FRAGO IMPEX SDN BHD

of 52/52
FRAGO IMPEX SDN BHD 15-1, JALAN A, TAMAN BATU, OFF JALAN KUCHING,l52000 KUALA LUMPUR, MALAYSIA Tel: 603-6252 5637 Fax: 603-6253 3476 , URL: http:// www.fragoimpex.com Email: [email protected] SURGICAL, DENTAL, HOLLOWARE, HOSPITAL FURNITURE, SUCTION PUMPS & O.T. LIGHTS CATALOGUES BENZ STAINLESS
  • date post

    26-Jan-2022
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of FRAGO IMPEX SDN BHD

FRAGO IMPEX SDN BHD 15-1, JALAN A, TAMAN BATU, OFF JALAN KUCHING,l52000 KUALA LUMPUR, MALAYSIA
Tel: 603-6252 5637 Fax: 603-6253 3476 , URL: http://www.fragoimpex.com
Email: [email protected]
BENZ
STAINLESS
Electric ICU/CCU Bed Model FA8989
Features: .All parts made by tooling to ensure uniform quality .Head & Food board (Material:PE blow I single piece)easy detachable & removable and can clean easily .Embeded patient control side rail inside & Outside to allow patient to have own desired positions & Outside side rail with more Control Features for caregivers management .CPR one press button-go lowest and horizontal position .Dual sided manual override instant CPR release level for the backrest .Four high-quality 150mm diameter Tente Twinwheel with central locking system With steer,free and brake function .Patient ivate Technology mattress with memory foam to allow patient’s body contouring and reduce pressure cover of retardant,anti bacterial and fluid resistant. Dimension: Overall size:2200mmL X 1050mmW X 480mm-780mmH Mattress Size:1980mmL X 915mmW X 100mmH ELECTRIC SYSTEM:
-PatientMate Technology Mattress with memory foam With densities to allow patient’s body contouring and reduce Pressure,cover of fire retardant,anit bacterial and fluid resistant -X-ray radio translucent base from head to umlicius With cassette holder. -CPR one press button-go lowest and horizontal position
Linak DC-actuator system .24 DC output .Voltage:220-240,50Hz-60Hz .Built in backup Battery OPTIONAL ACCESSORIES. -Monkey Pole -Oxygen Cylender Holder -Portable Monitor/Defibrillator Tray
Model: FA9900-W ICU Bed with Weighing Scale
• FEATURES: • All parts are made by tooling to ensure uniform quality • Sheet metal mattress base for durability with X-ray translucent base for
the head to umbilicus section • X-ray cassette holder tray with adjustable film positioning on the
backrest section • Steel bed frame with epoxy polyester powder coated & baked finish is
resistant to chipping and scratching • PE Head & Foot boards with locking mechanism for easy attachment
detachment • Tente twin castors 150mm diameter central locking and steer system
with pedals located at the foot end for convenient operation • Split fold down PE blow safety side rail with convenient one hand
operation for engaging and disengaging side rail • Height, Backrest, Legrest and Trendelenburg and Reverse
Trendelenburg by electric motorize • Embedded dual sided controls on the head section side rails – full
function on the outer side for caregivers and limited function on the inner side to allow patient to have own desired position
• Auto contour function to reduce the chances of patient sliding to the foot end of bed when – to achieve the most ergonomic and comfortable ‘cardiac chair position’, while reducing the need to move patients to alternative seating
• Caregiver control (nurse lock and nurse control) located at foot end of the bed
• Nurse lock to lock out the individual articulation function of the side rail • CPR one press button – to return the bed to the lowest position for
height, backrest and legrest • Manual Quick CPR for lowering backrest release lever at both sides of
the bed • Digital weighing scale with segment LED display and control panel on
the foot board
• Zero scale function • 6 IV pole mounting and monkey pole mounting • IV drip pole storage • Drainage bag holder located on both sides of the bed • PU bumper at 4 corners
• Physical : • Backrest : 0° – 70° • Knee rest : 0° – 35° • Height : 480mm to 780mm (to bed pan level) • Trendelenburg & Reverse Trendelenburg : 15° • Overall size: 2200mmL x 1050mmW • Sleeping surface : 1980mmL x 915mmW • Safe load capacity : 230kg
• Electrical system : • Input Voltage: 220-240V; 50Hz-60Hz • LINAK DC-actuator system (TUV & UL approved & EC60601-1) • 24VDC with built in back-up battery • Safety rating
• controllers : IP54 • actuators : IP54 • nurse control : IP66 • Accessories included : • PatientMate Technology Mattress with Memory Foam - allowing
patient’s body contouring
• and reducing pressure, cover of fire retardant, anti bacterial and fluid resistant, thickness
• 100mm • Stainless Steel Telescopic IV Drip Pole with 2 hooks
• Optional Accessories: • Monkey Pole • Oxygen Cylinder Holder • Portable Monitor / Defibrillator Tray • Orthopedic Frame
HOMECARE ELECTRIC BED MODEL FA 7002-HC
Features: All parts are made by tooling to ensure uniform quality. • Steel base bed-tops & frame are made with epoxy powder coated & baked finish resistant to chipping and scratching. • Electric motorizes homecare bed with smooth and quite operation. • Detachable PE head / foot boards. • Four high-quality 125mm swivel with 2 brakes. Electric System: LINAK DC-actuator system (TUV & UL approved) Functions: Hilo, backrest & knee controlled by hand set • Backrest & knee rest are 0o - 80o & 0o – 45o respectively & adjustable simultaneously • Height adjustable: 360mm to 670mm • Mattress size: 1905mmL x 914mmWx102mmH • Overall size: 2110mmL x 970mmW Accessories: Extruded aluminum collapsible type guard rails (detachable) • Mediflex mattress: Fire retardant, water-proof PU foam Mattress
ELECTRICAL BED
The 2000 Series Electrical Bed created and designed Is truly a fusion of renowned Danish actuation technology, German castors development and Malaysia creativity in incorporating and synergising modern technologies. Designed not only for durability but also for maximum patient comfort and nursing staff’s flexibility in performing their duties. Frago Medical furniture and accessories always put the functions of the device as its first consideration, with a firm and progressive believe that product quality, customer service, maintenance and cost effectiveness as its foremost priority. The creation of style and ecological image come second
MODEL : FS 100-E-2000 SERIES ELECTRICAL HOSPITAL BED - 4 SECTION / DOUBLE FOWLER POSITION
4 SECTION ELECTICAL HOSPITAL HOSPITAL BED MODEL: FS 100-E-2000 SERIES
4 Section /Double Fowler Features :- − HI-LO Positions From 450mm To 800mm - Motorised
− Head Section Adjustable To 85° Inclination - Motorised − Foot Section Adjustable To 40° Inclination - Motorised − Hand Set - Remote Positions Control By Patient − Foot End Remote Control by Nursing Staff
− Bed Frame Mild Steel Contruction − Finishing Epoxy Powder Coated − Bed Surface: Formed ABS / Polymerised Material − Bed Head And Footend Panel :
Formed ABS / Polymerised Material Detachable & Interchangeable Standard Accessories:-
− Aluminium Side Rails (Fold Down Version) -FS 151-C − One Piece B.S.Latex Mattress c/w Sanitized PVC Zip Bag Cover - Model
FS 105-M-A − 3 Electromotor (220V-AC/DC)
Brand : LINAK / Denmark − Castors : 4x125mm Ball Bearing, Grey Rubber, Central Footend Control
For Static & Directional BrakingTENTE / Germany − Mattress Base Size : 1905mmL x 915mmW − Overall Size : 2150mmL x 1000mmW
FS 151-C Safety Side Rails - Footend Control - Aluminium : Collapsible / Fold-Down
Footend Remote Control
FS 105-M-A B.S. Latex Mattress c/w Sanitized, Water Repellant & Fire Retartant Vinyl PVC (Medicare ! Australia) Zip Bag Cover
MODEL: FS 100-A-1 4 SECTION / DOUBLE FOWLER POSITIONS • Hydraulic (GERMANY) Height Adjustable From 450mm To 800mm • Gas Spring (GERMANY) - Backrest Adjustment • Gas Spring (GERMANY) - Knee Bend Adjustment • Frame Tubular Mild Steel • Mattress Base : 1.2mm Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panel : Detachable And Interchangeable - Formed ABS / Polymerised Material • Castors : 4 x 125mm Ball Bearing, Non- Marking Grey Rubber, Diagonal 2 With Double Brakes - Static & Directional • Mattress Base : 1905mmL x 915mmW • Overall Size : 2140mmL x 1000mmW
Standard Accessories : • 1 Unit : Stainless Steel Double Hook IV Drip Pole - Height Adjustable With Receiving Sockets At Both Headend Corners • 4 Units : Revolving Non-Marking, Grey Rubber Bumper At 4 Corners Optional Accessories : • 1 Pair : Telescopic Safety Siderails - Model VS 151-B • 1 Pc. Hospital B.S.Latex Mattress c/w Sanitized Vinyl PVC Zip Cover - Model VS 105-M-A
MODEL: FS 100-B-1
