FPS Series LED Flat Panel Product ComparisonPhone: 1-855-303-0665 | Fax: 1-818-936-0645 | Web: |...

Phone: 1-855-303-0665 | Fax: 1-818-936-0645 | Web: www.divalite.com | Email: [email protected] Revised: 12-20-17

FPS Series LED Flat Panel

Product Comparison


1.1. General Appearance

Diva Light Generic Brand

FPS series LED panels feature a simple and elegant ap-

pearance and a manufacturer-exclusive screw-free de-

sign.

Generic brand panels have no recognizable identity and

look similar to most panels in the market.

1.2. Frame


Thickness: 11.46 mm

Weight: 1.41 lbs

Thickness: 9.39 mm

Weight: 1.15 lbs

1. Appearance


1.3. Driver


FPS series drivers are tightly fixed into the panel but

can easily be removed and replaced. By removing the

screws. The panel is still reusable just by replacing the

driver.

Generic brand panels have the driver permanently fixed

into the panel. If the driver stops working, the whole

fixture needs to be replaced.

1.4. Earthquake Clips


Diva Light features six quality earthquake clips for bet-

ter safety and stability.

Generic brand panels only come with four earthquake

clips.


1.5. Installation Flexibility

Recessed installation

Suspension installation

Surface-mounted push-in frame installation


2.1. LED Protector


The LED protector is a little higher than the LED chips to

effectively protect the LEDs from expansion from hot

environments or pressure from shaking during ship-

ping.

The LED protector is in limited quantity only and is

placed only on the edges.

2.2. UV Solidity Technology


This is for better insulation for the welding spots and to

protect the welding spots from tension during produc-

tion and shipping.

This feature is not present in most generic brand LED

panels.

2. Structure


2.3. LED lined


FPS series manufacturers have ten years experience in

SMT technology to ensure LEDs are lined neatly for

even light output and to prevent brighter or darker

spots on the panel surface.

Generic brand LEDs are not aligned very neatly and can

cause brighter or darker spots on the panel surface.

2.4. Gold wire


Diva Light panels use gold wires to connect the LED chip

for better heat dissipation and flexibility. Reliable for

five years warranty.

Generic brand panels use alloy wires to connect the

LED chip, which are not as good and can easily break.


2.5. Light Guide Plate


Thickness: 3.016 mm Thickness: 2.987 mm

2.6. Diffuser


Thickness: 1.201 mm Thickness: 1.201 mm


2.7. Back Plate


Thickness: 0.632 mm

UL recommended: 0.6 mm

Thickness: 0.373 mm

UL recommended: 0.6 mm

FPS Series LED Flat Panel Product ComparisonPhone: 1-855-303-0665 | Fax: 1-818-936-0645 | Web: |...

Documents

Transcript of FPS Series LED Flat Panel Product ComparisonPhone: 1-855-303-0665 | Fax: 1-818-936-0645 | Web: |...