T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 1

Funnels and Measures Model 719

Model 757

Model 764

Model 799

4-Quart Galvanized Measure with flexible spout.

5-Quart Polyethylene Measure with flexible spout.

Heavy-Duty Polyethylene Funnel designed for

diesel fuel. Special screen separates most of the

water droplets from the fuel. 10 inches X 7 inches

at top.

E-Z Smart funnel

Features:

2 Gallon Capacity

Funnel design protects against overfilling the drum.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 2

Funnels and Measures Model 745

Model 770

1803

5-Quart Flow Control measure with flexible metal spout.

Deluxe Flexible Plastic Funnel. 11” flexible hose with

wide neck for rapid filling. For use in hard-to-reach

places.

Galvanized speed funnel. Accepts almost all liquids except for strong acids. Large 1 1/2" outlet with an anti-swirl fin. Leak proof galvanized steel construction.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 3

Barrel Faucets

Model 68

Model 67

Model 81

Plastic Bung Faucet for ¾” NPT bung

opening.

Plastic Bung Faucet for 2” NPT bung opening.

Barrel Faucet - Die-cast metal bung faucet for ¾” NPT bung opening in steel drums or barrels. Self-closing. Has hole for padlock (padlock Not furnished).

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 4

Suction Wand Stingers

Custom designed aluminum hand held suction wands.

Used for evacuating sumps and pits of liquid and industrial

waste materials. Available in 1” through 4” in custom

lengths and configurations. Available with or without

handles. See ordering information below.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 5

Fittings and Flanges

Schedule 40 and 80 NPT pipe fittings. Available in all sizes black,

galvanized, stainless steel, brass, and aluminum

.

Pipe available in stock lengths. Available in

black, galvanized, stainless steel, and

aluminum. In all sizes.

Flanges available in blind threaded and slip on

configurations. Available in all sizes. Also in steel, cast

iron, aluminum, stainless steel, and PVC materials. In

150 lb., 300 lb., and T.T.M.A. patterns.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 6

Hydraulic and Pneumatic Fittings

Quick Disconnects

Pneumatic Quick Disconnects

37° JIC hydraulic fittings. Available in all sizes.

Available in steel.

Available in ¼”-1” sizes. Available in steel, brass, and

stainless steel. In a variety of pressure ratings.

Available in ¼”- ½” in steel, brass, and stainless steel.

In Industrial, Aro, and Lincoln mating configurations.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 7

Pressure Regulators, Filters, and Lubricators Mini Pressure Regulator

Combination Pressure Regulator

Water Pressure Regulators

Mini pressure regulator, filter, and gauge.

Available in 1/8” and ¼”.

Combination pressure regulator, filter, and

lubricator. Available in ¼”- 1 ½”.

Balanced valve minimizes effects of the inlet

pressure variations on outlet pressure. Body,

valve, and bottom plug are brass. Bonnet is

aluminum and steel. Elastomers are nitrile.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 8

Cinch Straps

Static Grounding Strap

Static Grounding Reel

Velcro straps. Available in various sizes.

Static drag straps are used behind

trucks, tow motors, or any vehicle to

dissipate static. 1” and 2” widths

available. Standard lengths are 18”, 20”,

22”, 24”, and 25”.

Static ground reel used in vehicles or in plant for

drumming purposes or whenever a static

condition may cause volatility. Available in a

variety of lengths.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 9

Clamps Punch Lok Clamps and tools

Worm Gear Clamp

T Bolt-Style Clamp

Double Bolt Clamps

High strength galvanized carbon steel hose

clamps will satisfy nearly any performance

requirements. Stainless steel hose clamps are

for use with more corrosive liquids and

materials like acids. Available in a variety of

sizes.

Available from 7/16” through 20” in steel and stainless

steel construction.

Available from 2”-17” in stainless steel

construction.

Available in 3 ½”-17 ½“ in plated

iron.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 10

Thread Sealants

Soft Set Thread Sealant with PTFE

Gasoila-100 Soft Set Thread Sealant for Corrosive Chemicals

Gasoila E-Seal Thread Sealant Soft Set with PTFE

Soft-setting, non-toxic, PTFE paste. Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, oil burners, hydraulics, compressors, engines, motors, housings, plugs, fuel lines, couplings and more. Use on brass, copper, stainless steel, aluminum, black pipe, tin, galvanized, ABS, CPVC, PVC plastics, nylon, polyethylene, polypropylene, polybutylene and more. Excellent resistance to gasoline (up to 20% alcohol and petroleum blends), petroleum solvents, kerosene, diesel oil, propane, butane LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more. NOT for use on oxygen. Remains pliable in cold temperatures. Temperature Range: -100ºF to 600ºF (-74ºC to 318ºC). Pressure Range: To 10,000 psi sealing liquids; to 3,000 psi sealing gases. One year shelf life when stored at 40ºF to 80ºF (5ºC to 27ºC). For alcohol blended gasoline (ethanol). For use on NPT Threads.

Soft-setting, black sealant works where conventional thread sealants fail. Excellent performance with systems handling 100% methanol, ethanol, alcohol and ideal for concentrated or dilute acids and caustic alkali, compressed air, aromatic solvents, glycol/water solutions, coal tar, naphtha, cutting oils, ethylene glycol and ketones. NOT for use on ethanol blended gasoline. (Less than 100% ethanol). NOT for use on plastic pipe or oxygen. Use on thoroughly clean, dry threads. Temperature Range: -50ºF to 450ºF (-46ºC to 234ºC). Pressure Range: To 5,000 psi for gases; to 10,000 psi for liquids. One year shelf life when stored at 40ºF to 80ºF (5ºC to 27ºC). For use on NPT Threads.

Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications - use Gasoila 100). Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings. For use on brass, copper, stainless steel, aluminum, black pipe, tin and galvanized pipe. Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, Biodiesel propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids and steam. NOT for use on oxygen. Temperature Range: -100ºF to 600ºF (-74ºC to 318ºC). Pressure Range: Up to 10,000 psi when sealing liquids and up to 3,000 psi with gases. UL Classified. For use on NPT Threads.

T o m l i n C o r p o r a t i o n P h . 2 1 6 - 6 4 1 - 1 8 0 0 F a x . 2 1 6 - 6 4 1 - 5 2 5 0

Page 11

Lid Pullers

Bag-O-Rags

Gaskets and O-Rings

Available in 25-½” and 35” lengths. Made in USA with

domestic steel.

Reclaimed T-Shirt rag material

Various mixed colors

Approximately 80 rags per bag

Slices across the top for easy dispensing

100% cotton

10 lb. bag

We offer a variety of hose gaskets,

flange gaskets, and o-rings for the

petroleum , chemical, and dry bulk

industry. Available in all sizes and a

variety of materials. Please call with your

specific needs.