Gates - CW Products | Australian Made Roller Shutters ... brochure.pdfGates MOTORS & ACCESSORIES...
Transcript of Gates - CW Products | Australian Made Roller Shutters ... brochure.pdfGates MOTORS & ACCESSORIES...
Gates
MOTORS & ACCESSORIES
Motor Selection Chart ....................................... 2-3
Ax 24ns Controller ........................................... 4-5
Fx 24ns & Fx230 Controller ..................................6-7
Ixengo S ...................................................... 8-9
Ixengo L ..................................................... 10-11
Axovia 400Cns ............................................... 12-13
Elixo 500 ....................................................14-15
Axovia Multi Prons .......................................... 16-17
Axovia 220Ans .............................................. 18-19
Axovia 180Bns .............................................. 20-21
RTS Transmitters - Gate Openers ............................22
Electronic Accessories - Gate Openers ..................... 23
Accessories - Gate Openers .................................. 24
[ Gates: 2 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
GATE OPENER
MOTOR SELECTION CHART The following chart is a guide only.
Refer to the hardware manufacturer for more details.HOW TO USE THIS SELECTION CHART
• The maximum size (length and height) has been shown in relation to the maximum weight loading in each picture.
• Select the motor suitable by matching the installation type with the length, height and weight factors ensuring that the maximum’s noted are not exceeded.
• A safety factor has already been incorporated.
Jack System
1.8m
250
4m
400
IXENGO S IXENGO L
Sliding System
400 kg
8 m
2 m
8 m
2 m
500 Kg
AXOVIA 400Cns
ELIXO 500
Gate
Ope
ners Jack system
Ixengo S 24VIxengo S 230V Ixengo L 24VIxengo L 230V
Sliding System
Axovia 400Cns
Elixo 500 24VElixo 500 230V
Arm System
Axovia Multi Prons
Axovia 220Ans
Axovia 180Bns
[ Gates: 3 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
AXOVIA MULTI PROns
AXOVIA 220Ans
AXOVIA 180Bns
1.8m
2.5m
300kg
Standard Arm Kit •* • •†
Sliding Arm Kit •† •
Slope Opening Kit •
GATE WIDTH (M) <1.25 1.25 - 2 2 - 2.5
External Opening Kit • •Short leaf arm
recommended
Lightweight & partial
opening only
* The addition of PE Cells is recommended.† The addition of an Electric lock is recommended.
KIT
TYP
E
GATE OPENER
MOTOR SELECTION CHART The following chart is a guide only.
Refer to the hardware manufacturer for more details.HOW TO USE THIS SELECTION CHART
• The maximum size (length and height) has been shown in relation to the maximum weight loading in each picture.
• Select the motor suitable by matching the installation type with the length, height and weight factors ensuring that the maximum’s noted are not exceeded.
• A safety factor has already been incorporated.
Arm System
Gate
Ope
ners Jack system
Ixengo S 24VIxengo S 230V Ixengo L 24VIxengo L 230V
Sliding System
Axovia 400Cns
Elixo 500 24VElixo 500 230V
Arm System
Axovia Multi Prons
Axovia 220Ans
Axovia 180Bns
[ Gates: 4 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
GATE OPENER CONTROL BOARD
The AX24ns controls selected Somfy gate opener motors via remotes, key switches, photocells, intercoms, digital keypads and more. Acting as an interface between these various devices and the motor(s), the AX24ns has various programmable features ie. a soft start and stop, a self learning mode, opening and closing speed adjustment, etc.
With three main functions the AX24ns has enough features to accommodate almost any installation type.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: partial opening of gates to allow pedestrians or cyclists to pass through.
High Index Protection.
Integrated Lighting Receiver (500w).
LCD Programming screen.
Optional battery backup.
For use with the following Somfy Gate Openers:
Axovia Multi Prons
Axovia 180Bns
‡ Requires the use of photocells.
AX 24ns Ref. 1841032
AX 24ns
MAIN CHARACTERISTICS & FEATURES
[ Gates: 5 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
AX 24ns
TECHNICAL CHARACTERISTICS
Normal functioning temperature: -15°C to +55°C
Rated Voltage (VAC)
Rated Motor Voltage (VDC)
Rated Motor Power Consumption (W)
Thermal safety on Controller
Rated Accessories Voltage (VDC)
Accessories Current Consumption Max (A)
Accessories Power Consumption Max (W)
Max Usage (cycles/day)
Remote Memory
Index Protection
Approval
230
24
150
YES
24
1.2
500
250
16
IP55
AX 2
4n
s
230mm
180mm
90mm
18mm
NOTE
See Controls section for remote operators / accessories.
