GAMMASTONE MILAN OFFICE GAMMASTONE UK ...TECH GY GAMMASTONE HEADQUARTERS Via Flaminia, 148 00068...
2
Monolithic 90° Monolithic >90° Monolithic <90° Quirk Miter Butt Joint Quirk Assembled Butt Joint Miter Corner Light 4200 mm 1200 mm 1600 mm GammaStone AIR panels have passed the two most severe international tests required by the strict American (NFPA 285) and English (BS8414-1) standards in the event of a fire. on the facades of buildings. The BS8414-1 test is by far the most severe in the world made on panels installed on a concrete structure using the aluminum anchoring system of the ventilated facades. This test is considered critical for the use of building materials in the UK, Middle East, Australia and New Zealand. GAMMASTONE AIR HAS SUCCESSFULLY PASSED THE FIRE TEST TEST NUMBERS BS 8414-1 NFPA 285 B S 8 4 1 4-1 & N F P A 2 8 5 T E S T I N G O N E X T E R I O R N O N - L O A D - B E A R I N G W A L L A S S E M B L Y CO N TI N IN G G A M M A S T O N E N A T U R A L A I R C O M P O S IT E P A N E L • PASSED F I R E P E R F O R M A N C E AIR TECH NOLO GY GAMMASTONE HEADQUARTERS Via Flaminia, 148 00068 Rignano Flaminio (Roma) Italy Tel.: +39 0761 5051 Fax: +39 0761 508388 [email protected] GAMMASTONE MILAN OFFICE Tel.: +39 02 39198813 [email protected] GAMMASTONE UK Ph. +44 203 9667769 [email protected] GAMMASTONE SPAIN Ph. +34 93 2712434 [email protected] GAMMASTONE USA Ph. +1 866 87 42662 [email protected] www.gammastone.com GAMMASTONE AIR TECHNOLOGY GammaStone produces extremely lightweight panels in natural stone, porcelain, glass, GFRC Plus, mosaic, and brick in large- format sizes up-to 4200 x 1500 mm. The use of aerospace technology and state-of-the-art manufacturing equipment enables GammaStone AIR panels to be highly resistant to impact, bending and compression. Backed by rigorous testing in the United States and abroad, GammaStone AIR panels meet the highest building performance standards. The GammaStone AIR systems, simultaneously open design possibilities while empowering the designer to confidently specify large-format panels. GammaStone AIR is protected by (Patent No. RM2013A000068) BONDED AT 10.000 kg/sqm (2048 lb/sqft) PRESSURE Gres / Natural / Glass / Gfrc Plus / Mosaic / Brick Structural Core Fibreglass Fibreglass Stainless Steel The GammaStone AIR system enables designers to choose large format, lightweight panels with confidence. The panels are anchored mechanically either with concealed or visible fasteners, allowing for simple attachment to substrate. The GammaStone AIR system provides a high level flexibility. Panels can be cut at complex angles, joined with structural epoxy adhesives and reinforced with metal angle, forming a single monolithic architectural element able to meet the most challenging functional requirements of the building. These unique panels allow the manufacturing of false beams or columns with complex and irregular shapes that can bring new vitality to the façades of new or exisiting buildings. These items are manufactured entirely in our factory and delivered ready for installation on site. GammaStone monolithic corners can be produced with nearly invisible joints, in angles and shapes of varying complexity to meet the demands of today’s modern architectural designs. The company’s years of experience with natural stone along with their state-of-the-art manufacturing facility, produces corners of unmatched precision and beauty. GammaStone, an Italian company, delivers elegance and unmatched craftsmanship to each project, merging the cutting edge of technology together with old world craftsmanship. From the simplest to the most complex, each component is fabricated to the highest level of quality. ARCHITECTURAL MONOLITHIC ELEMENTS State-of-the-art solutions CORNER TYPES Edges in various angles Large format up to 4200x1500 mm Impact Resistant Bending Resistant á VENTILATED FAÇADES á CURTAIN WALL á COATING
Transcript of GAMMASTONE MILAN OFFICE GAMMASTONE UK ...TECH GY GAMMASTONE HEADQUARTERS Via Flaminia, 148 00068...
Monolithic 90° Monolithic >90°
Monolithic <90°
Quirk Miter
Butt JointQuirk Assembled
Butt JointMiter
Corner Light
4200
mm
1200 mm
1600 mm
GammaStone AIR panels have passed the two most severe international tests required by the strict American (NFPA 285) and English (BS8414-1) standards in the event of a fire. on the facades of buildings. The BS8414-1 test is by far the most severe in the world made on panels installed on a concrete structure using the aluminum anchoring system of the ventilated facades. This test is considered critical for the use of building materials in the UK, Middle East, Australia and New Zealand.