2 SECTION I SINGLE FOWLER POSITIONS • Hydraulic (GERMANY) Height Adjustable From 450mm To 800mm • Gas Spring (GERMANY) - Backrest Adjustment • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panel : Detachable And Interchangeable - Formed ABS / Polymerised Material • Castors : 4 x 125mm Ball Bearing, Non- Marking Grey Rubber, Diagonal 2 With Double Brakes - Static & Directional • Mattress Base : 1905mmL x 915mmW • Overall Size : 2140mmL x 1000mmW
Standard Accessories : • 1 Unit : Stainless Steel Double Hook IV Drip Pole - Height Adjustable With Receiving Sockets At Both Headend Corners • 4 Units : Revolving Non-Marking, Grey Rubber Bumpers At 4 Corners Optional Accessories : • 1 Pair : Telescopic Safety Siderails - Model VS 151-B • 1 Pc. Hospital B.S.Latex Mattress c/w Sanitized Vinyl PVC Zip Cover - Model VS 105-M-A
MODEL: FS 100-A-2 4 SECTION / DOUBLE FOWLER POSITIONS • Mechanical Cranking Height Adjustment From 450mm To 800mm • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panel : Detachable And Interchangeable - Tubular Steel Frame With Laminated Fibreboard Panels • 3 Independent Cranking Mechanism For : - HI-LO Positions, Backrest Adjustment, Knee Bend Adjustment • Castors : 4 x 125mm Ball Bearing, Grey Rubber, Diagonal 2 With Double Brakes - Static & Directional • Mattress Base : 1905mmL x 915mmW • Overall Size : 2140mmL x 1000mmW
C/w : A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets At Both Headend Corners Optional Accessories : • 1 Pair Telescopic Safety Siderails - Model VS 151-B • 1 Pc. Hospital B.S. Latex Mattress c/w Sanitized PVC Zip Cover - Model VS 105-M-A
C/w : -A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets at Both Headend Corners. Optional Accessories : • 1 Pair : Telescopic Safety Siderai!s - Model VS 151-B • 1 Pc. Hospital B.S. Latex Mattress c/w Sanitized PVC Zip Cover - Model VS 105-M-A
MODEL: FS 100-B-2 2 SECTION / SINGLE FOWLER POSITIONS • Mechanical Cranking Height Adjustment From 450mm To 800mm • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panel : Detachable And Interchangeable - Tubular Steel Frame With Laminated Fibreboard Panels • 2 Independent Cranking Mechanism For : - HI-LO Positions & Backrest Adjustment • Castors : 4 x 125mm Ball Bearing, Grey Rubber, Diagonal 2 With Double Brakes - Static & Directional • Mattress Base : 1905mmL x 915mmW • Overall Size : 2140mmL x 1000mmW
MODEL: FS 100-C-1 4 SECTION / DOUBLE FOWLER POSITIONS • Fixed Height - 550mm • Gas Spring Assisted Backrest And Kneebend Positions Adjustment • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panels : Detachable And Interchangeable Tubular Steel Frame With Laminated Fibreboard Panels • Castors : 4 x 100mm Grey Rubber Diagonal 2 With Brakes • Mattress Base : 1905mmL x 915mmW C/w : A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets Headend Corners Optional Accessories : • 1 Pair : Telescopic Safety Siderails - Model VS 151-B • 1 Pc : Hospital B.S. Latex Mattress C/w Sanitized PVC Zip Cover Model VS 105-M-A
MODEL: FS 100-C-2
2 SECTION / SINGLE FOWLER POSITIONS • Fixed Height - 550mm • Gas Spring Assisted Backrest Adjustment • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Steel Sheet With Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panels : Detachable And Interchangeable Tubular Steel Frame With Laminated Fibreboard Panels • Castors : 4 x 100mm Grey Rubber Diagonal 2 With Brakes • Mattress Base : 1905mmL x 915mmW C/w : A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets Headend Corners Optional Accessories : • 1 Pair : Telescopic Safety Siderails - Model VS 151-B • 1 Pc : Hospital B.S. Latex Mattress C/w Sanitized PVC Zip Cover Model VS 105-M-A
MODEL: FS 101-A
DOUBLE FOWLER POSITION HOSPITAL BEDSTEAD FIXED HEIGHT • 4 Section, Double Fowler Mattress Base • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With
Ventilation Holes • Finishing : Epoxy Powder Coated • Head And Footend Panel : Detachable And
Interchangeable Tubular Steel Frame With Laminated Fibreboard Panels
• 2 Independent Cranking Mechanism For Backrest Adjustment And Knee Bend Adjustment Cranking Handles Located At Footend Of Bed
• Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes
• Size Of Mattress Base : 1905mmL x 915mmW • Height To Mattress Base : 550mm
MODEL: FS 102-A SINGLE FOWLER POSITION HOSPITAL BEDSTEAD FIXED HEIGHT - 2 Section, Single Fowler Mattress Base - Frame : Tubular Mild Steel - Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes - Finishing : Epoxy Powder Coated - Head And Footend Panel : Detachable And Interchangeable Tubular Steel Frame With Laminated Fibreboard Panels - Mechanical Cranking Mechanism For Backrest Adjustment - Cranking Handle Located At Footend Of Bed - Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes - Mattress Base Size: 1905mmL x 915mmW - Height To Mattress Base : 550mm
MODEL: FS 102-B
SINGLE FOWLER POSITION HOSPITAL BEDSTEAD FIXED HEIGHT - 2 Section, Single Fowler Mattress Base - Frame : Tubular Mild Steel - Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes - Finishing : Epoxy Powder Coated - Head And Footend Panel : Detachable And Interchangeable Tubular Steel Frame With Laminated Fibreboard Panels - Mechnical Cranking Mechanism For Backrest Adjustment - Cranking Handle - Located At Footend Of Bed - Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes - Mattress Base Size : 1905mmL x 915mmW - Height To Mattress Base : 550mm
MODEL: FS 101-B
DOUBLE FOWLER POSITION HOSPITAL BEDSTEAD STEEL HEAD & LEG FRAME / FIXED HEIGHT • 4 Section, Double Fowler Mattress Base • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With
Ventilation Holes • Finishing : Epoxy Powder Coated • 2 Independent Cranking Mechanism For
: Backrest Adjustment : Knee Bend Adjustment
• Cranking Handles Located At Footend Of Bed • Castors : 4 x 100mm, Grey Rubber, Diagonal 2
With Brakes • Size Of Mattress Base : 1905mmL x 915mmW • Height To Mattress Base : 550mm
MODEL: FS 103-A SINGLE FOWLER POSITION HOSPITAL BEDSTEAD STEEL HEAD & LEG FRAME / FIXED HEIGHT • 2 Section, Single Fowler Mattress Base • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With
Ventilation Holes • Finishing : Epoxy Powder Coated • Backrest Adjustment By Cranking Mechanism • Cranking Handle Located At Footend Of Bed • Castors : 4 x 100mm Grey Rubber, Diagonal 2
With Brakes • Mattress Base Size: 1905mmL x 915mmW • Height To Mattress Base : 550mm
MODEL: FS 104-A STANDARD HOSPITAL BEDSTEAD FLAT TOP STEEL HEAD & LEG FRAME / FIXED HEIGHT • Frame : Tubular Mild Steel • Mattress Base : 1.2mm Thick Steel Sheet With
Ventilation Holes • Detachable Tubular Steel Head And Leg Frame • Finishing : Epoxy Powder Coated • Mattress Base Size : 1905mmL x 915mmW • Height To Mattress Base : 550mm Model FS 104-A: • Clw Castors For All 4 Legs • 4 x 75mm Grey Rubber, Diagonal 2 With Brakes. Model FS 104-B : • Head Frame Mounted On 2 Units 75mm, Grey
Rubber Castors • Leg Frame Mounted On Non-Slip Rubber Studs.
MODEL: FS 105
STANDARD HOSPITAL BEDSTEAD FLAT TOP / FIXED HEIGHT LAMINATED PANELS - FIXED
Frame : Tubular Mild Steel Matttress Base : 1.2mm Thick Steel With
Ventilation Holes Head & Footend Panel : Fixed Laminated
Fibreboard Panels With Tubular Steel Frame
Finishing : Epoxy Powder Coated Castors : 4 x 75mm, Grey Rubber, Diagonal 2
With Brakes Mattress Base: 1905mmL x 915mmW Height To Mattress Base : 550mm
MODEL: FS 107-A HOSPITAL CHILD COT BED FLAT TOP / FIXED HEIGHT
Frame & Safety Siderails : Tubular Mild Steel Mattress Base : 1.2mm Thick Steel Sheet With
Ventilation Holes Full Length Safety Siderails With Self Locking
Mechanism Siderails Lowered Down Vertically When Not In
Use Finishing : Epoxy Powder Coated Castors : 4 x 75mm, Grey Rubber, Diagonal 2
With Brakes Mattress Base Size: 1370mmL x 760mmW Height To Mattress Base : 600mm
C/w 75mm Thick P.U. Foam Mattress With Calico Cover
MODEL: FS 107-B HOSPITAL CHILD COT BED FIXED HEIGHT FLAT TOP – TILTING
Frame & Safety Siderails : Tubular Mild Steel Mattress Base : 1.2mm Thick Steel Sheet With
Perforated Ventilation Holes (Manually Adjustable Into 3 Tilting Positions)
Full Length Safety Siderails C/w Self Locking Mechanism
Siderails Lowered Down Vertically When Not In Use
Finishing : Epoxy Powder Coated Castors : 4 x 75mm, Grey Rubber Diagonal 2
With Brakes Mattress Base Size : 1370mmL x 760mmW Height To Mattress Base : 600mm C/w 75mm Thick P.U. Foam Mattress With
Calico Cover
MODEL: FS 106-A
ADULT COT BED FLAT TOP / FIXED HEIGHT - Frame & Safety Siderails : Tubular Mild Steel - Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes - Full Length Safety Siderails With Self Locking Mechanism - Siderails Lowered Down Vertically When Not In Use Finishing : Epoxy Powder Coated - Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes - Mattress Base Size : 1905mmL x 915mmW - Height To Mattress Base : 610mm
MODEL: FS 106-B