[ Gates: 6 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
GATE OPENER CONTROL BOARD
The FX24 / FX230 controls selected Somfy gate opener motors via remotes, key switches, photocells, intercoms, digital keypads and more. With an easy to use LCD programming menu, setup has never been quicker. Acting as an interface between these various devices and the motor(s), the FX24 / FX230 has various programmable features ie. a soft start and stop, a self learning mode, opening and closing speed adjustment, etc. With three main functions the FX24 / FX230 has enough features to accommodate almost any installation type.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: partial opening of gates to allow pedestrians or cyclists to pass through.
High Index Protection.
Suitable for residential applications.
For use with the following Somfy Gate Openers:
Ixengo S
Ixengo L
‡ Requires the use of photocells.
FX 24 Ref. 1841098
FX 24
FX 230
MAIN CHARACTERISTICS & FEATURES
FX 230 Ref. 1841099
[ Gates: 7 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
FX 24
FX 230
TECHNICAL CHARACTERISTICS
Normal functioning temperature: -15°C to +55°C
Rated Voltage (VAC)
Rated Motor Voltage (V)
Rated Motor Power Consumption (W)
Thermal safety on Controller
Rated Accessories Voltage (VAC)
Accessories Current Consumption Max (A)
Accessories Power Consumption Max (W)
Max Usage (cycles/day)
Remote Memory
Index Protection
Approval
FX 2
4
230
230 AC
300
YES
24
4.3
180
60
36
IP55
FX 2
30
230
24 DC
40
YES
24
4.3
180
60
36
IP55
NOTE
See Controls section for remote operators / accessories.
[ Gates: 8 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
24V DC OR 230V AC SWINGING GATE MOTOR
The economical and compact operation of the Ixengo S allows for a swinging gate to be opened and closed without the need of a large recess behind the gate. With its quiet operation, manual unlocking, obstacle detection, battery backup option and more, the Ixengo S is a comprehensive solution for motorisation of a gate opening.
Rapid opening within 12-16 seconds for a 90˚ gate.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system (special key) and backup battery (optional) for operating the gate in the event of an electricity power cut.
Quiet operation with adjustable limiting.
Anti break-in operation to counter forced entry if attempted.
Use with FX24 or FX230 controller (see Technical Characteristics on next page).†
* Per gate leaf.
† FX controller included in pack.
Ixengo S 24V Ref. 1216136 †
Ixengo S
MAIN CHARACTERISTICS & FEATURES
Ixengo S 230V Ref. 1216138 †
Max. Gate Weight (kg) 250 (@1.8m)*
Max. Gate Weight (kg) 250 (@1.8m)*
[ Gates: 9 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (V)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open (mm/s)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24DC
40
250*
1.8*
60
14
36
FX24
5
90,000
IP44
Ixengo S
24V
230
230AC
210
250*
1.8*
60
12
36
FX230
5
90,000
IP44
Ixengo S
230V
* Per gate leaf
80
801027
713 280
Ixengo S
TECHNICAL CHARACTERISTICS
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
NOTE
See Controls section for remote operators / accessories.
Antenna
Ixengo S RTS Motor
FX control system
[ Gates: 10 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
24V DC OR 230V AC SWINGING GATE MOTOR
The economical and compact operation of the Ixengo L allows for a swinging gate to be opened and closed without the need of a large recess behind the gate. With its quiet operation, manual unlocking, obstacle detection, battery backup option and more, the Ixengo L is a comprehensive solution for motorisation of a gate opening.
Rapid opening within 18 seconds for a 90˚ 400kg gate.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system and backup battery (optional) for operating the gate in the event of an electricity power cut.
Quiet operation with adjustable limiting.
Anti break-in operation to counter forced entry if attempted.
Use with FX24 or FX230 controller (see Technical Characteristics on next page).†
* Per gate leaf.
† FX controller included in pack.
