2010

•All Smart Vision Lights products feature a Built In Driver!

NPN & PNP strobe trigger, 0-10VDC remote analog intensity control, external potentiometer for manual intensity control, green powerindicator led, and a yellow strobe indicator led.

•All Smart Vision Lights products utilize the same M12-5pin cable.

•All Smart Vision Lights operate on 24DVC•Smart Vision Lights uses only high bright LEDs.

* Single 5 watt LED* 30mm Barrel Style Housing* Continuous operation or Strobe mode* Dimmable via built in potentiometer* Analog intensity via 0-10VDC signal* Standard optics provide tight focused light* Available in wash down, remote head, or fiber bundle attachment

Mounting Options

*6 High Current LED’s*Driver built in – No External wiring to a driver*PNP and NPN Strobe input*Continuous operation or Strobe mode*Dimmable via built in potentiometer*Analog intensity via 0-10VDC signal*Standard optics provide tight focused light*Available in Wash Down, OverDrive, and Back Light configuration

*12 High Current LED’s*Built-In Driver*PNP and NPN Strobe input*Continuous operation or Strobe mode*Dimmable via built in potentiometer*Analog intensity via 0-10VDC signal*Option to connect lights together *Available in Wash Down and OverDrive

* Highest Power LED Lights available in the Vision Industry* SafeStrobe Technology ensures protected operation of LED’s* 4 to 10 times brighter than standard high current LED Lights* Precise current provides stable Light Intensity* High Speed >> Fast Response 220 strobes per secon d* Connect-a-Light® technology* NPN and PNP strobe control

OverDrive™ offers our SafeStrobe Technology.

This unique technology applies safe working parameters to ensure the LED’s are not damaged by driving them beyond their limits. This is especially beneficial for overdriving today’s new High Current LED’s. The OverDrive™ series provides repeatable intensity control and pulsing by using a microprocessor to watch and control the power to the LED’s for safe operation. The integrated OverDrive™controller offers both NPN and PNP strobe input for easy integration to today’s smart cameras. Lights have high speed reaction times that offer extremely fastrepeatable pulse times.

A Strobe or Pulse reduces Heat. No heat build up in the LED. Heat in an LED reduces the intensity or output. LED’s can produce more light when they are driven at higher currents but only for a short duration. Smart Cameras and Machine Vision Cameras have a low duty cycle for image acquisition vs. product inspection. A low duty cycle creates a perfect opportunity to over drive LED’s with a short burst or pulse then have a long rest time

Why Strobe for machine vision?

*Ring Light mounts to directly to all models of CCTV lenses*Adapter Rings for all lens sizes*Can also be mounted by T-Slot with T-nut*High Output LED’s housed in small industrial housing*Built in smart driver with NPN & PNP control*Intensity control by analog 0-10VDC or integrated pot

Standard Adapter Kit Adapter Kit includes 2 step up rings (25.5 and 27), 6 set screws and hex tool. 6 set screws – 3 for mounting step up ring to light and 3 additional for lens. Some locking thumbscrews may prevent the lens from fitting through the center of the R80, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed.

Step Up Adapter Kit

Step Up Adapter Kits includes step up rings, 6 set screws and hex tool.

Lenses can be mounted to front or back of ring light.

Step Down Adapter Kit

Step Down Adapter rings for mounting large Lenses to back of ring light.

SOBL seriesDriver built in – No External wiring to a driverContinuous operation or Strobe modeAnalog intensity via 0-10 VDC signalPNP and NPN Strobe input30mm Industrial Frame with 8mm T-SlotStandard M12 Industrial Connector

HOBL seriesPrecise Intensity by monitoring temperature of LED’sMicroprocessor regulation with status output signalDriver built in – No External wiring to a driverPNP and NPN Strobe inputContinuous operation or Strobe modeStandard industrial 30mm Aluminum Extrusion Frameprovides ease of mounting.