ADULT COT BED - FIXED HEIGHT SINGLE FOWLER POSITION - Frame & Safety Siderails : Tubular Mild Steel - Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes - Backrest Adjustable By Cranking Mechanism With Cranking Handle Located At Footend Of Bed - Full Length Safety Siderails With Self Locking Mechanism - Siderails Lowered Down Vertically When Not In Use - Finishing : Epoxy Powder Coate - Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes - Mattress Base: 1905mmL x 915mmW - Height To Mattress Base : 610mm
MODEL: FS 106-C ADULT COT BED - FIXED HEIGHT DOUBLE FOWLER POSITIONS - Frame & Safety Siderails : Tubular Mild Steel - Mattress Base : 1.2mm Thick Steel Sheet With Ventilation Holes - Backrest And Knee Bend Positions Adjustable By Cranking Mechanism With Individual Cranking Handles Located At Footend Of Bed - Full Length Safety Siderails With Self Locking Mechanism - Siderails Lowered Down Vertically When Not In Use - Castors : 4 x 100mm Grey Rubber, Diagonal 2 With Brakes - Mattress Base : 1905mmL x 915mmW -Height To Mattress Base : 610mm
MODEL: FS 157-B CANVAS BED FOR MOBILE BLOOD DONOR SESSIONS FOLDABLE LEGS & LENGTH WISE
-Tubular Steel Frame - Finishing : Epoxy Powder Coated - Heavy Duty Nylon Canvas Material For Bed Top - Blue Colour - Size: 1850mmL x 750mmW x 600mmH
Medical Electric Transfer Vehicle Model FSE-I Main function and feature: The transfer device is used to transfer the patient automatically between the operation table (and medical bed) and the device without any move action by the operator. It can effectively avoid causing any further injury to the patient to protect the patient and reduce operator’s physical intervenes during the transfer course. The device height is adjustable to any types of medical bed or operation table. The foot brake is equipped to control 4 wheels which can be used to lock the device during the transfer procedure. The device has retractable safety side rails on the both sides to protect the patient and it also has IV pole. It is easy to use hand control panel to transfer the patient on the operation table or hospital bed. Storage batteries make it safe and convenient to operate and use the transfer device. Technical parameter Surface Measures (LxW): 2000x670mm Height (minimum-maximum): A: 560-860mm (Dia.150mm truckle) B: 610-910mm (Dia.200mm truckle) Max slide distance of board: 520mm Weight of equipment: 150kgs Maximum weight of patient: 135kgs Storage battery: (12V, 13AH) x 2PCS Power supply : AC220V/110V, 50HZ/60HZ Accessories: IV pole 1PC Connection cable with main plug 1PC
Medical Electric Transfer Vehicle Model FSE-II Main functions and features: It always puzzled the medical workers that move the intensive patients, such as fracture and cerebral hemorrhage patients, patients after their operations and overweight patients. How should we ensure their moving safety and comfort? This product can settle the question well. This vehicle adopts special action design, it can move the patient smoothly and comfortably under the circumstance that the patent don't need to make any move action. This can avoid second injury for irrational move. This system can realize two-way docking between two foundations, and it can be used in the operating room, ICU and so on which are purified places. The three grade truckles which are made in Germany, can apply the brake reliably, make the system nimble to push and move, and also has the guidance function. It is easy for single person to control freely when he push and move the vehicle. Main Specification: Surface Measures (LXW) : 2020mm x680mm Transfer Range of Up and Down :590mm-880mm Transfer Distance of Panel :510mm Weight of equipment : 242kgs Maximum loading : 135kgs Storage Battery : (12V, 13AH)X2PCS Power wire : AC220V/110V, 50HZ/60HZ Accessories: Transfusion Holder: 1pc Power Wire: 1pc
MODEL : FS 108-A
Finishing: Epoxy Powder Coated Frame: Tublar Mild Steel • Concaved Anodised Aluminium Top - 1.2mm
Thick Chromium Plated Pushing Handle At Both End • Size: 1980mmL x 560mmW x 800mmH MODEL VS
108-A Castor: 4x125mm. Grey Rubber MODEL VS 108- 20 Castor: 4x200mm, Grey Rubber
Optional :-
• Mattress For Hard Top Patient Trolley • 50mm Thick P.U. Foam With Brown Colour Vinyl PVC
Covering. Size: 1850mmL x 560mmW
MODEL: FS 109-E
HI-LO PATIENT TRANSFER / RECOVER TROLLEY • Hydraulic HI-LO Control- 500mm to 900mm • Hydraulic System - GERMANY • Foot Pump Operated At Both Side Of Trolley • Gas Spring Control For Forward & Reverse Trendelenburg Positions And Backrest Adjustment • Mild Steel Constructed Framework • Stainless Steel Sheet Mattress Base • Finishing : Epoxy Powder Coated • Accessories : - Vinyl PVC P.U.Foam Mattress - 50mm - Removable - 1 Pair'Fold-Down' Light Weight Aluminium Safety Siderails with Self-Locking Mechanism - 1 No. Double Hook Stainless Steel IV Pole With Receiving Sockets At 4 Corners - Pushing Rubberised Bumper Handle At Both End - Oxygen Cylinder Bracket Beneath Mattress Base - Utility Tray Beneath Mattress Base • Size: - - 2080mmL x 700mmW ( Overall ) - 1980mmL x 600mmW ( Mattress Base ) • Castors : 4 x 200mm Non-Marking Grey Rubber, Diagonal 2 With Double Brakes-Static & Directional Optional Safety Siderails - FS 151-B - Telescopic Model - Self-Locking Mechanism - Chrome – Plated
MODEL: FS 109-D
HI-LO PATIENT TRANSFER TROLLEY • Frame: Tubular Mild Steel • Finishing: Epoxy Powder Coated • Stainless Steel Sheet Constructed Trolley Top • Cranking Mechanism Adjustment For: - HI-LO Positions From 500mm To 850mm - Backrest Adjustment • Individual Cranking Handles Located At Footend Of Bed • Rubber Bumpers At 4 Corners • Accessories : - 50mm Thick Removable P.U. Foam Mattress With Vinyl PVC Cover - A Pair Of Telescopic Adjustable Safety Siderails - A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets At Head End - Utility Tray And Oxygen Cylinder Bracket Located Beneath Trolley Top - Detachable Head And Footend Wooden Panels • Castors: 4 x 150mm Grey Rubber. Diagonally 2 With Brakes
MODEL : FS 109-A-1 PATIENT TRANSFER TROLLEY-FIXED HEIGHT • Frame: Tubular Mild Steel • Finishing: Epoxy Powder Coated • Stainless Steel Sheet Constructed Trolley Top • C/w: A Manually Adjustable Backrest - 4 Reclining Positions • Accessories: - 50mm Thick Removable P.U.Foam Mattress With Brown Vinyl PVC Cover - A Pair Of Telescopic Adjustable Safety Siderails -A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets At 4 Corners - Pushing Rubberised Bumper Handle At Both End - Utility Tray And Oxygen Cylinder Bracket Located Beneath Trolley Top - Castors: 4 x 125mm, Grey Rubber, Diagonal 2 With Brakes Size: 1980mmL x 560mmW x 800mmH Model FS 109- A-20 Same Specifications Castors: 4 x 200mm, Grey Rubber, Diagonal 2 With Brakes
MODEL :FS 109-B-1
PATIENT RECOVERY TROLLEY – FIXED HEIGHT • Frame: Tubular Mild Steel • Finishing: Epoxy Powder Coated • Stainless Steel Sheet Constructed Trolley Top C/w : A Mechanical Cranking Adjustable Backrest, Cranking Handle At Footend Of Trolley • Accessories: - 50mm Thick Removable P.U. Foam Mattress With Brown Vinyl PVC Cover - A Pair Of Telescopic Safety Siderails - A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets At 4Corners - Utility Tray And Oxygen Cylinder Bracket Located Beneath Trolley Top - Detachable Head And Footend Wooden Panels • Castors: 4 x 125mm, Grey Rubber, Diagonal 2 With Brakes Size: 1980mmL x 560mmW x 800mmH MODEL FS 109-B-20 Same Specifications • Castor: 4 x 200mm, Grey Rubber,Diagonal 2 With Brakes
MODEL : FS 109-C-1 (PATIENT RECOVERY TROLLEY – FIXED HEIGHT) • Frame: Tubular Mild Steel • Finishing: Epoxy Powder Coated • Stainless Steel Sheet Constructed Trolley Top • Cranking Mechanism Adjustment For: - Backrest - Trendelenburg Positions-Forward And Reverse • Individual Cranking Handles Located At Footend Of Bed. • Revolving Bumpers At 4 Corners Accessories: - 50mm Thick Removable P.U.Foam Mattress With Brown Vinyl PVC Cover - A Pair Of Telescopic Adjustable Safety Siderails. - A Stainless Steel Double Hook IV Drip Pole With Receiving Sockets At 4 Corners - Utility Tray And Oxygen Cylinder Bracket Located Beneath Trolley Top - Detachable Head And Footend Wooden Panels • Castors: 4 x 125mm, Grey Rubber, Diagonal 2 With Brakes • Size: 1980mmL x 560mmW x 800mmH Model FS 109- C-20 • Same Specifications Castors: 4 x 200mm, Grey Rubber, Diagonal 2 With Brakes
MODEL : FS 110-C OVER BED TABLE - ELEGANCE Frame : Mild Steel Constructed Finishing : Epoxy Powder Coated Sliding Part - Chrome-Plated Height Adjustment : Gas Spring Assisted - (Germany) Height Adjustable From 700mm To 1100mm Table Top of Laminated Fibreboard Surface With All Round Ramin Edgings. Surface Size : 830mmL x 360mmW Castors : 4 x 50mm, Grey Rubber Load Capacity For Table Surface - 25kg.