Ixengo L
MAIN CHARACTERISTICS & FEATURES
Ixengo L 24V Ref. 1216137 †
Ixengo L 230V Ref. 1216139 †
Max. Gate Weight (kg) 400 (@ 4m)*
Max. Gate Weight (kg) 400 (@ 4m)*
[ Gates: 11 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (V)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open (mm/s)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24DC
40
400*
4*
60
14
36
FX24
5
90,000
IP44
Ixengo L
24V
230
230AC
210
400*
4*
60
12
36
FX230
5
90,000
IP44
Ixengo L
230V
* Per gate leaf
Ixengo L
TECHNICAL CHARACTERISTICS
80
max. 410
915
NOTE
See Controls section for remote operators / accessories.
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
Antenna
Ixengo L Motor
FX control system
[ Gates: 12 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Axovia 400C
ns
MAIN CHARACTERISTICS & FEATURES
Axovia 400Cns Ref. 1216086Max. Gate Weight (kg) 400 (@ 8m)
24V DC SLIDING GATE MOTOR
The Axovia 400Cns is a pinion drive motor for sliding gates. Suitable for wood, metal, PVC and other types of sliding installations. A quiet operation is achieved by using nylon racking and when partial opening is required a pedestrian access can be operated to approx 1.25m to allow quick thoroughfare. Combining maximum security, the Axovia 400Cns complies with current standards without the requirement of additional accessories. Integrated electronics, RTS receiver and power supply with a proximity programming system and an unlocking handle; allow the gate to be safely operated when needed and opened manually when required.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: partial opening of gates to allow pedestrians or cyclists to pass through.
Rapid opening within 20 seconds for a 3m gate.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system and backup battery (optional) for operating the gate in the event of an electricity power cut.
Integrated control board.
‡ Requires the use of photocells.
[ Gates: 13 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (VDC)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open to 3m (sec)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24
300
400
8
20
20
16
INTEGRATED
10.5
36,500
IP54
Axovia
400C
ns
Axovia 400C
ns
TECHNICAL CHARACTERISTICS
91,65mm
84mm
11mm
180,93mm
48mm
50mm
231mm
NOTE
See Controls section for remote operators / accessories.
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
Antenna
Key switch or keypad
Axovia 400Cns
Stop
Rack(bottom or top fi xation)
[ Gates: 14 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Elixo 500
MAIN CHARACTERISTICS & FEATURES
Elixo 500 24V Ref. 1216140Max. Gate Weight (kg) 500 (@ 8m)
24V DC OR 230V AC SLIDING GATE MOTOR
The Elixo 500 is a pinion drive motor for sliding gates. Suitable for larger sliding installations as well as gates that require a faster opening and closing operation. An Autoset mode, makes the installation learning sequence quick and easy but still allows for the adjustment of various parameters (speed, torque, etc…). Integrated obstacle detection with various security inputs, photocells, safety edges, etc. allow the Elixo 500 to be a robust and professional solution for sliding gates.
Available in two variants:
24 Volt major advantages:
• Fast opening and closing speed (15s for a 3m gate).
• Battery backup option for loss of power situations.
• Combined electronics / receiver / transformer.
230 Volt major advantages:
• Rated to a high number of cycles per day (100 for Elixo 230v).
• Lower installation cost.
• Combined electronics / receiver / transformer.
Integrated control board.
Elixo 500 230V Ref. 1216141Max. Gate Weight (kg) 500 (@ 8m)
[ Gates: 15 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (V)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open to 3m (sec)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24 DC
70
500
8
30
15
36
INTEGRATED
7
90,000
IP24
Elixo 5
00 2
4V
Elixo 500
TECHNICAL CHARACTERISTICS
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
Antenna
Key switch or keypad
ELIXO 500
Rack(bottom or top fi xation)
Ø65p
221
951
05
131 96
227
22
73
062
34
230
230 AC
290
500
8
100
22
36
INTEGRATED
15
90,000
IP24
Elixo 5
00 2
30V
NOTE
See Controls section for remote operators / accessories.
[ Gates: 16 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Axovia Multi Prons
MAIN CHARACTERISTICS & FEATURES
24V DC SWINGING GATE MOTOR
The Axovia Multi Prons is available with several arm styles that allow for specific swing gate motorisation, from a standard 90˚ to 130˚ opening to a sloped opening. Delivering quick operation and soft closing / opening features, with many other options available depending on the gate control requirements. Using the same AX24 control unit as other Somfy gate operators with proximity programming and the ability to install safety devices.
