Front Loading Oedometer Consolidation...
Transcript of Front Loading Oedometer Consolidation...
Front Loading Oedometer – Consolidation Apparatus
PRODUCT CODE:
STANDARDS: BS 1377:5; ASTM D2435, D3877, D4546; AASHTO T216;
CEN ISO/TS 17892-5
TS-0348
BRIEF DESCRIPTION
TS-0300 TS-0302 TS-0307 TS-0309 TS-0311 TS-0317 TS-0319 TS-0321 TS-0330 TS-0348 TGM-0120 TGM-0148 TGM-0152 TGM-0060 TGM-0078 TG-0320 TG-0325
Front Loading Oedometer (Consolidation) Bench for Consolidation, 3 Oedometer Capacity Consolidation Cell for High Pressure, Ø 50 mm Consolidation Cell for High Pressure ASTM Ø 63.5 mm (2.5”) Consolidation Cell for High Pressure BS/EN, Ø 75 mm Calibration disc for 50 mm dia. consolidation cell (TS-0307), stainless steel Calibration disc for 63,5 mm dia. consolidation cell (TS-0309), stainless steel Calibration disc for 75 mm dia. consolidation cell (TS-0311), stainless steel Software for Consolidation Set of Weight for Consolidation, 80 kg (6x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g) Analogue Dial Gauge, 30x0.01 mm Digital Dial Gauge 25x0.01 mm, LCD display, data output Digital Dial Gauge 12.7x0.001 mm, LCD display, data output Linear Potentiometric Displacement Transducer, 10x0,001mm High Accuracy Strain Gauge Based Displacement Transducer, 50 mm Static Unilogger, 4 Channel Data Acquisition Unit Static Unilogger, 8 Channel Data Acquisition Unit
The TS-0300 Front Loading Oedometer is rigidly constructed to ensure minimum
frame distortion.
The frame is designed to load the specimen through a lever arm assembly and
one of three alternative beam ratios as 9:1, 10:1 and 11:1
The beam is fitted with a counter balance weight and beam support jack.
is fitted with a central spigot to ensure accurate centring of the cell under the
loading.
The fixed ring consolidation cells are manufactured from corrosion-resistant
materials and conform to the requirements of the relevant standards.
An integral water reservoir is incorporated in the cell which allows the
specimen to be inundated when required. All cells are supplied complete with
upper and lower porous disc, pressure pad and cutting (specimen) ring.
The One-dimensional Consolidation test is used to determine the consolidation
characteristics of soils of low permeability.
Tests are carried out on specimens prepared from undisturbed samples. Data
obtained from these tests together with classification data and a knowledge
of the soils loading history, enables estimates to be made of the behaviour of
foundations under load.
ORDERING INFORMATION:
Consolidation cell, dial gauge or displacement transducer and data logger,
bench, weights and calibration disc should be ordered separately.
TS-0307 & TS-0311
Dimensions: 750x850x1400 mm ( 3pcs TS-0300 + TS-302+TS-0348 +Accessories Weight: 180 kg ( 3pcs TS-0300 + TS-302 + TS-0348 +Accessories
Data Acquisition: 4 or 8 channel static uniloggers (TG-0320 or TG-0325 ) are used to record displacement data over time. • High resolution : 260.000 points. • Ethernet port for PC and printer connection. • CPU card by microprocessor 32 bit ARM risk architecture.
• 4 or 8 channels for displacement transducers.
TG-0320
TG-0325
The cell platform will accept the complete range o f consolidation cells and