GAMMASTONE AIRHAS SUCCESSFULLYPASSED THE FIRE TEST
TEST NUMBERS
BS 8414-1NFPA 285
BS 8414-1 & NFPA 285 TESTING ON EXTERIOR NON-LOAD-BEARING WALL ASSEMBLY CONTINING GAMMAS
TONE
NAT
URAL
AIR
COM
POSIT
E PANEL •
PASSEDFI
RE
PERFORMANC
E
AIR TECH NOLO GY
GAMMASTONE HEADQUARTERSVia Flaminia, 14800068 Rignano Flaminio (Roma) ItalyTel.: +39 0761 5051 Fax: +39 0761 [email protected]
GAMMASTONEMILAN OFFICETel.: +39 02 [email protected]
GAMMASTONE UKPh. +44 203 [email protected]
GAMMASTONE SPAINPh. +34 93 [email protected]
GAMMASTONE USAPh. +1 866 87 [email protected]
www.gammastone.com
GAMMASTONE AIR TECHNOLOGYGammaStone produces extremely lightweight panels in natural stone, porcelain, glass, GFRC Plus, mosaic, and brick in large-format sizes up-to 4200 x 1500 mm. The use of aerospace technology and state-of-the-art manufacturing equipment enables GammaStone AIR panels to be highly resistant to impact, bending and compression. Backed by rigorous testing in the United States and abroad, GammaStone AIR panels meet the highest building performance standards. The GammaStone AIR systems, simultaneously open design possibilities while empowering the designer to confidently specify large-format panels. GammaStone AIR is protected by (Patent No. RM2013A000068)
BONDED AT 10.000 kg/sqm (2048 lb/sqft) PRESSURE
Gres / Natural / G
lass /
Gfrc Plus / Mosaic / B
rick
Structural CoreFibreglass
Fibreglass
Stainless Steel
The GammaStone AIR system enables designers to choose large format, lightweight panels with confidence. The panels are anchored mechanically either with concealed or visible fasteners, allowing for simple attachment to substrate. The GammaStone AIR system provides a high level flexibility. Panels can be cut at complex angles, joined with structural epoxy adhesives and reinforced with metal angle, forming a single monolithic architectural element able to meet the most challenging functional requirements of the building. These unique panels allow the manufacturing of false beams or columns with complex and irregular shapes that can bring new vitality to the façades of new or exisiting buildings. These items are manufactured entirely in our factory and delivered ready for installation on site.
GammaStone monolithic corners can be produced with nearly invisible joints, in angles and shapes of varying complexity to meet the demands of today’s modern architectural designs. The company’s years of experience with natural stone along with their state-of-the-art manufacturing facility, produces corners of unmatched precision and beauty. GammaStone, an Italian company, delivers elegance and unmatched craftsmanship to each project, merging the cutting edge of technology together with old world craftsmanship. From the simplest to the most complex, each component is fabricated to the highest level of quality.
ARCHITECTURALMONOLITHIC ELEMENTSState-of-the-art solutions
CORNER TYPESEdges in various angles
Large format up to4200x1500 mm
Impact Resistant
BendingResistant
á VENTILATED FAÇADES á CURTAIN WALL á COATING
MAX PANEL SIZES TOTAL PANEL THICKNESS
CONCRETE THICKNESS
PANEL WEIGHT
3200x1500 mm (4,800 m²)125,98”x59,06” (51,67 ft²)
17 mm ≈ 11/16”
5 mm≈ 3/16”
18 kg/m²3.7 lb/sqft
MAX PANEL SIZES TOTAL PANEL THICKNESS
MOSAIC THICKNESS
PANEL WEIGHT
2914x970 mm (2,826 m²)114”x38,19”(30,42 ft2)
16 mm≈ 5/8”
4 mm≈ 3/16”
16 kg/m²3.3 lb/sqft
MAX PANEL SIZES TOTAL PANEL THICKNESS
CERAMIC THICKNESS
PANEL WEIGHT
3200x1600 mm (5,120 m²)126”x 63” (55,11 ft²)
18 mm ≈ 11/16”
6 mm≈1/4”
21 kg/m²4.3 lb/sqft
3075x1540 mm (4,735 m²)121,06”x 60,63” (50,97 ft²)
18 mm ≈ 11/16”
6 mm≈1/4”
21 kg/m²4.3 lb/sqft
3075x1040 mm (3,198 m²)121,06”x 40,94” (34,42 ft²)
17 mm ≈ 11/16”
5 mm≈ 3/16”
19 kg/m² 3.9 lb/sqft