Dual cover protection increases comfort and security for the user:
– 1st cover accessible to the end user for manual unlocking.
– 2nd cover for use by the installer for access to the electrical connections.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: a single gate opens to allow pedestrians or cyclists to pass through.
Rapid opening to 90˚ in 15 seconds.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system and backup battery (optional) to operate the gate in the event of an electricity power cut.
Mechanical stops integrated within motor.
Adaptable to all installations, even the most difficult: traditional interioropening, exterior opening, opening on slopes, wide-angle opening or inreduced spaces.
Use with AX24 controller.†
‡ Requires the use of photocells.
* Per gate leaf.
† AX24 controller included in pack.
Axovia Multi Prons + Standard
Axovia Multi Prons + External Opening
Axovia Multi Prons + Sliding Arm
Axovia Multi Prons + Slope Opening
Max. Gate Weight (kg)
Max. Gate Weight (kg)
Max. Gate Weight (kg)
Max. Gate Weight (kg)
300 (@ 2.5m)*
100 (@ 2m)*
100 (@ 2m)*
100 (@ 2m)*
Ref.
Ref.
Ref.
Ref.
1216090 †
1216087 †
1216088 †
1216089 †
[ Gates: 17 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (VDC)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open to 90˚ (sec)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
Axovia
Mult
i Pro
ns +
Sta
ndard
Axovia
Mult
i Pro
ns +
Exte
rnal
Open
ing
Axovia
Mult
i Pro
ns +
Slidin
g A
rm
Axovia
Mult
i Pro
ns +
Slo
pe O
pen
ing
Axovia Multi Prons
TECHNICAL CHARACTERISTICS
Interior Opening up to 150˚
Opening on slopes (slope up to 20˚)
Exterior opening
* Per gate leaf
† A lock is recommended for use from 2m – 2.5m.
‡ A lock is compulsory for use from 1.2m – 2m.
230
24
130
300*
2.5*†
40
15
32
AX24
14.5
36,500
IP54
230
24
130
100*
2*
40
15
32
AX24
14.5
36,500
IP54
230
24
130
100*
2*‡
40
15
32
AX24
14.5
36,500
IP54
230
24
130
100*
2*
40
15
32
AX24
14.5
36,500
IP54
NOTE
See Controls section for remote operators / accessories.
[ Gates: 18 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Axovia 220Ans
MAIN CHARACTERISTICS & FEATURES
24V DC SWINGING GATE MOTOR
To preserve the natural opening operation of a swinging gate the Axovia 220Ans uses an arm operation made from a durable reinforced aluminium arm. Delivering a quick opening with enhanced speed and soft closing / opening features, with many other options available depending on the gate control requirements. The Integrated Control unit features proximity programming and the ability to install safety devices.
Dual cover protection increases comfort and security for the user:
– 1st cover accessible to the end user for manual unlocking.
– 2nd cover for use by the installer for access to the electrical connections.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: a single gate opens to allow pedestrians or cyclists to pass through.
Rapid opening to 90˚ in 10 seconds.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system and backup battery (optional) for operatingthe gate in the event of an electricity power cut.
Integrated control board.
‡ Requires the use of photocells.
* Per gate leaf.
Axovia 220Ans Max. Gate Weight (kg) 200 (@ 2m)* Ref. 1216080
[ Gates: 19 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (VDC)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open to 90˚ (sec)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24
600
200*
2*
20
10
16
INTEGRATED
10
36,500
IP55
Axovia
220A
ns
Axovia 220Ans
TECHNICAL CHARACTERISTICS
* Per gate leaf
NOTE
See Controls section for remote operators / accessories.
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
Antenna
Key switchor keypad
Stop
Stop
Axovia 220Ans
[ Gates: 20 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Axovia 180Bns
MAIN CHARACTERISTICS & FEATURES
24V DC UNDERGROUND SWINGING GATE MOTOR
To retain the aesthetics of a gate and to be almost completely hidden, the Axovia 180Bns is the perfect solution. Suitable for all types of gates (timber, metal, PVC, etc.), the Axovia 180Bns is recommended for difficult mounting situations. Due to its compact size, it can be mounted if a narrow post is the only option or a small opening space is available. Flexible when installing, the motor can be mounted under the gate or offset from its centre line.