MODEL : FS 110-A
OVERBED TABLE (CARDIAC TABLE TABLE TOP HEIGHT ADJUSTABLE Frame :Tubular Mild Steel Finishing : Epoxy Powder Coated Chrome-Plated Adjustable Arm Table Top : Manual Height Adjustable From 700mm To 1100mm Table Top : Constructed of Laminated Fibreboard With All Round Moulded Rubber Edgings. Size : 830mmL x 360mmW Castors : 4 x 50mm Swivelling Type
MODEL : FS 111
OVERBED TABLE – FIXED HEIGHT Frame : Tubular Mild Steel Finishing : Epoxy Powder Coated Table Top : Fixed Height - 930mm Table Top Constructed Of Laminated Fibreboard With All Round Moulded Rubber Edgings Size : 830mmL x 360mmW Castors : 4 x 50mm Swivelling Type
MODEL : FS 112-A BEDSIDE LOCKER - CLASSIC Steel Sheet Constructed C/w A Drawer And A 2 Shelves Closed Cabinet Tray At Rear For Holding Vacuum Flask & Drink Containers Towel Rail At Rear Of Locker Locker Top Constructed Of Laminated Fibreboard With All Round Moulded Rubber Edgings Locker Top Size : 406mm x 406mm Finishing : Epoxy Powder Coated Castors : 4 x 50mm Swivelling Type Overall Size : 406mmW x 510mmD x 800mmH Optional : Castors 4 x 50mm Grey Rubber Type
MODEL : FS 112-B BEDSIDE LOCKER – ELEGANCE Steel Sheet Constructed C/w A Drawer And A 2 Shelves Closed Cabinet Recess At Rear For Keeping Vacuum Flask And Drink Containers Towel Rail At Rear Of Locker Locker Top Constructed Of Laminated Fibreboard With All Round Moulded Rubber Edgings Locker Top Size : 406mm x 406mm Finishing : Epoxy Powder Coated Castors : 4 x 50mm Swivelling Type Overall Size : 406mmW x 510mmD x 800mmH Optiona : Castors: 4 x 50mm Grey Rubber Type
MODEL : FS 112-C BEDSIDE LOCKER - DELUXE Steel Sheet Constructed C/w A Drawer And A 2 Shelves Closed Cabinet . Drawer & Cabinet Door Constructed Of Fibreboard Material Locker Top Laminated Fibreboard With All Round Moulded Rubber Edgings Side Railing : 40mm High On 3 Sides Of Locker Top Size : 406mm x 406mm Finishing : Epoxy Powder Coated Castors : 4 x 50mm Grey Rubber Size : 406mmW x 510mmD x 800mmH
MODEL : FS 112-D BEDSIDE LOCKER Completed Fibreboard Constructed C/w A Drawer And A 2 Shelves Closed Cabinet With All Round Vanished Ramin Wood Edgings Towel Rail At Rear Of Locker - Stainless Steel Locker Top Size : 450mmW x 500mmD Castors : 4 x 50mm Grey Rubber Overall Size : 450mmW x 500mmD x 800mmH
MODEL : FS 163 CANVAS BACKREST Tubular Steel Framework - 3 Reclining Positions Finishing Epoxy Powder Coated Removable And Washable Beige Colour Canvas Size 460mmW x 510mmH
MODEL: FS 105-C PATIENT'S LIFTER OLE (MONKEY PULLEY) FOR ATTACHMENT TO BED HEAD PANEL Tubular Mild Steel Construction Finishing : Chrome-Plated C/w : Adjustable Hand Grip : 2 Nos. Bracket / Clamp For Securing To Bed Head Panel
MODEL: FS 105-M
MATTRESS FOR HOSPITAL BEDS Size : 1905mmL x 915mmW x 100mm Thick C/w : Sanitized, Water Repellant & Fire Retartant Vinyl PVC (Medicare /Australia) Zip Bag Cover FS 105-M-A : B.S. Latex Mattress FS 105-M-B : P.U. Foam Mattress
MODEL : FS 105-E MOTHER BED / CHAIR – PAEDS WARD -Tubular Steel Frame - Chrome-Plated - Brown Vinyl PVC Padded Foam Cushion Top - 75mm Thick , Retractable To Be As Chair, Extended to be As Bed - Overall Size : 1850mmL x 600mmW x 450mmH
MODEL : FS 151-A STANDARD SAFETY SIDECOTS/RAILS THREE QUARTER LENGTH - Tubular Steel Constructed Framework - Finishing : Epoxy Powder Coated - Lowered Down Vertically When Not In Use - Detachable And Interchangeable - C/w Safety Catch
MODEL: FS 151-B TELESCOPIC SAFETY SIDECOTS I RAILS FULL LENGTH - Tubular Steel Constructed Framework - Finishing : Chromed-Plated - Lowered Down Vertically When Not In Use - Detachable And Interchangeable - C/w Self Locking Device, Both End
MODEL: FS 151-C SAFETY SIDERAILS FOR HOSPITAL BED - Aluminium - Light Weight - Fold Down Version - Auto Locking Device - Footend Control - Detachable And Interchangeable
ELECTRIC DELIVERY BED MODEL FA 3000 Features:
• Convertible from bed to delivery unit • Electric foot pedal/handset controlled Hi-Lo & Backrest • Built in Backup Battery • Gas spring Trendelenburg Titling • Detachable Head and foot board • 150mm Dia Tenta (Germany)central locking castors • Telescopes side rail • Removable mould mattress base • Full accessories Kit BED FRAME MATERIAL:
• Steel Framework • Finishing scratch and chip resisting epoxy coating • Mattress cover water proof,fire retardant,anti bacterial treated
Anti static DIMENSION:
• 1990mmL X 1390mmW X 810mmH
MODEL: FS 113 DELIVERY I OBSTETRIC BED DELUXE HI-LO MODEL - 2 Section Bed Top - X-Ray Translucent Perspex Mattress Base - Hydraulic HI-LO With Foot Pump Control - Adjustable Backrest And A Retractable Legrest Section - Gas Spring Assisted Accessories : - 2 Section Removable 75mm Thick Vinyl PVC Cover P.U. Foam Mattress - Black Colour - 1 Unit Stainless Steel Double Hook Adjustable IV Drip Pole With Receiving Sockets At Both Headend Corners - 1 Pair Adjustable Lithotomy Stirrups With Padded Adjustable Calf Rest - 1 Unit Stainless Steel Rectangular Basin Mounted On A Retractable Bracket - 1 Pair Of Detachable Safety Sidecots - Chrome-Plated - 1 Pair Detachable Hand Grip - 1 Unit Single Step Stool - Tubular Mild Steel Framework - Finishing : Epoxy Powder Coated - Castors : 4 x 125mm Non-Marking Grey Rubber, All With Brakes - Size : Lithotomy Positions : 1120mmL x 815 mmW Extended Positions : 1955mmL x 815mmW HI-LO Height - 600mm-900mm
MODEL: FS 114-C
DELIVERY / OBSTETRIC BED CLASSIC MODEL - Tubular Steel Frame - Finishing : Epoxy Powder Coated - Stainless Steel Mattress Base - Leg Section With Removable Vinyl PVC Mattress, Retractable Underneath Main Section To Maintain Lithotomy Positions - Main Section C/w Gas Spring Assisted Adjustable Backrest - Removable 75mm Thick Vinyl PVC Padded P.U. Foam Mattress – Reverse Trendelenburg Positions By Means Of A Gas Spring Mechanism With Handle Located At Headend Of Bed Accessories : - 1 unit Stainless Steel Double Hook Adjustable IV Pole 1 Pair Adjustable Padded Lithotomy Stirrups C/w Canvas Leggings - Unit Stainless Steel Soiled Basin - 360mm, Mounted On A Retractable Bracket - Finishing : Epoxy Powder Coated - Castors : 4 x 125mm Grey Rubber, All With Brakes - Size : - Lithotomy Positions : 1100mmL x 760mmW - Extended Positions : 1880mmL x 700mmW • - Height (Fixed) : 800mm
MODEL : FS 114-A DELIVERY / OBSTETRIC BED – STANDARD MOBILE
- Adjustable Backrest And Retractable Legrest Section - Leg Section With Removable Vinyl PVC Mattress, Retractable Underneath Main Section To Maintain Lithotomy Positions - Main Section C/w A Manually Adjustable Backrest4 Reclining Positions - 75mm Thick Vinyl PVC Padded P.U. Foam Mattress -Forward And Reverse Trendelenburg Postitions By Means Of A Cranking Mechanism With Handle Located At Both Side Of Bed
Accessories :
- 1 Unit Stainless Steel Double Hook Adjustable IV Pole - 1 Pair Adjustable Padded Lithotomy Stirrups C/w Canvas Leggings - 1 Unit Stainless Steel Soiled Basin - 360mm, Mounted On A Retractable Bracket - Finishing : Epoxy Powder Coated - Castors : 4 x 125mm Grey Rubber, All With Brakes - Size : - Lithotomy Positions : 1100mmL x 760mmW - Extended Positions : 1880mmL x 760mmW - Height (Fixed) : 800mm
MODEL: FS 114-B
DELIVERY / OBSTETRIC BED STANDARD MODEL - Adjustable Backrest And Retractable Legrest Section - Leg Section With Removable Vinyl PVC Mattress, Retractable Underneath - Main Section To Maintain Lithotomy Positions - Main Section C/w A Manually Adjustable Backrest4 Reclining Positions - 75mm Thick Vinyl PVC Padded P.U. Foam Mattress - Forward And Reverse Trendelenburg Postitions By Means Of A Cranking Mechanism With Handle Located At Both Side Of Bed Accessories : - 1 Unit Stainless Steel Double Hook Adjustable IV Pole - 1 Pair Adjustable Padded Lithotomy Stirrups C/w Canvas Leggings - 1 Unit Stainless Steel Soiled Basin-360mm, Mounted On A Retractable Bracket - Finishing : Epoxy Powder Coated - Size : - Lithotomy Positions : 1100mmL x 760mmW Extended Positions : 1880mmL x 760mmW Height (Fixed) : 800mm 4 Legs Mounted On Rubber Studs