LLP-1594mm x 840mm active area LED Back Light

(23.4" x 33")

LLP-51075mm x 1535mm active area LED Back Light (42.3"

x 60.4")

LLP-4855mm x 1205mm active area LED Back

Light (34.8" x 47.4")

LLP-3775mm x 1075mm active area LED Back Light

(30.5" x 42.3")

LLP-2420mm x 594mm active area LED Back Light

(16.5" x 23.4")

LLP-6300mm x 300mm back light active area LED Back light (12”x12”)Red, IR, & White

Red WHI

IR

White OnlyWhite Only

The LLP-H series of LED lights is a diffuse ring light for use as a front light. A 65mm hole in the center makes the light a large ring that provides very diffuse even illumination. Provides diffuse illumination Similar to a dome light or light tent.

The DLPW IP68 light meets U.S. FDA compliancies for use in food & pharmaceutical applications. Housed in a fully sealed 316 stainless steel housing and all the same features as the DLP.

The DLP is a large, thin profile diffuse LED ring with M12 quick disconnect, built in driver with continuous or strobe mode. Also features analog intensity via 0-

10VDC signal and PNP/NPN strobe input

*Lights adjust 90 degrees – full vertical to horizontal swing*Large sizes for automated packaging lines300mm x 300mm and 600mm x 600mm*Lights can be strobed together or separate

•5 Watt LED •Highest Power LED Projector •Driver built in – No External wiring to a driver•PNP and NPN Strobe input•Continuous operation or Strobe mode•Dimmable via built in potentiometer

SP30 SeriesProjector Light

LED Pattern Projector

LED projector can provide thinner lines with sharper edges and more uniform illumination than lasers

Laser emitters have thicker lines with blurred edges, non-uniformity, speckling, and decay are present issues

Narrow (Standard on all lights except ring lights) – Standard lenses create a narrow beam of illumination.

Standard lenses can be used when long working distances are needed.

Wide – Wide lenses create a large area of illumination. Wide lenses can be used when short working distances are needed. Wide lensescreate a flood light effect.

Line -Line lenses create a thin narrow bream of illumination. Line lenses create a line of light when used on L300 linear lights.

Oval -Oval lenses create an elongated pattern of light.

*6 High Current LED’s – White, Red 625nm, Blue 470nm, Green 530nm, UV 395nm & IR 850nm

*Li-ion battery with integrated charger / Up to 2 hours of operation before recharging

*Recharges in 6 hours / Includes recharging power adapter

*Push button testing for LED on/off

*High Power, High Current LED’s

Inline variable control remote Potentiometer for controlling The intensity of all Smart Vision Lights.

Diffusers/Polarizers IVP-C1 Variable Control Potentiometer

Note: If you cross the wires it just will not work.

The circuited is protected.

www.smartvisionlights.com 23

*5 year warranty is valid for all lights excluding those with Ultra-Violet LEDs. In this case we offer a 2 year warranty.

Our 5 Year Limited Warranty Policy*

All Smart Vision Lights products are meticulously designed, assembled, and tested thoroughly before being shipped. Every Smart Vision Lights product is fully warranted for a period of 5 years from the date of purchase. We guarantee our lights to be free of defects in the assembly process and the materials included in the design of our product. In the unfortunate case that a problem should develop during the warranty period, please contact your distributor or Smart Vision Lights directly as soon as possible. The appropriate steps will then be taken to either repair or replace your product (at our option) at no charge. Smart Vision Lights will not assume responsibility for the misuse, obvious abuse, special, supplementary, consequential, or indirect damages of our products under this provision.

Coming Soon…

ODR80….ODR130….LX300….LX150

XR180

XR Series Strobe Light

High Speed Xenon LED Replacement

*Up to 5000 frames/strobes per second*Microprocessor regulation of current*High Output, High Speed Light*Replacement for Xenon Strobe*OverDrive - Strobe Only operation*SafeStrobe Technology ensures protected operation of LED’s*Internal Storage of Power Drive Energy*Up to 5000 SPS (Strobes Per Second)*20 microsecond to 8 millisecond settable strobe pulse*Requires 15 amps of average current at 24VDC

2010