3 operating modes:
- Semi-automatic: opening and closing using a remote control.
- Automatic: opening using a remote control and automatic closing once a car has passed through.‡
- Pedestrian: partial opening of gates to allow pedestrians or cyclists to pass through.
Rapid opening within 20 seconds for a 3m gate.
180˚ max opening.
Soft start / soft stop operation in order to protect the gate structure.
Easy manual unlocking system and backup battery (optional) for operating the gate in the event of an electricity power cut.
Use with AX24 controller.†
‡ Requires the use of photocells.
* Per gate leaf.
† AX24 controller included in pack
Axovia 180Bns Max. Gate Weight (kg) 150 (@ 1.8m)* Ref. 1216079 †
[ Gates: 21 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
Normal functioning temperature: -20°C to +60°C
Rated Controller Voltage (VAC)
Rated Motor Voltage (VDC)
Motor Power Consumption (W)
Max Gate Weight (Kg)
Max Gate Width (M)
Cycles per Day
Length of time to open to 90˚ (sec)
Max Remotes
Electronic Controller
Motor Weight (Kg)
Cycle Tested
Index Protection
Approval
230
24
60
200*
1.8*
20
20
32
AX24
10.5
36,500
IP68
Axovia
180B
ns
Axovia 180Bns
TECHNICAL CHARACTERISTICS
* Per gate leaf
NOTE
See Controls section for remote operators / accessories.
Antenna
Key switchor keypad
Stop
Axovia 180Bns
Stop
AX24ns
Control System
The diagram indicates the accessories recommended for the installation of a motorisation system. Other accessories available.
[ Gates: 22 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
RTS TRANSMITTERS
FOR GATE OPENERS
*Compatible with existing RTS range of Motors & Receivers (limited functionality)
†Transmission range differs on these products, take note!
NOTE: Replacement batteries for:
- Wall Mounted RTS Control Unit, Keytis 2, Keytis 4 and Keygo.
3V Type CR2430 (Somfy Part # 9014943).
- RTS Keypad 3V Type CR2450 (Somfy Part # 9014944).
Ref. 1841027
WALL MOUNTED RTS CONTROL UNIT
Two channel radio remote, wall mounted. Allows
for the individual or group control of RTS Gate
Opener products. Somfy Rolling Code. Up to 30m†
range in an open area.
Frequency: 433.42MHz.
IP54.
Supplied with wall mount & screws.
Dimensions: 105 x 75 x 25mm.
*Range Compatible
Ref. 1841030
RTS KEYPAD
Two channel radio keypad with security function
4, 5 or 6 digit programmable code. Allows for the
individual or group control of RTS Gate Opener
products. Somfy Rolling Code. Up to 30m† range in
an open area.
Frequency: 433.42MHz.
IP54.
Supplied with wall mount & screws.
Dimensions: 105 x 75 x 25mm.
*Range Compatible
Ref. 1841026
KEYTIS NS2 RTS
Two channel radio remote, slim keyring size. Allows
for the individual and / or group control of RTS Gate
Opener products. Somfy Rolling Code. Up to 30m†
range in an open area.
Frequency: 433.42MHz.
IP40.
Supplied with coloured clips.
Dimensions: 69 x 41.5 x 13.7mm.
*Range Compatible
Ref. 1841025
KEYTIS NS4 RTS
Four channel radio remote with security function,
slim keyring size. Allows for the individual and / or
group control of RTS Gate Opener products. Somfy
Rolling Code. Up to 30m† range in an open area.
Frequency: 433.42MHz.
IP40.
Supplied with coloured clips.
Dimensions: 84 x 43 x 16mm.
*Range Compatible
Ref. 1841064
KEYGO 4 RTS
Four channel radio remote, slim keyring size. Allows
for the individual and / or group control of RTS Gate
Opener products. Somfy Rolling Code. Up to 30m†
range in an open area.
Frequency: 433.42MHz.
IP30.
Supplied with coloured buttons.
Dimensions: 35.5 x 61 x 14mm.
*Range Compatible
[ Gates: 23 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
ELECTRONIC ACCESSORIES
FOR GATE OPENERS
Ref. 2400581
WIRED KEYPAD
Wired keypad for Gate Openers, used to ensure
secure entry. Can control up to two gate
applications by entering a PIN code. Illuminated
keys with audible beep.