MODEL: FS 115 DELIVERY COUCH - Tubular Steel Framework, 4 Legs Mounted On Rubber Studs - 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top - Manually Adjustable Backrest - 4 Reclining Positions - Legrest Can Be Manually Lowered Down Vertically For Lithotomy Positions - Finishing : Epoxy Powder Coated Accessories : - 1 Unit Stainless Steel Double Hook Adjustable IV Drip Pole - 1 Pair Adjustable Padded Lithotomy Stirrups C/w Canvas Leggings - 1 Pair Safety Siderails Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 116-A
EXAMINATION COUCH - STANDARD - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining Positions - Size: 1850mmL x 600 mmW x 750mmH
MODEL: FS 116-B
EXAMINATION COUCH - KNOCK DOWN FRAME - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining Positions - Framework In 'Knock Down' Form For Easy Transportation And Packing Purposes - Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 116-C
EXAMINATION COUCH CIW STEP - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining Positions - Size: 1850mmL x 600mmW x 750mmH - C/w A Step Stool - Single Step Attached To Couch Frame
MODEL: FS 116-W WOODEN ULTRASOUND COUCH - Wooden Framework - Vanished - Cushion Top - Black Vinyl PVC Padded P.U. Foam - 75mm Thick - C/w : Adjustable Backrest - 4 Reclining Positions - Size: 1850rnmL x 600mmW x 750mmH
MODEL: FS 117 EXAMINATION COUCH CM DRAWERS & STEP STOOL - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Steel Sheet Constructed Drawers And Shelves - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining Positions - C/w: 3 Nos. 150mm Deep Drawers - 2 Nos. Utility Shelves - 1 No. Retractable Step Stool - Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 118-A EXAMINATION COUCH C/W CABINET - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Steel Sheet Constructed Cabinet And Shelf
With Sliding Doors - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam
Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining
Positions - Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 118-B EXAMINATION COUCH C/V CABINET & 2 DRAWERS - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Steel Sheet Constructed Cabinet And 2 Drawers - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam
Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining
Positions - Size: 1850mmL x 600 mmW x 750mmH
MODEL: FS 119-A GYNAE EXAMINATION STANDARD • Tubular Steel Framework • 4 Legs Mounted On Rubber Studs • 75mm Thick Vinyl PVC Padded P.U. Foam
Cushion Top - Black Colour • Finishing : Epoxy Powder Coated • Backrest : Adjustable - 4 Reclining Positions • C/w : A Pair Of Lithotomy Stirrups With Canvas
Leggings • Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 119-B GYNAE EXAMINATION COUCH - HILUX - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - 75mm Thick Vinyl PVC Cushion Top - Finishing : Epoxy Powder Coated - Backrest : Adjustable - 4 Reclining Positions - C/w : A Pair Of Lithotomy Stirrups With Canvas
Leggings - 360mm Diameter Stainless Steel Basin Mounted
On A Retractable Bracket - Double Hook IV Drip Pole - Chromed - Single Step Attached - Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 120 GYNAECOLOGY EXAMINATION COUCH (GYNAE COUCH C/W CABINET) - Tubular Steel Framework - 4 Legs Mounted On Rubber Studs - Steel Sheet Constructed Cabinet - With One Shelf /
Sliding Doors - Finishing : Epoxy Powder Coated - 75mm Thick Vinyl PVC Padded P.U. Foam
Cushion Top - Black Colour - Manually Adjustable Backrest - 4 Reclining
Positions - Legrest Lowered Down Vertically For Lithotomy
Positions - C/w : A Pair Of Adjustable Padded Lithotomy
Stirrups With Canvas Leggings - Size: 1850mmL x 600mmW x 750mmH
• 75mm Thick Vinyl PVC Padded P.U. Foam Cushion Top -
Black Colour • Manually Adjustable Backrest - 4 Reclining Positions • Retractable Legrest With A Removable Vinyl PVC Cushion • A Soiled Receptacle Stainless Steel Basin Mounted On A
Retractable Bracket • A Pair Of Adjustable Padded Lithotomy Stirrups With
Canvas Leggings • A Double Hook IV Drip Pole - Chromed • Size: 1850mmL x 600mmW x 750mmH
MODEL: FS 121 GYNAECOLOGY EXAMINATION COUCH GYNAE COUCH CM CABINET / DRAWERS • Tubular Steel Framework • 4 Legs Mounted On Rubber Studs • Steel Sheet Constructed Cabinet And 2 Drawers • Cabinet With Sliding Doors • Finishing : Epoxy Powder Coated
MODEL: FS 122-A PATIENT’S STEP STOOL DOUBLE STEP • Frame : Tubular Steel -
Epoxy Coated • 4 Legs On Rubber Studs • Step Top : Non-Slip Rubber
Mat / Plywood Base • Size: 400mmW x 460mmD x
400mmH
Steel • 4 Legs On Rubber Studs • Step Top : Non-Slip Rubber
Mat / Stainless Steel Base • Size: 400mmW x 460rrimD x
400mmH
MODEL: FS 123-A PATIENT'S STEP STOOL – SINGLE STEP • Frame : Tubular Steel - Epoxy
Coated 4 Legs On Rubber Studs
• Step Top : Non-Slip Rubber Mat / Plywood Base
• Size: 400mmW x 230mmD x 200mmH
MODEL: FS 123-B SURGEON'S STEP STOOL – SINGLE STEP • Tubular Stainless Steel Framework • 4 Legs On Rubber Studs • Step Top : Non-Slip Rubber Mat /
Stainless Steel Base • Size: 400mmW x 230mmD x
200mmH
MODEL: FS 124-B INSTRUMENT TROLLEY - STAINLESS STEEL WITHOUT GUARDRAILS - FLAT TOP - Frame: 25mm x 1.2mm SUS Hollow Section - 2 Nos Stainless Steel Shelves - 1.Omm SUS/304/B
Sheet - No Rails With All Corners Rounded - Castors : 4 x 75mm Grey Rubber Model FS 124-B-1 : 900mmL x 450mmW x 860mmH Model FS 124-B-2 : 750mmL x 450mmW x 860mmH Model FS 124-8-3 : 600mmL x 450mmW x 860mmH Model FS 124-B-4 : 450mmL x 450mmW x 860mmH
MODEL: FS 124-A INSTRUMENT TROLLEY STAINLESS STEEL C/W GUARDRAILS • Frame: 25mm x 1.2mm SUS Hollow Section • 2 Nos Stainless Steel Shelves - 1.Omm SUS/304/B
Sheet • Guardrails : 50mm High On 3 Sides For Top Shelf • Castors : 4 x 75mm Grey Rubber Model FS 124-A-1 : 900mmL x 450mmW x 860mmH Model FS 124-A-2 : 750mmL x 450mmW x 860mmH Model FS 124-A-3 : 600mmL x 450mmW x 860mmH Model FS 124-A-4 : 450mmL x 450mmW x 860mmH
MODEL: VS 124-C
INSTRUMENT TROLLEY - STAINLESS - 3 TIERS - Frame: 25mm x 1.2mm SUS Hollow Section - 3 Shelves - 1.Omm SUS/304/B Sheet With
25mm Bendup Lips On All 4 Sides - C/w Pushing Handle At Both End - Castors : 4 x 100mm Grey Rubber Model FS 124-C-1 : 900mmL x 500mmW x 960mmH Model FS 124-C-2 : 750mmL x 500mmW x 960mmH Model FS 124-C-3 : 600mmL x 500mmW x 960mmH
MODEL: FS 125-A INSTRUMENT TROLLEY - STAINLESS STEEL - Frame: 25mm x 1.2mm SUS Hollow Section - 2 Removable Shelves - 1.Omm SIJS/304/B Sheet - Without Guardrails - Castors : 4 x 75mm Grey Rubber Model FS 125-A-1 : 900mmL x 450mmW x 860mmH Model FS 125-A-2 : 750mmL x 450mmW x 860mmH Model FS 125-A-3 : 600mmL x 450mmW x 860mmH Model FS 125-A-4 : 450mmL x 450mmW x 860mmH
MODEL: FS 125-B INSTRUMENT TROLLEY - STAINLESS STEEL • Frame: 25mm x 1.2mm SUS Hollow Section • 2 Removable Shelves - 1.Omm SUS/304/B Sheet • With Guardrails On 3 Sides For Both Shelves, Top
Guardrails RerRemovable • Castors : 4 x 75mm Grey Rubber Model FS 125-B-1 : 900mmL x 450mmW x 860mmH Model FS 125-B-2 : 750mmL x 450mmW x 860mmH Model FS 125-B-3 : 600mmL x 450mmW x 860mmH Model FS 125-B-4 : 450mmL x 450mmW x 860mmH
MODEL: VS 126 INSTRUMENT TROLLEY C/M GUARDRAILS FOR CLINIC & EXAMINATION ROOM • Tubular Mild Steel Frame • Finishing : Chrome-Plated • 2 Stainless Steel Shelves -1.Omm SUS/304/B Sheet • Guardrails : 50mm High On 3 Sides For Top Shelf • Castors : 4 x 75mm Grey Rubber Model FS 126-1 : 900mmL x 450mmW x 860mmH Model FS 126-2 : 750mmL x 450mmW x 860mmH Model FS 126-3 : 600mmL x 450mmW x 860mmH Model FS 126-4 : 450mmL x 450mmW x 860mmH