3075x1040 mm (3,198 m²)121,06”x 40,94” (34,42 ft²)
15 mm ≈ 9/16”
3 mm≈ 1/8”
14 kg/m²2.86 lb/sqft
MAX PANEL SIZES TOTAL PANEL THICKNESS
BRICK THICKNESS
PANEL WEIGHT
3000x1000 mm (3,00 m²)118”x 39” (32 ft²)
19 mm≈ 3/4”
7 mm≈ 1/4”
17 kg/m²3.5 lb/sqft
3000x1000 mm (3,00 m²)118”x 39” (32 ft²)
18÷23 mm≈ 11/16”÷≈ 7/8”
6÷11 mm≈ 1/4”÷≈ 7/16”
27÷30 kg/m²5.5÷6.1 lb/sqft
3000x1000 mm (3,00 m²)118”x 39” (32 ft²)
27 mm≈ 1 1/16”
15 mm≈ 9/16”
22 kg/m²4.5 lb/sqft
3000x1000 mm (3,00 m²)118”x 39” (32 ft²)
32 mm≈ 1 1/14”
20 mm≈ 3/4”
22 kg/m²4.5 lb/sqft
MAX PANEL SIZES TOTAL PANEL THICKNESS
STONETHICKNESS
PANEL WEIGHT
3200x1500 mm (4,800 m²)126”x 59” (52,42 ft²)
17 mm ≈ 11/16”
5 mm≈ 3/16”
18 kg/m²3.7 lb/sqft
3200x1500 mm (4,800 m²)126”x 59” (52,42 ft²)
18 mm ≈ 11/16”
6 mm≈1/4”
25 kg/m²5.5 lb/sqft
3200x1500 mm (4,800 m²)126”x 59” (52,42 ft²)
24 mm≈ 15/16”
12 mm≈ 1/2”
36 kg/m²7.4 lb/sqft
MAX PANEL SIZES TOTAL PANEL THICKNESS
GLASSTHICKNESS
PANEL WEIGHT
4200x1500 mm (6,300 m²)165,35”x59,06” (67,81 ft²)
18 mm≈ 11/16”
6 mm≈ 1/4”
21 kg/m²4.3 lb/sqft
3200x1500 mm (4,800 m²)128,98”x59,06” (51,67 ft²)
16 mm≈ 5/8”
4 mm≈ 3/16”
16 kg/mq3.3 lb/sqft
Go to www.gammastone.com Go to www.gammastone.com Go to www.gammastone.com Go to www.gammastone.com Go to www.gammastone.comGo to www.gammastone.com
3000
x100
011
8”x3
9”
3000
x150
011
8”x5
9”32
00x1
600
126”
x63”
3200
x150
012
6”x5
9”
4200
x150
016
5”x5
9”32
00x1
500
126”
x59”
3200
x150
012
6”x5
9”
“zip” solutionSolution without “zip”
3000
x100
011
8”x3
9”
3000
x100
011
8”x3
9”
3000
x100
011
8”x3
9”
80%RECYCLED
MATERIALS
Ordinary cement BIO ACTIVE
Initial fluidity 100 mm > 300 mm
Compressive strength 30 MPa > 60 MPa
Flexural strength 5 MPa > 10 MPa
CLOSED JOINTSOLUTION
3000
x100
011
8”x3
9”
GammaStone with it’s AIR technology is able to adapt quickly to the ever changing needs and trends of the architectural design sector. Along with their commitment to quality and reliability, this versatility has contributed to GammaStone’s ever growing presence as a premier façade manufacturer. As GammaStone continues to be featured on more high profile projects around the world, we remain committed to the core philosophies that have made GammaStone a world leader.
PROJECTS AROUND THE WORLD
GRES AIR porcelain gres panels available in large-format sizes up to 3200x1500mm. These ultra-thin, state-of-the-art panels allow simple mechanical installation of 3/16 mm thick ceramic slabs.
NATURAL AIR large-format, marble, granite, limestone or travertine panels are used to create beams, columns and other monolithic architectural elements. Panels are mechanically in-stalled and range in sizes up to 3200 x 1500mm.
GLASS AIR lightweight, back-laquered glass panels are me-chanically fastened and extremely resistant to breakage from shock. Panels available in large-format sizes up to 4200 x 1500mm.
GLASS AIRGRES AIR NATURAL AIR GFRC PLUS AIRGFRC PLUS AIR panels are constructed of an ultra-thin, high-performance concrete slab, on a fiber-glass structural core backed by a .5 mm stainless steel plate. The bio-dynamic concrete in these panels reduces maintenance and increases durability.
MOSAIC AIR BRICK AIRMOSAIC AIR panels allow fast, mechanical installation of ce-ramic or glass mosaic. Panels come pre-grouted with epoxy resin mosaic joints and ready for installation. Joints between panels are designed to continue the mosaic effect through the entire façade.
BRICK AIR solution enables fast, dry installation of Klinker or porcelain bricks. The panels are delivered with pointed brick joints and ready for installation. Panels joints are designed to create a uniform effect on the entire façade.
GAMMASTONE AIR SYSTEM IS IDEALFOR ALL INTERIOR AND EXTERIOR FACADES.