50 codes per gate application.
IP65.
Supplied with wall mount & screws.
Dimensions: 110 x 96 x 16mm.
Ref. 2400552
INTERCOM
An intercom for identifying a visitor without having
to leave the home. Handset, controller and outside
intercom unit included.
Outdoor Station: IP54.
Outdoor Station Dimensions: 150 x 110 x 58mm.
Phone Dimensions: 223 x 64 x 50mm.
Ref. 9011073
ELECTRIC LOCK
24v Electric cylinder lock for use on applications
that require an extra security device.
Comes with 3 keys.
IP44.
Dimensions: 80 x 250 x 80mm.
Ref. 1841028
KEY SWITCH
Wired key switch for Gate Openers to open
the installation fully or for Pedestrian access.
IP54.
Dimensions: 105 x 75 x 25mm.
Ref. 9012763
PHOTOCELLS
Surface mounted on each gate post, an infra-red
beam is sent from the transmitter to the receiver
cell. Two sets can be used for safety on either side
of the gate.
IP54.
Maximum distance between cells: 10m.
Dimensions per cell: 105 x 75 x 38mm.
Ref. 9001002
ANTENNA
Used to enhance the reception of radio commands
or increase the transmission range of gate openers.
Cable Length: 8m.
Cable length cannot be modifi ed.
Dimensions: 202 x 30 x 30mm.
Ref. 9011074
ELECTRIC LOCK PLATE
Floor mounted locking plate for 9011073.
Dimensions: 30 x 110 x 50mm
[ Gates: 24 ]
© c
opyr
igh
t SO
MFY
Pty
. Li
mit
ed
ACCESSORIES
FOR GATE OPENERS
Ref. 9001001
BATTERY FOR AXOVIA
The back-up battery enables the gate to be
operated in the event of power loss. When fully
charged the battery can provide 10 cycles
(opening / closing) over 24 hours.
Voltage: 9.6V.
Capacity: 750mAh.
Charging time: 48 hrs.
Dimensions: 97 x 57 x 15mm.
Ref. 2400486
END STOPS
Used to ensure a perfect operation every time. Using
the End Stops the motor will automatically memorise
the stopping position.
Use with: Axovia 220Ans / Axovia.
180Bns / Axovia 400Cns.
Dimensions: 110 x 100 x 95mm.
Ref. 2400485
FIX BRACKET FOR AXOVIA 220Ans
Accessory for mounting an Axovia 220Ans to
an uneven surface. Used to provide a fl at level
surface to simplify installation.
Plate Dimensions: 250 x 148 x 5mm.
Ref. 9014612
BATTERY FOR ELIXO
The back-up battery enables the gate to be operated
in the event of power loss. When fully charged the
battery can provide 20 cycles (opening / closing) over
24 hours.
Voltage: 27.2V.
Capacity: 1.2Ah.
Charging time: 14 hrs.
Only suitable for Elixo 24V with FX24 Controller.
Ref. 9014611
BATTERY FOR IXENGO
The back-up battery enables the gate to be operated
in the event of power loss. When fully charged the
battery can provide 20 cycles (opening / closing) over
24 hours.
Voltage: 27.2V.
Capacity: 1.2Ah.
Charging time: 14 hrs.
Only suitable for Ixengo 24V with FX24 Controller.
Ref. 2400484
CABLE DUCTING
Used when trenching between two motors is not
possible or practical. The ducting will protect the
cable(s) from any potential damage caused by cars
driving over it.
Dimensions: 4m l x 82mm w x 15mm h
Cable Allocation: 1 cable 12mm diameter or
2 cables 9mm diameter.
Ref. 9011090
1M NYLON REINFORCED RACK TOP FIX
Rack for Axovia 400Cns or Elixo 500. Steel
Reinforced top fastening nylon rack, supplied
in 1m lengths, the track fi ts together quickly
ensuring rigidity and quiet operation.
Material: Nylon with Steel.
Reinforced bar.
Ref. 9011089
1M NYLON REINFORCED RACK BOTTOM FIX
Rack for Axovia 400Cns or Elixo 500. Steel
Reinforced bottom fastening nylon rack, supplied
in 1m lengths, the track fi ts together quickly
ensuring rigidity and quiet operation.
Material: Nylon with Steel.
Reinforced bar.