MODEL: FS 127-B-1 WASHING & CHANGING TROLLEY FOR GENERAL WARD USE - Tubular Mild Steel Frame - Finishing - Epoxy Powder Coated - 2 Stainless Steel Shelves - 1.Omm SUS/304/B Sheet - Guardrails - 50mm High On 3 Sides For Top Shelf - Castors - 4 x 75mm Grey Rubber C/w : 1 Unit Stainless Steel Basin - 360mm Diameter 1 Unit 13 Litres Plastic Soiled Collection Pail Size Of Trolley : 750mmL x 450mmW x 860mmH
MODEL: FS 127-A INSTRUMENT TROLLEY – FOR GENERAL WARD USE - Tubular Mild Steel Frame - Finishing - Epoxy Powder Coated - 2 Stainless Steel Shelves - 1.Omm SUS/30418 Sheet - Guardrails - 50mm High On 3 Sides For Top Shelf - Castors - 4 x 75mm Grey Rubber Model FS 127-A-1 : 900mmL x 450mmW x 860mmH Model FS 127-A-2 : 750mmL x 450mmW x 860mmH Model FS 127-A-3 : 600mmL x 450mmW x 860mmH Model FS 127-A-4 : 450mmL x 450mmW x 860mmH
MODEL: FS 128-A
INSTRUMENT TROLLEY – WITHOUT GUARDRAILS
Tubular Steel Frame - Epoxy Powder Coated 2 Nos. Stainless Steel Shelves - Fixed Castors : 4 x 75mm Grey Rubber
Model FS 128-A-1 : 900mmL x 450mmW x 860mmH Model FS 128-A-2 : 750mmL x 450mmW x 860mmH Model FS 128-A-3 : 600mmL x 450mmW x 860mmH Model FS 128-A-4 : 450mmL x 450mmW x 860mmH
MODEL: FS 127-B-2 O.T. CURVED / HALF MOON TROLLEY STAINLESS STEEL / 2 SHELVES • Complete Stainless Steel Construction • C/w 2 Removable Shelves - 1.2mm SUS/304/B Sheet • Castors : 5 x 100mm Grey Rubber • Size: 1200mmL x 450mmW x 860mmH
MODEL: FS 128-B PLASTER APPLICATION TROLLEY FOR ORTHO CLINIC & PLASTER ROOM Standard Accessories : - 3 Nos. Utility Drawers - 2 Nos. Shelves, Top Shelf With 25mm High Bendup Lips On 3
Sides - 1 No. Stainless Steel Bucket - 15 Litres On Swivel Bracket - 1 No. Stainless Steel Basin-360mm Diameter Castors : 4 x 100mm Grey Rubber Size: 900mmL x 450mmW x 900mmH Model FS 128-8- 1: Complete Stainless Steel Construction Model FS 128-B-2 : Epoxy Powder Coated Framework / Drawers Stainless Steel Shelves
MODEL: FS 165 E. C. G. TROLLEY STANDARD UNIVERSAL MODEL - Tubular Steel Frame - Steel Sheet Contructed Drawer And Shelf - Finishing : Epoxy Powder Coated - C/w A Chrome-Plated Adjustable Pole For
Hanging Electrode Cables - Mounted On 4 Units 50mm Swivelling Castors
Size: 400mmL x 350mmW x 850mmH
MODEL: FS 129-A DRESSING TROLLEY 2 DRAWERS - Tubular Steel Frame - Steel Sheet Constructed Drawers - Finishing : Epoxy Powder Coated - C/w 2 Stainless Steel Sheet Constructed Shelves - Guardrails On 3 Sides For Top Shelf - Castors : 4 x 75mm Grey Rubber - Size: 750mmL x 450mmW x 850mmH
MODEL: FS 129-B DRESSING TROLLEY - STAINLESS STEEL 2 DRAWERS - Complete Stainless Steel Construction - C/w 2 Shelves - Guardrails On 3 Sides For Both Shelves - 2 Drawers Located Beneath Top Shelf - Castors : 4 x 75mm Grey Rubber - Size: 750mmL x 450mmW x 850mmH
MODEL: FS 130-A DRESSING TROLLEY 1 DRAWER • Tubular Steel Framework • Steel Sheet Constructed Drawer • Finishing : Epoxy Powder Coated • C/w 2 Stainless Steel Shelves • Top Shelf With Guardrails On 3 Sides • Castors : 4 x 75mm Grey Rubber • Size: 450mmL x 450mmW x 860mmH
MODEL: FS 130-B DRESSING TROLLEY - STAINLESS STEEL 1 DRAWER - Complete Stainless Steel Construction - C/w 2 Shelves - Top Shelf With Guardrails On 3 Sides - Drawer Located Beneath Top Shelf - Castors : 4 x 75mm Grey Rubber - Size: 450mmL x 450mmW x 860mmH
MODEL: FS 131-A
BABY BASSINETTE COT C/W MOBILE TROLLEY WITH CABINET • Trolley Constructed Of Tubular Steel Frame • Steel Sheet Closed Cabinet And Shelf • Finishing : Epoxy Powder Coated • Castors : 4 x 75mm Grey Rubber • C/w A Clear Perspex Bassinette • Inclusive Of A 25mm Thick Vinyl PVC Mattress
MODEL: FS 131-B BABY BASSINETTE COT C/W MOBILE TROLLEY WITH CABINET • Trolley Constructed Of Tubular Steel Frame • Steel Sheet Closed Cabinet And Shelf • Finishing : Epoxy Powder Coated • Castors : 4 x 75mm Grey Rubber • C/w A Clear Perspex Bassinette • Inclusive Of A 50mm Thick Vinyl PVC Mattress • C/w A Bracket For Securing Bassinette Into 3 Elavated
Positions
MODEL: FS 132-A
BABY BASSINETTE COT C/W MOBILE TROLLEY / SHELF ONLY • Trolley Constructed Of Tubular Steel Frame • Steel Sheet Shelf • Finishing : Epoxy Powder Coated • Castors : 4 x 75mm Grey Rubber • C/w : A Clear Perspex Bassinette • Inclusive Of A 25mm Thick Vinyl PVC Mattress • C/w A bracket For Securing Bassinette into 3
Elevated Position
MODEL: FS 132-B BABY BASSINETTE COT C/W MOBILE TROLLEY / SHELF ONLY - Trolley Constructed Of Tubular Steel Frame - Steel Sheet Shelf - Finishing : Epoxy Powder Coated - Castors : 4 x 75mm Grey Rubber - C/w A Clear Perspex Bassinette - Inclusive Of A 50mm Thick Vinyl PVC Mattress - C/w A Bracket For Securing Bassinette Into 3
Elevated Positions
MODEL: FS 134-A
BABY RESUSCITATION UNIT C/W RADIANT C/W RADIANT WARMER • Tubular Steel Constructed Framework and Steel Sheet
Lamp Box, Heater Zone, Drawers And Shelves • Finishing : Epoxy Powder Coated • Height Of Radiant Heater -Adjustable • Radiant Heater C/w Thermostat Heat Control, 2 Nos.
Daylight Lamp On/Off Switches, Safety Fuse, Indicator Light; Timmer And Hour Meter
• Castors : 4 x 125mm Ball Bearing Grey Rubber x Diagonal 2 With Brakes
• Voltage : 240V 50Hz Accessories : • Instrument Tray C/w Cover • Stainless Steel Double Hook IV Pole • Oxygen Cylinder Bracket - `E' Size • 3 Nos. Utility Drawers & Removable Clear Side
Perspexs • Tilting Mattress Base With Removable 50mm
MODEL: FS 133-B
BABY PHOTOTHERAPHY UNIT- DOUBLE THERAPHY FOR JAUNDICE BABY • Tubular Steel Constructed Mobile Stand • Mounted On 4 Units 100mm Ball Bearing Grey Rubber
Castors, 2 With Brakes. • Steel Sheet Constructed Lamp Box - Upper And Lower Unit • Height Of Upper Lamp Box Adjustable • Finishing : Epoxy Powder Coated • Voltage : 240V 50Hz • C/w 6 Lamps - 2 Daylight And 4 Blue Phototheraphy Type-
For Upper Box, 4 Blue Phototheraphy Type-For Lower Box • On/Off Switches, Safety Fuse, Indicator Light • Timmer : Maximum Three Hours • Hour Meter
MODEL: FS 133-A BABY PHOTOTHERAPHY UNIT - SINGLE • Tubular Steel Constructed Mobile Stand • Mounted On 4 Units 100mm Grey Rubber
Castors, 2 With Brakes • Steel Sheet Constructed Lamp Box • Height Of Lamp Box Adjustable • Finishing : Epoxy Powder Coated • Voltage : 240V 50Hz • C/w 6 Lamps - 2 Daylight And 4 Blue
Phototheraphy Type • On/Off Switches, Safety Fuse, Indicator Light • Timmer : Maximum Three Hours • Hour Meter
MODEL: FS 155 INFANT RADIANT WARMER / HEATER HEIGHT ADJUSTABLE • Tubular Steel Constructed Mobile Stand • Lamp Box : Adjustable Height • Finishing : Epoxy Powder Coated • Castors : 4 x 100mm Ball Bearing Grey Rubber All With Brakes • Voltage : 240V 50Hz • C/w : Heater With Thermostat Regulator : On/Off Switches : 2 Nos. 32 Watts Daylight Lamp : Timmer Control : Hour Meter
MODEL: FS 158 BABY BATH TROLLEY Tubular Steel Framework Finishing : Epoxy Powder Coated C/w : Removable Bath Basin : Brown Vinyl PVC Padded Top : Castors - 4 x 75mm Grey Rubber : Diagonal 2 With Brakes Optional C/w Closed Cabinet And Half Shelf
MODEL: FS 137-A-1
IV TRANSFUSION / DRIP STAND MOBILE (IRRIGATOR STAND) Tubular Steel Framework Finishing: Epoxy Powder Coated 4Legged Base Mounted On 50mmSwivelling Castors C/w A Chrome-Plated Double Hook IV Pole
Model FS 137-A-2: Complete Stainless Steel : Castors: 4 x 50mm Grey Rubber MODEL: FS 137-B-1
IV TRANSFUSION I DRIP STAND (IRRIGATOR STAND) Tubular Steel Framework 5Legged Heavy Base Mounted On 50mmSwivelling Castors Finishing: Epoxy Powder Coated C/w A Chrome-Plated Double Hook IV Pole Maximum Height Adjustment - 2.2 Meter
Model FS 137-B-2: Complete Stainless Steel : Castors: 5 x 50mm Grey Rubber
MODEL: FS 137-C-1 I.V. DRIP POLE - DOUBLE HOOK Mild Steel Rod - Chrome-Plated Adjustable Height C/w Clamp For Attachment To Bedside Frame MODEL: FS 137-C-2 I.V. DRIP POLE – SINGLE HOOK Mild Steel Rod - Chrome-Plated Single Hook, Fixed Height C/w Clamp For Attachment To Wheelchair Frame
