
ES
EN
ES
ENES
EN
ES
EN
ES
EN
ES
No conecte aún el cable USB.
Si la luz de Alarma (Alarm) parpadea (B) en naranja, pulse el botón ACTIVADO (ON) para apagar el equipo y repita desde .
Compruebe que la luz de ACTIVADO (ON) (A) se ilumina en verde.
Tenga cuidado con la tinta de la cinta protectora.
Inserte el cartucho FINE (FINE Cartridge) en ángulo dentro de la ranura.
Empuje el cartucho FINE (FINE Cartridge) firmemente hacia dentro y hacia arriba hasta que encaje en su sitio.
ESPAÑOL
Guía de inicioSe dispone de tutoriales en vídeo
Do not connect the USB cable yet.
If the Alarm lamp (B) flashes orange, press the ON button to turn OFF the machine, then redo from .
Check that the ON lamp (A) lights green.
Be careful of ink on the protective tape.
Insert the FINE Cartridge into the slot at an angle.
Push the FINE Cartridge in and up firmly until it snaps into place.
ENGLISH
Getting Started
Video Tutorials Available
QT5-6395-V02 PRINTED IN XXXXXXXX
5451
2
3
4
5
6
(B)
(A)
EN
ES
EN
ES
ENES
ENES
ENES
Repita de a para instalar el otro cartucho FINE (FINE Cartridge).
Si la luz de Alarma (Alarm) (B) parpadea en naranja, compruebe que ambos cartuchos FINE (FINE Cartridges) de negro y de color estén instalados correctamente.
Espere hasta que se ilumine la luz ACTIVADO (ON) (A) y continúe.
Cargue papel con el lado de impresión hacia arriba. Manuales
Instale el software en sus dispositivos.
Repeat to to install the other FINE Cartridge.
If the Alarm lamp (B) flashes orange, check that the both black and color FINE Cartridges are installed correctly.
Wait until the ON lamp (A) is lit, then proceed.
Load paper with the print side facing up.Manuals
Install the software on your devices.