MODEL: FS 138 ANGLE POISE LAMP C/W MOBILE STAND Stand Constructed Of Tubular Steel Frame Finishing : Epoxy Powder Coated Castors: 4 x 50mmSwivelling Type C/w A Multi Flexible Lamp Arm Voltage: 240V 50Hz Model VS 138-A Standard 60 Watts Bulb - 240V / 50Hz Model VS 138-B Halogen Bulb - 240V / 50Hz Model VS 138-C C/w Transformer, Low Heat 12V Halogen Lamp
MODEL: FS 142 WARD SCREEN – MOBILE 4 FOLD C/W INDIVIUAL CURTAINS Tubular Steel Framework - 7 Legged Finishing : Epoxy Powder Coated Castors : 50mm Swivelling Type C/w 4 Pcs. Blue Curtain Size Of Each Panel / Fold - 560mmW x 1850mmH
MODEL: FS 143-A OXYGEN CYLINDER TROLLEY FOR 24 CU.FT I 0.7M' CYLINDER Mild Steel Construction Mobile On 2 Units 75mm Castors Finishing : Epoxy Powder Coated
MODEL: FS 143-B OXYGEN CYLINDER TROLLEY Tubular Steel Framework Finishing : Epoxy Powder Coated Mobile On 2 Units 125mm Rubber Castors For Cylinder Capacity Of Model FS 143-B-1: 48Cu. Ft – 1.4m Model FS 143-B-2: 80Cu. Ft - 2.4m Model FS 143-B-3: 120Cu. Ft - 3.4m' Model FS 143-B-4: 240Cu.Ft- 6.8m'
MODEL: FS 143-A-C OXYGEN RESUSCITATION UNIT C/w 0.7 Litres Filled Oxygen Aluminium Cylinder - Pin Index Flowmeter, Regulator, Humidifier &Adult Face Mask Mobile Trolley
MODEL: FS 146-B
SOILED SWAB RECEPTACLE – KICKBUCKET Complete Stainless Steel Castors : 3 x 50mm Grey Rubber C/w A Stainless Steel Basin - 13 Litres
MODEL: FS 146-A-2 SOILED SWAB RECEPTACLE – KICKABOUT Complete Stainless Steel Castors : 3 x 50mm Grey Rubber C/w A Stainless Steel Basin - 360mm Diameter x 100mm Deep - Height : 250mm Model FS 146-A-1 Mild Steel Constructed Frame Finishing : Epoxy Powder Coated Castors : 3 x 50mm Swivelling Type
MODEL: FS 144-B
BOWL STAND - SINGLE Complete Stainless Steel Castors : 4 x 75mm Grey Rubber C/w 2 Nos. Stainless Steel Basin - 360mm Diameter x 100mm Deep Model FS 144-A Tubular Steel Framework Finishing : Epoxy Powder Coated
MODEL: FS 145-B BOWL STAND - DOUBLE (BASIN STAND - DOUBLE DECKER) - Tubular Steel Framework Finishing : Epoxy Powder Coated Mobile On 4 Units 75mm Rubber Castors C/w : 2 Nos. Stainless Steel Basin - 360mm Diameter x 100mm Deep Model FS 145-B-1 : Epoxy Powder Coated Frame Model FS 145-B-2 : Complete Stainless Steel
Features: - Cylindrical with foot operated lid. - Inner Bin provided. Make: - Stainless steel constructed
Model VS-147-10L VS-147-22L
Size Small Medium
Volume 10 Litres 22 Litre
MODEL: FS 145-A-2 BOWL STAND - DOUBLE / SIDE BY SIDE Complete Stainless Steel Frame Castors : 4 x 75mm Grey Rubber C/w 2 Nos. Stainless Steel Basin - 360mm Diameter x 100mm Deep Model FS 145-A-1 Tubular Mild Steel Frame Finishing : Epoxy Powder Coated
MODEL: FS 152-A DOUBLE SOILED LINEN TROLLEY C/W 2 CANVAS BAG Tubular Steel Constructed Framework Finishing : Epoxy Powder Coated Castors : 4 x 75mm Grey Rubber 2 Nos. Canvas Bag - Removable With Draw Strings Bag Size: 460mm Diameter x 750mm Deep Overall Size: 920mmL x 500mmW x 850mmH Model FS 152-B : Stainless Steel Framework
MODEL: FS 153-A SINGLE SOILED LINEN TROLLEY C/W ONE CANVAS BAG Tubular Steel Constructed Framework Finishing : Epoxy Powder Coated Castors : 3 x 75mm Grey Rubber One Canvas Bag - Removable With Draw Strings Bag Size : 460mm Diameter x 750mm Deep Overall Size: 460mmL x 850mmH Model FS 153-B : Stainless Steel Frame
MODEL: FS 154-A LINEN TRUCK / CLEAN SOILED LINEN FOR LINEN CHANGING PURPOSES Tubular Steel Constructed Framework Finishing : Epoxy Powder Coated Castors : 4 x 100mm Grey Rubber One Canvas Bag - Removable With Draw Strings Bag Size: 460mm Diameter x 750mm Deep C/w 3 Shelves For Clean Linen Storage & Distribution Pushing Handle At One End Size: 850mmL x 460mmW x 900mmH Model FS 154-B : Stainless Steel Frame
MODEL: FS 161
TROLLEY TRANSPORT LINEN-DISTRIBUTION Tubular Steel Framework 4 Nos. Steel Sheet Constructed Shelves - Reinforced Finishing : Epoxy Powder Coated Castors : 4 x 125mm Grey Rubber Size: 1500mmL x 600mmW x 1650mmH
MODEL: FS 168
SOILED LINEN COLLECTION TROLLEY FOR WET & DIRTY LINEN Trolley Constructed Of Stainless Steel Material Mounted On 4 Units 100mm Ball Bearing Grey Rubber Castors C/w A Fibreglass Tank Tank Size: 750mmL x 550mmW x 600mmW Tank Can Be Either In Red Or Blue Colour
MODEL: FS 150 MAYO INSTRUMENT STAND – MBILE TRAY ARM HEIGHT ADJUSTABLE
- Tubular Steel Framework - Finishing : Epoxy powder coatexd - Casters: 4 x 50mm Swivelling type
Model FS 150-A-1: stainless steel Tray – Size : 425 x 275mm Model FS 150-B-1: stainless steel Tray – Size : 550 x 330mm Model FS 150-A-2: Complete Stainless Steel Framework Model FS 150-B-2: Complete Stainless Steel Framework
MODEL : FS 150-C STAINLESS STEEL MAYO INSTRUMENT TRAY STAND
- Complete Stainless Steel - Flat Bar Front - Adjustable Height - Tray Size : 2 x 75mm Gray Rubber
MEDICAL DEFIBRILLATOR CART MODEL FA3100(NEW) Features : - Transparent perspex top (12mm thick) allowing visuals into first drawer. - Central locking system for the drawers - Protective moulded PVC bumper all round - A bracket for oxygen tank cylinder, a holder provided (for biohazard bin) & a cathether Container provided at the side of the cart. A push handle at the other side of the cart. - Cardiac board & IV drip pole attachment at rear of cart - C/w an external adjustable and swingable tray for defibrillator - Mobile on 4 x 5" swivel castors with 2 brakes diagonally fitted - Five drawers : 3 x 3" deep drawers (with ABS moulded bins - removable) 1 x 6" deep drawer 1 x 9" deep drawer Make :- Constructed from EG steel plate. - Finishing of hard epoxy powder coating Size :- 66cmL x 46cmW x 89cmH
MODEL: FS 135
PATIENT MEDICATION CART - MOBILE • Constructed In The Combination Of 24 Bins / 48 Bins • For Patient Unit Dose Dispensing • Steel Sheet Constructed, Reinforced Body • Stainless Steel Sheet Constructed Top With 25mm High Bendup
Lips On 3 Side • Finishing : Epoxy Powder Coated • Bins Of The Non Breakable Soft Plastic Type Accessories : • 2 Nos. Utility Drawers • Removable Cassette Tray With Lock For - 24 Nos. Bins • All Round Rubber Bumper Protection • Pushing Bar At One End • Central Locking For Cassette Tray And Drawers • Castors : 4 x 125mm Grey Rubber, Diagonal 2 With Brakes. • Approx Size: 760mmL x 450mmW x 950mmH Model FS 135-A : 48 Bins / 2 Cassette Trays / Double Sided Model FS 135-B : 24 Bins / 1 Cassette Tray/ Single Sided
MODEL: FS 136
EMERGENCY CART / RESUSCITATION • Steel Sheet Constructed With Reinforced Framework • Stainless Steel Sheet Constructed Top With 25mm High Bendup Lips
On 3 Side • C/w 4 Drawers Of Different Sizes, All Lockable With A Central
Locking Mechanism • Top Drawer With Fixed Partitions For Storage Of Medications Accessories : • All Round Rubber Bumper Protection • Retractable Utility Shelf • Cardiac Board Located At Rear Of Cart • Stainless Steel Double Hook IV Pole • Oxygen Cylinder Bracket • Finishing : Epoxy Powder Coated - Red Colour • Castors : 4 x100m Grey Rubber, Diagonal 2 With Brakes • Sizes: 660mmL x 460mmW x 860mmH
MODEL: FS 170 STAINLESS STEEL TRANSFER TROLLEY C.S.S.D. / T.S.S.U. • Complete Stainless Steel • Twin Heavy-Duty Hinged Doors With Securing Latches • Pushing Handle At Both End • 2 Nos. Re-Inforced Shelves • Castors : 4 x 150mm Heavy Duty Grey Rubber
Swivelling Type • Size: 1350mmL x 750mmW x 1500mmH
MODEL: FS 171
ANAESTHETIC / RESUSCITATION CART • Complete Stainless Steel Material Constructed • Cart Top With 25mm High Bend-Up Lips On 3 Sides • Cart C/w 5 Drawers-Top 3 Drawers Of Size : 550mmW x 450mmD x 75mmH
Fourth Drawer Size : 550mmW x 450mmD x 125mmH Fifth Drawer Size : 550mmW x 450mmD x 300mmH
: C/w Slide-Up And Retractable Panel Door
• All Drawers To Be Key Lockable With Central Locking Mechanism • Top 3 Drawers To Have Removable Partitioned Tray Accessories : • All Round Rubber Bumper Protection • Retractable Side Utility Shelf, Cardiac Board, Pushing Handle, Utility Shelves-2 Nos. • Tilt Out Waste Bin With Un-Exposed Waste Collection Bag • Castors : 4 x 125mm Grey Rubber Type, Diagonal 2 With Brakes • Overall Size : 600mmL x 450mmW x 900mmH
MODEL: FS 149-A D.D.A / MEDICINE CABINET WALL MOUNTED OR TABLE TOP Steel Sheet Constructed Finishing : Epoxy Powder Coated C/w Single Lockable Door With Lock & Keys 3 Nos. Fixed Sheet Metal Shelves Size: 460mmW x 230mmD x 600mmH
MODEL: FS 149-B D.D.A / POISON CABINET - WALL MOUNTED Steel Sheet Constructed Finishing : Epoxy Powder Coated C/w Twin Lockable Doors & Fixed Sheet Metal Shelves Inner Lockable Compartment For Storage Of Poison - Size: 600mmW x 230mmD x 700mmH
MODEL: FS 149-C D.D.A. / POISON CABINET - VISUAL ALARM Steel Sheet Constructed C/w Twin Lockable Doors - Fixed Sheet Metal Shelves Inner Lockable Compartment For Storage Of Poison Wall Mounted Finishing : Epoxy Powder Coated Size: 600mmW x 230mmD x 800mmH Visual Pilot Lamp - 12W DC - Activated When Doors Not Closed Transformer - AC/DC 240V - 12V (DC)
MODEL: FS 149-D D.D.A. / POISON CABINET - AUDIO VISUAL ALARM Steel Sheet Constructed C/w Twin Lockable Doors Fixed Sheet Metal Shelves Inner Lockable Compartment For Storage Of Poison - Wall Mounted Finishing : Epoxy Powder Coated Size: 600mmW x 230mmD x 800mmH Audio Buzzer - 12W DC - Activated When Inner Compartment Not Closed Visual Pilot Lamp - 12W DC -Activated When Doors Not Closed Transformer -AC/DC 240V - 12W (DC)
MODEL: FS 159-A CABINET INSTRUMENT - FREE STANDING / 2 SECTIONS • Steel Sheet Constructed • Finishing : Epoxy Powder Coated • 2 Sections - Top Section C/w Lockable Glass
Door And 3 Adjustable • Glass Shelves • Lower Section C/w Metal Lockable Door With
2 Fixed Sheet Metal Shelves • Size: 600mmW x 400mmD x 1850mmH
MODEL: FS 159-B CABINET INSTRUMENT - FREE STANDING CIW 5 NOS. ADJUSTABLE GLASS SHELVES • Steel Sheet Constructed • Finishing : Epoxy Powder Coated • Twin Lockable Glass Doors • Size: 750mmW x 400mmD x
1850mmH
MODEL: FS 159-C CABINET INSTRUMENT - WALL MOUNTED C/W 3 NOS. ADJUSTABLE GLASS SHELVES • Steel Sheet Constructed • Finishing : Epoxy Powder Coated • Twin Lockable Glass Doors • 3 Adjustable Glass Shelves • Size: 750mmW x 350mmD x 900mmH
MODEL: FS 148 • X-RAY VIEWER / ILLUMINATOR • Steel Sheet Constructed • Wall Mounted / Table Top • Finishing : Epoxy Powder Coated • Voltage : 240V 50Hz • C/w 32 Watts Lamp, ON/OFF Switch, 13A 3-Pin Plug Top,
Shadowless Perspex Fascia Model FS 148-A - Single View • Size: 380mmW x 100mmD x 510mmH
Model FS 148-B - Double View Size: 750mmW x 100mmD x 510mmH Model FS 148-C - 3-In-One Size: 1120mmW x 100mmD x 510mmH Model FS 148-D - 4-In-One Size: 1500mmW x 100mmD x 510mmH Model FS 148-E - 4-In-One C/w Mobile Stand, Epoxy Coated Size: 1500mmW x 1850mmH (Overall) Model FS 148-F - 4-Over-Four Model Clw Mobile Stand, Epoxy Coated Size: 1500mmW x 100mmD x 1100mmH (Box Size) Overall Height: 1850mm
MODEL: FS 156-B BHT TROLLEY (BED HEAD TICKET TROLLEY) PATIENT RECORD FILE / FOLDER TROLLEY • Can Accommodate 30 Aluminium Files / Folders Arranged In 2 Rows • Tubular Frame And Steel Sheet Shelf & Compartment • Pushing Handle • Finishing : Epoxy Powder Coated • Castors : 4 x 100mm Grey Rubber • C/w Or Without Aluminium Folders
MODEL: FS 156-A BHT TROLLEY (BED HEAD TICKET TROLLEY) PATIENT RECORD FILE / FOLDER TROLLEY • Steel Sheet Constructed • 2 Rows Of Storage For Folders / Files At Top , • Can Accommodate Up To 50 Files / Folders (A4 Size) • C/w : 3 Nos. Utility Drawers, Slots For X-Ray Film Envelopes • Pushing Handle At One End, Collapsible Shelf At The Other • Finishing : Epoxy Powder Coated • Castors : 4 x 'I OOmm Grey Rubber • Size: 760mmL x 500mmW x 900mmH
MODEL FS 140-A-GS SURGEON'S OPERATING STOOL 5 Legged Aluminium Base Castors : 5 x 50mm Swivelling Type 300mm Diameter PVC Padded Seat Gas Spring Assisted Revolving Seat Height Adjustment - 500mm to 600mm
MODEL FS 140-A-1
SURGEON'S STOOL ON CASTORS Tubular Steel Frame Finishing : Epoxy Powder Coated Round Revolving PVC Padded Seat Screw Height Adjustment - 450mm to 600mm Castors : 4 x 50mm Swivelling Type MODEL FS 140-A-2 Without Castors 4 Legs Mounted On Rubber Studs
MODEL: FS 140-B-1 MODEL: FS 140-B-2
SURGEON'S OPERATING STOOL CM BACKREST / 5 LEGGED ALUMINIUM BASE
Screw Height Adjustment
450mm - 600mm Revolving Seat Mobile Base - 5 x 50mm Swivelling Castors
Gas Spring Assisted Height Adjustment 500mm - 600mm Revolving Seat Mobile Base - 5 x 50mm Swivelling Castors
MODEL: FS 140-B-3 GERIATRIC CHAIR High Back With Lumbar Support Armrest - Padded Vinyl PVC Padded - Green Colour Mild Steel Frame - Chrome Plated Low Seat - 400mmH
MODEL : FS 140-B-4
RECLINABLE ARM-CHAIR (FOR DIALYSIS PATIENT) Fully Reclinable To 120° Padded With Vinyl P.U. Upholstry - Blue Colour Easy One Person Operation Extended Leg-Rest When Reclined OPTIONAL Mobile On 4 Units 50mm Grey Rubber Castors
Screw Height Adjustable Revolving Round Seat 700mm - 800mm C/w : Footrest
5 Legged Epoxy Coated Steel Base Mobile On 5 x 50mm Swivelling Castors
Screw Height Adjustable Revolving Seat With Backrest 700mm - 800mm C/w : Footrest
5 Legged Epoxy Coated Steel Base Mobile On 5 x 50mm Swivelling Castors
MODEL: FS 141-B-1 MODEL: FS 141-A-1 LAB / DISPENSING STOOL
Gas Spring Assisted Adjustable Revolving Seat With Backrest 700mm - 800mm C/w : Footrest
5 Legged Epoxy Coated Steel Base Mobile On 5 x 50mm Swivelling Castors
Gas Spring Assisted Adjustable Round Revolving Seat 700mm - 800mm C/w : Footrest
5 Legged Epoxy Coated Steel Base Mobile On 5 x 50mm Swivelling Castors
MODEL: FS 141-B-2 MODEL: FS 141-A-2 LAB / DISPENSING STOOL
MODEL: FS 175 STAINLESS STEEL COMMODE SHOWER CHAIR Mobile On 4 x 75mm Grey Rubber Castors Rear 2 With Brakes C/w : Seat With Cover
Bracket To Hold An Adult Bedpan Backrest, Armrest & Leg rest
MODEL: FS 147-B KICK – STEP STOOL Mild Steel Constructed Epoxy Power Coated PVC Padded Step Top Castors - 4 x 50mm Swivelling Type
MODEL: FS 139
CANVAS STRETCHER C/W WOODEN POLES C/w : 2 Nos. Rounded Wooden Poles With Hand Grip
2 Nos. Epoxy Coated Steel Traverse Bars 1 No Beige Colour Canvas - 1850mm x 560mm Overall Size: 1980mmL x 560mmW
Optional Model FS 139-A: Aluminium Poles C/w Hand Grip
MODEL: FS 162 BED ELEVATOR FOR ALL STANDARD STEEL FRAME BEDSTEAD Tubular Steel Framework Finishing : Epoxy Powder Coated 4 Legged Mounted On Non-Slip Rubber Studs 4 Elevated Positions
MODEL: FS 164 TROLLEY FOR SUCTION PUMP - ALL STANDARD SINGLE BOTTLE TYPE Tubular Steel Framework Finishing : Epoxy Powder Coated Castors : 4 x 50mm Swivelling Type Size: 400mmL x 380mmW x 400mmH
MODEL: FS 166 CANVAS STRETCHER C/W TRANSFER TROLLEY Trolley : Constructed Of Tubular Steel Frame Finishing : Epoxy Powder Coated Castors : 4 x 125mm Grey Rubber Type C/w : A Canvas Stretcher With Rounded Wooden Poles, Steel Traverse Bars And Beige Colour Canvas Size : 1980mmL x 560mmW x 800mmH
MODEL: FS 173 ARM RACK FOR PHARMACY USE C/W ORGANISING BINS - Mild Steel Constructed - Epoxy Powder Coated - Mobile On 4 Units 100mm Grey Rubber Castors, Diagonal 2 With Brakes - UNICA BINS Small Size : 6 Nos. Approx Size: 75mmW x 150mmD x 60mmD Medium Size: 12 Nos. Approx Size: 100mmW x 175mmD x 75mmD Large Size : 12 Nos. Approx Size: 150mmW x 200mmD x 100mmH Overall Size: 920mmW x 1600mmH
MODEL: FS 167 MIDWIFERY BAG FOR MIDWIFE'S HOUSE CALL - Blue PVC Sling Bag - C/w Fixed Compartments And Carrying Handle - Size: 300mmL x 250mmW x 150mmD
MODEL: FS 169 SWAB COUNTING RACK C/W 40 HOOKS ARRANGED IN 4 ROWS - Trolley Constructed Of Stainless Steel Material - Mounted On 4 Units 100mm Ball Rubber Castors - C/wA Removable Stainless Steel Drip Pan MODEL: FS 174-B
STAINLESS SS STEEL BED PAN /URINAL RACK - Mobile Stand With 4 x 100mm Grey Rubber Castors - For Storing- 0 Nos. Bed Pans - 10 Nos. Urinals - C/w Removable Drip Pan